bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Citadel 4items
  2. Windlass 2items
Less
Stock
  1. Out of Stock 6items
Rating
  1. 4
    & up
    1item
Set Ascending Direction

6 Items

  1. Citadel - Japanese Aikuchi - Special Salamander - craft knife

    aikuchi

    processing
    The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

    Type of production: Artisan
    Country of production: Cambodia
    Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
    Habaki: copper
    Tsuka: samekawa (breed skin)
    Saya: Lacquered wood and water buffalo horn
    Blade length: 170mm. (including habaki)
    Total length: 275mm.
    Weight: 210g. without saya

    Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

    CI-AI-SAL
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  2. Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger

    The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.

    The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.


    Production: artisan
    Blade: carbon steel
    Handle: wood
    Knob: steel
    Guard: steel
    Sheath: leather and steel
    Blade length: 29cm.
    Total Length: 42.5cm.
    Blade width: 35mm.
    Blade thickness: 4mm.
    Weight: 328g.
    Balancing: -

    400806
    €110.66
    Only 0 left
    Only 0 left
    Out of stock
  3. Citadel - Japanese Aikuchi - Special Salamander - Handmade knife

    Type of production: Artisan
    Country of production: Cambodia
    Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
    Habaki: copper
    Tsuka: samekawa (ray skin)
    Saya: Lacquered wood and water buffalo horn
    Blade length: 122mm. (including habaki)
    Total length: 222mm.
    Weight: 110g. without saya

    Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

    CI-ASAL
    €393.44
    Only 0 left
    Only 0 left
    Rating:
    93%
    4.7
    Out of stock
  4. Citadel - Japanese Aikuchi No.1 Small - 502S - custom knife

    These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

    Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
    Hamon: Gunome style
    Bo-Hi: absent
    Total Length: 23.3cm.
    Blade length: 11.8cm.
    Blade thickness: 3.5mm.
    Balance: on guard
    Length Grip: 8.5cm.
    Weight: 136g.
    Saya: black lacquered wood with buffalo horn finishes
    Tsuka-ito: Black cotton on the same (white skin) white
    Sageo: absent
    Fuchi and Kashira: in buffalo horn
    Menuki: bronze
    Habakia: Copper
    Notes: Sold with silk sheath and cordura carrying case.

    3951
    €377.05
    Out of stock
  5. Citadel - Tanto Luxe Inciso - 130 - craft knife

    These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
    The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

    Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
    Hamon: Gunome style
    Bo-Hi: absent
    Total length: 38.5cm.
    Blade length: 23.3cm.
    Blade thickness: 6.5mm. / 3mm.
    Balancing: Advanced 2.5cm from Tsuba
    Handle Length: 9.5cm.
    Tanto weight: 372g.
    Weight with Saya: 488g.
    Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
    Tsuka-ito: beige cotton on the same white (breed leather)
    Sageo: absent
    Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
    Menuki, seppa, shitodome: bronze
    Habaki: copper
    Notes: The Tanto is sold with a silk sheath and carrying case cordura.

    Small technical glossary: ​​Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade

    CI-TA-B
    €754.10
    Out of stock
  6. Museum Replicas Windlass - Italian Bastard Sword 500890 - PRIVATE COLLECTION - Artisan Sword

    sword withdrawn from a private collection - In excellent condition, only the blade has a scratch following the removal of an engraving (visible in the attached photos)

    Checked and certified by our internal Coltelleria Collini laboratory.

    KNIFE RETIRED FROM PRIVATE COLLECTION
    * Type: Previously Purchased and Used
    * Condition: Excellent condition
    * Marks on blade: YES
    * Marks on handle: NO
    * Box: Present
    * Scabbard:  Scabbard
    * Manuals, Certificates and Warranties: Yes
    * Checked and Certified by our internal laboratory

    This splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so you can use a second hand as support while still being able to use the sword with one hand thanks to its weight and small dimensions.

    Blade: carbon steel
    Handle: leather
    Knob: carbon steel
    Guard: carbon steel
    Sheath: leather and steel
    Blade length: 86cm.
    Total Length: 105cm.
    Blade Width: 45mm.
    Blade thickness: 5mm.
    Weight: 1580g.
    Balancing: -

    AP8687
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
Set Ascending Direction

6 Items





ecommerce sicuro