bowie knives and machetes

Intended use: Chopper / Machete

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel, hardened to 54HRC N690Co
Treatment Lama: Testudo
Handle: Forprene
Blade length: 280mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 370g.
Closing: -
Clip: -
Sheath: Nylon with attacks belt and MOLLE type
Packaging: Cardboard box with logos Extrema Ratio
Notes: Studied and designed to sever the thick vegetation broadleaf, typical of tropical forests and rainforests.

WAKI XXV ANNIVERSARIUM LIMITED EDITION is a limited series version of only 150 pieces that keeps all the features of the famous Waki model intact.

This product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai always carried in contact with the body, where the Katana was carried exclusively in battle.

The blade has the classic Japanese Tanto profile and is made of Böhler N690 steel with heat treatments that raise its hardness to 58 HRC for the best combination of edge hold and strength. The blade, with flat rounding, features a precious satin finish.

The handle, in black coloring, is made of Forprene while The black-colored Cordura sheath is equipped with a MOLLE system that ensures safe carrying of the razor-sharp blade by protecting it from shocks that could reduce its efficiency.

WAKI XXV ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weather, dust and shock resistant. Also inside is a metal plaque with the numbering of the limited series of 150 and a commemorative coin of the twenty-fifth Extrema Ratio anniversary.

Intended Use: Collection / Tactical / Machete

Production type: Industrial
Country of manufacture: Italy
Blade: N690Co stainless steel at 58HRC
Blade Treatment: Satin finish
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: polypropylene case with numbered metal plaque and commemorative coin with Extrema Ratio logos
Notes: Limited and numbered edition made in only 150 pieces

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Kukri knife has been designed to be a highly durable hiking knife. The kukri features a blade of over 22cm, making it an all-around tool due to its center of mass, allowing the user to slice while cutting to even penetrate thick objects.

While this blade is primarily famous for its military use, the kukri is more commonly employed as a multi-purpose tool in fields and homes across Nepal. Its uses range from construction, clearing, cutting firewood, digging, butchering animals for food, slicing meat and vegetables, skinning animals, to opening cans.

It can function as a smaller knife using the narrower part of the blade closer to the handle. The heavier and wider end of the blade, towards the tip, functions as a hatchet or a small shovel.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 223mm
Blade Thickness: 6.3mm
Overall Length: 352mm
Weight: 580g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without having to sacrifice USA-made production.

Knife from a private collection

* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Intended use: Collection / Survival

Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in Italy

Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.

* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.

Intended use: Collection / Survival

Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent condition

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Camo
Handle: Micarta
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 347mm.
Balancing: backward
Weight: 510g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Dimorphodon with clip point tip and Rambo knife style blade - Limited Edition - Each knife is unique and handcrafted

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Black Blood dual tone
Handle: Micarta
Blade length: 198mm.
Blade thickness: 5mm.
Total length: 345mm.
Balancing: backward
Weight: 436g.
Sheath: in brown leather
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Dimorphodon with clip point tip and Rambo knife style blade - Limited Edition - Each knife is unique and handcrafted

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Bronze Lava Field
Handle: Micarta
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 347mm.
Balancing: backward
Weight: 500g.
Sheath: in brown leather
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: First example blade treatment - Prototypo - Each knife is unique and handcrafted

Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.

Intended use: Collection/Survival

Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good condition

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

We don't know where your next expedition will take you, but one thing's for sure: there's nothing more important than reliable, quality gear. In designing our flagship P500, we combined the seemingly incompatible. We ground the high-quality Swedish Sleipner steel blade at two different angles. Near the handle is a high sharpness suitable for normal cutting and finer work, while the front has a very durable low, bellied sharpness that shifts the knife's center of gravity significantly toward the tip allowing you to use it on hardwoods and materials with great power. For safe and controlled work, the back of the "five hundred" handle also widens significantly which, in combination with the grippy G10 composite surface, forms a secure and comfortable grip. 

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: Full tang, made of Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 190mm.
Blade thickness: 5mm.
Total length: 330mm.
Weight: 377g.
Scabbard: Black leather
Package: Cardboard box with ANV logos
Notes: -

Knife out of production and no longer available, from a private collection, previously used, re-sharpened and with signs of wear on the finish of the blade and the sheath - Overall in good condition, previously used, still has a very good sharpness and shows some signs of wear on the finish of the blade - Handle in perfect condition - The sheath shows visible signs of wear but does not affect in any way the functionality, use or portability - Accompanied by original cardboard box - Checked and guaranteed by our internal laboratory.

Intended Use: Tactical / Hiking

Type of production: industrial
Blade: Stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: in forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: advanced, at 45mm from the lower guard branch
Weight: 380g.
Sheath: Cordura 1000D OD Green, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC

Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.

The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that, despite its historical roots, presents itself as a modern, tactical tool in the unmistakable Pohl design.

Only high quality, durable materials are used in its construction: Stainless steel 90Cr18MoV (440C) hardened to 57/58HRC gives the 20cm long, 6mm thick Bowie blade high corrosion resistance and excellent edge retention. The full tang construction culminates in a G-10 handle that finishes with a unique aesthetic element that impresses with its dramatic design.

The black surface with three-dimensional millings on the handle contrasts colourfully with the blade in a two-tone finish. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted paracord camouflage lanyard that distinguishes all Pohl Force productions and corresponds exactly to the same paracord used in the filming of the movie.

The knife comes with a top-quality leather sheath and is sold with a 3D Velcro patch and a cloth for care and cleaning.

Intended use: Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 350mm.
Weight: 538g.
Scabbard: Leather
Packaging: 3D Velcro patch - Cleaning cloth

With the Pohl Force MK-8 and MK-9 knives at its side comes the conclusion of the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen.

The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that despite its historical roots presents itself as a modern, tactical tool in the unmistakable Pohl design.

Only high quality and resistant materials are used for its production: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives to the Bowie blade, 20cm long and 6mm thick, a high resistance to corrosion and an excellent edge retention. The full tang construction culminates in a G-10 handle that ends in a unique aesthetic element that impresses with its dramatic design.

The black surface with three-dimensional millings on the handle sits in chromatic contrast to the two-tone finish blade. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.

The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.

Each knife is numbered on both the blade and certificate.

Intended use: Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 350mm.
Weight: 538g.
Scabbard: Thermoformed, in Kydex
Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Blade: Full tang carbon steel
Conformation: Dui Chirra
Kauri: covered
Aunlo-Bal: -
Handle: wood
Blade length: 310mm.
Blade thickness: 6.5mm.
Total length: 435mm.
Karda: -
Chakmak: -
Weight: 760g.
Sheath: in wood and leather
Notes: Original Nepalese knife entirely handmade

Intended use: Tactical / Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang, in 5160 carbon steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 254mm.
Total length: 406mm.
Balancing: Advanced
Weight: 655g.
Sheath: Nylon and Polyester
Packaging: Cardboard box with Buck logos
Note: -

Intended use: Sports / Hunting / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: carbon steel O-1
Blade treatment: satin finish
Handle: micarta, with brass guard
Blade length: 269mm.
Blade thickness: 7.6mm.
Total length: 399mm.
Balancing: advanced
Weight: 483g.
Sheath: in ABS, of the SecurEx type
Packaging: cardboard box with Cold Steel logos
Note: -

Type of production: Artisan
Blade production: Italy
Blade: D2 steel at 59 / 60HRC
Blade Treatment: Raw Finish
Manicure: Micarta Brown
Blade Length: 200mm.
Blade thickness: 6.3mm.
Total length: 347mm.
Balance: backward
Weight: 585g.
Sheath: in Kydex, thermoformed, with a Tek-Lok attachment
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed product.

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -

Use: Sporting 

Production Type: Industrial
Country of Production: Taiwan
Blade: stainless steel AUS-8A
Blade finishing: stonewashed
Handle: Kray-Ex kraton
Blade Length: 229mm.
Blade thickness: 4,7mm.
Total length: 359mm.
Balance: on guard branch
Weight: 352g.
Scabbard: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -

Sturdy bowie knife with clip point blade made of steel with a high carbon content.

Employment: Sports / Collection

Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:

Intended use: Hard Utility / Survival

Type of production: industrial seeds
Country of production: USA
Blade: CPM-154CM stainless steel 58 / 60HRC with cryogenic treatment
Blade finish: tumbled
Handle: micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 273mm.
Balancing: coinciding with the lower guard branch
Weight: 931g.
Sheath: in thermoformed kydex with 360 ° rotating steel clips
Notes: Design by Tom Brown - used in the film The Hunted with Benicio Del Toro

Intended use: Hiking

Type of production: Industrial
Country of production: South Africa
Blade: 1055 carbon steel
Blade treatment: black protective paint
Handle: Polypropylene
Blade length: 330mm.
Blade thickness: 3mm.
Total length: 470mm.
Balancing: Advanced
Weight: 566g.
Opening: Carson Flipper system
Sheath: Nylon with rigid plastic parts
Packaging: Transparent plastic bag
Note: -

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Blade treatment: Black Idroglider
Handle: Forprene
Blade length: 190mm.
Blade thickness: 5mm.
Overall length: 320mm.
Balancing: Advanced to 3cm. by guard branch
Weight: 370g.
Sheath: Nylon
Packaging: cardboard box with Fox logos
Notes: designed and developed in collaboration with Alfredo Doricchi

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co 58/60 HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Overall length: 310mm.
Balancing: Advanced to 2cm. by guard branch
Weight: 330g.
Sheath: Nylon, from thigh
Packaging: cardboard box with Fox logos
Notes: -

The Dimorphodon is a pure cutting instrument, is the evolution of a modern twist of the classic American frontier knife.

Intended use: Tactical / Collection

Type of production: Artisan
Production Country: Italy
Blade: Steel D2
Blade treatment: Bronze Raw
Handle: micarta
Blade length: 200 mm.
Blade thickness: 6.3 mm.
Overall length: 347 mm.
Balance: on guard branch
Weight: 510g.
Sheath: Hand-crafted Kydex thermoformed
Packaging: -
Notes: each knife is unique as it is handmade, there may therefore be slight differences / inaccuracies with respect to the photographed model, also with regard to the blade and handle colors.

The Dimorphodon is a pure cutting instrument, is the evolution of a modern twist of the classic American frontier knife.

Intended use: Tactical / Collection

Type of production: Artisan
Production Country: Italy
Blade: Steel D2
Blade treatment: Raw Finish
Handle: micarta
Blade length: 200 mm.
Blade thickness: 6.5 mm.
Overall length: 347 mm.
Balance: on guard branch
Weight: 595g.
Sheath: Hand-crafted Kydex thermoformed
Packaging: -
Notes: each knife is unique as it is handmade, there may therefore be slight differences / inaccuracies with respect to the photographed model, also with regard to the blade and handle colors.

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length : 235mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 390mm .
Thick when closed: -
Balancing : -
Weight: 465g .
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by hand

Kukri Artisan - Panawal horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheath

Kukri Artisan - Dhankute 11 "horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by hand

Type of production: Artisan
Blade production: Italy
Blade: D2 steel at 59 / 60HRC
Blade Treatment: Raw Finish
Manicure: Micarta Brown
Blade Length: 200mm.
Blade thickness: 6.3mm.
Total length: 347mm.
Balance: backward
Weight: 585g.
Sheath: in Kydex, thermoformed, with a Tek-Lok attachment
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed product.

Takeshi Saji was born in 1948 in Takefu (prefecture of Fukui), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji Steel products (especially damask) with which he made various models of traditional Japanese knives. The choice of materials for finishes (mostly natural), the essential lines - evocative use - and the color combinations of rare impact make his accomplishments unique and unmistakable in the panorama of the cutlery world and at home, have earned him the prestigious Master title.

Intended Use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Forged by hand, damask laminate with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: Tsuka-ito (plot typical of Japanese Katana) black cotton
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 340mm.
Thick when closed: -
Balancing: Advanced
Weight: 510g.
Closing: -
Clip: -
Sheath: Painted wood with leather belt loop
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji

Intended use: Collection / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Satin
Handle: Micarta
Blade length: 190mm.
Blade thickness: 8mm.
Length closed: -
Overall length: 310mm.
Thick when closed: -
Balancing: -
Weight: 578g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Gift Box hard drive with logos Boker Magnum Collection 2014
Note: Specimen limited edition, made in 1999 pieces individually numbered sequentially. Design by Dennis Friedly

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Black Idroglider
Handle: Forprene
Blade length: 180mm.
Blade thickness: 6.5mm.
Length closed: -
Overall length: 310mm.
Thick when closed: -
Balancing: Advanced to 2.5cm. the branch of guard
Weight: 352g.
Closure: -
Clip: -
Sheath: Nylon compatible M.O.L.L.E.
Packaging: cardboard box with Fox logos
Notes: Survival Kit in aluminum box sealed, with its MOLLE compatible nylon sheath

The survival kit contains:
* Container for water
* Nylon strap
* Mini Compass
* candle
* Flint
* Saw wire
* Fishing kit
* Multi-tool
* matches
* Needle and thread kit
* blade
* Emergency whistle
* Copper wire
* SOS mirror
* pencil

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Takeshi Saji - Mikatsuki 180 Black - Handmade Knife

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Black Paracord
Blade length: 205mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length : 285mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 420mm .
Thick when closed: -
Balancing : -
Weight: 490g .
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Destinazione d'uso: Escursionismo/Heavy Duty

Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 355mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 492mm.
Bilanciatura: avanzata
Peso: 575g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken Onion

Intended use: Collection / Sports

Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel
Treatment Blade: double glazing horizontal and vertical
Handle material: Micarta
Blade length: 204mm.
Blade thickness: 6.4mm.
Length closed: -
Total length: 343mm.
Thick when closed: -
Balance: -
Weight: 428g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Gift Box hard drive with logos Boker Magnum Collection 2013
Notes: Specimen limited edition, made in 1999 pieces individually numbered sequentially. Design by Scott McGhee

United - GH5027 Hibben Legacy Bowie knife -

Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle material: Micarta
Blade length: 145mm.
Blade thickness: 5mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 348g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben and Wesley Hibben