Anno 2019
-
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Boker Plus - Epicenter - D2 Back Lock by Todd Rexford - 01BO545 - knife
With the Boker Plus Epicenter Backlock, U.S. designer Todd Rexford has created a knife of impressive proportions that combines the irrepressible forces of nature and unleashes an uncontrollable tremor in the center of knife enthusiasts' emotions.
With the yellow and black color combination of the all-G10 shaped handle, the Epicenter ranks right at the top of the Richter scale. Only the sturdy backlock can tame the elemental force this pocket knife can generate, securely locking the blade in place.
The brass lanyard hole and the ring on the blade axis screw add to the appeal of this natural phenomenon and inevitably make your hands shake.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3.7mm.
Length when closed: 120mm.
Total length: 210mm.
Weight: 130g.
Clip: stainless steel, removable
Closure: Back Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Todd RexfordBO-01BO545 -
Ka-Bar - Dozier Folding Hunter knife 4062D2 - Coyote Blue Zytel Handle - knife
Intended use: tactical
Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4062D2 -
Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -C28GYW2 -
Cold Steel - Bush Ranger Lite Knife - Green GFN - 21A - knife
Intended use: sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Satin
Handle: GFN (Glass Filled Nylon)
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 147g.
Closing: Tri-Ad Lock with additional safety catch on the left handle
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Cold Steel logos
Notes: Design by Mike WallaceCS21A -
Boker Plus - Kerberos by Sam Lurquin - 01BO266 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in carbon steel D2
Blade treatment: satin finish
Handle: G10
Blade length: 81mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 140g.
Clip: -
Closure: back lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Sam LurquinBO-01BO266 -
Al-Mar - Hawk - Iron Wood 1002 Full Set - PRIVATE COLLECTION - Vintage knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition, close to new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Some small hairline on heads and metal insert
* Box: Present - Original
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: - - Original
* Checked and certified by our in-house laboratory
Intended Use: Gentleman / Collection
Production type: Industrial
Country of manufacture: Seki - Japan
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: iron wood, nickel silver insert, stainless steel heads and brass folders
Blade length: 64mm.
Blade thickness: 2mm.
Length closed: 85mm.
Total length: 147mm.
Weight: 53g.
Closure: Back Lock
Sheath: Nylon, with belt loop and Velcro closure
Packaging: Cardboard box with Al Mar logos
Notes: Previously purchased - Near mint condition - Full SetAM-1002CP -
Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife
Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left headAM-3002DOL -
CRKT - Provoke EDC Knife - 4050 - knife
The Provoke® EDC takes the powerful Kinematic™ technology of the original Provoke® karambit and applies it to a "standard" folding knife that is flexible in more ways than one. For all those who wanted the Kinematic™ opening but didn't need a karambit, you can now use the same innovative technology in a knife designed for everyday use. The Provoke® EDC features a new flat edge blade made of D2 steel (providing excellent edge retention) and a lightweight aluminum handle that allows it to fit comfortably in your pocket.
Unique innovation: thanks to the Kinematic® system, the blade opens with thumb pressure.
Superior performance: D2 steel for excellent edge retention
Strong and lightweight: Aluminum handle combines strength and minimal weight
Unique function: Wire-mounted clip for safe carrying
Intended Use: EDC / Collection
Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 65mm.
Blade thickness: 3.3mm.
Length closed: 107mm.
Total length: 182mm.
Weight: 98g.
Closure: Side Lever (modified back lock)
Clip: stainless steel, retractable
Packaging: cardboard box with CRKT logos
Notes: Design by Joe CaswellC4050 -
Spyderco - Police knife Steel C07P - VG10 steel - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Rare model of the Police 2 - years 2002 - 2006
* Condition: in like new condition
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / CollectionType of production: Industrial
Production Lama: Japan
Blade: In VG10 stainless steel
Blade treatment: -
Handle: steel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balancing: -
Weight: 158g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: without box
Note:SP-POL-07P -
ExtremaRatio - Lamborghini Reventón knife - Limited Edition - PRIVATE COLLECTION - knife
Reventon knife, no longer in production for years and limited to 2000 pieces, withdrawn from a private collection globally in excellent condition - Complete with everything, plastic box and certificates. Checked and certified by our internal laboratory.
Extrema Ratio was chosen by Automobili Lamborghini to produce the Reventón Folder, an emergency knife, belt cutter and glass breaker, designed by the Lamborghini Style Center, which becomes the official equipment of each of the 20 Reventón produced, the most exclusive supercar of the House of Bull.
The "Reventón Folder" is an accessory of the highest functional and aesthetic level, clearly in line with the philosophy of the car built with concepts and technologies directly borrowed from the most advanced aviation industry.
The knife is produced in a limited edition of 2,000 pieces, the first twenty equip the Reventón, the other 1980 pieces will be available for collectors.
Intended use: Collection
Type of production: Industrial
Production Lama: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Testudo
Handle: Anticorodal
Blade length: 120mm.
Blade thickness: 6.3mm.
Closed length: 155mm.
Total length: 260mm.
Thick when closed: 21mm.
Balancing: -
Weight: 235g.
Closure: Back Lock with safety catch
Clip: -
Sheath: -
Packaging: plastic box with Lamborghini and Reventon logos
Notes: Specimen number 297 out of 2000, unique piece at our disposalAP-REV-ER -
CRKT - Provoke Compact - Kinematic Morphing Karambit - 4045 - knife
Intended Use: Tactical / Collection
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Aluminum 6061-T6
Blade Length: 57mm.
Blade thickness: 3.7mm.
Length closed: 115mm.
Total length: 168mm.
Weight: 124g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe CaswellC4045 -
Spyderco - Co-Pilot C09S knife - GIN-1 steel - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model and out of production for many years, dating back to 1995 with blade made of Japanese GIN-1 steel - Overall in excellent condition. Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: Japan
Blade: Gin-1 stainless steel
Blade treatment: -
Handle: steel
Blade length: 50mm.
Blade thickness: 2.5mm.
Closed length: 77mm.
Total length: 126mm.
Thick when closed: 6mm
Balancing: -
Weight: 71g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: cardboard box
Note:SP-C09S-AP -
CRKT - Provoke Zap - Kinematic Morphing Karambit - 4041G - Knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Blackwashed
Handle: Grivory
Blade length: 63mm.
Blade thickness: 5.4mm.
Length closed: 126mm.
Total length: 182mm.
Weight: 133g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe CaswellCR4041G -
CRKT - Provoke Orange - Kinematic Morphing Karambit - 4041O - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Blackwashed
Handle: Grivory
Blade length: 63mm.
Blade thickness: 5.4mm.
Length closed: 126mm.
Total length: 182mm.
Weight: 133g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe CaswellCR4041O -
Jaguar - Set knives - 3 pieces vintage 90s knives
Year of production: 1990s
Type of production: industrial
Blade: 440A stainless steel
Country of production: Italy - Maniago
Handle: Rosewood - buffalo horn - deer - with mirror polished brass heads
Blade length: 69mm.
Blade thickness: 2.5mm.
Length closed: 82mm.
Total length: 146mm.
Weight: 70g.
Closure: Back Lock
Sheath:
Note: Jaguar is the trade name under which Maserin produced knives until the 90sJA-SET-3€110.66Out of stock -
Kershaw - Outlaw Bill 1065 Made in Japan - Vintage Knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Japan
Blade: stainless steel Aus-8
Blade treatment: Satin finish
Handle: Kraton
Blade length: 97mm.
Blade thickness: 3.4mm.
Length closed: 123mm.
Total length: 223mm.
Thick when closed: 22.5mm.
Weight: 140g.
Opening: two-handed, by grooving on a blade
Closure: Back Lock
Clip: -
Sheath: nylon, belt, with kershaw logo
Packaging: Cardboard box with Kershaw logos
Notes: knife in production until the 90sK1065 -
Kershaw - Elk Spring 1046 Made in Japan - Vintage Knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Japan
Blade: stainless steel Aus-8
Blade treatment: Satin finish
Handle: Kraton
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 182mm.
Thick when closed: 17.3mm.
Weight: 84g.
Opening: by grooving on a blade
Closure: Back Lock
Clip: -
Sheath: nylon, belt, with kershaw logo
Packaging: Cardboard box with Kershaw logos
Notes: knife in production until the 90sK1046 -
CRKT - Provoke - Kinematic Morphing Karambit - 4040 - Knife
Intended use: Tactical / Collection
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Black Titanium Nitride
Handle: 6061-T6 Black Titanium Nitride Aluminum
Blade length: 61mm.
Blade thickness: 5.2mm.
Length closed: 125mm.
Total length: 180mm.
Weight: 173g.
Closing: Side Lever (modified back lock)
Clip: in stainless steel, retractable
Packaging: cardboard box with CRKT logos
Notes: Design by Joe CaswellC4040 -
Spyderco - Dragonfly 2 Salt Yellow Hawkbill - C28YL2HB - Knife
Intended use: sub / immersion / sports
Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosionC28YL2HB -
Le Berger - Vendetta Corsa in sheepskin with blade lock - knife collection
Traditional knife Course handcrafted by the historic French company Le Berger
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: sheepskin
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 205mm.
Balancing: -
Weight: 120g.
Sheath: in leather
Packaging: -
Note: -corso€131.15Out of stock -
Conaz Consigli Scarperia - 24cm ox horn Zuava with blade lock - 50079 - folding knife, made in Italy
Intended use: collection
Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch
Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.
Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.50079 -
Gilles - Laguiole ram's horn with handmade damascus - knife
These high quality knives are handcrafted according to the tradition of the French cutlery of Thiers which ensures the absence of any manufacturing defect in the context of normal use.
Country of production: France
Blade: hand forged stainless damascus steel
Handle: ram's horn
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 122g.
Locking system: Back Lock
Sheath: brown leather, with belt loop, handmade
Note: each knife is accompanied by a certificate of guarantee with serial number - wooden gift box with Gilles logos2883€401.64Only -50 leftOut of stock