Anno 2020

Equipped with 4 CREE XP-G3 LEDs with a lifespan of 50,000 hours, the NPL30 has an output of 1200 lumens, a peak intensity of 3,300 cd and a shooting depth of 113 meters. It is powered by 2 CR123A batteries (included) with a maximum autonomy of 1 hour and 45 minutes. Both switches can perform the same functions to provide ambidextrous light activation. Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and triple press one of the power buttons for STROBE mode, which uses randomly changing frequencies for stronger dizzying effects.

There is the standard Picatinny rail mount for quick mounting and compatible with firearms with universal Picatinny rails. Electronic reverse polarity protection ensures safe and stable use. Built-in ATR technology adjusts the NPL30's output based on working conditions and environment to maintain optimum performance. It has an ultralight weight of 130g (4.59oz) (including battery), IP66 waterproof and 1m impact resistant.

Led: 4x Cree XP-G3 - with a life cycle of 50,000 hours
Operating Modes: Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and press one of the power buttons three times for the STROBE mode, which uses frequencies that change randomly for stronger dizzying effects.
Powers and Durations: 1200 lumens (1.45h) Strobo 1200 lumes
Power peak: 3300 cd
Maximum illumination distance: 113m.
Ignition method: double switch, ambidextrous, placed on the sides of the flashlight
Light variation method: double switch, ambidextrous, placed on the sides of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: works with two CR123A batteries (included in the package)
Measurements: 8.1cm (Length) - 3.8cm (Width) - 3.5cm (thickness, sled included)
Weight: 130g. with battery inserted
Accessories: o-rings
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m. in height
Notes: Universal quick coupling slide, compatible with Picatinny and Weaver systems

WHY CHOOSE:
Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Light with strong spot - Integrated UV light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:
- Uses a Luminus SST-40-W LED with a maximum output power of 1,800 lumens
- UV light uses 4 x UV LEDs (320mW, 365nm wavelength)
- Glass and dishes with anti-reflective, crystal coating and PDOT treatments
- High-efficiency circuits to allow constant light for up to 50 hours continuously
- Dual rear power and selection buttons, quick and intuitive, designed for tactical applications
- STROBE READY technology that enables instant access to STROBO light
- STROBE light continuously varies randomly in frequency to increase disorientation effect
- Possibility to change the mode of use between Tactical Mode and Daily Mode
- Integrated charging system for Li-ion batteries via USB-C port
- NITECORE 21700 Li-ion battery included
- Impact-resistant silicon nitride front crown for excellent emergency glass-breaking capabilities
- Integrated ATR temperature control system
- Optical type lenses with anti-scratch coverage on both sides
- Made of anodized aircraft aluminum alloy with military grade HA III finish
- Waterproof as per IP68 standard (Submersible to 2 meters depth)
- Withstands impacts up to 2 meters high

Laboratory certified power and lifetime as per ANSI/NEMA FL1 standard using 1x 21700i 3.7V 4000mAh - under different usage conditions or using different batteries, data may vary

LED: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 3, electronically controlled + Strobe
Powers and Times: 1800 lumens (1h 45min.) -> 250 Lumens (8h 30min) -> 35 Lumens (38h) -> UV 320mW (30h) -> Strobe 1800 lumens
Peak power: 28500 candles
Maximum Lighting Distance: 337m
Ignition Method: Rear Button with "Momentary On" system for light signals and Rear Button "Mode" for immediate access to strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2140i, 4,000mAh - included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power.
Measurements: 15.0cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 124g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: thermoplastic, rigid, for quick deployment of the flashlight
Impact resistance: it resists falls from 1.5m height

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - STERILIZING SURFACE MAX 40m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, molds through UV light, DNA or RNA, preventing them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Model: ZWXTD-02
* Body material: painted steel
* Lamp material: quartz
* Rated power: 40W
* Sterilizable surface: <40m²
* Operating voltage: 220V / 50Hz
* 40W lamp dimensions: 180x470 mm.
* Lamp weight 40W: 1030 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - MAX STERILIZING SURFACE 100m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, and molds through light, DNA or RNA and therefore prevents them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Models: ZWXTD-04
* Body material: steel
* Lamp material: quartz
* Rated power: 75W
* Sterilizable surface: <100m²
* Operating voltage: 220V / 50Hz
* Lamp dimensions 75W: 200x665 mm.
* Lamp weight 75W: 1380 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off