Anno 2017
-
Viper - Larius by Silvestrelli - Black G10 Stone Washed - V5960GB - knife
Purpose: sport / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 102g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5960GB -
Maserin - Croz - G10 Black - 976/G10N - knife
Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.
It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.
For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.
Purpose: Hunting / Utility
Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Black G10
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.MA-976/G10N -
Maserin - Croz - Micarta Green - 976/MCV - knife
Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.
It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.
For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.
Purpose: Hunting / Utility
Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Micarta
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.M-976/MCV -
ExtremaRatio - Mamba Black - tactical knife
A compact and compact multi-role knife with ABS fast release sheath with two multiposition clips and tight enough to be secured inside the passers-through of the M.O.L.L.E. - Available in four color variants: Black, Desert, Ranger Green and HCS (Hybrid Coyote Sage)
Intended use: tactical / multi role
Type of production: industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade Treatment: MIL-C-13924 PVD
Handle: Forprene
Blade Length: 116mm.
Blade thickness: 4mm.
Total Length: 237mm.
Weight: 85g.
Sheath: in ABS with two multiposition clips, designed for type M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos
Notes: -ER-MAM-BK -
ExtremaRatio - Mamba Ranger Green - tactical knife
A compact and compact multi-role knife with ABS fast release sheath with two multiposition clips and tight enough to be secured inside the passers-through of the M.O.L.L.E. - Available in four color variants: Black, Desert, Ranger Green and HCS (Hybrid Coyote Sage)
Intended use: tactical / multi role
Type of production: industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 116mm.
Blade thickness: 4mm.
Total Length: 237mm.
Weight: 85g.
Sheath: in ABS with two multiposition clips, designed for type M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos
Notes: -ER-MAM-RG -
ExtremaRatio - Mamba HCS - tactical knife
A compact and compact multi-role knife with ABS fast release sheath with two multiposition clips and tight enough to be secured inside the passers-through of the M.O.L.L.E. - Available in four color variants: Black, Desert, Ranger Green and HCS (Hybrid Coyote Sage)
Intended use: tactical / multi role
Type of production: industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 116mm.
Blade thickness: 4mm.
Total Length: 237mm.
Weight: 85g.
Sheath: in ABS with two multiposition clips, designed for type M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos
Notes: -ER-MAM-HC -
ExtremaRatio - Mamba Desert - tactical knife
A compact and compact multi-role knife with ABS fast release sheath with two multiposition clips and tight enough to be secured inside the passers-through of the M.O.L.L.E. - Available in four color variants: Black, Desert, Ranger Green and HCS (Hybrid Coyote Sage)
Intended use: tactical / multi role
Type of production: industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 116mm.
Blade thickness: 4mm.
Total Length: 237mm.
Weight: 85g.
Sheath: in ABS with two multiposition clips, designed for type M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos
Notes: -ER-MAM-DE -
Viper - Storm by Hinderer - G10 Green Stone Washed - V5954GG - Knife
Purpose: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Thickness: 15mm.
Weight: 122g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Remarks: Design by Rick HindererV5954GG -
Viper - Storm by Hinderer - Carbon Fiber Satin - V5954FC - knife
Purpose: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Carbon Fiber and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Closed thickness: 15mm.
Weight: 118g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Rick Hindererer Knives logos
Notes: Design by Rick HindererV5954FC -
Viper - Storm by Hinderer - Black G10 Satin - V5954GB - knife
Purpose: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: G10 and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Thickness: 15mm.
Weight: 122g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Remarks: Design by Rick HindererV5954GB -
Fox - Phoenix knife by Tashi Bharucha - Blue - FX-531TIBL - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Italy
Blade: Stainless steel M390 58 / 60HRC
Surface treatment: Satin finish, and mirror polishing on controfilo
Handle: Titanium Anodized
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: 115mm.
Overall length: 200mm.
Thickness when closed: 13mm
Weight: 148g.
Closure: Framelock
Clip: Titanium Anodized
Packaging: cardboard box with Fox Knives logos
Notes: Design by Tashi Bharucha - Opening with Carson Flipper system - Movement on ball bearingsFX-531TIBL -
Fox - Phoenix by Tashi Bharucha - Brown - FX-531TIBR - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Italy
Blade: Stainless steel M390 58 / 60HRC
Surface treatment: Satin finish, and mirror polishing on controfilo
Handle: Titanium Anodized
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: 115mm.
Overall length: 200mm.
Thickness when closed: 13mm
Weight: 148g.
Closure: Framelock
Clip: Titanium Anodized
Packaging: cardboard box with Fox Knives logos
Notes: Design by Tashi Bharucha - Opening with Carson Flipper system - Movement on ball bearingsFX-531TIBR -
Andre De Villiers ADV - Impi Back Lock Knife Rosewood - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: Satin
Handle: Steel with Rosewood wood inserts
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 164g.
Opening: Nail Nick
Closing: Back Lock
Clip: -
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-IM-RW -
Zero Tolerance - Sinkevich Flipper Blackwash White Carbon Fiber - Sprint Run - ZT0452WBW - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Blackwash
Handle: Blackwash Titanium and White and Black Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: FrameLock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening by Carson Flipper system - Limited edition of Sprint RunZT0452WBW -
Spyderco - Para 3 - Dark Blue CPM-S110V - C223GPDBL - knife
Intended use: Sports
Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S110V Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: sprint run editionC223GPDBL -
Zero Tolerance - Hinderer Slicer Frame Lock - Black Sprint Run - ZT0562BLK - knife
Intended Use: Tactical/Military
Production Type: Industrial
Blade Manufacturing: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade Length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening on KVT Ball Bearing System - Opening by Carson Flipper SystemZT0562BLK -
Ka-Bar - John Ek Commando Knife Model 5 - EK45 - knife
Target: Tactical / Military
Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)KB-EK45 -
Viper - Larius by Silvestrelli - Titanium Satin - V5958TI - knife
Purpose of use: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Titanium with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 146g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5958TI -
Viper - Larius by Silvestrelli - Carbon Fiber Satin - V5958FC - knife
Purpose: sport / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: carbon fiber with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 94g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5958FC -
Ka-Bar - Jarosz Globetrotter Tactical Knife - 7502 - knife
Intended use: Tactical / Utility
Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: Ultramid
Blade Length: 89mm.
Blade thickness: 4.2mm.
Overall length: 192mm.
Balance: backward, 2 cm from the lower guard branch
Weight: 181g.
Sheath: in Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Jesse JaroszKB-7502 -
Lionsteel - M4 - Santos Wood - M4ST - knife
Type of production: Industrial
Country of production: Italy (Maniago)
Blade: full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Santos Wood
Blade length: 95mm.
Blade thickness: 4mm.
Overall length: 205mm.
Weight: 144g.
Sheath: leather, made in Italy
Packaging: Cardboard box with Lion Steel logos
Notes: Design by MollettaLS-M4ST -
Chris Reeve - Professional Soldier by W. Harsey - Tanto - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1002 -
Chris Reeve - Professional Soldier by W. Harsey - Insingo - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1001 -
Chris Reeve - Professional Soldier by W. Harsey - Drop - 2017 Version
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1000 -
Zero Tolerance - Todd Rexford Flipper Folder knife - ZT0801TI - knife
Purpose: Sportsman / Collectibles
Type of production: Industrial
Country of production: U.S.A.
Blade: Stainless steel CPM S35VN 60 / 61HRC
Blade Treatment: Stonewash
Manicure: Titanium
Blade Length: 89mm.
Blade thickness: 4mm.
Closed length: 96mm.
Total length: 119mm.
Closed thickness: 13mm.
Weight: 155g.
Closure: Frame Lock
Clip: Removable, multiposition, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - KVT opening on ball bearingsZT0801TI -
Zero Tolerance - Blackwash Sinkevich Titanium Flipper - ZT0456BW - Knife
Purpose: Sportsman / Collectibles
Type of production: Industrial
Blade Production: U.S.A.
Blade: Stainless steel CPM 20CV
Blade Treatment: Blackwash
Manicure: Titanium with anodized spacers
Blade Length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Overall length: 193mm.
Closed thickness: 14mm.
Weight: 176g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearingsZT0456BW -
Andre De Villiers ADV - Mini Pathfinder Knife LSCF Ti - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: Satin
Handle: Titanium bronze with carbon fiber insert
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 142g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-MP-CF -
Andre De Villiers ADV - Mini Pathfinder Knife 3D Blue Ti - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: Satin
Handle: blue titanium
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 144g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-MP-B -
Guardian Tactical - Conix - G10 Blackwashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Blackwashed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0006 serial number imprinted on the clipGT-81611 -
Guardian Tactical - Conix - G10 Stonewashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0019 serial number imprinted on the clipGT-81511 -
Guardian Tactical - Conix - Carbon Fiber Stonewashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0027 serial number imprinted on the clipGT-82511 -
Guardian Tactical - Conix - Carbon Fiber Two Tone - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Dual Tone - Stone Washed + PVD
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0024 serial number imprinted on the clipGT-82211 -
Bastinelli Knives - Safe Folder Frame Lock - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: Titanium Darkwashed
Blade Length: 100mm.
Blade thickness: 3mm.
Closed length: 125mm.
Overall length: 218mm.
Closed thickness: 14mm.
Weight: 160g.
Opening: carson pinball system
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Rear fender - Produced by Lion SteelBA-SAFE -
Bastinelli Knives - Diagnostic - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04SW -
Bastinelli Knives - Diagnostic Black - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04PVD -
Takeshi Saji - Musashi Tanto 130 - custom Knife
Purpose of use: Collection / Sportsman / Machete
Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade Length: 125mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 245mm.
Closure thickness: -
Balance: -
Weight: 205g.
Closure: -
Clip: -
Sheath: IN LEATHER
Packing: Carton box
Notes: Hand made entirely by Takeshi SajiTS-MT130 -
Stedemon Knife Co. - ZKC C02 Jade Flipper - STEZKCC029 - Knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 88mm.
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 220mm.
Weight: 134g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearingsSTEZKCC029€77.87Out of stock -
Stedemon Knife Co. - ZKC D01 Blue Flipper - STEZKC01SW - Knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total Length: 230mm.
Weight: 142g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearingsSTEZKC01SW€0.00Only -20 leftOut of stock -
We Knife Co. - Dragon Scale Flipper Dual Tone Gray - 604I - knife
Purpose: Sportsman / Collectibles
Type of production: Industrial
Country of production: China
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: dual tone, satin & black PVD
Handle: Titanium 6AL4V machined numerically controlled
Blade Length: 97mm.
Blade thickness: 4mm.
Closed length: 127mm.
Overall length: 224mm.
Weight: 120g.
Closure: Framelock
Clip: titanium 6AL4V
Packing: cardboard box with logos We Knife Co.
Notes: Carson Flipper opening system on ceramic ball bearingsWE-604I -
We Knife Co. - Framelock Flipper Dual Tone Gray - 605E - knife
Purpose: Sportsman / Collectibles
Type of production: Industrial
Country of production: China
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: dual tone, satin & black PVD
Handle: Titanium 6AL4V machined numerically controlled
Blade Length: 89mm.
Blade thickness: 4mm.
Closed length: 101mm.
Total length: 178mm.
Weight: 114g.
Closure: Framelock
Clip: titanium 6AL4V
Packing: cardboard box with logos We Knife Co.
Notes: Carson Flipper opening system on ceramic ball bearingsWE-605E -
We Knife Co. - Framelock Flipper Drop Gray - 608E - knife
Purpose: Sportsman / Collectibles
Type of production: Industrial
Country of production: China
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: black PVD
Handle: Titanium 6AL4V machined numerically controlled
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 127mm.
Overall length: 227mm.
Weight: 150g.
Closure: Framelock
Clip: titanium
Packing: cardboard box with logos We Knife Co.
Notes: Carson Flipper opening system on ceramic ball bearingsWE-608E -
Spartan Blades - Spartan Harsey Folder - Black Logo Limited Edition - SF5S - Knife
Winner of the Blade Show 2016 as "American Made Knife of the Year"
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Purpose: Collection / Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Black PVD
Manicure: Black PVD 6AL-4V titanium
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 225mm.
Weight: 166g.
Closure: FrameLock
Clip: anodized titanium
Packing: Cardboard box with Spartan Blades logos
Notes: Design by William Harsey - Limited edition anodized with engravings
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export
Informazioni su Google TraduttoreCommunityPer cellulariTutto su GooglePrivacy e TerminiGuidaSF5SPARTAN -
Spartan Blades - Spartan Harsey Folder - Bronze Helmet Limited Edition - SF5H - Knife
Winner of the Blade Show 2016 as "American Made Knife of the Year"
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Purpose: Collection / Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Black PVD
Manicure: Anodized 6AL-4V titanium
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 225mm.
Weight: 166g.
Closure: FrameLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Design by William Harsey - Limited edition anodized with engravings
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export
Informazioni su Google TraduttoreCommunityPer cellulariTutto su GooglePrivacy e TerminiGuidaSF5HELMET -
Spartan Blades - Pallas - Tanto Black PVD - SF3BKT - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: PVD
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper systemSF3BKT -
Spartan Blades - Pallas - Drop Black PVD - SF3BK - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: PVD
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper systemSF3BK -
Spartan Blades - Pallas - Tanto Stonewashed - SF3SWT - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper systemSF3SWT -
BlackFox -Tarlo by Alfredo Doricchi - BF-713 - knife
Purpose of use: Light Utility
Type of production: Industrial
Country of production: China
Blade: Stainless Steel 440C
Blade Treatment: Satin
Handle: Paracord
Blade Length: 75mm.
Blade thickness: 4mm.
Total Length: 170mm.
Weight: 80g.
Sheath: in Kydex, with a Tek-Lok attack
Packing: Cardboard box with BlackFox logos
Notes: Design by Alfredo DoricchiBF-713 -
Rick Hinderer Knives - Half Track G10 Green - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Green
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 119g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009SGSOD -
ExtremaRatio - Glauca J1 Jagdkommando - knife
Folding knife developed together with the experts of the Department Jagdkommando materials, the special strength of the Austrian army. It has a tip designed to allow maximum penetration. It is equipped with a rear evacuation hammer, clip applicable in three positions and lateral secure. The handle is made with a particular finish for a better grip during use. The sheath desert kydex with hooking for M.O.L.L.E. system, allows storing the knife blade to open.
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Blade treatment: burnishing MIL-C 13924
Handle: rough anticorodal
Blade length: 110mm.
Blade thickness: 4mm.
Closed Length: 158mm
Overall length: 268mm.
Thickness when closed: 15mm.
Weight: 198g.
Lock: Liner Lock with secure additional
Clip: Removable, stainless steel
Sheath: Kydex, compatible with MOLLE attacks
Packaging: Cardboard box with Extrema Ratio logos
Notes: Rear glass breakerER-GLAJ1 -
Rick Hinderer Knives - Half Track Ti - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 125g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009STSTI -
Rick Hinderer Knives - Half Track G10 Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 119g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009SGSBL -
Rick Hinderer Knives - XM-18 - Bowie 3.5 "G10 Green / Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Green / Black
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 154g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2032SGSGB -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Matte Black - ZT0392BLK - knife
Special Edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made from specially Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, cover-clips are handmade.Use: Collection / Sports
Type of production: Industrial with handmade parts
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: matte black DLC
Handle: Titanium with matte black DLC treatment
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thickness when closed: 14mm.
Weight: 164g.
Lock: Frame Lock
Clip: Removable, Multi position, anodized titanium
Packaging: box with logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by FlipperZT0392BLK -
Zero Tolerance - Sinkevich Flipper - G10 Sprint Run - ZT0452G10 - knife
Intended use: tactical / sports
Type of production: Industrial
Country of production: USA
Blade: M390 stainless steel 59/61HRC
Blade finish: dual tone - stonewashed and satin
Handles: rose bronze titanium and black G10
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: 2017 Sprint Run Edition - Design by Dmitry Sinkevich - Opening on KVT ball-bearing systemZT0452G10 -
Fox - M1 Titanium - Bronze - CED-M1TIBR - knife
Intended use: Sports / Tactical
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Surface treatment: Blackwash
Handle: Titanium bronzed
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 225mm.
Thick when closed: 14.5mm
Weight: 180g.
Closing: Framelock
Clip: Removable, stainless steel
Packaging: cardboard box with Fox Knives logos
Notes: Design by Rob WalkerM1TIBR -
Fox - Tur Fixed Cocobolo by Vox - FX-529CB - Knife
Intended use: Sports
Type of production: Industrial
Production Country: Italy
Blade: full tang stainless steel N690Co
Blade treatment: Satin finish
Handle: Cocobolo
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 220mm.
Balancing: -
Weight: 140g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: design by Jesper VoxnaesFX-529CB -
Fox - Tur Fixed G10 by Vox - FX-529 - Knife
Intended use: Sports
Type of production: Industrial
Production Country: Italy
Blade: full tang stainless steel N690Co
Blade treatment: Satin finish
Handle: G10
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 220mm.
Balancing: -
Weight: 160g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: design by Jesper VoxnaesFX-529 -
Spyderco - Spydiechef Titanium by Marcin Slysz - C211TI - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin SlyszC215G -
Spyderco - Para 3 - G10 Black - C223G - knife
Intended use: Sports
Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C223GP -
Ka-Bar - Dog's Head Utility Knife - 1317 - knife
Intended use: Tactical / Utility
Blade: 1095 carbon steel 56 / 58HRC
Country of Origin: USA
Finish: Teflon coating
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Sheath: LeatherKB-1317 -
Rockstead - Chou HPC Ironwood - Neck Knife - Knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Use: utility / Neck KnifeProduction Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications4069IW -
Jaguar - machete handle with deer - Vintage knife
Year of production: 90 Years
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Stag
Blade length: 370mm.
Blade Thickness: 4mm.
Overall length: 570mm.
Weight: 994g.
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90Ja-fisso€311.48Out of stock -
Pohl Force - Mike Five - Rosewood Santos - 1063 - Knife
Intended use: Sports
Type of production: Industrial
Production Country: Italy
Blade: stainless Niolox
Blade treatment: Satin finish
Handle: Rosewood Wood Santos with stainless steel liners
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Overall length: 220mm.
Thick when closed: 15mm.
Balancing: -
Weight: 185g.
Lock: Back Lock
Clip: Removable and reversiile, stainless steel
Sheath: -
Packaging: Cardboard box with nylon zip bag, lanyard, patches PVC and velcro, guarantee certificates
Notes: Made in Italy by LionSteel of Maniago (PN)PF-1063 -
Zero Tolerance - ZT0055 - Gus T. Cecchini Titanium - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of Origin: USA
Blade: stainless steel S35VN
Blade treatment: Stonewash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 127mm.
Overall length: 222mm.
Thick when closed: -
Weight: 141g.
Closing: Framelock
Clip: Removable, reversible, titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Gustavo T. Cecchini GTC Knives - Opening KVT on ball bearings - Opening system SLT Spring Loaded TabZT0055 -
Zero Tolerance - ZT0850 - Sinkevich and Rexford Carbon Fiber - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-20CV
Blade treatment: stonewashed - satin
Handle: Carbon fiber with aluminum spacers
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 126mm.
Overall length: 221mm.
Thick when closed: -
Weight: 122g.
Closing: Sub Framelock hardened steel
Clip: Removable, titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Sinkevich & RexfordZT0850 -
Zero Tolerance - Sinkevich Flipper Carbon Fiber - Sprint Run - ZT0452CFBLUBLK - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of Origin: USA
Blade: stainless steel M390
Blade treatment: Black DLC
Handle: Titanium blue anodized and Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Closed Length: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - Opening KVT on ball bearings - opening via Carson Flipper systemZT0452BLU -
Zero Tolerance - Hinderer Slicer Frame Lock - Orange Sprint Run - ZT0562ORBLK - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 Orange
Blade length: 90mm.
Blade thickness: 4mm.
Closed Length: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening of ball bearings Ball Bearing System KVT - opening via Carson Flipper systemZT0562ORBLK -
Zero Tolerance - Rexford Folder Titanium Blu-ray Sprint Run - ZT0808BLU - Knife
The Zero Tolerance 0808BLU, with blue-anodized handle, is a sprint run built in a limited quantity.
The 0808 is a collaboration between ZT and custom knifemaker Todd Rexford and is based on his Cesium model. It features advanced-formula stainless steel and ZT’s smooth-as-silk KVT opening system. The 0808’s blade is built of Crucible S35VN stainless steel. This powdered metallurgy steel is extremely fine-grained so it can be sharpened to a razor edge. Added niobium and nitrogen enhance toughness to resist chipping and provide excellent edge retention. Yet it’s also easy to re-sharpen.
Opening is fast and simple with KVT. Caged ball bearings surround the pivot to make the blade quick and easy to open using the built-in flipper. With KVT, the 0808 is as easy to open as any assisted knife, but without the need for a spring.
The 0808GLD’s blade is paired with chamfered titanium handles that provide a solid, comfortable grip. The sturdy frame lock has a hardened steel lockbar insert to offer extra-secure, extra-solid blade lock up. The reversible pocketclip enables you to carry comfortably left- or right-handed.
This blue-anodized edition of the 0808, the 0808BLU, is a sprint run. Quantities are limited. Check with your local ZT dealer for availability.
Rexford Folder Titanium - ZT0808 - knife
Intended use: Sport / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium blu
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rexford - Opening KVT ball-bearing - Sprint Run Limited EditionZT0808BLU -
Spartan Blades - Pallas - Drop Stonewashed - SF3SW - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper systemSF3SW -
Takeshi Saji - Nomurakata Kuma knife - Craft knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: micarta
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: -
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 168g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji10700 -
Takeshi Saji - Koinobori - black carp skin - custom Knife
Takeshi Saji - Koinobori - black carp skin - custom Knife
Intended Use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand Forged, damask laminated with sharp Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closed: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi SajiTS-KOIN -
Takeshi Saji - Koinobori - red carp skin - Craft knife
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, Yoshoku laminated damper with cutting edge in Hitachi Aogami at 64HRC
Blade Treatment: -
Manicure: Koinobori (carp) and Tou-Maki (rattan)
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: -
Overall length: 207mm.
Closure thickness: -
Balance: -
Weight: 128g.
Closure: -
Clip: -
Sheath: in leather
Packing: Carton box
Notes: Hand made entirely by Takeshi SajiTS-KOIR