Anno 2019

Intended use: Tactical / Military

Blade: 420HC stainless steel
Lama production: USA
Handle: Zytel
Blade length: 115mm.
Blade thickness: 3.5mm.
Length closed: 142mm.
Total length: 255mm.
Balancing: -
Weight: 172g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 175mm.
Balancing: Set back
Weight: 90g.
Sheath: in Kydex
Packaging: cardboard box with WRKT logos
Note: -

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, D2 steel to 59 / 61HRC
Blade Treatment: Black Blood
Manicure: paracord woodland
Blade Length: 90mm.
Blade thickness: 6.5mm.
Total length: 200mm.
Balance: backward
Weight: 220g.
Sheath: in Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed product

Led: 1x Cree XHP35 HD - with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes all electronically regulated
Powers and Durations: 1800 Lumens (0.5h) -> 950 Lumens (2.15h) -> 240 Lumens (5.45h) -> 70 Lumens (19h) -> 1 Lumens (250h.) -> Strobo -> Beacon -> S.O.S.
Power peak: 23100 candles
Maximum illumination distance: 304m.
Ignition method: Rear button with "Momentary On" system for luminous signals
Light selection method: Front button located under the head
Head: aeronautical aluminum
Body: aeronautical aluminum
Finishing: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective coating
Battery: included in the package, 1x Li-ion 18650 rechargeable from 3.7V, 8A, 3500mAh - If necessary can also work with 1x 18650 Li-Ion 3.7V or 2x CR123 3.0V without being able to reach 1800 lumens of power
Measurements: 15cm (L) - 2.54cm (D stem) - 3.4cm (D head) - 2.60cm (D shank)
Weight: 124g. without the battery inserted
Accessories: wrist strap, belt cordura sheath, spare o-ring, clip, removable tactical ring, USB / Micro-USB charging cable, NL1835HP battery
Waterproofing: as per IP68 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1m in height
Italian Nitecore Italia Warranty: 5 year guaranteed torch - 12 month guaranteed battery

Powers and durations certified in laboratory by ANSI / NEMA FL1 standard using 1x Li-ion18650 3.7V 3500mAh - in different conditions of use or using different batteries, data may vary

Type of production: Industrial
Country of production: China
Blade: stainless steel 2Cr13
Blade treatment: Black Oxide Coating
Handle: Nylon and Glass Fiber
Blade length: 98.5mm. (only sharp) 197mm (with hammer)
Blade thickness: 10mm. In the central point
Total length: 393mm
Weight: 860g.
Sheath: TPR blade cover (thermoplastic rubber)
Packaging: cardboard box with United Cutlery logos
Note: -

IMPORTANTE: questa batteria non è una comune batteria formata da 2xCR12A da 3V e non può essere utilizzata in apparecchi che utilizzano batterie CR123A poichè ha un diametro differente. Richiede inoltre un apposito caricabatterie per essere ricaricata e non possono essere utilizzati normali caricabatterie per batterie di tipo Ni-Mh o Li-Ion. Non ci riteniamo responsabili in caso di utilizzo errato delle batterie, di uso a polarità invertite, di errori in fase di ricarica o di eventuali danni su apparecchiature non idonee al funzionamento con queste batterie.

CARATTERISTICHE BATTERIA

* Batteria ricaricabile Li-Ion 18650 cilindrica
* Voltaggio nominale: 3.6V
* Capacità: 3500mAh - 8A
* Polo Positivo: Sporgente
* Circuito di protezione PCB per la protezione interna del voltaggio
* La protezione PCB previene i sottovoltaggi a 2.5V e i sovravoltaggi a 4.25V
PRECAUZIONI BATTERIA

* Non lasciare incustodite le batterie durante la fase di carica * Non ricaricare sopra tappeti, tavoli in legno o materiali infiammabili
* Non siamo responsabili per danni derivati dalla manomissione delle batterie
* Non siamo responsabili per un uso incorretto o con polarità invertite delle batterie

SPECIFICHE TECNICHE BATTERIA:

* Capacità: 3500mAh nominali
* Dimensioni: 18+/-0.2 mm diametro x 66+/- 0.2mm altezza
* Peso approssimativo: 47g
* Voltaggio nominale medio: 3.6V
* Voltaggio di picco: 4.2V
* Potenza: 8A
* Cicli vitali: > oltre i 500 cicli

IDEALE PER I SEGUENTI MODELLI NITECORE:
CONCEPT 1 - EC23 - HC33 - MH12GTS - MH23 - MH25GTS

La prima Nitecore con ricarica ad induzione magnetica o tramite cavo Micro-USB - Viene fornita con una base di appoggio di ricarica, con un supporto da muro  di ricarica, con un cavo USB e con una presa da auto per accendisigari

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1 utilizzando 2x CR123A 3.0V 1700mAh - in differenti condizioni di uso o utilizzando differenti batterie, i dati possono variare

Led: 1x Cree XP-L HI V3 - con un ciclo vitale di 50.000 ore
Modi Operativi: 5, regolati elettronicamente
Potenze e Durate: 800 Lumens (60min.) -> 230 Lumens (9h) -> 120 Lumens (12h) -> 50 Lumens (15h) -> Strobo
Picco di potenza: 25800 candele
Distanza di illuminazione massima: 321m.
Metodo di accensione: Pulsante Posteriore con sistema "Momentary On" per segnalazioni luminose e Pulsante Posteriore "Mode" per accedere immediatamente alla funzione strobo, che rimane attiva fino a quando il pulsante rimane premuto
Metodo di selezione luminosa: Con la torcia accesa, premendo il pulsante posteriore "Mode"
Testa: alluminio aeronautico
Corpo: alluminio aeronautico
Finitura: anodizzata, Type III
Lente: vetro indurito ultra trasparente con trattamento antiriflesso
Batterie: funziona con una batteria ricaricabile 18650 3.7V o 2x batterie CR123A usa e getta/ricaricabili da 3.0/3.7V (vendute separatamente)
Misure: 14.1cm (L) - 2.54cm (D fusto) - 3.18cm (D testa)
Peso: 86g. batterie escluse
Accessori: lacciolo da polso, fodero in cordura da cintura, o-ring di ricambio, clip, pulsante posteriore in gomma di ricambio, contenitore per batterie CR123A
Impermeabilità: come da standard IPX-8, immergibile fino a 2mt. di profondità per 30min.
Resistenza agli impatti: resiste a cadute da 1.5m di altezza

rivsalt PEPPER is the perfect companion to our range of salts products. each PEPPER-set contains several aromatic long peppers from the indonesian island of java. together with the high-quality stainless steel grater and natural oak desk stand they truly become yet another conversation piece at the dining table. the java long peppers have their own distinctive character, as well as the familiar black pepper taste. grated over your dish, you’ll detect surprising aromas of liquorice, aniseed and cinnamon, with a spicy sensation towards the end. think of it as a regular black pepper with a twist. grater 10 cm (height) x 2,5 cm (width) x 0,1 cm (thickness) note: your rivsalt PEPPER grater is comparable to a quality chef’s knife. to keep it sharp, shiny and rust free wash you grater by hand regularly using a mild dishwashing liquid and water. use a brush to remove loose pepper or salt. after washing, rinse with water and dry thoroughly with a towel. the grater should not be put in the dishwasher. doing so could damage the sharp edges. please be aware that during hot weather and high humidity it is necessary to care a little extra for your rivsalt PEPPER grater and clean your grater more regularly. desk stand 4,3 cm (diameter) x 1,9 cm (thickness) manufactured out of FSC-certified oak wood. java long peppers irregular dimension, and vary between 2-4cm ~15g inside packaging cardboard gift tube 4,5 cm (diameter) x 13,5 cm (height) total weight ~100 g

Intended use: Tactical / Sports
Blade: stainless steel 154CM 58/61 HRC
Country of production: USA
Handle: FRN
Blade length: 88mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 205mm.
Weight: 107g.
Closure: Axis Lock
Clip: removable and reversible in stainless steel
Sheath: -
Packaging: cardboard box with Benchmade logos
Notes: Design by Mel Pardue

Intended use: Tactical

Type of production: Industrial
Lama production: USA
Blade: steel D2 60 / 62HRC
Lama treatment: TiNi
Handle: Black G10
Blade length: 106mm.
Blade thickness: 4mm.
Total length: 229mm.
Balancing: -
Weight: 158g.
Sheath: Nylon, compatible MOLLE
Packaging: Cardboard box with Benchmade logos
Note: -

A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.

Destination of use: collection

Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative edition

First folder presented by Wander Tactical

Type of production: semi-industrial
Country of production: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pin

Destination of use: Sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13MoV 55/57 HRC
Blade treatment: Satin
Handle: Aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 205mm.
Weight: 98g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Note: Opening on ball bearings with IKBS system - Opening by Carson Flipper system - Design by Ken Onion

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: satin
Grip: black G10 grips
Blade length: 130mm.
Total length: 260mm.
Blade thickness: 5mm.
Weight: 230g.
Sheath: black Cordura sheath with strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola

Destination of use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Satin
Handle: Carbon Fiber
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 106mm.
Total length: 184mm.
Weight: 82g.
Locking system: Compression Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: opening by Carson Flipper system on ball bearings

Intended use: Sports / Tactical

Type of production: Industrial
Lama production: China
Blade: 8Cr14MoV stainless steel
Blade Treatment: Black Stone Washed
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 202mm.
Weight: 116g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: "Outburtst" rapid opening system

Knife without spring with a very characteristic line, representative of the rural and pastoral culture of the valleys of Bergamo where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is reproposed by Consigli in a refined version, a model with a horn tip and a polished brass band.

Blade: 420 stainless steel
Handle: bovine horn
Blade length: 90mm.
Total length: 200mm.

ATTENTION: since it is a natural material, the coloring of the horn may be different from that in the picture.

Three Pianelle R-TPC20 - knife

Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.

Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle

Knickerbockers with Meridiana R-ZVC24M - knife

The version of Zuava with sundial, a special door engraving on the blade of an ancient sundial design, functional. The firm is made of brass.

Blade: 420 stainless steel
Handle: horn cattle
Blade length: 105mm.
Overall length: 240mm.

Rasolino in bovine RAC-20 - Knife

The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
  The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.

Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.

The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

Destination of use: tactical

Blade: stainless steel AUS 8A
Handle: titanium
Blade length: 88mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 215mm.
balancing:
Weight: 124g.
Closing: frame lock
Opening: pinball
Clip: in steel
Design: by Jesse Jarosz
Production: Taiwan

Rescue knife made by Wander Tactical in collaboration with Collini Cutlery and SICS, Italian Rescue Squad.

Use: Rescue / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Iron Wash
Handle: about 4 meters of Paracord
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 124g.
Sheath: in Kydex, thermoformed
Package: -
Notes: Each knife is unique with certificate, numbered and with official logos SICS Italian Squad Rescue Dogs

Rescue knife made by Wander Tactical in collaboration with Collini Cutlery and SICS, Italian Rescue Squad.

Use: Rescue / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Iron Wash
Handle: about 4 meters of Paracord
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 124g.
Sheath: in Kydex, thermoformed
Package: -
Notes: Each knife is unique with certificate, numbered and with official logos SICS Italian Squad Rescue Dogs

In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with its well-kept ergonomics, has an anodized titanium structure, enclosed in thin carbon fiber folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 78g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Sturdy bowie knife with clip point blade made of steel with a high carbon content.

Employment: Sports / Collection

Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56 - PTFE Treatment
Manicure: laminated wood
Blade Length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Closed thickness: 22mm.
Total length: 190mm.
Weight: 36g.
Closure: viro block

"Old Bear ™" (*) is a new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of Antonini (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

When it comes to all around functionality, you can't beat the Griptillian®. There are more shapes, sizes and colors available in the Griptillian than any other product family from Benchmade. Made in USA.

Designer: Pardue
Mechanism: AXIS®
Action: Manual-opening
Blade Steel: 154CM (58-61 HRC)
Blade Length: 3.45" (8.76cm)
Blade Thickness: 0.115" (2.92mm)
Open Length: 8.07" (20.50cm)
Closed Length: 4.62" (11.73cm)
Handle Thickness: 0.64" (16.26mm)
Weight: 3.88oz. (110.00g)

Charming knife used by the Japanese farmer.
As is typical of many agricultural implements, this Japanese knife is extremely simple but is the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.

The main characteristic is certainly the quality of the blade, in fact it uses a San Mai steel with three layers of which the one in the middle is very hard.

It has a razor wire, as is appropriate for a tool designed to cut and not just to be exposed in display cases.

Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: brass sheet
Closure: without blade block
Length closed: 100mm.
Blade length: 73mm.
Blade thickness: 3.0mm
Length open: 172mm
Weight: 48g.
Notes: Engravings on both sides of the handle, lubricate well the blade otherwise easily subjected to oxidation.

IL PRODOTTO
Uso: Teglia da forno o da gas (no induzione)
Materiali: Alluminio
Rivestimento: Antiaderente in titanio e ceramica, privo di PFOA
Misure: 39x27 cm.
Capacità: 5l.
Note: Adatto a tutte le fonti di calore, esclusa l'induzione.

L'AZIENDA
Azienda Danese attiva dal 1956 con profonde radici nella tradizione artigianale, ScanPan crea pentole, padelle, teglie, casseruole ed accessori per la casa. Tutti strumenti funzionali e senza tempo per cucine moderne.

Dal lancio di ScanPan, i prodotti in alluminio con rivestimento brevettato titanio ceramica hanno costituito il cuore del business. Oggi, realizza ancora tutti i prodotti in alluminio antiaderente presso lo stabilimento interno di Ryomgård

MATERIALI E COSTRUZIONE
- 100% alluminio riciclato (forgiato da liquido)
- La temperatura di fusione dell‘alluminio è 600 °C.
- La robusta base è forgiata con una pressione di 200 tonnellate per eliminare qualsiasi difetto.
- La base perfettamente piatta ha uno spessore (5,5 - 7,5 mm) pensato per una rapida distribuzione del calore e una ritenzione termica ottimale, per ridurre al minimo il consumo di energia.
- Fondo piatto garantito per tutta la vita del prodotto.
- Si procede quindi alla smerigliatura per pulire la superficie e ottenere una certa levigatura per l‘applicazione dello strato in titanio ceramico.
- Durante la smerigliatura, ogni singolo prodotto è sottoposto a una verifica integrale per individuare eventuali problemi di forgiatura.
- Le pentole e i tegami SCANPAN utilizzano un rivestimento antiaderente di ultima generazione.
- Il rivestimento è completamente privo di PFOA in TUTTE le fasi di produzione.
- SCANPAN è stata la prima azienda a sviluppare un AUTENTICO rivestimento antiaderente privo di PFOA.
- Il rivestimento antiaderente consente una cottura senza grassi, evitando che i cibi aderiscano al tegame.
- Il rivestimento antiaderente SCANPAN con titanio ceramico brevettato è il risultato di una tecnologia esclusiva, che garantisce l‘uso sicuro di utensili in metallo.
- Un ingrandimento di una sezione trasversale mostra una struttura simile a una catena montuosa, con il rivestimento antiaderente accuratamente protetto dagli altri strati.
- In questo modo, il rivestimento antiaderente resta integro e assicura un risultato perfetto.

Type of production: Artisan
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Handle: Micarta
Blade length: 225mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: set back
Weight: 686g.
Sheath: in leather
Package: -
Notes: GodFather model with bowie