Clippers for animals, heads and accessories

Extra Large size - suitable for animals over 45 kg.

FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.

WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.

HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.

BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.

DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.

CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.

DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.

FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cut

TOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.

Extra Small size - suitable for very small animals or puppies. Also ideal for rabbits and ferrets

FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.

WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.

HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.

BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.

DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.

CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.

DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.

FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cut

TOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.

Extra Small size - suitable for very small animals or puppies. Also ideal for rabbits and ferrets

FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.

WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.

HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.

BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.

DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.

CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.

DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.

FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cut

TOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.

Indicato per cani a pelo corto di taglia media, con peso da 9.5 a 23kg

FURminator ha stabilito gli standard nella categoria con un innovativo strumento per la tolettatura che riduce la perdita di pelo meglio di qualsiasi spazzola, pettine o pettine a rastrello.

COSA FA ?
Rimuove con estrema efficacia il pelo morto ed il vello (sottopelo) dall'animale.

COME FUNZIONA?
Come una normale spazzola: basta infatti pettinare l'animale nel verso del pelo, senza imprimere forza o pressione, con movimenti naturali e fluidi.

MA TAGLIA IL PELO ALL'ANIMALE?
Assolutamente no, si limita a rimuovere il pelo morto già presente nel mantello.

VA A BATTERIE?
No, si tratta di una particolare spazzola con pettine metallico che cattura e rimuove il pelo.

PUO' FERIRE L'ANIMALE?
Assolutamente no, il pettine in acciaio è infatti concepito per essere confortevole e per non creare abrasioni o fastidi in fase di utilizzo.

RICHIEDE MANUTENZIONI PARTICOLARI?
Va trattato come una normale spazzola da grooming e da toelettatura, senza particolari manutenzioni.

CARATTERISTICHE
- Riduce la perdita di pelo fino al 90%, rimuovendo il sottopelo e i peli morti senza danneggiare il pelo di copertura.
- Risultati ottimali su cani e gatti a pelo lungo o corto provvisti di sottopelo.
- Stimola gli oli naturali presenti nel mantello dell'animale per un effetto sano e lucente.
- Riduce il numero di particelle presenti nell'aria che possono indurre reazioni allergiche.
- Aiuta ad eliminare i boli di pelo nei gatti
- Non taglia

ISTRUZIONI DELL'ATREZZO
Dal momento che lo strumento FURminator deShedding provoca la rimozione di una quantità notevole di pelo, posizionare l'animale all'aperto.
Con il bordo e i denti del dispositivo rivolti verso il mantello, passare CON DELICATEZZA lo strumento sul mantello dell'animale seguendo la direzione della crescita del pelo.
Il tempo necessario alle operazioni di rimozione del pelo con lo strumento FURminator deShedding varia a seconda della razza e delle condizioni del mantello.
In caso di perdita di pelo eccessiva, causata da problemi di salute o da una dieta errata, consultare un veterinario.
Lo strumento FURminator è progettato per la rimozione del mantello invernale.
Il bordo dello strumento FURminator, dotato di un pettine fine e ad alta precisione, deve essere protetto con l'apposito rivestimento qualora non venga utilizzato.
FURminator Inc. declina ogni responsabilità in caso di rottura dei denti del bordo dello strumento deShedding.
Lo strumento FURminator deShedding può essere utilizzato su altri animali di grandi dimensioni, quali ad esempio i bovini ed equini, ad esclusione di criniera e coda.

IN OMAGGIO

Shampoo a secco per cani arricchito con Omega 3 & 6, Vitamina E, Calendula ed Aloe Vera, aiuta a sciogliere i nodi negli animali a pelo lungo per poterli spazzolare più facilmente, venduto in pratica confezione spray da 250ml.

INFORMAZIONI:
Prodotto in USA con processi a basso impatto ambientale in aziende eco certificate, non contiene paraben e suoi derivati nè conservanti o coloranti chimici.

USO:
Spruzzare generosamente sul mantello e successivamente strofinare con un panno pulito ed asciutto. Non è necessario risciacquare. Ripetere se necessario.

AVVERTENZE:
Per uso esterno su animali con più di 6 settimane di età. Evitare il contatto con gli occhi. In caso di irritazioni, sospendere il trattamento e consultare un veterinario.

INGREDIENTI:
Natural Surfactants, Water, Hydrolyzed Wheat Protein, Hydrolyzed Oat Protein, Omega 3 & 6 Fatty Acids, Cranberry Seed Oil, Kava Extract, Calendula Extract, Vitamin E, Chamomile Extract, Aloe Vera, Papaya Leaf Extract, Safflower Seed Oil, Sunflower Seed Oil, Colloidal Oatmeal

Professional cutting head for cattle. Interchangeable, stainless steel, resharpenable. For Heiniger clippers.

Lower blade: 21 teeth - 3 mm pitch.
Upper blade: 23 teeth - pitch 2.6 mm.

The Heiniger No. 703 - 530 cutting head is designed specifically for the care and shearing of equines, such as horses and ponies. Heiniger is a well-known manufacturer of animal shearing and grooming equipment, and is renowned for the quality and reliability of its products.

It is designed to offer high-level performance and a precise cutting result. It features sharp blades made of high-quality steel that ensure efficient and even shearing. The blades are designed to cut equine hair effortlessly and safely, minimizing the risk of injuring the animal during shearing.

Lower blade: 31 teeth - 2 mm pitch.
Upper blade: 15 teeth - pitch 4 mm.

This professional shearing machine is exclusively suitable for shearing of: horses or cattle

Specifications:

Size (W - H - L): approx. 80mm x 75mm x 290mm
Weight without cable: 1245gr.
Power: normal voltage 230 volts - normal power 120 watts

Equipment:

1 - Hair clipper with head
1 - Special screwdriver
1 - Bottle of lubricating oil
1 - Cleaning brush
1 - Instruction manual
1 - Carrying case

Each clipper before being shipped is checked by our in-house sharpening laboratory

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 1/20 mm.
Cutting comb width: 40 mm.
Tooth pitch: 1 mm.
Use: Surgical use

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250, 1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 1/10 mm.
Cutting comb width: 40 mm.
Tooth pitch: 1.2 mm.
Use: Surgical use

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 1 mm.
Cutting comb width: 41 mm.
Tooth pitch: 1.6 mm.
Use: Surgical use - Paws (all breeds)

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 3 mm.
Cutting comb width: 43 mm.
Tooth pitch: 2.4 mm.
Use: Cheeks (Schnauzers, Terriers) - Muzzle (Poodles) - Underbelly (All breeds, Horses, Cattle)

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 5 mm.
Cutting comb width: 39 mm.
Tooth pitch: 2.85 mm.
Use: Trunk (Schnauzers, Terriers, Poodles) - Long-haired coat (All breeds) - Horses and Cattle

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 7 mm.
Cutting comb width: 43 mm.
Tooth pitch: 3.06 mm.
Use: Body (Schnauzers, Terriers, Poodles) - Final shearing (All breeds) - Horses and Cattle

Moser cutting heads are universal and designed for both clippers and shearers. This head is therefore suitable for both humans and dogs and cats

Professional, interchangeable, resharpenable stainless steel cutting head for Moser 1225, 1245,1247,1250,1260, 1261, 1262 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting length: 9 mm.
Cutting comb width: 43 mm.
Tooth pitch: 3.06 mm.
Use: Shearing effect with scissors (Schnauzers, Terriers, Poodles) - Preparation for shearing with very long hair (All breeds) - Trimming for muzzle and ears of Horses and Cattle

Moser - Double-Sided Brush - 2999-7025

Stainless steel bristles for hair removal and plastic bristles for a shiny, silky coat

Use:

Go over the hair to be removed with the steel bristles and use the plastic bristles to ensure a silky, shiny hair.

Cleaning:

The hair remaining on the handle can be easily removed with a damp cloth.

Original replacement cutting head for Moser Rex 1230 clipper.

Set includes two screws, a cutting head and a baseboard.

Moser - Rex

Made in Germany professional flush mount animal clipper

15W oscillating armature polarized motor for continuous service
Suitable for cattle, horses, dogs and cats
Good cutting capabilities
Low noise level, suitable for nervous animals
Resharpenable stainless steel cutting head
MultiClick system for adjusting cutting length from 0.7 to 3 mm.
Lubricating oil
Blade cleaning brush
3 meters of electric cord
One-year warranty

Good for professional use-great for private use- Guaranteed inspection by our in-house service and resharpening laboratory.

We recommend constant lubrication using the oil provided inside the package to be applied to the blades after each use.

Professional, interchangeable, re-sharpenable stainless steel cutting head for Moser 1225, 1245, 1247 and 1290 animal clippers also compatible with almost all brand-name clippers that support quick-release heads (such as Wahl and Ermilia)

Cutting height: 2.3 mm.
Cutting comb width: 66 mm.
Tooth pitch: 2 mm.
Use: animals

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 1.6 mm.
Cutting width: 43 mm. about
Teeth pitch: 1.4 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 1.2 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 13 mm.
Cutting width: 42 mm. about
Teeth pitch: 4.5 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.5 mm.
Cutting width: 42 mm. about
Teeth pitch: 1.2 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 13 mm.
Cutting width: 42 mm. about
Teeth pitch: 1.8 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 9.5 mm.
Cutting width: 41 mm. about
Teeth pitch: 4.5 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.25 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 9.5 mm.
Cutting width: 42 mm. about
Teeth pitch: 1.8 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 6.3 mm.
Cutting width: 41 mm. about
Teeth pitch: 4 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.8 mm.
Cutting width: 19 mm. about
Teeth pitch: 1.2 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.02 mm.
Cutting width: 39.5 mm. about
Teeth pitch: 0.7 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 6.3 mm.
Cutting width: 41 mm. about
Teeth pitch: 1.8 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 3.2 mm.
Cutting width: 41 mm. about
Teeth pitch: 4 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 0.8mm.
Cutting width: 19 mm. about
Teeth pitch: 1.2 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 3.2 mm.
Cutting width: 41 mm. about
Teeth pitch: 1.8 mm. about

Professional cutting head. Interchangeable, stainless steel, can be resharped. For shearing animals with Oster A5 clipper and othes of different brands that support the heads quick release (such as Moser, Aaesculap and Wahl)

Cutting height: 2.0mm.
Cutting width: 43 mm. about
Teeth pitch: 1.4 mm. about

Professional pet clipper, "made in the USA", with 230V - 50/60Hz, 3200 rpm, 45W dual speed motor.

Oster Cryogen-X head with 3.2mm cutting height included in the package; the new Cryogen-X heads are about 20°C cooler than normal heads when in use.

Suitable for dogs, cats, horses and cattle or for veterinary use

Excellent cutting capacity

Induced motor + stator (electric motor principle)

Medium level of vibration and heating

Special oil lubricant

Clipper grease

Carbon for clipper

3 metres of electric cable

One-year warranty

Recommended for professionals or individuals with thick-haired animals

Guaranteed inspection by our in-house service and resharpening laboratory.

We recommend constant lubrication using the oil supplied in the pack to be applied to the blades after each use.

Professional Hair Clipper with Japanese production power grid. ABS body, size 19x5 cm., Weight approx. 480 gr. (wire not included), single speed motor 30W.

The package includes: clipper, 2 cutting heads.

HEAD INCLUDING:
* # 1 with cutting height of 3mm.
* # 000 with cutting height of 0.25mm.

Good for professionals, excellent for individuals - Check guaranteed by our laboratory assistance and regrinding. - We recommend a constant lubrication chart using the oil supplied in the package to be applied on the blades after each use.

Thrive - 808-2 30W - Professional Clipper without blades

  This product is NOT equipped with cutting heads, sold separately. Professional Hair Clipper Japanese production with mains supply. ABS body, size of 19x5 cm., Weight ca. 480 gr. (Except wire), single speed motor 30W

Good for professionals, good for individuals - control guaranteed by our laboratory assistance and regrinding. - We recommend using a constant lubricating oil supplied in the package to be applied on the blades after each use. IMPORTANT: Are available on request spare heads in different heights for both men and animals. For information, contact us via email or by phone as well.

Thrive - ATTACHMENT COMB  Thrive 801, 805 e 808

Set of metal reinforced attachment combs 5, 9, 13 mm

WARNING: the attachment comb can be mounted on heads with max 3 mm cutting height.

Wahl - head 8.5 - 2.8 mm - 2362-116

• Suitable for all breeds of dogs, cats and horses
• Perfect for trimming long-haired breeds that do not need much fur from their coats
• Includes oil pipette and instruction booklet
• Made in the United States
• Fits WAHL KM model and most OSTER and ANDIS removable clippers
• Leaves hair 2.8 mm

STAINLESS STEEL SET 1247-7440 Set of universal stainless steel attachment combs 3, 6, 10, 13, 16, 19, 22, 25 mm

Works with max45, max50, WAHL Competition Series and ULTIMATE Competition Series.

The set for all your needs! Thin stainless steel teeth provide even results! Secure fit – clicks into position on blade set. Solid stainless steel teeth guarantee longer service life.Approach the desired cutting length progressively using a range of different comb sizes available!

Sizes range from 3 - 25 mm.

Colour coding system means that comb sizes can be easily recognised.

Lubricating oil for maintenance of clippers and heads.

PLEASE NOTE: Depending on stock availability, the item may be substituted with another with the same characteristics.

Animal shearing scissors made entirely of brushed stainless steel.

These scissors, made in Premana, have an 8" curved blade and are ideal for grooming dogs and small animals.