Anno 2018

Intended use: tactical / military / backup

Blade: stainless steel N690Co 58HRC
Handle: Anticorodal rough 4.5mm thick
Blade length: 95mm.
Blade thickness: 6mm.
Length closed: 127
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: Back Lock
Clip: removable and reversible in stainless steel
Sheath: -

Scissors Thinning mod. Style by Salon Professional 5.5 "

Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.

Each scissor is controlled by our laboratory in order to ensure a perfect cut

Lama: acciaio al carbonio
Impugnatura: cuoio nero e fil di ferro
Pomolo: acciaio al carbonio
Guardia: acciaio al carbonio
Fodero: cuoio nero e acciaio
Lunghezza Lama: 91cm.
Lunghezza Impugnatura: 18.5cm.
Lunghezza Totale: 116cm.
Larghezza Lama: 45mm.
Spessore Lama: 4mm.
Peso: 1520g.
Peso con Fodero: 1830g.
Bilanciamento: avanzato a 13cm.

Edizione limitata 5000 pezzi

- Elmo a grandezza naturale realizzato il metallo e cuoio con ottime finiture e dettagli.

- Supporto in legno d'appoggio e certificato d'autenticità inclusi

Under the command of Gandalf the WhiteTM the men of Gondor defended Minas Tirith, the Kingdom of Gondor, from within the city walls against the siege of Sauron. Greatly outnumbered by Sauron´s armies, the Gondorian infantry did not stand a chance in open war. Miraculously, with the use of their trebuchets and archers, the Gondorian army held their own until the nine Nazgûl, upon their fell beasts, swooped in destroying the trebuchets and forcing men to flee their posts. This distraction allowed the trolls to push their siege towers in, unleashing scores of orcs onto the walls of the city, and allowing the release of Mordor´s greatest weapon - Grond, a 150 foot iron battering ram shaped like a wolf. The gates of the city would not hold, driving the Gondorians back into the third level of the city. 

With much of the lower levels of Gondor in flames, it seemed as if it was on the verge of a catastrophic defeat, until suddenly the Riders of the Rohirrim appeared on the horizon, closing in and driving the armies of Mordor away from the city, thus ending the siege upon Gondor and entering into the Battle of the Pelennor fields. Although the Gondorians were technologically advanced compared to most races of Middle-earth, the design of the helm carries details reminiscent of Numenor. The barbut style helm - one piece, shoulder-length, and open-faced - finished off the suit of steel plate armor that a Gondorian infantryman wore. The smooth finish and flared bottom of the helm offered better neck protection, allowing blows to be deflected away from the body. Adorned on the sides of the helm are seabird wings, a familiar Gondorian motif. 

This authentically detailed helmet is a reproduction of the helmet prominently featured in The Lord of the Rings,TM The Return of the King presented by New Line Cinema. United® Cutlery Brands, industry leader in fine movie reproductions, has meticulously recreated the actual prop helmet using the finest grade materials and craftsmanship of the highest quality available. This intricately detailed actor´s scale helmet is wearable, and is completely handcrafted in solid iron with embossed decoration and a hand-antiqued finish. It features a genuine leather-lined interior with an individually serialized solid brass plate mounted on the inside back of the helmet to ensure authenticity. This adult collectible is strictly limited to 2000 pieces worldwide and each helmet is presented with a wood display stand adorned with "The One Ring" inscription and a brass medallion. 

LIMITED EDITION GONDOR INFANTRY HELM


HELM MATERIAL: Solid iron with embossed decoration and an antiqued finish, genuine leather-lined interior.
DISPLAY: 24.13 cm x 24.77 cm x 17.46 cm wood, burned-edge finish, gold silk screen, brass medallion. Hardware instructions included.

La spada di Boromir tratta dal film “Il Signore degli Anelli”
- Lama in acciaio inox 420 non affilata di cm 76 
- Lunghezza totale cm 105 
- Impugnatura in metallo solido con finitura in pregiato cuoio.

- Certificato di autenticità presente nella confezione
- Supporto in legno

The blade's flattened diamond shape and equally wide fuller reduced weight, yet retained strength in the end of the blade by stopping just short of the tip. It was equally effective for slashing against lightly armored opponents and for thrusting into more heavily protected enemies. The guard, similar to that of his father's sword, showed a warrior's flourish in that it was formed from a square-edged piece of steel that had been twisted before being curved into a crescent. The handgrip was wide like the blade, and the pommel was an elegant and simple piece of steel that added weight to balance the blade.

UC-1400 Sword of Boromir™
Includes a parchment certificate of authenticity.
Overall Length: 39"
Blade Length: 30-3/16"
Blade Thickness: 1/4"
Blade Material: Tempered, 420 J2 stainless steel with a fuller grind, false-edged.
Handle Material: Solid metal guard and pommel, antique metal finish, genuine leatherwrapped grip, tapered tang construction.
Plaque: 12-1/8" x 13-3/8" x 3/4" wood, silkscreened design. Hardware, instructions included.

The blade is cast of forged tool steel and features brass engraved decoration sand a weathered steel finish giving it a battle-worn appearence. Close attention to quality is a priority in every hand-selected piece. Each replica is marked with the appropriate copyrights to ensure authenticity. Includes display plaque and certificate of authenticity.

UC-2628 The Bearded Axe of Gimli™
Includes a parchment certificate of authenticity.
Overall Length: 87
Axe Head Length: 20
Axe Head Material: Forged tool steel, weathered and distressed finish, false-edged.
Plaque: Hardwood plaque. Hardware, instructions included.

Intended use: sports / hiking

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: satin
Handle: Aluminum 6061-T6
Blade length: 94mm.
Blade thickness: 3.2mm.
Length closed: 129mm.
Total length: 226mm.
Weight: 181g.
Closure: AXIS, with assist system
Clip: Deep Carry type, reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: skull crasher / break glass placed on the final part of the handle - additional safety lock to prevent accidental blade opening

3.7V rechargeable IMR battery currently only compatible with Nitecore EC11 and MT10C torches

Rechargeable with Nitecore - Intellicharger i2 EU and Nitecore - Intellicharger i4 EU

Equipped with nickel-plated stainless steel front and rear plates to ensure the best impact resistance, abrasion and corrosion resistance, ensuring maximum electrical conductivity. Suitable for highly energy-consuming electronic devices.

* Rechargeable Battery IMR18350A 3.7V - 700mAh - 7A
* Life cycle: over 500 refills
* Capacity: 700mAh
* Battery size: 18mm in diameter x 34.8mm in length (have a diameter larger than common CR123A / 16340)
* Weight: 20g

WARNING: Positive Flat Plate Battery - This battery has a different diameter than the 16340 / CR123A batteries - Use only in IMR-compatible batteries - Observe the polarity of the batteries when charging and in use - Before to buy and use rechargeable batteries, make sure your device supports them by consulting the manufacturer's manuals.

Pfeil carving knives bag in fabric

4 pieces

- Schaller knife SchG

- Schaller knife SchK

- Canard carving knife CaG

- Canard carving knife CaK

Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife

Intended use: Collection / Sports

Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 2014

Old Bear ™ is the new and exclusive line of pocket knives produced by the maniago company Antonini. This series is characterized by simple and ergonomic shapes, celebrating the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high level of manual skills.

Type of production: semi-handmade
Country of production: Italy
Blade: 420 stainless steel to 54/56 HRC
Handle: in American walnut
Blade length: 95mm.
Blade thickness: 2mm.
Length closed: 120mm.
Thick when closed: 22mm.
Total length: 215mm.
Weight: 91g.
Closing: in brass, with locking both in opening and closing

The sleeves are made of American oleate walnut wood while the blade is made of stainless steel, sharpened and manually picked on the stone by skilled craftsmen hands.

Being a model without a return spring, the blade is fixed to the handle by a solid brass safety ring with a special locking device (patent pending n.1187282 filed again in 1985 by the Todesco company of Maniago, which is active partner of this project) can be activated both in open position and in closed position.

This product was built by subjecting the necessary raw materials to artisanal treatments that make each single knife unique, original and not standardized. Any superficial irregularities represent the confirmation of our manual workings and do not compromise the operational functionality of the tool.

Sturdy, durable and ready for anything, Work Champ XL is the ultimate portable toolbox. Capable of carrying out even 31 functions, it is a true hybrid between a working machine and a champion, and brings tangible results anytime and anywhere. From the multi-purpose pliers to the metal saw and the file, from the wire stripper to the wood saw through the corkscrew, the Phillips screwdriver and the opener, there is no obstacle that the Work Champ XL can not overcome.

Instruments
blade, great
bottle opener
5 mm screwdriver, lockable
stripping
hacksaw for wood
saw for metal
file for metal
stripping
bottle opener
screwdriver 5 mm
can opener
clean clogs
can opener
3 mm screwdriver
size of seat belts
shackle
loose knots
reamer, awl
Phillips screwdriver 0/1, long
scissors
Phillips screwdriver 1 - 2
pliers
nippers
crimp threads
size of seat belts
tweezers
toothpick
key ring
mini screwdriver
corkscrew

One of the most aggressive safety razors on the market now available in a longer and heavier version; particularly suitable for expert hands or rebel beards.

Given its aggressiveness it is advisable to use it every other day in case of daily shaving and to combine soft and soft blades (Eg Personna, Astra etc.)

Materials: Nickel-plated brass head with nickel-plated steel handle
Head Type: Open Tooth Comb
Length: 10.6cm.
Weight: 89g.
Blades: disposable (not included)

Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -

A compact and compact multi-role knife with ABS fast release sheath with two multiposition clips and tight enough to be secured inside the passers-through of the M.O.L.L.E. - Available in four color variants: Black, Desert, Ranger Green and HCS (Hybrid Coyote Sage)

Intended use: tactical / multi role

Type of production: industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 116mm.
Blade thickness: 4mm.
Total Length: 237mm.
Weight: 85g.
Sheath: in ABS with two multiposition clips, designed for type M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos
Notes: -

Designed for intensive use in real-life situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Orange
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thickness when closed: -
Balancing: 1 cm back
Weight: 106g.
Closure: -
Clip: -
Sheath: in kydex
Packaging: cardboard box with WRKT logos
Note:

It is charged as a normal mobile phone!
This torch has already an internal rechargeable battery and equipped with an innovative charging system with the USB / Micro USB

Powers and durations in the laboratory certified by ANSI / NEMA FL1 using 2x 18650 2600mAh 3.7 - in different conditions of use, or using different batteries, the data can vary

LEDs: 1x Cree XM-L U2 with lifespan of 50,000 hours
Operating modes: 6, electronically controlled
Powers and Durations: 860 Lumens (1hr and 45min.) -> 320 Lumens (3h) -> 130 Lumens (8h 30min.) -> 40 Lumens (28h.) -> Strobe -> SOS
Peak Power: 14000 candles
Maximum illumination distance: 236m.
Ignition Method: Button Rear
Selection Method bright: Rotate Head + Rear Button
Head: crown in stainless steel, aluminum head aeronautics
Body: made of aircraft aluminum
Finish: anodized, Type III
Lens: toughened ultra-clear glass with anti-reflective treatment
Batteries: Included a rechargeable battery 18650 3.7V 23000mAh from; may also use 2x CR123A disposable / rechargeable 3.0/3.7V sold separately
Measurements: 16cm (L) - 2.54cm (D stem) - 4.0cm (head D)
Weight: 145g. - Batteries not included
Accessories: Wrist strap, Cordura belt sheath, o-ring seals, Micro-USB charging cable
Waterproofness: how to IPX-8 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands drops from 1.5m in height
Integrated System of Charging: via integrated microUSB port - protected by a cover isolated from o-ring - and using the Micro-USB cable supplied as standard can then recharge the supplied battery, the operation monitored thanks to a special LED light next to the microUSB plug

Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.

Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Satin
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -

Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.

Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Satin
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -

Benchmade original accessory: microfibre bag with printed logo and drawstring closure system ideal for storing and protecting your knives.

Dimensions: 150x60mm
Material: Microfiber
Closure: drawstring, with plastic stopper

Purpose: EDC / Gentleman

Type of production: Industrial
Country of Origin: USA
Blade: Stainless Steel CPM-S30V 58 / 60HRC
Blade treatment: satin finish
Handle: G10
Blade Length: 73mm.
Blade thickness: 2.3mm.
Closed length: 98mm.
Total Length: 170mm.
Closure thickness: 10mm
Balance: -
Weight: 66g.
Closure: SlipJoint
Clip: -
Sheath: -
Packing: Cardboard box with Benchmade logos
Notes: -

In collaboration with Tactical Wander we decided to bring them light utility, the Lynx model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Occupation: Light Utility / All Round

Type of production: Artisan
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: G10
Blade length: 100mm.
Blade thickness: 6.8mm.
Overall length: 220mm.
Balancing: backward
Weight: 360g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with Wander Tactical, we have decided to offer their model TACTICO URO in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.

Use: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: in CoS SanMai steel 61.5 HRC
Lama treatment:
Handle: Micarta
Blade length: 135mm.
Blade thickness: 6.5mm.
Total length: 285mm.
Balancing: set back
Weight: 470g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Cree XP-G2 S3 + 1x LED auxiliary white color CRI> 90 + 1 LED auxiliary red color. All with a life cycle of 50,000 hours
Operating Modes: 4 light powers, selectable with the dedicated dedicated button and 2 signaling modes. 1 Auxiliary white light, 2 red light power and intermittent signaling
Powers and Durate primary white light: 360 Lumens (0.5h.) -> 190 Lumens (5h.) -> 38 Lumens (8h.) -> 1 Lumen (160h.) -> S.O.S. -> Beacon Light
Powers and Durations auxiliary white light: 20 Lumens (6.15h.) - with maximum capacity of 5.5m
Powers and Durations auxiliary red light: 13 Lumens (7.45h.) - with maximum range of 4m -> 0.9 Lumens (68h.) -> Caution (13h.)
Peak of power: 1600 candles
Maximum illumination distance: 81m.
Ignition and selection method luminsa: Power on / off and white lights button + Power on / off button and red light selection
Body: ABS
Batteries: 610mAh Li-Ion, integrated, not removable, equipped with integrated MicroUSB charging system
Measurements: 5.55cm (Lenght) - 3.46cm (Width,) - 2.32cm (Thick)
Weight: 28g. - battery included
Accessories: front elastic band
Waterproof: IP66 standard: resistant to strong splashes of water
Impact resistance: withstands drops from 1.5m in height
Notes: Equipped with integrated charging system via MicroUSB port (cable included in the package); when charging, an integrated LED will show the status and it will switch off automatically when the charging is complete. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The auxiliary white light allows to illuminate at 100 ° amplitude. The inclination adjustment system allows to lower the torch up to 60 °

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Occupation: EDC / Light Utility / All Round

Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Paracord
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: EDC / Light Utility / All Round

Type of production: Artisan
Lama production: Italy
Blade: integral, Japanese rolled stainless steel (San Mai) with 61.5HRC Crystalline-hardened CoS cutting edge
Lama treatment: Raw Satin
Handle: Paracord
Lam length: 90mm.
Blade thickness: 6.8mm.
Total length: 203mm.
Balancing: set back
Weight: 240g.
Sheath: Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Official model with logo - Gruppo Gamma - MAS flotilla

DATA SHEET
Case: 316L stainless steel, ø 42.5mm, black PVD.
Strap: NATO type, customized Xa MAS Flotilla
Crown: screw with embossed logo with double safety o-ring.
Bottom: screw-locked case with embossed logo in relief.
Ring nut: one-way rotating unidirectional with engraved graduated scale.
Water resistance: 20 ATM (200 m).
Movement: Quartz Ronda cal 517 Swiss Made Day Date
Dial: matt black, with indexes, Arabic numerals and fluorescent hands. Daters.
Glass: sapphire 2000 Vickers anti-scratch, with flat anti-reflective coating treatment.

GRUPPO GAMMA
The Gamma Group was a special group of assault swimmers from the Italian Royal Navy, the Royal Army and the MVSN.
Trained in secret at La Spezia, which became the protagonist of various attacks, many of which were successful, allied naval forces during the Second World War, within the Xª MAS Flotilla.
Among the members of this group, the commander Eugenio Wolk, Luigi Ferraro (the man who alone sank most ships in the world in operations to Alexandretta and Mersina), Agostino Straulino, Giorgio Baucer, Egil Khersi, Rodolfo Beuk and many others.

Official model with logo - Navy

Available with the Memphis Belle logo, Folgore, G.I.S., N.O.C.S., Incursori, Arditi Incursori, Navy, X ° Mas or X ° Mas limited edition the Sandy was the watch supplied to the troops in VIETNAM in the period 1960-1975. The military clock since 1815 has become an indispensable tool for the military, especially for seafarers; it was the Great War that made the measurement of time essential. Modern war demanded that all soldiers, sailors and aviators be able to have a good watch at their disposal. The First World War was characterized in fact, for having determined a technological leap forward in communications, transport, flight, the use of new sophisticated weapons and this rapid progress made basic the need for exact synchrony.

The clock, therefore, ceased to be a prerogative of the navigational officer of the naval units, to become an object of which to equip every soldier, professional or leverage, even if in civilian life, he could not have been economically to allow.

The true need arose to create The Sandy, the order clock for US troops and / or allies during the Vietnam War: practical, robust, waterproof, with high visibility at night which was delivered to everyone with the ration k.

The Sandy Watch Caius collection traces the footsteps of the historic military watch supplied to US troops while maintaining the same concepts of practicality: - born nylon strap; - durability: micro-coated, anti-reflective steel case with waterproof screw-down crown; - dial: black, vision deck, with hour markers, numbers, luminova hands with high visibility at night. All features that distinguished the legendary Sandy Watch!

Data sheet

- Case: 316L stainless steel, ø 44mm with black PVD finish.
- Strap: NATO type, made of nylon with a loop and personalized buckle
- Crown: Screw, with double safety o-ring.
- Cashier Fund: Steel screwed with space for custom engraving.
- Water resistance: 10 ATM (100 m). ISO 6425 standard.
- Movement: Automatic mechanical Cal. Nh35 Seiko modified MB with custom rotor in black PVD
- Dial: black with hours and minutes with high visibility at night.
- Glass: Extra strong mineral 700 Vickers curved.

NAVY

The Navy is one of the four armed forces of the Italian Republic, together with the Italian Army, the Air Force and the Carabinieri: it is responsible for the control and conduct of naval operations in territorial and international waters.
Its history began in 1946 after the Second World War with the birth of the Republic, inheriting the structure of the Royal Navy and those naval units that the conditions of the armistice and peace treaty left to Italy. After an expansion also due to the sale by the United States of some naval units and a construction program known as "naval law", necessary to cope with the threat from the Warsaw Pact, from the end of the 20th century century, a downsizing program was implemented due to the revaluation of the tasks of the armed force.
Its mission, initially within NATO and subsequently also of the European Union, consists in maintaining a continuous and credible presence in the Mediterranean area, in the control of Italian seas with aeronaval devices and related land support, in cooperation with the forces Allied naval vessels, in the maintenance of a surface force and an underwater force able to operate autonomously, guaranteeing protection from aerial, surface and underwater offenses, to which an amphibious component able to perform limited operations can be supported.

Official model with logo - FOLGORE

Available with the Memphis Belle logo, Folgore, G.I.S., N.O.C.S., Incursori, Arditi Incursori, Navy, X ° Mas or X ° Mas limited edition the Sandy was the watch supplied to the troops in VIETNAM in the period 1960-1975. The military clock since 1815 has become an indispensable tool for the military, especially for seafarers; it was the Great War that made the measurement of time essential. Modern war demanded that all soldiers, sailors and aviators be able to have a good watch at their disposal. The First World War was characterized in fact, for having determined a technological leap forward in communications, in transport, in flight, in the use of new sophisticated weapons and this rapid progress made basic the need for exact synchrony.

The clock, therefore, ceased to be a prerogative of the navigational officer of the naval units, to become an object of which to equip every soldier, professional or military, even if, in civilian life, he could not have been economically to allow.

The true need arose to create The Sandy, the order clock for US troops and / or allies during the Vietnam War: practical, robust, waterproof, with high visibility at night which was delivered to everyone with the ration k.

The Sandy Watch Caius collection traces the footsteps of the historic military watch supplied to US troops while maintaining the same concepts of practicality: - born nylon strap; - durability: micro-coated, anti-reflective steel case with waterproof screw-down crown; - dial: black, vision deck, with hour markers, numbers, luminova hands with high visibility at night. All features that distinguished the legendary Sandy Watch!

Data sheet

- Case: 316L stainless steel, ø 44mm micro-beaded.
- Strap: NATO type, made of nylon with a loop and personalized buckle
- Crown: Screw, with double safety o-ring.
- Cashier Fund: Steel screwed with space for custom engraving.
- Water resistance: 10 ATM (100 m). ISO 6425 standard.
- Movement: Automatic mechanical Cal. Nh35 Seiko modified MB with custom rotor in black PVD
- Dial: black with hours and minutes with high visibility at night.
- Glass: Extra strong mineral 700 Vickers curved.

BRIGADE PARACADUTISTI "FOLGORE"

The "Folgore" paratroopers' Brigade is the only great airborne unit of the Italian Army, placed under the command of the Terrestrial Operational Forces.

Established on 1 January 1963 in Pisa, for the transformation of the pre-existing Military Center of Parachuting, the Brigade has its headquarters in Livorno and is located with most of its departments in Tuscany (Siena, Pisa, Grosseto, Pistoia) with the 8th Regiment paratroopers in Legnago and with the 185th artillery paratroopers Regiment in Bracciano.

The Sandy was the watch supplied to the troops in VIETNAM in the period 1960-1975. The military clock since 1815 has become an indispensable tool for the military, especially for seafarers; it was the Great War that made the measurement of time essential. Modern war demanded that all soldiers, sailors and aviators be able to have a good watch at their disposal. The First World War was characterized in fact, for having determined a technological leap forward in communications, in transport, in flight, in the use of new sophisticated weapons and this rapid progress made basic the need for exact synchrony.

The clock, therefore, ceased to be a prerogative of the navigational officer of naval units, to become an object of which to equip any soldier, professional or military, even if, in civilian life, he could not have been economically to allow.

The true need arose to create The Sandy, the order clock for US troops and / or allies during the Vietnam War: practical, robust, waterproof, with high visibility at night which was delivered to everyone with the ration k.

The Sandy Watch Caius collection traces the footsteps of the historic military watch supplied to US troops while maintaining the same concepts of practicality: - born nylon strap; - durability: steel case with PVD treatment, anti-reflective, with waterproof screw-down crown; - dial: blue, vision deck, with hour markers, numbers, luminova hands with high visibility at night. All features that distinguished the legendary Sandy Watch!

Data sheet

- Case: 316L steel, ø 44mm, with blue PVD finish
- Strap: Nylon, NATO type, with loop and personalized buckle
- Crown: Screw, with double safety o-ring.
- Cashier bottom: Stainless steel, screw tightened, with Memphis Belle logos
- Water resistance: 10 ATM (100 m). ISO 6425 standard.
- Movement: Cal. 2115 MyotaCo. Ltd DayDate
- Dial: blue with hours and minutes with high visibility at night.
- Glass: mineral, curved type, extra strong with hardness of 700 Vickers
 

BRIGADE PARACADUTISTI "FOLGORE"

The "Folgore" paratroopers' Brigade is the only great airborne unit of the Italian Army, placed under the command of the Terrestrial Operational Forces.

Established on 1 January 1963 in Pisa, for the transformation of the pre-existing Military Center of Parachuting, the Brigade has its headquarters in Livorno and is located with most of its departments in Tuscany (Siena, Pisa, Grosseto, Pistoia) with the 8th Regiment paratroopers in Legnago and with the 185th artillery paratroopers Regiment in Bracciano.

Official model with logo - "Marina Militare"

Sandy was the clock provided to the troops in Vietnam in the period 1960-1975. The military clock since 1815 has become an indispensable tool for the army, especially for seafarers; it was the Great War that made measuring time essential. Modern war has required all soldiers, sailors and aviators to have a good watch at their disposal. World War I was characterized by technological advances in communications, transportation, theft, the use of sophisticated new weapons, and this rapid progress made exact synchronization necessary.

The clock, therefore, has ceased to be an agent naturally prerogative of naval units, to become an object that equips all military, professional or military, even in civil life, it must not be economically able to allow.

The real need was born to create The Sandy, the command of American troops and / or allies during the Vietnam war: practical, robust, waterproof, with great visibility the night that was delivered to everyone with the ration k.

The Sandy Watch Caius collection traces the traces of the historical military watch provided to the American troops, while maintaining the same concepts of practicality: - Nylon strap; - duration: steel case with PVD treatment, anti-reflective, with screwed crown; - dial: blue, vision bridge, with hour markers, numbers, luminova hands with high visibility at night. All the features that distinguish the legendary Sandy Watch!

Data sheet

- Case: 316L stainless steel, ø 44mm, blue PVD finish
- Bracelet: nylon, NATO type, with buckle and personalized buckle
- Crown: screw, with double safety o-ring.
- Cashier Fund: stainless steel, screwed, with Memphis Belle logos
- Water resistance: 10 ATM (100 m). ISO 6425 standard.
- Movement: Cal. 2115 MyotaCo. DayDate Ltd
- Dial: blue with hours and minutes with high visibility at night.
- Glass: mineral, curved, extra strong with a hardness of 700 Vickers

NAVY

The Navy is one of the four armed forces of the Italian Republic, with Italian Army, Aeronautics and Carabineros: it is responsible for the control and performance of naval operations in territorial and international waters.

Its history began in 1946 after the Second World War with the birth of the Republic, inheriting the structure of the Royal Navy and naval units that the conditions of the armistice and peace treaty left in Italy. After an expansion also due to the sale by the United States of some naval units and a construction program known as "Naval Law", necessary to face the threat of the Warsaw Pact, from the end of the 20th century, a program of downsizing was implemented due to the revaluation of the tasks of the armed forces.
Its mission, first in NATO and then in the European Union, is to maintain a continuous and credible presence in the Mediterranean area, in the control of Italian seas with aeronautical vehicles and its ground support, cooperation with allied naval forces , in the maintenance of a surface force and an underwater force able to function autonomously guaranteeing protection from aerial, surface and submarine infractions, which support an amphibious component capable of performing limited operations.