Anno 2019

This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.

Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.

Sword characteristics:

- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch

aikuchi

processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.

The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.

Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -

Faithful reproduction of the Roman sword produced by Windlass

Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment

Reproduction of an Italian dagger of the 14th / 15th century.

The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.

Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.

Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.

Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.

The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.

Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.

La Valyrian Steel Collection è una serie di riproduzioni con licenze ufficiali, di armi presenti nell'universo fantasy creato dai libri best-seller di George R.R. Martin. Ogni singolo prodotto è realizzato con i migliori materiali disponibili e con particolare attenzione alle finiture ed ai dettagli.

Needle - La spada di Arya Stark

Lama: non affilata, in acciaio inox 420J2, lunga 57cm.
Guardia e Pomolo: Metallo color ottone antichizzato
Impugnatura: Pelle
Supporto Espositivo: da muro, in legno
Lunghezza Totale: 77.5cm.

Arya Stark
Arya Stark nacque nel duecentottantanovesimo anno dopo la conquista del Continente Occidentale da parte di Aegon Targaryen; è la seconda figlia femmina di Eddard Stark e Catelyn Tully.

È descritta come una bambina magra ed atletica. Ha ereditato la fisicità degli Stark, avendo un viso allungato, gli occhi grigi e i capelli castani. La sua personalità ricorda inoltre quella della defunta zia paterna, Lyanna.

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

Type of production: Artisan
Country of production: Cambodia
Blade: in DNH7 carbon steel hand-forged with clay-selective hardening with 60 / 40HRC tempering
Habaki: in bronze
Tsuka: Magnolia wood and water buffalo horn, removable
Saya: Magnolia wood and water buffalo horn
Blade length: 175mm. (including habaki)
Total length: 278mm. (295mm. With scabbard)
Weight: 224g. without scabbard (306g. with scabbard)

Note: Since these are handmade knives and differ slightly in finishes from one another, the product you ordered may not be identical to the one represented in the images but may have minor color differences.

These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.

Small technical glossary: ​​Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade

Faithful reproduction produced by Windlass, of the sword taken from the movie "The Gladiator", epic film of 2000, directed by Ridley Scott and starring Russell Crowe.

Exhibition product

Blade: Carbon steel
Handle: in synthetic material, wood and bronze
Blade length: 75cm.
Total Length: 97cm.
Blade thickness: 3mm.
Balancing: advanced, at 3cm. from the guard branch
Sheath: in wood and leather with brass fittings
Weight: 1450g.