blades and scissors

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9377/19 Grafting - Grafting

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 75mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 185mm.
Weight: 42g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.
Send feedback
History
Saved
Community

Victorinox - Grafting knife produced for the Felco brand

Technical features:
- 10cm black Nylon wrists
- brass liner
- 6.5cm stainless steel blade
- weight: 48 gr.

Handcrafted in Japan, near Osaka, are made with the same procedures with which they were produced more than 500 years ago.

Spacious and safe to use, but incredibly sturdy, these scissors designed specifically for the care and maintenance of Bonsai are good substitutes to traditional cutters providing much more control and accuracy during cutting, even in dense foliage.

Great for working on the roots, but also on twigs and buds and whenever it is necessary to carry out painstaking and delicate.

Their wide-grip handle provides maximum security and control during use and clean and precise cut of these specific bonsai scissors avoids crush the roots and branches, thus preserving them from necrosis.

SPECIFICATIONS

Steel: Shirogami White Carbon Steel, with burnished finish
Handle: 9.5cm long and 10cm wide.
Blade length: 5cm
Blade thickness: 5mm
Total length: 18cm

Maintenance: after use, clean and dry the instrument. Before storing olerare blades with paraffin oil or similar in order to avoid the formation of rust and oxidation

Felco - Garden Shears - Model FELCO 11

Reliable: comfortable handles, light, sturdy forged aluminum with a lifetime guarantee * / blade and screw-mounted high-quality hardened steel / clean, precise cut / all parts can be replaced
Efficient: easy, durable cutting adjustment / wire cutting notch / sap groove
Ergonomic: hand protection is provided by the cushion-shock absorber / non-slip coating

Our recommendation (1: * Recommended, 2: ** Strongly recommended, 3: Best fit **)
Viticulture: **
Arboriculture: *
Horticulture: **
Parks and gardens **
Nursery: **
Small hand: *
Hand average: **
Large hand: ***
Left: *

wire cutting
The blades have a notch for cutting small diameter wire without damaging the cutting edge.

Sap groove
The dry blade allows you to cut vegetables, without the risk of gluing the blade. It saves time and makes pruning easier by removing sap and dirt after each cut.

fine adjustment
The adjusting device of FELCO guarantees throughout the life of an optimal adjustment of the cutting head, allowing for a clean and precise cut.

Cushioning system
The sash and reduce the shock impact at the end of the cut, protecting hand and wrist.

Forged aluminum handles
Lightness, strength and rigidity due to an aluminum alloy and the process of shaping the material with precision molding perfectly controlled by FELCO. Parts with a lifetime guarantee *.

To ensure perfect cutting, Collini Cutlery with his lab sharpening internal controls and audits each instrument sold.

Reliable: comfortable handles, light, sturdy forged aluminum with a lifetime guarantee * / blade and screw-mounted high-quality hardened steel / clean, precise cut / all parts can be replaced
Efficient: easy, durable cutting adjustment / wire cutting notch / sap groove
Ergonomic: hand protection, wrist and optimization of efforts by the ideal shape of the handles, the angled head and the cushion-shock absorber / non-slip coating

Our advice
(1: * Recommended, 2: ** Strongly recommended, 3: *** Best fit)

Viticulture: ***
Arboriculture: ***
Horticulture: **
Parks and gardens ***
Nursery: *
Small hand:
Hand average: *
Large hand: ***
Left:

wire cutting
The blades have a notch for cutting small diameter wire without damaging the cutting edge.

Sap groove
The dry blade allows you to cut vegetables, without the risk of gluing the blade. It saves time and makes pruning easier by removing sap and dirt after each cut.

fine adjustment
The adjusting device of FELCO guarantees throughout the life of an optimal adjustment of the cutting head, allowing for a clean and precise cut.

Cushioning system
The sash and reduce the shock impact at the end of the cut, protecting hand and wrist.

Forged aluminum handles
Lightness, strength and rigidity due to an aluminum alloy and the process of shaping the material with precision molding perfectly controlled by FELCO. Parts with a lifetime guarantee *.

To ensure perfect cutting, Collini Cutlery with his lab sharpening internal controls and audits each instrument sold.

Felco - Garden Shears - Model 400

Pruning Shears Garden
Suitable for professional and private use, scissors Felco pruners are used and recommended by professionals in more than 80 countries
Each scissor is regulated and tested by hand

TECHNICAL INFORMATION

Reliable: comfortable handles, light, sturdy forged aluminum with a lifetime guarantee * / blade and riveted anvil high-quality hardened steel / clean, precise cut / all parts can be replaced

Effectiveness: easy cutting adjustment / wire cutters / sap groove

Ergonomics: non-slip coating

RECOMMENDED

Our advice
(* 1: Recommended, 2 **: Strongly recommended, 3 ***: Best fit)

Viticulture: **
Arboriculture: **
Horticulture: *
Parks and gardens **
Nursery: *
Small hand:
Hand average: *
Large hand: ***
Left: *

TECHNICAL SPECIFICATIONS

wire cutting
The blades have a notch for cutting small diameter wire without damaging the cutting edge.

Sap groove
The dry blade allows you to cut vegetables, without the risk of gluing the blade. It saves time and makes pruning easier by removing sap and dirt after each cut.

Forged aluminum handles
Lightness, strength and rigidity due to an aluminum alloy and the process of shaping the material with precision molding perfectly controlled by FELCO. Parts with a lifetime guarantee *.

To ensure perfect cutting, Collini Cutlery with his lab sharpening internal controls and audits each instrument sold.

TECHNICAL SPECIFICATIONS

wire cutting
The blades have a notch for cutting small diameter wire without damaging the cutting edge.

Sap groove
The dry blade allows you to cut vegetables, without the risk of gluing the blade. It saves time and makes pruning easier by removing sap and dirt after each cut.

fine adjustment
The adjusting device of FELCO guarantees throughout the life of an optimal adjustment of the cutting head, allowing for a clean and precise cut.

Cushioning system
The sash and reduce the shock impact at the end of the cut, protecting hand and wrist.

Forged aluminum handles
Lightness, strength and rigidity due to an aluminum alloy and the process of shaping the material with precision molding perfectly controlled by FELCO. Parts with a lifetime guarantee *.

RECOMMENDED FOR

Our advice

* 1: Recommended, 2 **: Strongly recommended, 3 ***: Best

Viticulture: **
Arboriculture: **
Horticulture: **
Parks and gardens ***
Nursery: **
Small hand:
Hand average: *
Large hand: ***
Left:

MAINTENANCE

cleaning
We recommend that you clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

lubrication
After cleaning, it is advisable to oil the tool to protect it from corrosion. The oil will also unlock in the event of a paper jam.

sharpening
Is advisable to sharpen your tool at least once a day, but if you think not cutting as well as usual, sharpen it right away!

disassembly
Is advisable to dismantle your tool on a regular basis, and at the latest when it appears to be jammed.

Victorinox - Coltello da innesto leggero

Caratteristiche tecniche:
Guance in Nylon rosso da 10cm
piattine doppie in alluminio
lama in acciaio inox da 6.5cm

Handcrafted in Japan, near Osaka, are made with the same procedures with which they were produced more than 500 years ago.

Compact, very quick to use and incredibly robust, these scissors designed specifically for the care and maintenance of Bonsai prove an indispensable tool for ensuring daily defoliation control and accuracy during cutting, even in dense foliage. Their conformation rear spring ensures rapid use extreme without straining the user.

The term defoliation is the process of partial or total elimination of the leaves in deciduous species. In addition to reducing the size of the leaves, this technique is also applied to increase the branching inner end on the shaft with the structure already formed.

SPECIFICATIONS

Steel: Steel Shirogami White Carbon
Blade length: 5.5cm
Blade thickness: 2mm
Total length: 12cm

Maintenance: after use, clean and dry the instrument. Before storing olerare blades with paraffin oil or similar in order to avoid the formation of rust and oxidation

Handcrafted in Japan, near Osaka, are made with the same procedures with which they were produced more than 500 years ago.

Compact, very quick to use and incredibly robust, these scissors designed specifically for the care and maintenance of Bonsai prove an indispensable tool for ensuring daily defoliation control and accuracy during cutting, even in dense foliage. Their conformation rear spring ensures rapid use extreme without straining the user.

The term defoliation is the process of partial or total elimination of the leaves in deciduous species. In addition to reducing the size of the leaves, this technique is also applied to increase the branching inner end on the shaft with the structure already formed.

SPECIFICATIONS

Steel: Shirogami White Carbon Steel, with burnished finish
Blade length: 5.2cm
Blade thickness: 2mm
Total length: 12cm

Maintenance: after use, clean and dry the instrument. Before storing olerare blades with paraffin oil or similar in order to avoid the formation of rust and oxidation