Anno 2017

JEM - Baby-Nursery-themed sugarpaste cutters set - CAKE DESIGN - PROMO

Create delicious decorative designs with fondant or gum paste using these plastic cutters. Set includes: - 12 sugarcraft cutters. - 9 cutters: 2 baby, bottle, dummy, rocker, booties, bib, rattle, pram and baby face This wonderful set consists of a variety of different sitting babies, plus standing and crawling babies. It also has a variety of accessories i.e. nappy, babygrow, flower fairy dress, chef's hat, fairy party .

The cutters are made from plastic and come with instructions.

Perfect for christening, baby parties and first birthday cakes as well as fairy fantasy cakes.

Suitable for creating toppers on cakes and sides using gum paste

The Dovo “Inversion” 244 9505 is Dovo’s top class shears for the lefties, with a razor sharp and hollow ground blade cutting edge as well as a convex blade profile. The “Inversion” has the famed Dovo “Micro Motion” PTFE-enabled spring-loaded pressure plate to hold the center screw, which gives a more responsive feel to the scissoring action and a certain ease to starting and finishing the scissor action. The convex blade surfaces are what really sets the Inversion apart from the rest of the Dovo line of lefty scissors. Convex blade faces allows precise ‘slice cuts’, where one points the scissor to the ground and opens the scissor but doesn’t actually move the blades-instead relying upon the blades’ exceptionally thin and sharp cutting edges to trim the hair which points to the ceiling. Just a smooth thrust of throttle with your hand/arm from ceiling to floor at sharp, low angles to the hair allows thinning by carving. The Inversion 244 9505 is supplied with a bottle of lubricant, adjustment screw, and tin box.  Razor Edge, Honed Inner Blade Planes, Convex Blade Profile

Headlamp designed only for NVG type hooks for helmets and tactical helmets equipped with this system. Designed mainly for military and soft air use or for tactical sector operators (police, firefighters etc.)

Powers and durations certified by ANSI / NEMA FL1 standards tested with 1x 18650 3.6V 3400mAh

LED: 1x Cree XM-L2 U2 with 50,000 hour life cycle
Main white light: 5 constant bright outputs, digitally regulated and selectable by pressing the appropriate switch mode button and 3 signals (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (680 h.) -> 38 lumens (25 h.) -> 210 lumens (7.15 h.) -> 420 lumens (2.30 h.) -> 1000 (1h.)
Auxiliary white light: 26 lumens (25h.)
Auxiliary red light: 11 Lumens (20h) -> Caution 11 Lumens (32h)
Range: up to 110mt.
Power peak: 3000 candles
Usable batteries: 1x 18650 3400mAh 3.7V (included in the package) or 2x CR123A 3.0 / 3.7V disposable or rechargeable
Torch dimensions: 82.7x50x46 mm. (with stand included)
Weight: 62.7g (without battery)
Lens: in hardened glass with anti-reflective treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Attachment: support compatible with NVG type helmet attachments
Notes: water resistant as per IP68 standard, submersible at 2mt. depth for 30min.
Included Accessories: 1x 18650 3.7V 3400mAh battery - USB / MicroUSB charging cable - front elastic strap - spare o-ring
Integrated Charging System: through the integrated MicroUSB port - protected by an insulated cover - and using the Micro-USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special bright LED located next to it under the luminous selection buttons. The charging cable can be attached to any PC with a USB port or to any wall power supply or from a cigarette lighter with a USB port.

Type of production: Industrial

Country of production: USA
Blade: 440C stainless steel
Blade treatment: red
Handle: in 440C stainless steel
Blade length: 82mm.
Blade thickness: 4.5mm.
Total length: 184mm.
Weight: 65g.
Sheath: in ABS, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

Cordura tactical backpack, light and durable, designed for hiking, tactical and urban use.

Features and Materials:

- 1000-denier Nylon Cordura resistant to water and abrasion with parts in synthetic velvet
- External treatment for fabrics that ensures resistance to dirt and facilitates maintenance
- Designed for intensive use and hiking, even for several days
- Single 25L front compartment and completely openable and sealed by zip
- Japanese production YKK zip
- Frontal and internal compartments to accommodate documents and small tools
- Padded and ventilated back and shoulder straps
- Reinforced handle and stitching
- Reinforced and long zip pulls, comfortable to use even with gloves
- Large velcro area to anchor patches and various objects
- Compression straps for anchoring objects and compacting the load
- MOLLE compatible front and side parts to expand and modulate the backpack
- Side nylon straps for attaching objects and additional buffets
- Possibility to accommodate water bottles or hydratation pack, with an external hole dedicated to the straw
- Modulable through various expansion compartments that can be purchased separately
- Dimensions: 45x28x16.5 cm.
- Volume: 25 l.
- Weight: 1.46 kg.

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Black TiNi
Handle: Black TiNi and G10 3D stainless steel
Blade length: 8.3mm.
Blade thickness: 2.7mm.
Length closed: 111mm.
Total length: 191mm.
Thick when closed: 9.7mm.
Weight: 131g.
Opening: Carson Flipper and SpeedSafe system
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Kershaw logos
Note: -

Three-in-one functionality, high-quality finish and great ease of use: take Victorinox Wine Master with you and enjoy outdoor adventures with the taste of good life.

The long and sturdy spiral firmly grips the cap, the aluminum size ensures clean and precise cuts and the solid two-stage lever protects from slipping, ensuring a safe removal of the cap. Finally, a knife with an extra high blade, which can make its way into all your favorite picnic snacks, is the final touch that makes Wine Master the perfect multi-purpose tool.

You can see refinement in the ideal action of the fulcrum and in the precision of the details, which minimize the effort required. The cheeks are finished in a selection of precious olive or walnut wood, and combine a comfortable grip and an elegant look.

All of this makes Wine Master an exclusive gift, which immediately fascinates wine lovers and becomes their loyal companion.

Robust multi-purpose knife / sommelier corkscrew manufactured by the Swiss company Victorinox characterized by the olive wood handle.

Technical features:
- 93 mm blade with liner lock
- professional sommelier corkscrew
- paper cutter for wine
- bottle opener / bottle opener
- genuine leather sheath

Accessorio per torce Nitecore

- attacco fucile creato appositamente per i modelli Nitecore
- compatibile anche con modelli di altre marche con fusto di diametro di 1" / 2.54cm

Attraverso questo attacco, è possibile fissare una torcia ad un fucile o a qualsiasi tipo di supporto cilindrico tramite doppio aggancio magnetico.
- Materiali: alluminio aeronautico anodizzato
- Misure: 50mm lunghezza x 65mm altezza
- Diametro utile torcia: da 24mm a 27mm

The new Nitecore NL1826R 18650 battery is a revolutionary battery designed with a built-in micro-USB charging port making charging easier than ever! No more need for an extra charger as this battery can be charged directly using a standard micro-USB charging cable (sold separately). Simply plug the battery into an available power source and a red indicator light under the + pole will turn green upon completion. Alternatively, these batteries can still be charged on an external charger if desired. The NL1826R batteries are designed for powering high drain devices such as high-output flashlights, lanterns, headlamps, and bike lights, as well as a variety of other appliances and devices. With built in smart charging circuitry built and other integrated safety features through-out, this battery will safely work in the majority of button-top compatible devices.

Features & Specifications:
Type: Nitecore NL1826R 18650 3.6V Protected Li-ion rechargeable battery
Capacity: 2600mAh
Voltage: 3.6V
Output: 12.24Wh
USB Charging Voltage: 5V
USB Charging Current: 800mA (Maximum)
Chemistry: Lithium-ion
Weight: 1.52oz (47.3g)
Length: 2.68in (68mm)
Diameter: 0.72in (18.3mm)
Protected: Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V
Recharge: up to 500+ cycles
Red & Green charging indicator LED's
Microporous barrier and pressure release valves help protect the battery and prevent damage caused by rapid expansion & combustion
12 Month Warranty Period

The new Nitecore NL1834R 18650 battery is a revolutionary battery designed with a built-in micro-USB charging port making charging easier than ever! No more need for an extra charger as this battery can be charged directly using a standard micro-USB charging cable (sold separately). Simply plug the battery into an available power source and a red indicator light under the + pole will turn green upon completion. Alternatively, these batteries can still be charged on an external charger if desired. The NL1834R batteries are designed for powering high drain devices such as high-output flashlights, lanterns, headlamps, and bike lights, as well as a variety of other appliances and devices. With built in smart charging circuitry built and other integrated safety features through-out, this battery will safely work in the majority of button-top compatible devices.

Features & Specifications:
Type: Nitecore NL1834R 18650 3.7V Protected Li-ion rechargeable battery
Capacity: 3400mAh
Voltage: 3.7V
Output: 12.24Wh
USB Charging Voltage: 5V
USB Charging Current: 800mA (Maximum)
Chemistry: Lithium-ion
Weight: 1.52oz (47.3g)
Length: 2.68in (68mm)
Diameter: 0.72in (18.3mm)
Protected: Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V
Recharge: up to 500+ cycles
Red & Green charging indicator LED's
Microporous barrier and pressure release valves help protect the battery and prevent damage caused by rapid expansion & combustion
12 Month Warranty Period

Panthera is a new folding that retains all the features of the T-Razor, from which it draws inspiration, with the difference that the dorsal part of the blade goes down towards the tip, like the wharncliff blades. The knife presents the new Razor opening high speed opening system.

Intended use: Sports / Tactical

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal Anodised aluminum
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 165mm.
Total length: 247mm.
Weight: 130g.
Closure: Liner Lock
Clip: absent
Sheath: absent
Note: -

Three-in-one functionality, high-quality finish and great ease of use: take Victorinox Wine Master with you and enjoy outdoor adventures with the taste of good life.

The long and sturdy spiral firmly grips the cap, the aluminum size ensures clean and precise cuts and the solid two-stage lever protects from slipping, ensuring a safe removal of the cap. Finally, a knife with an extra high blade, which can make its way into all your favorite picnic snacks, is the final touch that makes Wine Master the perfect multi-purpose tool.

You can see refinement in the ideal action of the fulcrum and in the precision of the details, which minimize the effort required. The cheeks are finished in a selection of precious olive or walnut wood, and combine a comfortable grip and an elegant look.

All of this makes Wine Master an exclusive gift, which immediately fascinates wine lovers and becomes their loyal companion.

Robust multi-purpose knife / sommelier corkscrew manufactured by the Swiss company Victorinox characterized by the walnut wood handle.

Technical features:
- 93 mm blade with liner lock
- professional sommelier corkscrew
- paper cutter for wine
- bottle opener / bottle opener
- genuine leather sheath

Realizzato utilizzando solo ingredienti 100% naturali e "vegan friendly" con Olio di cocco, mais, essenza di Lime, lanolina ed arricchito con vitamina E, questo dopobarba  rinfrescante ed emoliente per viso, vi idraterà e calmerà le irritazioni.

E' confezionato in un pratico flacone plastico da 60g con tappo a vite in alluminio. Per la massima efficacia scioglierne una minima quantità nel palmo delle mani ed applicarlo su viso e collo con un leggero massaggio.

INGREDIENTI 100% NATURALI

Purpose: sport / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 102g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Pietra sintetica, ad acqua, per affilare. Doppia grana (3000 e 8000),  dotata di supporto in gomma antiscivolo.

Dimensioni:
lunghezza 180 x larghezza 60 x altezza 30 mm - Peso: 456g.

Livello qualitativo: molto buono

Synthetic stone, water, for sharpening. Double grain (2000 and 5000), equipped with non-slip rubber support.

Dimensions:
length 180 x width 60 x height 30 mm - Weight: 490g.

Quality level: very good

Synthetic stone, water, for sharpening. Double grain (600 and 1500), equipped with non-slip rubber support.

Dimensions:
length 180 x width 60 x height 30 mm - Weight: 574g.

Quality level: very good

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 146g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.

It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.

For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.

Purpose: Hunting / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Micarta
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.

Combat version of the Scout model with ultra-slim shape. The 103 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: MIL-C-13924 PVD
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Total length: 217mm.
Weight: 136g.
Sheath: Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Combat version of the Scout model with ultra-slim shape. The 103 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Total length: 217mm.
Weight: 140g.
Sheath: Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

With Shun Nagare, Kai created another innovative Japanese forging masterpiece. This series of fine-knotted knives, thanks to the special features of the materials and the technically complex production process they are made, is located in the extralusso class. Mirrored blades have a damask damask pattern. The dark gray-black handle further enhances the beauty of the knife. The blades of this series are made with two different qualities of steel, bonded to form a 72-layer Damascus steel. The complex machining of the two steel grades produces a blade with exceptionally long lasting cutting performance.

Kai Japan - Shun Nagare NDC-0706 Coreless Steel - Chef knife 200mm.

Blade: Coreless Japanese laminated steel - 72 alternating layers of VG10 and VG2 - hardness 61hrc
Manicure: Pakkawood wood gray / black
Blade length: 200 mm.
Knife thickness: 2.2 mm.
Total length: 340 mm.
Weight: 224 g.
Notes: Not dishwasher safe

With Shun Nagare, Kai created another innovative Japanese forging masterpiece. This series of fine-knotted knives, thanks to the special features of the materials and the technically complex production process they are made, is located in the extralusso class. Mirrored blades have a damask damask pattern. The dark gray-black handle further enhances the beauty of the knife. The blades of this series are made with two different qualities of steel, bonded to form a 72-layer Damascus steel. The complex machining of the two steel grades produces a blade with exceptionally long lasting cutting performance.

Kai Japan - Shun Nagare NDC-0702 Coreless Steel - Santoku knife 180mm.

Blade: Coreless Japanese laminated steel - 72 alternating layers of VG10 and VG2 - hardness 61hrc
Manicure: Pakkawood wood gray / black
Blade length: 180 mm.
Knife thickness: 2.2 mm.
Total length: 315 mm.
Weight: 222 g.
Notes: Not dishwasher safe

With Shun Nagare, Kai created another innovative Japanese forging masterpiece. This series of fine-knotted knives, thanks to the special features of the materials and the technically complex production process they are made, is located in the extralusso class. Mirrored blades have a damask damask pattern. The dark gray-black handle further enhances the beauty of the knife. The blades of this series are made with two different qualities of steel, bonded to form a 72-layer Damascus steel. The complex machining of the two steel grades produces a blade with exceptionally long lasting cutting performance.

Kai Japan - Shun Nagare NDC-0705 Coreless Steel - bread knife 230mm.

Blade: Coreless Japanese laminated steel - 72 alternating layers of VG10 and VG2 - hardness 61hrc
Manicure: Pakkawood wood gray / black
Blade length: 230 mm.
Knife thickness: 2.2 mm.
Total length: 360 mm.
Weight: 220 g.
Notes: Not dishwasher safe

With Shun Nagare, Kai created another innovative Japanese forging masterpiece. This series of fine-knotted knives, thanks to the special features of the materials and the technically complex production process they are made, is located in the extralusso class. Mirrored blades have a damask damask pattern. The dark gray-black handle further enhances the beauty of the knife. The blades of this series are made with two different qualities of steel, bonded to form a 72-layer Damascus steel. The complex machining of the two steel grades produces a blade with exceptionally long lasting cutting performance.

Blade: Coreless Japanese laminated steel - 72 alternating layers of VG10 and VG2 - hardness 61hrc
Manicure: Pakkawood wood gray / black
Blade length: 230 mm.
Blade thickness: 2.5 mm.
Total length: 355 mm.
Weight: 200 g.
Notes: Not dishwasher safe

With Shun Nagare, Kai created another innovative Japanese forging masterpiece. This series of fine-knotted knives, thanks to the special features of the materials and the technically complex production process they are made, is located in the extralusso class. Mirrored blades have a damask damask pattern. The dark gray-black handle further enhances the beauty of the knife. The blades of this series are made with two different qualities of steel, bonded to form a 72-layer Damascus steel. The complex machining of the two steel grades produces a blade with exceptionally long lasting cutting performance.

Kai Japan - Shun Nagare NDC-0701 Coreless Steel - Utility 150mm. - kitchen knives

Blade: Coreless Japanese laminated steel - 72 alternating layers of VG10 and VG2 - hardness 61hrc
Manicure: Pakkawood wood gray / black
Blade length: 90 mm.
Blade thickness: 2 mm.
Total length: 265 mm.
Weight: 106 g.
Notes: Not dishwasher safe

With Shun Nagare, Kai created another innovative Japanese forging masterpiece. This series of fine-knotted knives, thanks to the special features of the materials and the technically complex production process they are made, is located in the extralusso class. Mirrored blades have a damask damask pattern. The dark gray-black handle further enhances the beauty of the knife. The blades of this series are made with two different qualities of steel, bonded to form a 72-layer Damascus steel. The complex machining of the two steel grades produces a blade with exceptionally long lasting cutting performance.

Kai Japan - Shun Nagare NDC-0700 Coreless Steel - Classic 90mm sponge.

Blade: Coreless Japanese laminated steel - 72 alternating layers of VG10 and VG2 - hardness 61hrc
Manicure: Black Pakkawood Wood
Blade length: 90 mm.
Blade thickness: 1.5 mm.
Total length: 200 mm.
Weight: 84 g.
Notes: Not dishwasher safe

Viper's Sakura Knives, designed by Jens Anso and Jesper Voxnaes, are a modern interpretation of the classic kitchen knife.

Featuring a hardening with a subsequent cryogenic finish to provide the best cutting and sealing properties, they have gorgeous Bocote Hot Wood Handles that adds character and sophistication to design.

Recommended uses: Vegetables, raw meat, fish
Country of Origin: Italy - Maniago (PN)
Blade material: Nitro-B 58 / 59HRC stainless steel
Handle material: Bocote stabilized wood
Blade Length: 18cm
Blade thickness: 3mm
Design by Jens Anso & Jesper Voxnaes

Viper's Sakura Knives, designed by Jens Anso and Jesper Voxnaes, are a modern interpretation of the classic kitchen knife.

Featuring a hardening with a subsequent cryogenic finish to provide the best cutting and sealing properties, they have gorgeous Bocote Hot Wood Handles that adds character and sophistication to design.

Recommended uses: Vegetables, raw meat, fish
Country of Origin: Italy - Maniago (PN)
Blade material: Nitro-B 58 / 59HRC stainless steel
Handle material: Bocote stabilized wood
Blade length: 16cm
Blade thickness: 3mm
Design by Jens Anso & Jesper Voxnaes

Type of production: Industrial

Country of production: Italy (Maniago)
Blade: full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Santos Wood
Blade length: 95mm.
Blade thickness: 4mm.
Overall length: 205mm.
Weight: 144g.
Sheath: leather, made in Italy
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Molletta

Intended use: Tactical / EDC

Type of production: Industrial
Country of Origin: USA
Blade: Steel CPM-S30V 58 / 60HRC
Surface treatment: Satin
Handle: Black G10
Blade Length: 8.6mm.
Blade thickness: 3.7mm.
Closed length: 111mm.
Overall length: 193mm.
Closed thickness: 15mm.
Weight: 127g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packing: Cardboard box with Benchmade logos
Notes: -