Anno 2020
-
ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife
Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/EmergencyType of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for opticsAP-MF1-BC-CP -
Viper - Katla by Vox - 3D Carbon Fiber - V5980FC3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 122g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FC3D -
MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-3CM -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
MKM - Flame Light by Zieba - M390 & Green Micarta - FL02L-GC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-GC -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Boker Plus - Little Friend S35VN Flipper by Vox - 01BO385- knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin
Handle: G10
Blade length: 78.6mm.
Blade thickness: 4mm.
Length when closed: 108mm.
Total length: 188mm.
Weight: 135g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Jesper VoxnaesBO-01BO385 -
MKM - Flame Light by Zieba - M390 & Black Micarta - FL02L-BC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-BC -
Mcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0145G -
Boker Plus - Vox G10 field knife - 01BO375 - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper VoxnaesBO-01BO375 -
Viper - Turn knife by Silvestrelli - Titanium and Micarta - M390 steel - V5986CG - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin finish
Handle: titanium with micarta grips
Blade length: 80mm.
Blade thickness: 4mm.
Closed length: 107mm.
Total length: 190mm.
Thick when closed: 14mm.
Weight: 123g.
Closure: Back Lock
Clip: titanium
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5986CG -
Maserin - Ghost knife - Black G10 - 640 / G10N - knife
The collaboration with Alessandro Zanin continues who has thought of a special knife, Gost Tactical Folder. A light but robust folder, suitable for any use, but with a particular vocation for the CQB - CQC.
The use of the best materials guarantees excellent handling and agility, the excellent balance and the ergonomic study of the handle give an ideal grip with every grip.
The powerful blade instills safety and strength. Finally the knife adjusts to the hand and not vice versa, thus allowing movement and fluidity.Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 85mm.
Blade thickness: 3.2mm.
Closed length: 140mm.
Total length: 220mm.
Thick when closed: 16.4mm.
Weight: 225g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Alessandro ZaninMA-640/G10N -
Viper - Katla by Vox - 3D Satin Titanium - V5982TI3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Satinized titanium 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 137g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5982TI3D -
Viper - Katla by Vox - 3D Marbled Carbon Fiber - V5980FCM3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FCM3D -
Viper - Drop Montone by Fabrizio "Silvester" Silvestrelli - V5700MO knife
Intended use: sportsman / gentleman
Type of production: industrial
Lama production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: ram horn, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio SilvestrelliV5700MO -
MKM & Fox - Isonzo Clip Green by Vox - MK-FX03-3PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade treatment: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGO -
MKM & Fox - Isonzo Clip Gray by Vox - MK-FX03-3PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGY -
MKM & Fox - Isonzo Cleaver Green by Vox - MK-FX03-2PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGO -
MKM & Fox - Isonzo Cleaver Gray by Vox - MK-FX03-2PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGY -
MKM & Fox - Isonzo Hawkbill Gray by Vox - MK-FX03-1PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGY -
MKM & Fox - Isonzo Hawkbill Green by Vox - MK-FX03-1PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGO -
Fox - Baby Core by Vox - FX-608OR - Orange & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608OR -
Fox - Baby Core knife by Vox - FX-608BL - Blue & Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608BL -
Fox - Baby Core by Vox - FX-608R - Red & Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608R -
Fox - Baby Core by Vox - FX-608B - Black & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608B -
Zero Tolerance - SpeedSafe Flipper - BlackWash - ZT0357BW - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357BW -
Zero Tolerance - SpeedSafe Flipper - Stone Washed - ZT0357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357 -
Gerber - Key Note Flipper - Black & Tan - 30-001692 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Teflon coating
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper systemG30-001692 -
Gerber - Key Note Flipper - Satin & Black - 30-001691 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper systemG30-001691 -
Spyderco - Emphasis - C245GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 211mm.
Weight: 147g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C245GP -
Spyderco - Insistent - C246GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 155mm.
Weight: 113g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C246GP -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
MKM & Viper - Timavo Flipper by Vox - Green Micarta - VP02-GC - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GC -
ExtremaRatio - T911 Tuscania Rescue Tool - folding knife
On December 19, 1941, in Eluet El Asel, about 400 men from the 1st Royal Carabinieri Battalion Paratrooper faced the assault of 4 battalions of Indian troops of the British Army. Jumping from their trenches by launching improvised devices, the "Desert Lions", as Radio London called them, made the defensive line impenetrable by allowing thousands of Italian-German troops to withdraw safely. This was the first page in the long history of Italian paratroopers.
The Tuscania Paratrooper Regiment asked that the Extra Ratio T911 be specifically made as a commemorative knife for its 80th anniversary.
The T911 is a medium-sized folding light and designed for professional use by military operators. It is equipped with a modified spear point blade, flat edge, in Bohler N690 cobalt steel heat-treated to a hardness of 58 HRC, for the best compromise between strength, ease of regrinding and thread hold. The blade is 76 mm long, 4 mm thick, has a stone washed finish and rotates around an adjustable pin which allows to obtain the best fluidity in opening. A brace allows you to lock the pin in the best position.
The handle is in Anticorodal aluminum alloy with high strength black anodized finish and is milled to facilitate the transition from "reverse grip" handle to saber handle.
The blade is opened by means of a pin operated with the thumb. The knife uses a liner lock type blade lock and a safe ensures maximum hold even during heavy use. The safety lever is colored red for better visibility and engages in an advanced position for more instinctive use.
In the handle are integrated a seat belt cutter with easily available and replaceable cutter-type blade, a tungsten glass breaker, a stainless steel knot loosener and a screwdriver for adjusting the pointing optics, in AISI 420 steel. The clip , reversible and fixed at the end of the handle, allows a very deep port in the pocket, for less visibility.
The knife can be dismantled for cleaning and maintenance. With a total length of 194 mm and a weight of 145g, the T911 is easy to wear both in uniform and in civilian clothes.
Intended use: Tactical / Emergency
Type of production: Industrial
Lama production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Anticorodal
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 194mm.
Thick when closed: 24mm.
Weight: 145g.
Closing: Liner Lock
Clip: Stainless steel
Packaging: black cardboard box with Extrema Ratio logos
Notes: belt cutter, glass breaker, screwdriver for optics, stainless steel knot loosersER-T911 -
Cold Steel - Ti-Lite 4" - Aluminium S35VN - 26B4 - knife
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Micro shot peening
Handle: CNC machined 7075 aluminum
Blade length: 102mm.
Blade thickness: 3mm.
Length closed: 121mm.
Total length: 222mm.
Weight: 135g.
Closing: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Note: -CS26B4 -
Spyderco - Military Black Plain - C36GPBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Blade production: U.S.A.
Blade: Stainless steel CPM 30SV
Blade Treatment: BodyCote black
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total length: 241mm.
Thickness when closed: 15mm.
Balance: -
Weight: 122g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: cardboard box with Spyderco logos
Notes: -C36GPBK -
Viper - Katla Knife by Vox - Damascus - Dark Matter Carbon Fiber - Limited Edition - VA5980FCM - Knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which brings back the Tanto profile blade with a bevel that enhances the excellent cutting qualities.
The rotation mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.
The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern way, the inlays of the classic Viper models.
The flat edges and the titanium clip allow for comfortable and discreet carry.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Italy
Blade: Super Dense Twist stainless Damascus
Blade finish: Satin
Handle: Dark matter carbon fiber
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 122g.
Lock: Liner Lock
Clip: Titanium
Packaging: Deluxe cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearing - Damascus SSCT spacer - limited edition of 100 piecesVA5980FCM -
Viper - Katla by Vox - Black Canvas Micarta - V5982CB - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, featuring a Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotating mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.
The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern key, the inlays of the classic Viper models.
The flat edges and the titanium clip allow for comfortable and discreet carry.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60/61HRC
Blade finish: Stonewashed
Handle: Walnut
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 107g.
Lock: Liner Lock
Clip: Titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearingV5985NO -
Cold Steel - Caledonian knife - PRIVATE COLLECTION - San Mai III - Micarta Handles - CS60CE
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratoryIntended use: Sporting / Utility
Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.
The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle.
The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.
The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.
AP-CS-60CE -
Sergio Consoli - Folder Liner Lock - PRIVATE COLLECTION - holographic resin handle - N ° 480
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019CON-480 -
Zero Tolerance - Scavenger Matte knife Black - PRIVATE COLLECTION - ZT0400 knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria ColliniIntended use: Tactical / Military
Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening systemAP-ZT0400CP -
Master of Defense - Point Man Plain Edge - Trident Utility knife - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM black
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 112mm
Total length: 200mm.
Thickness when closed: 13mm
Weight: 116g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: knife withdrawn from private collection in excellent conditionMOD-PMPE-CP -
Mcusta - Platinum Label Blade Show 2022 Limited Edition - MCPLBS-22 - knife
Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.
Intended use: collectionType of production: industrial cutting - craftsmanship, assembly and finishing
Country of production: Seki - Japan
Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
Handle: made of Mokume stainless damask steel and wood briar
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 208g.
Closure: Liner Lock
Clip: handcrafted, removable and reversible, hammered stainless steel
Packaging: wooden box with Mcusta logos
Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022MC-PLBS22 -
Mcusta - Shinari Shinra Maxima knife - SPG2 - PRIVATE COLLECTION - Green Pakka Wood - MC-0203G - knife
Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.
The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can visit the website: www.collinisteel.com
AP-MC-0203G -
Spyderco - Viele - C42S - 1997 Made in Japan from PRIVATE COLLECTION - knife
Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.
Intended Use: Collection/SportingProduction Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.SP-C42S-97 -
Master of Defense - Tempest knife SW by Michael Janich Design - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.
Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,
Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
The only copy at our disposal, without box, very rare and out of production for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel
Handle: Aviation aluminum with Kraton anti-slip inserts
Blade length: 86mm.
Blade thickness: 3.5mm.
Closed length: 112mm
Total length: 200mm.
Thick when closed: 13mm
Weight: 120g.
Closure: Liner Lock
Clip: removable, in stainless steel
Packaging:MOD-TEMSW-CP -
Mcusta - Petit Damascus knife - VG10 steel - Micarta Blue and Black - MC-0212D - knife
Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -MC-0212D -
Mcusta - Petit Damascus knife - VG10 steel - Micarta Orange and Black - MC-0211D - knife
Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -MC-0211D -
Fox - Core knife by Vox - Special Edition in SanMai SPG2 Steel - Black - CO-604-B - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-604-B -
Fox - Core knife by Vox - Special Edition in SanMai SPG2 Steel - Green - CO-604-OD - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-604-OD -
Kershaw - Fraxion knife by Anso - Tan - 1160TAN - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment:
Handle: G10 and Carbon Fiber
Blade length: 70mm.
Blade thickness: 2.7mm.
Closed length: 103mm.
Total length: 171mm.
Thick when closed: 9.7mm.
Balancing: -
Weight: 54g.
Opening: Carson Flipper system
Washers: in brass, with ball bearings
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: Design by Jens AnsoK1160TAN -
Rockstead - Shin knife - ZDP189 in SanMai - PRIVATE COLLECTION - knife
Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.
Checked and certified by our internal laboratory - Collini Cutlery.
The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.
Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.RO-S-ZDP-CP -
Viper - Katla by Vox - Black Canvas Micarta - V5982CB - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 107g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5982CB -
Viper - Drop Tulipano by Fabrizio "Silvester" Silvestrelli - 5700TW knife
Intended use: sportsman / gentleman
Type of production: industrial
Lama production: Italy
Blade: Nitro-B stainless steel
Blade treatment: -
Handle: in tulip, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio Silvestrelli5700TW -
Mcusta - Yatagarasu collection knife - Limited Edition - MCSY-001 - knife
Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.
Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.Intended use: collection
Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 piecesFor more information on the steel used you can view the site: www.collinisteel.com
MCSY-001 -
Mcusta - Takeri Shinra Maxima knife - SPG2 Powder Steel - Damascius - MC-0202G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0202G -
Mcusta - Shinari Shinra Maxima knife - SPG2 Powder Steel - Green Pakka Wood - MC-0203G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0203G -
Mcusta - Minagi Shinra Maxima knife - SPG2 Powder Steel - Blue Micarta - MC-0201G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0201G -
Mcusta - Bamboo knife black pakka wood - SPG2 Powder Steel - MC-0146G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
Intended use: dirty / collection
Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0146G -
Spyderco - Tenacious Lightweight - Black Plain - C122PBBK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Teflon coating
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Weight: 105g.
Closure: Liner Lock
Clip: Removable, multi-position, Teflon coated stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C122PBBK -
CRKT - CEO by Rogers - 7096 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096 -
Max Salice Sanna - Daghetta in Damasteel damask and carbon fiber - PRIVATE COLLECTION - custom
Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by MaxMassimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.
MAX-DAG-CP -
Fox - Alaskan Hunter Folding by Russ Kommer - FX-622B - knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Italy
Blade: in Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade finish: Black Idroglider
Handle: G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 198mm.
Thick when closed: 10.3mm.
Weight: 129g.
Closing: Liner Lock
Clip: stainless steel, removable, with Black Idroglider finish
Packaging: Cardboard box with Fox logos
Notes: Design by Russ KommerFX-622B -
Sergio Consoli - Custom Liner Lock folder - N ° 271 - PRIVATE COLLECTION - handmade knife
Intended use: Collection
Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009Acknowledgments
I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize as the best closable
but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.
Presentation of the craftsman
Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.
The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .
The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.
With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.
Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".
Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...CON-271 -
MKM & Viper - Timavo Flipper by Vox - Black G10 - VP02-GBK - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G10
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 111g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GBK -
MKM & Viper - Timavo Flipper by Vox - Blackwashed Titanium - VP02-TDSW - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Blackwash
Handle: Titanium Gr. 5 Ti6AI4V Blackwashed
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-TDSW -
Mcusta - Teana knife - Shinra Mixture - SPG2 Powder Steel - MC-0143G - knife
Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives
Intended use: dirty / collection
Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: satin steel and wooden insert
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 168mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: present
Sheath: cordura
Note: -MC-0143G