Agosto 2016
-
ExtremaRatio - Nightmare Karambit - Stone Washed - folding knife
Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.
Intended use: Tactical / Rescue
Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Stone Washed
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher12622 -
Benchmade - 730S Elishewitz knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition
* Available on the market: no longer in production, difficult to find, dating back to 2001
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Benchmade logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Tactical
Type of production: Industrial
Production Lama: USA
Blade: 154CM 59/61 HRC steel
Blade treatment:
Handle: G10
Blade length: 85mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 12mm. (16mm. Clip included)
Balancing: -
Weight: 119g.
Closure: Axis Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: cardboard box with Benchmade logos
Note:AP-BM-730S -
Benchmade - 845S Ascent knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition
* Available on the market: no longer in production, difficult to find, dating back to 2001
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Benchmade logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Tactical
Type of production: Industrial
Production Lama: USA
Blade: ATS-34 59/61 HRC steel
Blade treatment:
Handle: zytel
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 132mm.
Total length: 235mm.
Thick when closed: 12mm. (16mm. Clip included)
Balancing: -
Weight: 92g.
Closure: Back Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: cardboard box with Benchmade logos
Note:AP-BM-845S -
Benchmade - 830S Ascent knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition
* Available on the market: no longer in production, difficult to find, dating back to 2001
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Benchmade logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Tactical
Type of production: Industrial
Production Lama: USA
Blade: ATS-34 59/61 HRC steel
Blade treatment: -
Handle: zytel
Blade length: 88mm.
Blade thickness: 2.5mm.
Closed length: 122mm.
Total length: 210mm.
Thick when closed: 12mm. (16mm. Clip included)
Balancing: -
Weight: 72g.
Closure: Back Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: cardboard box with Benchmade logos
Note:AP-BM-830S -
Benchmade - 840 Ascent knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition
* Available on the market: no longer in production, difficult to find, dating back to 2001
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Benchmade logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Tactical
Type of production: Industrial
Production Lama: USA
Blade: ATS-34 59/61 HRC steel
Blade treatment: -
Handle: zytel
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 132mm.
Total length: 235mm.
Thick when closed: 12mm. (16mm. Clip included)
Balancing: -
Weight: 92g.
Closure: Back Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: cardboard box with Benchmade logos
Note:AP-BM-840 -
Benchmade - Sequel 650S-BLK - Boguszewski Design - COLLEZIONE PRIVATA - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available: no longer in production, difficult to find
* Sharpening: Original
* Marks on blade: no
* Marks on handle: -
* Box: original, in cardboard with Benchmade logos
* Scabbard: no, only cotton bag with Benchmade logo
* Manuals, Certificates and Warranties: original
* Checked and certified by our in-house laboratoryIntended Use: Tactical
Type of production: Industrial
Blade Production: USA
Blade: ATS-34 steel 59/61 HRC
Blade treatment: -
Handle: Aluminium
Blade length: 100mm.
Blade thickness: 2,5mm.
Length closed: 132mm.
Total length: 235mm.
Thickness when closed: 12mm. (16mm. clip included)
Balance: -
Weight: 115g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: cardboard box with Benchmade logos
Notes: design by Phil BoguszewskiBM-650S-BLK-CP -
Benchmade - Sequel 707S McHenry & Williams - G10 Black - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION - FIRST PRODUCTION RUN NO. 553/1000
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available: No longer in production, difficult to find
* Sharpening: Original
* Marks on blade: no
* Marks on handle: slight abrasions on clip
* Box: original, cardboard with Benchmade logos
* Scabbard: no, only cotton bag with Benchmade logo
* Manuals, Certificates and Warranties: original
* Checked and certified by our in-house laboratoryIntended Use: Tactical
Type of production: Industrial
Blade Production: USA
Blade: Steel 154CM 58/61HRC
Blade Treatment: -
Handle: Aluminium with Black G10 insert
Blade length: 75mm.
Blade thickness: 2,5mm.
Length closed: 96mm.
Total length: 171mm.
Thickness when closed: 10,5mm
Balance: -
Weight: 71g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: design by McHenry & WilliamsBM-707S-CP -
Benchmade - Sequel 707 McHenry & Williams - G10 knife
Intended use: Tactical
Type of production: Industrial
Production Lama: U.S.A.
Blade: steel 154CM 58 / 61HRC
Blade treatment: -
Handle: aluminum with insert in Black G10
Blade length: 75mm.
Blade thickness: 2.5 mm.
Closed Length: 96mm.
Overall length: 171mm.
Thick when closed: 10,5mm
Balancing: -
Weight: 73g.
Lock: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: design by McHenry & WilliamsBM-707 -
Benchmade - 710 Family McHenry & Williams D2 - G10 knife
Model 710 was designed by custom knife makers Bill McHenry and Jason Williams and premiers Benchmade's patented AXIS™ lock which was also designed by Bill and Jason. It looks simple enough, and it is, but it's the end result of a lot of hard work and perseverance by Bill and Jason, over the course of 4 years. The AXIS™ lock is totally ambidextrous and allows for easy one-handed opening and closing of the blade without your fingers ever being in the path of the blade. The design is very intuitive to operate with little or no instruction needed on how the lock functions.
As simple as the lock is, perhaps its biggest selling feature is its brute strength. In testing, the lock supported a negative load of over 200 pounds without damage. When the lock does finally fail, the liners simply crack over the locking pin, but at no time in Benchmade's testing would the blade have closed on the users hand. The AXIS™ lock features two "Omega" shaped springs that provide outstanding functional redundancy. The springs are lightly stressed and our tests show they should last indefinitely. In the unlikely event that one of the springs does fail, the other will still operate the knife just fine.
Is this the strongest lock made? That's very difficult to say for certain. Benchmade claims that i's certainly more rugged than many of the typical lock-back and liner-locking knives. The sizable 3.90" D2 Tool Steel blade of the 710 features a reverse-curve grind for increased cutting ability. The double liners are heat-treated 420 stainless steel as is the locking-bar. There is a removable, stainless steel pocket-clip located on the butt end of the knife. This given clip location on the butt end is necessary due to the locking mechanism. If the clip were positioned on the pivot end, the knife would protrude much too far out of your pocket.
Features- Reverse Curve Blade Shape
- Larger Sized Folder
- D2 Tool Steel Blade
- Machined G10 Handle Scales
- Country of Origin: USA
Specifications
- Blade Length: 3.90"
- Blade Thickness: 0.115"
- Blade Material: D2 Tool Steel
- Blade Hardness: 59-61HRC
- Blade Style: Modified Clip-Point; Ambidextrous Dual Thumb Studs
- Weight: 4.50oz.
- Clip: Black, Reversible, Tip-Up
- Lock Mechanism: AXIS
- Overall Length: 8.80"
- Closed Length: 4.90"
AXIS® A patented Benchmade exclusive, AXIS has been turning heads and winning fans ever since its introduction. A 100-percent ambidextrous design, AXIS gets its function from a small, hardened steel bar which rides forward and back in a slot machined into both steel liners. The bar extends to both sides of the knife, spanning the liners and positioned over the rear of the blade. It engages a ramped, tang portion of the knife blade when it is opened. Two omega style springs, one on each liner, give the locking bar it’s inertia to engage the knife tang, and as a result the tang is wedged solidly between a sizable stop pin and the AXIS bar itself.
BM-710 -
ExtremaRatio - Shrapnel OG Satin in San Mai CoS - knife
For this new exclusive collaboration with Extrema Ratio we decided to propose a best seller in the world of cutlery, the Shrapnel model. It's a satin blade version but the most important thing is that has been used, for the first time in Italy, the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used the CoS (Cobalt Special, considered mechanically superior by 25% compared to the already appreciated VG10) for the central plate and the 420J2 (55 HRC) for the two side plates, in order to have a high cutting capacity, but at the the same time a remarkable resilience and resistance to oxidation.
A First Production Run of 30 pieces has been made.
SHRAPNEL OG is a truly versatile “back up” knife with marked combat qualities. Its leaf-shaped blade is flat ground at a characteristically low angle to a wide, extraordinarily sharp edge. The included hard sheath can be worn vertically, horizontally or obliquely (at a 45° angle). Tthe SHRAPNEL OG hilt design does not include a guard.
Use: tactical , sports , hiking , collection
Blade: Full , Japanese- rolled stainless steel ( San Mai) with sharp CoS to 61,7HRC in cryogenic tempering
Handle: Forprene
Blade length: 90mm.
Blade Thickness: 6.5 mm.
Overall length: 210mm.
Balancing: back to 0.5cm . by guard branch
Weight: 214g.
Sheath: ABS with Tek - Lok multi attack
Notes: cardboard box with Extremaratio logos and certificate
Clad Metal
It is a composite metal partly or entirely diffusion bonded together of different kinds of metals.
Metal composition shows higher performance which respective materials alone do not possess and the performance complements opposite characteristics of each material, that is "compound characteristics"Clad Effect on Cutleries
Toughness
Like Japanese swords, clad metal is hard to break or bend, thanks to the toughness as the hard steel part is clad with soft steels.
Easy to work on
Cladded structure is easy to apply on such works as forging, grinding, sharpening or polishing to make a sharp blade.
Improved corrosion resistance
Proper material combination generates electrical potential difference and it enhances the corrosion resistance on blade edge.
Better and long lasting sharpness
Steel after forging pressure makes the microscopic structure denser and improves the sharpness and ensures long lasting performance.
Resource saving
As high class steel is used only for necessary part, it is perfectly cost effective..
Easy distortion correction
As the steel is bonded with soft steel materials, its blade is hard to break and the distortion correction is easy.
Easy drilling and welding after heat treatment
Though the steel gets harder after heat treatment, the soft steel never loses its softness, enabling the material to be drilled or welded.
Design improvement
Laminated patterns or Damascus patterns appear from basis materials which are bonded with different kinds of metals.ERCC-SH -
Helle Norway - Skala Foldekniv knife - No.212
Intended use: hunting
Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -HE-212 -
Kukri Crafts - Service 1 Nepal knife - knife
Blade: Carbon steel
Conformation: Flat blade
Kauri: Discovered
Aunlo-Bal: single black line engraved
Manicure: Black horn of polished and engraved buffalo
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9 mm.
Total length: 380 mm.
Karda: 120 mm.
Chakmak: 115 mm.
Weight: 490g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand3611