approved

handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.

Intended use: collection / hunting

Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsman

Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

Checked and certified by our internal laboratory - Collini Cutlery.

The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.

Private retired knife - Rare model produced by Zero Tolerance until 2014 - Overall in good condition, with two scratches on the right side of the blade - Without original box - Original sharpening - Checked and certified by our in-house Coltelleria Collini laboratory.

Intended use: Tactical

Type of production: Industrial
Production Lama: USA
Blade: full tang in CPM-S30V steel
Blade treatment: Tungsten DLC
Handle: G-10 with 3D processing
Blade length: 105mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 205mm.
Thick when closed: -
Balancing: back to 1.5cm
Weight: 264g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: cardboard box with Zero Tolerance logos
Notes: design by Mick Strider

Knife withdrawn from a private collection - Very rare model made by knifemaker Howard Hitchmough in 2005 - Like new condition. Never regrind - Checked and certified by our in-house Coltelleria Collini laboratory.

Intended use: collection

Type of production: custom
Production Lama: U.S.A.
Blade: Handmade damask
Blade treatment: -
Handle: ironwood
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 188mm.
Thick when closed: 9mm
Balancing: -
Weight: 92g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -

Howard Hitchmough was born and raised in London, where he began working in 1958 as a manufacturer of surgical instruments and during the early 1960s to produce hunting knives. In those years Howard, fascinated by the locking mechanisms, began to build folding knives. In 1982, he began attending knife shows in the United States and shortly thereafter, in 1985 he became a full time knife manufacturer. In 1997, Howard moved from England to New Hampshire where he built a high-end laboratory. Hitchmough is today a highly rated Knifemaker for the high level of his production and for the continuous ability to study and evolve his creations for quality and precision.

Knife withdrawn from a private collection - Excellent condition, small marks on the sleeve - no longer in production - Without original box - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Sports / Collection

Type of production: Industrial
Blade production: JAPAN
Blade: VG10 stainless steel
Blade treatment: -
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Length closed 110mm.
Total length: 175mm.
Balancing: -
Weight: 101g.
Closure: Liner Lock
Clip: removable, stainless steel
Sheath: -
Packaging:
Note:

Knife withdrawn from a private collection - Excellent condition, has small marks and scratches on the titanium sleeve, factory sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / EDC / Collection

Type of production: semi-artisan
Country of production: USA
Blade: in CTS-XHP Black stainless steel
Blade treatment: Black PVD
Handle: Grade 5 titanium
Blade length: 92mm.
Blade thickness: 5mm.
Length closed: 122mm.
Total length: 216mm.
Thick when closed: 13.2mm.
Balancing: -
Weight: 187g.
Opening: titanium thumbstood for right-handers
Washers: Steel ball bearings
Closing: Framelock
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearings

famous survival knife produced by the Spanish Aitor, characterized by the sturdiness and the multiplicity of functions offered by the knife and the tools present in the sheath. Withdrawn from a private collection - Model no longer in production since 2015 - Like new condition - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / Collection

Type of production: Industrial
Lama production: Italy
Blade: 440C stainless steel
Blade treatment: Satin
Handle: aluminum
Blade length: 210mm.
Blade thickness: 5mm.
Total length: 360mm.
Weight: 518g.
Sheath: in polymers with multipurpose accessories included
Packaging: Cardboard box with Aitor logos
Note: -

Uses common in the knife: thread, hooks, sinkers, needles, safety pins, a useful skinner tool, compass, paracord lanyard, guard with holes to improvise a harpoon, mirror for signaling, magnesium flint, small scalpel, patches and the legendary sheath with the slingshot

Knife withdrawn from a private collection - Rare model produced in limited edition by Lion Steel in 2011 for an Italian company no longer existing called Knife Research - Like new condition - Never re-sharpened - With original box and sheath - Checked and certified by our internal laboratory Collini cutlery.

Intended use: Utility

Type of production: Industrial
Lama production: Italy
Blade: Sleipner 60HRC steel
Blade treatment: -
Handle: G-10
Blade length: 170mm.
Blade thickness: 5.6mm.
Length closed: -
Total length: 300mm.
Thick when closed: -
Balancing: -
Weight: 410g.
Closing: -
Clip: -
Sheath: modular, in Kydex, with M.O.L.L.E.
Packaging: -
Notes: Design by Molletta

Withdrawn from a private collection, this classic model 110 by the American Buck is exclusive for the engraving on the blade that celebrates the 50th anniversary of the California Highway Patrol - Model dating back to 1982 - Like new condition, never used, with certificates and box original - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel engraved
Blade treatment: -
Handle: wood and brass
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 220mm.
Thick when closed: 16mm.
Balancing: -
Weight: 205g.
Closing: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with Buck logos
Note: -
Send feedback
History
Saved
Community

Beautiful custom pocket knife made by Joe Kious around the 90s. Knife withdrawn from a private collection - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection

Type of production: custom
Blade production: USA
Blade: 2 ATS-34 stainless steel blades
Handle: in steel and mother of pearl
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 103mm.
Total length: 185mm.
Thick when closed: 14mm
Weight: 84g.
Closing: retentive
Packaging: cardboard box with Case logos

The knife maker Joe Kious is considered among the best American custom ever, specializing in the creation of "high-end" pocket knives. A longtime Guild Knifemakers member, he passed away in 2014. Resident in Kerrville, Texas, Kious was a full-time knife maker who sold his first knife in 1969. He made knives that exceeded $ 10,000.

Intended use: Collection

Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009

Acknowledgments

I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize as the best closable

but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.

Presentation of the craftsman

Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.

The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .

The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.

With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.

Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".

Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...

Collector's knife from a private collection - Model TTFF1 by Medford with custom Black Blood treatment and black coating of the sleeve by Dino Picco by Wander Tactical - Excellent condition with original box - Regrinded - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / Collection

Type of production: Custom
Blade production: Usa
Blade: D2 steel
Blade treatment: -
Handle: aluminum and titanium
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 245mm.
Thick when closed: 13mm.
Balancing: on the guard branch
Weight: 252g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford - Black Blood blade treatment and handle repainted by Wander Tactical designer Dino Picco

Knife withdrawn from a private collection - Rare model produced by Spyderco to commemorate New York police officer John D'allara who died when he entered the World Trade Center on September 11, 2001 - no longer in production since 2005 - Like new condition - With original box - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Sports

Type of production: Industrial
Blade production: Japan
Blade: VG10 Stainless Steel
Handle: FRN with drowned stainless steel folders
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 203mm.
Weight: 164g.
Closing: Spyderco’s Ball Bearing Lock
Clip: stainless steel
Packaging: with box
Notes: -

Knife withdrawn from a private collection - Beautiful unique piece made in the late 90s by the famous American Knifemaker Frank Centofante who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Gentleman

Type of production: Artisan
Blade production: USA
Blade: ATS34 stainless steel
Blade treatment: -
Handle: damasco and Abalone
Blade length: 75mm
Blade thickness: 2.5mm.
Length closed: 102mm.
Total length: 180mm.
Thick when closed: 11mm.
Balancing: -
Weight: 102g.
Closing: Back Lock
Clip: -
Sheath: -
Packaging: -
Notes: rare handmade knife made by the well-known American knife maker Frank Centofante who recently passed away, serial number 023

Frank Centofante is a well-known legend in the worldwide custom cutlery industry.

Frank started producing knives on a professional level in 1970, in 1971 he joined the Knifemakers Guild holding the position of President between 1989 and 1996. He was also a member of the Cutlery Hall of Fame and of the Italian Knifemakers Guild.

He was particularly known for the production of high-end collectible folding knives.

Frank Centofante died on September 7, 2009 after suffering from a long illness.
Send feedback
History
Saved
Community

Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium
Blade length: 953mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm
Balancing: -
Weight: 108g.
Closure: Frame Lock
Clip: titanium
Sheath: -
Note: -

Withdrawn knife from private collection - Very rare piece made in Japan around the mid-90s, it was one of the first models of this series produced by SOG. Perfect knife, like new only without box.

Controlled and certified by our internal laboratory - Collini Cutlery.

Intended use: collection / tactical

Type of production: industrial
Blade: in stainless steel AUS6
Blade treatment: -
Handle: kraton
Blade length: 115mm.
Blade thickness: 5mm.
Length closed: -
Total length: 225mm.
Balancing: set back, 1cm from the guard branch
Weight: 118g.
Closing: -
Production: Japan
Sheath: in leather
Note: -

Knife withdrawn from private collection - Like new condition - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: handmade blade and handle - industrial folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: titanium briefcases with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Thick when closed: -mm.
Balancing: -
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing time: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Note: -

Retired knife from a private collection - Goblobally in good condition, sharpened and used. Has slight scratches at different points on the blade - Sheath in good condition - The box and the cardboard box are in excellent condition. Recommended purchase if used due to the very interesting price, not recommended for collection use.

Intended use: Hiking / Hunting

Blade: hidden tang, in CoS 60HRC laminated stainless steel
Handle: Thermorun, with stainless steel guard
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 365g.
Sheath: in zytel
Notes: cardboard box with Fallkniven logos, watertight ABS casket with fallkniven logos, Fallkniven DC4 sharpening stone with leather case

Withdrawn knife from a private collection - Collection 90s Police model with ATS-55 steel - Globally in good condition. Has very light scratches on the steel handle - No box or certificates

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: ATS-55 stainless steel
Blade treatment: -
Handle: steel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balancing: -
Weight: 158g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: without box
Note:

Withdrawn knife from private collection - Rare model of the Sog, Trident Bowie produced in Japan and no longer in production for 15 years from a collection of the 90s - Globally in good condition. It has very slight scratches on the blade - Free of box, original sheath and certificates - Checked, reground and certified by our internal laboratory Collini Cutlery.

Intended use: sports / tactical / collection

Type of production: industrial
Blade: stainless steel AUS-8
Blade treatment: -
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: -
Total length: 278mm.
Balancing: set back, 1cm from the guard branch
Weight: 312g.
Closing: -
Country of Production: Japan
Sheath: Cordura sheath NOT ORIGINAL
Notes: knife produced between 1986 and 2004

Original Rambo 1 model with signature John Rambo Hollywood Collectibles Group - USED knife with scratches on the blade.

Original new leather sheath (of the version without signature) - original box (of the version without signature)

Re-sharpened, checked and certified by our internal laboratory - Collini Cutlery.

Intended use: Survival / Collection

Manufacturer: -
Blade: 420 Stainless Steel.
Handle: Aluminum and paracord
Blade length: 225mm.
Blade thickness: 5.5mm.
Handle length: 100mm.
Total length: 350mm.
Balancing: on the guard branch
Weight: 416g.
Sheath: in leather
Notes: limited and numbered edition signed by John Rambo - compass and survival kit in the handle

Withdrawn knife from a private collection - A rare model produced by Microtech in 2002 and designed by the famous knifemaker Greg Lightfoot - Globally in excellent condition. It has very light marks on the bloster - Never sharpened - Free of original box - Checked and certified by our internal laboratory Collini Cutlery.

Intended use: collection

Type of production: Industrial
Lama production: Use
Blade: CPM-S30V steel
Handle: in titanium and carbon fiber
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 210mm.
Thick when closed: 14mm.
Weight: 156g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: -
Note: -

Extrema Ratio Nemesis original model - USED knife with scratches on the blade and on the handle.

Extrema original box

Re-sharpened, checked and certified by our internal laboratory - Collini Cutlery.

Intended use: tactical / military / backup

Blade: stainless steel N690Co 58HRC
Handle: Anticorodal thickness 4.5mm
Blade length: 115mm.
Blade thickness: 6mm.
Length closed: 148
Total length: 260mm.
Balancing: -
Weight: 235g.
Closure: Back Lock
Clip: no clip
Sheath: -
Notes: safety stop both in opening and closing

Withdrawn knife from private collection - Rare model handcrafted by Bob Terzuola in the early 2000s - Globally in excellent condition. Has light scratches on the titanium clip - Never reground - Checked and certified by our in-house Collini Cutlery workshop.

Intended use: Collection

Type of production: handmade
Country of production: USA
Blade: CPM-154CM stainless steel
Finish: stonewashed
Handle: in titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3.1mm.
Closed length: 92mm.
Total length: 175mm.
Weight: 78g.
Closure: Liner Lock
Clip: titanium, machined from solid, removable
Notes: made entirely by hand by Robert Terzuola - from a private collection

Knife withdrawn from private - Model Tryceratopo first series 2014 - Globally in good condition. It has small scratches on the blade plate caused by the insertion in the kydex sheath - perfect original sharpening - equipped with a certificate - controlled and certified by our internal laboratory Collini Cutlery.

Type of production: Artisan
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: OD Green
Handle: Micarta
Blade length: 65mm.
Blade thickness: 5mm.
Total length: 134mm.
Balancing: set back
Weight: 180g.
Sheath: in Kydex, thermoformed, with leather attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Withdrawn knife from private collection - Model Shooters Chosen no longer in production - Globally in excellent condition. Controlled, resharpened and certified by our internal laboratory Collini Cutlery.

Model: M.P.C.
Destination: General use
Lung. Total: 260 mm
Blade: 115 mm
Weight: 245 gr
Thick. Blade: 6 mm
Mat. Blade: N690 cobalt stainless steel
Handle: Anticorodal
Send feedback
History
Saved
Community

Coming from a private collection, this famous Al-Mar model in production since 1990 and impossible to find for years, is fully part of the collection knives. Globally in perfect condition, never sharpened and used. No box.

Intended use: collection
Type of production: industrial
Blade: in stainless steel AUS 8
Blade treatment: -
Production Lama: Japan
Handle: in steel
Blade length: 230mm.
Blade thickness: 6mm.
Length closed: -
Total length: 392mm.
Balancing: on the guard branch
Weight: 616g.
Closing: -
Clip: -
Sheath: in leather
Notes: product out of production

Collector's knife from a private collection - Knife designed by Pohl Force and manufactured by Lion Steel, no longer in production since 2017 - Like new condition, never used, no box - Checked and certified by our internal laboratory Collini Cutlery

Intended use: Tactical / Sports

Type of production: Industrial
Lama production: Italy
Blade: in D2 steel at 59HRC
Blade treatment: Stonewash
Handle: G-10
Blade length: 116mm.
Blade thickness: 6mm.
Length closed: -
Total length: 250mm.
Thick when closed: -
Balancing: -
Weight: 278g.
Closing: -
Clip: -
Sheath: Kydex with H&S hook
Packaging: transport bag with zip, warranty certificate
Note:

Knife withdrawn from a private collection - Knife made in Italy by Viper for Oberland Arms, never officially distributed in Italy, currently discontinued and discontinued - Globally in good condition, some tiny scratches on the blade and handle, original sharpening improved, without original packaging - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical

Type of production: Industrial
Country of production: Italy (by Viper)
Blade: N690Co 58 / 59HRC stainless steel
Blade finish: Black TiNi
Handle: Stonewashed titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 220mm.
Thick when closed: -
Weight: 172g.
Closure: Frame Lock
Clip: flush, stainless steel, removable and reversible
Packaging: -
Notes: Design by Tommaso Rumici - Made in Italy by Viper - Knife withdrawn from a private collection, out of production, never distributed in Italy, globally in good condition

Collector's knife from private collection - Like new condition, with sheath - Checked, certified by our internal laboratory Collini Cutlery

Intended use: tactical / sports

Type of production: Industrial
Country of production: USA
Blade: Fulltang, in 1095 black texture powder coated steel
Handle: G10
Blade length: 145mm.
Blade thickness: 5mm.
Total length: 305mm.
Balancing: on the guard branch
Weight: 366g.
Sheath: nylon, with rigid interior
Packaging: -

Knife withdrawn from a private collection, dates back to the fourth production, that of 1987 and has a rare engraving on the blade with the Camel brand. Globally in good condition, it shows signs on the blade and on the handle - Regrinded and certified by our internal laboratory Coltelleria Collini. The knife is complete with original box, 4 harpoons, compass and sulvival accessories in the handle.

The legendary BuckMaster 184 Survival Knife was conceived and designed specifically for the Navy SEAL Teams in the 1980s. It is a masterpiece created by CJ Buck (CEO of Buck Knives) and designed by a small company, Qual-A-Tec, in 1981 in California. The BuckMaster became the American icon of survuval knives in the 1980s and contributed to the development of the US Army's famous M9 bayonetta. The production was of 2600 specimens per year.

Intended use: Sports / Collection

Type of production: Industrial
Blade production: USA
Blade: knife entirely made of 420HC stainless steel
Blade treatment: -
Handle: steel
Blade length: 185mm.
Blade thickness: 7.5mm.
Length closed: -
Total length: 315mm.
Thick when closed: -
Balancing: backward from the guard branch
Weight: 675g.
Closing: -
Clip: -
Sheath: in black ABS
Packaging: Official cardboard box with Buck logos
Notes: The characteristic, patented, is given by the presence of two detachable screw hooks / hooks. The function of these is simple anchoring. This knife can in fact be used as a throwing hook by attaching a rope to the ring on the knob. The manufacturer guarantees a hold on the harpoons up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater fixing point, and this is the reason for the total steel construction.

Knife withdrawn from a private collection in like new condition, original sharpening - Complete with original certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

Unique piece produced by Wander Tactical, characterized by high strength and the exclusive "Tanto" blade shape

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: handcrafted blade and handle
Country of production: Italy
Blade: in steel D2 at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: black micarta
Blade length: 155mm.
Blade thickness: 6mm.
Total length: 300mm.
Balancing: -
Weight: 558g.
Sheath: in kydex
Packaging: -
Notes: Unique piece - certificate of guarantee

Knife collected from private collection - First series produced, with double branch guard, black handle and flat sheath - Overall in very good conditions - Supplied with original box but without internal protective bags or warranty - Original sharpening - Checked and certified by our internal laboratory Coltelleria Collini.

Intended Use: Tactical/Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Finish: Desert warfare (burnishing with laser treatment)
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balance: backward
Weight: 200g.
Sheath: ABS sheath with Tek-Lok attachment with automatic knife retention system.
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates.

Knife withdrawn from private collection - New condition - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Sports

Type of production: Industrial
Blade production: Japan
Blade: in stainless steel VG10
Blade treatment: -
Handle: Zytel and steel liners
Blade length: 78mm.
Blade thickness: 3mm.
Length closed 109mm.
Total length: 187mm.
Thick when closed: 20.3mm.
Balancing: -
Weight: 104g.
Closing: Arc Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with SOG logos
Note: -

Knife withdrawn from a private collection - Knife no longer in production since 2014 - Like new condition with original box - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Length closed: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closing: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner - Possibility to mount two different types of skull crasher

Collector's knife from a private collection - Snubby by Emerson model with Black Blood treatment by Dino Picco by Wander Tactical - Excellent condition with original box - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / Military

Type of production: Semi-Artisan
Blade production: USA
Blade: 154CM 58 / 59HRC stainless steel
Blade treatment: -
Handle: Titanium and G-10
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 190mm.
Thick when closed: 18mm.
Balancing: -
Weight: 134g.
Closing: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: cardboard box with Emerson logos
Notes: Black Blood blade treatment by Dino Picco

Knife withdrawn from private - Spyderco model out of production since 2014 - Globally in good condition - Controlled and certified by our internal laboratory Collini Cutlery.

Intended use: Tactical / Sports

Type of production: Industrial
Lama production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: -
Bevelling: Full Flat Ground
Handle: G10 and Stainless Steel
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 185mm.
Thick when closed: 14mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: without box
Notes: Design by Fred Perrin, Philippe Perotti and Sacha Thiel

Knife withdrawn from private collection - Rare model produced in limited edition by Lion Steel in 2011 for an Italian company no longer existing called Knife Research - Like new condition - Never re-sharpened - Original scabbard - Checked and certified by our Collini Cutlery internal laboratory.

Intended use: Utility

Type of production: Industrial
Lama production: Italy
Blade: Sleipner 60HRC steel
Blade treatment: -
Handle: G-10
Blade length: 170mm.
Blade thickness: 5.6mm.
Length closed: -
Total length: 300mm.
Thick when closed: -
Balancing: -
Weight: 410g.
Closing: -
Clip: -
Sheath: modular, in Kydex, with M.O.L.L.E.
Packaging: ceramic sharpener, flintlock
Notes: Design by Molletta

Knife withdrawn from private - Discontinued model - Globally in excellent condition - Controlled and certified by our internal laboratory Collini Cutlery.

Intended use: sports

Type of production: Industrial
Lama production: Taiwan
Blade: 440C stainless steel
Blade treatment: -
Handle: Zytel and stainless steel
Blade length: 50mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 120mm.
Thick when closed: -
Balancing: -
Weight: 83g.
Closure: slip joint type
Clip: removable, multi-position, in stainless steel
Sheath: -
Packaging: without packaging
Notes: Design by David Curtiss
Send feedback
History
Saved
Community