Guaranteed excellence: only the best brands

NITECORE introduces the new high-performance rechargeable flashlight with AA batteries, the MT2A Pro, the latest addition to the MT series. Thanks to the UHi 20 LED, it can achieve higher brightness and extended range with superior ease of use.

Traditionally, AA flashlights were known for their limited brightness and range, disappointing many users. However, with the UHi 20 LED, the MT2A Pro increases brightness to a staggering 1,000 lumens, a 190% leap from its predecessor, and offers a range of 255 meters, ideal for everyday carry, emergency lighting, outdoor work, and more.

The MT2A Pro comes standard with a rechargeable lithium battery NL1416R with a capacity of 1,600mAh, a continuous discharge current of 5A, and a USB-C charging port. As an additional feature, the flashlight also works with AA batteries, whether alkaline, lithium, or rechargeable, ensuring user convenience in any outdoor scenario. It is suitable for concealed carry with a tube diameter of 17.2mm (0.68") and weighs only 87.6g (3.45 oz) (excluding the clip). The body is precision-machined with CNC processing and features non-slip knurling to ensure a secure grip even with sweaty or wet hands or while wearing gloves.

The MT2A Pro is easy to use with a single rear switch for operation. The U-shaped rear cap is designed to prevent accidental activation with the ability to stand upright. Impressively, it has an IP68 rating for dust and water resistance and can withstand drops from 1 meter.

Powers and durations certified in the laboratory according to ANSI/NEMA FL1 standards using 2x AA 1.2V 2400mAh - under different usage conditions or using different batteries, data may vary.

LED: UHi 20 LED with a lifespan of 50,000 hours
Operating Modes: 3 brightness levels
Powers and Durations with NL1416R battery: 1000 Lumens (1.30h) -> 300 Lumens (2 hrs 45) -> 50 Lumens (20h)
Powers and Durations with 2 AA batteries: 500 Lumens (2h) -> 60 Lumens (11h)
Peak Power: 16500 candela
Maximum Illumination Distance: 255m
Ignition Method: Rear rubber button
Light Selection Method: With the flashlight head unscrewed, turning off and on the rear button
Head: Aircraft-grade aluminum
Body: Aircraft-grade aluminum
Finish: Anodized, Type III
Lens: Ultra-transparent hardened glass with anti-reflective coating
Batteries: Uses NL1416R and 2x AA disposable/rechargeable batteries of 1.2/1.5V
Measurements: 142.8 mm (L) - 19.7 mm (D body) - 2.25 cm (D head)
Weight: 40g - batteries excluded
Accessories: Wrist lanyard, spare o-rings, rubber button, tactical ring
Waterproofing: According to IPX-8 standard, submersible up to 2m depth for 30min
Impact Resistance: Resists drops from a height of 1.5m

BATTERY INCLUDED NL1416R

Introducing the NITECORE SRT7i, the latest advancement in the Tactical SmartRing Series. This flagship model represents a breakthrough in the field of tactical flashlights, being equipped with the 4th generation of the Smart Switch, which allows a twist and a push for one-handed control of mode switching and stepless brightness adjustment. This feature makes it particularly suitable for tactical use and immediate response to various situations.

KEY FEATURES:
* Dual tail switches allow for intuitive operation, specifically tailored for law enforcement, hunting and tactical applications.
* Fourth generation of SSR (Smart Selector Ring) technology to quickly and smoothly select brightness levels and operating modes
* Maximum peak beam intensity of 87,500cd and maximum range of 580 meters with maximum autonomy of 800 hours
* STROBE READY™ technology to allow quick access to STROBE mode (patent no. ZL201320545349.4)
* Li-ion battery intelligent charging circuit via USB-C port
* NITECORE 21700i Li-ion battery included (NL2150HPi 5,000mAh)
* Built-in Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
* Break glass on silicon nitride ceramic torch head
* Constructed of aircraft grade aluminum alloy with HA III military grade hard anodized finish
* Waterproof and dustproof grade according to IP68 standard (2 meters submersion) and shock resistant up to 2 meters

TECHNICAL SPECIFICATIONS:

Led: 1x SFT-70 high performance LED, with a life cycle of 50,000 hours
Operating modes: adjustable light output, between 0.1 to 3000 lumens and 1 strobe, electronically regulated
Powers and Durations: 3000 Lumens (3.15h) -> LOW 100 Lumens -> ULTRA LOW 0.1 Lumens (800h) -> Strobe 3000 Lumens
Peak power: 87500 candles
Maximum lighting distance: 580m.
Power-on Method: Back Button and StrobeReady Button
Luminous dial method: Smart Dial Ring and double buttons
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: Ultra clear hardened glass with anti-reflection treatment
Batteries: (included): 1x 21700 3.6V 18W NL2150HPi - also compatible with 2x CR123 3.0/3.6/3.7V using included adapter
Measurements: 16.3cm (L) - 2.54cm (D shaft) - 4.0cm (D head) - 3.1cm (D shank)
Weight: 175g. without batteries
Accessories: NITECORE 21700i Rechargeable Li-ion Battery (NL2150HPi 5,000mAh), CR123 Battery Adapter, Holster, Clip, Lanyard, Spare O-ring, USB-C Charging Cable
Waterproof: as per IP68 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands drops from 2m in height

The LR40 is designed with retro style, which can be used as a camping lantern, ambient light, auxiliary light or decorative light.

The LR40 is available with 3 light sources to produce 360° omni-directional lighting with a maximum output of 100 lumens. In addition to the natural white light, it can also offer the warm light provided by the tungsten filament LED, while the SOS red light can be activated to alert rescuers in an emergency.

The knob switch can be used to turn on/off the light and adjust the brightness steplessly. Built-in 4,000mAh Li-ion battery, it can provide a maximum working time of 65 hours, a night companion for 8 nights. Available with USB-C input and USB-A output, it can be used as a power supply.

In addition, there are multiple ways to use the LR40: place it, hold it or hang it in the tent while the handle features a convex design for more stable hanging. Furthermore, the LR40 has a premium and reliable construction. The ABS plastic housing is durable and impact resistant.

Hot light
Min: 15 lumens - 45 hours
Max: 80 lumens - 15 hours

White light
Min: 15 lumens - 38 hours
Max: 50 lumens - 10 hours

Warm + white light
Min: 10 lumens - 65 hours
Max: 100 lumens - 8 hours

Red light (SOS flashing signal)
10 lumens

Dimensions
Height: 117mm / 4.61"
Width: 96mm / 3.78"
Weight: 222 grams / 7.83 oz
Construction Material: APS Plastic and metal
Switch: Rotating dial above the light
Features Rechargeable: yes
Special Modes: Red SOS
Maximum output: 100 lumens
Battery Included: Built-in Li-ion

KEY FEATURES:

- Dual-beam, ultra-long distance LEP (laser) laser flashlight.
- Features spotlight and projector with dual lens system to provide a maximum output of 3,000 lumens
- The spotlight uses a class 1 LEP laser light with a maximum output of 410 lumens
- The spotlight uses 6 CREE XP-G3 LEDs with a maximum output of 3,000 lumens.
- Maximum peak beam intensity of 678,000cd and maximum range of 1,650 meters
- Powered by a 21700 i Series battery, but compatible with CR123 batteries, for up to 60 hours of continuous battery life
- Real-time multifunctional OLED display for brightness, range, battery voltage, autonomy, etc.
- Intelligent lithium-ion battery charging circuit, with USB-C charging port
- Highly efficient constant current circuit
- Built-in advanced temperature regulation (ATR) module (Patent No. ZL201510534543.6)
- NITECORE 21700i lithium-ion battery (NL2150HPi 5,000mAh) and RSW2i remote switch (part of cable) included
- Optical lenses with scratch-resistant coating on both sides
- Constructed of aircraft aluminum alloy
- Hardened, anodized, military-grade HA III finish
- Classified to meet IP68 waterproofing standards (2-meter submersion)
- Shock resistance to drops of up to 1 meter

 Laboratory-certified power and lifetime by ANSI/NEMA FL1 standards using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary





LEDs: 6 x CREE XP-G3 LEDs + 1x Class 1 LEP laser, with life cycles of more than 50,000 hours
Operating Modes: 3 operating modes (Flood, Spot and Mix) for a total of 13 different electronically regulated light intensities
Powers and Durations FLOOD: 3000 Lumens (45min.) -> 1000 Lumens (2h.) -> 300 Lumens (6h.) -> 70 Lumens (28h.) -> 10 Lumens (60h.)Powers and Durations SPOT: 410 Lumens (2h. and 15min. ) -> 200 Lumens (3h.) -> 130 Lumens (4h. and 30min.) -> 65 Lumens (8h.) -> 25 Lumens (12h.) MIX Powers and Durations: 3000 lumens (45min.) -> 420 Lumens (2h. and 45min.) -> 130 Lumens (6h.)
Peak power: 678000 candles
Maximum lighting distance: 1650m.
Lighting Method: Rear Button with "Momentary On" system for light signals or by remote control
Light selection method: With the flashlight on, pressing the front "Mode" button or via remote control 
Head: aircraft aluminum 
Body: aircraft aluminum
Finish: anodized, Type III
Lens: optical, with scratch-resistant coating
Batteries: works with a rechargeable 21700 rechargeable "i-generation" battery (NL2150HPi, 5,000mAh) included in the package. If needed, it can also work with 2x CR123 3.0V but without being able to use the Turbo and High powers
Measurements: 18.6cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 296.6g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, RSW2i remote control, USB charging cable, CR123 battery reducer
Water resistance: as per IPX-8 standard, submersible to 2m depth for 30min.
Sheath: cordura, belt-mounted, with magnetic closure
Impact resistance: withstands falls from 1m height




Nitecore Italy warranty: flashlight guaranteed 2 years - Battery guaranteed 12 months

Flashlight designed for operational use (law enforcement, security institutions, patrol vehicles) and abitatibo equipped with magnetic induction charging or via USB-C cable - Comes with a base of support charging, a wall mount charging, a USB cable and a car socket for cigarette lighter so you can recharge in any situation.

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Strobe, S.O.S. and Beacon Light
Powers and Times: 1000 Lumens (2.15h) -> 420 Lumens (5h) -> 200 Lumens (11h and 30min.) -> 50 Lumens (38h.) -> 1 Lumen (1200h.) -> Strobe -> Beacon -> SOS
Peak power: 67700 candles
Maximum lighting distance: 520m.
Lighting Method: Front Power Button
Light selection method: Front light selection button
Head and body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: included 1x rechargeable battery NL2150DW 3.7V 5000mAh; not compatible with different types of batteries
Measurements: 15.9cm (L) - 4.0cm (D barrel) - 4.0cm (D head)
Weight: 211g. - excluding batteries
Accessories: magnetic induction charging base - magnetic induction wall charging station - USB cable - cigarette lighter cable - mains transformer - spare o-ring - wrist strap
Waterproof: as per IP68 standard, submersible to 2m depth for 30min.
Impact resistance: it resists falls from 1m height

Power and duration certified in laboratory by standard ANSI/PLATO FL 1-2019 using 1x 21700 3.7V 5000mAh - under different conditions of use data may vary

WHY CHOOSE IT:

Hunting / scouting use - Remarkable illumination depth 618m - Convenient charging system integrated in the battery - High autonomy thanks to the new 5000 mAh 21700 battery - Practicality and immediacy of the light selection controls.

KEY FEATURES:

* Italian Guarantee Nitecore Italy: Torch guaranteed 5 years - Battery guaranteed 12 months
* Charging system integrated in the Li-ion battery via Micro-USB port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Use a Cree XP-L HI V3 for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with anodized military specifications
* IP68 waterproof and submersible (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7 3400mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically adjusted + Strobo, S.O.S. and Beacon
Power and Durability: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Peak power: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear Button
Bright selection method: Front Button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: 21700 with micro-usb direct charging included in the package - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head)
Weight: 158g. - batteries excluded
Accessories: clip, wrist strap, belt cordura sheath, spare o-ring, anti-roll ring
Waterproof: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1.5m in height

KEY FEATURES
* Uses 4 x CREE XP-G3 S3 LEDs with a maximum output power of 2,700 lumens
* Light and robust torch body with CNC machining, with excellent heat dissipation capabilities
* Uses a micro-blasted reflective parabola to guarantee a uniform and diffused light
* Maximum light intensity of 4,500cd and maximum range of 134 meters
* Powered by a high-capacity 21700 Li-ion battery that is compatible with both 18650 and CR123 batteries to allow constant light up to 1,200 hours
* A single power and selection button that controls 5 brightness levels and 3 special modes
* Integrated charging circuits for Li-ion batteries via Micro-USB port
* NITECORE 21700 Li-ion rechargeable battery (NL2140HP 4,000mAh) included
* STROBO mode constantly changes frequency randomly, to maximize disorientation effects * Integrated potentiometer, with indicator light to indicate the remaining battery charge (Patent N ° ZL201220057767.4)
* The integrated potentiometer can also indicate the residual voltage of the battery inserted, with a minimum voltage deviation (± 0.1V)
* Wide 100 ° lighting angle, designed specifically for hiking activities
* ATR (Advanced Temperature Regulation) technology for temperature regulation (Patent N ° ZL201510534543.6)
* Elastic front band included, light and breathable
* Electronic protection against battery polarity reversal
* Built in solid aeronautical aluminum alloy
* Robust HAIII type anodization with military specifications
* Immersible as per IPX8 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height
* Flat, magnetic rear shank, to keep the torch standing or anchored to metal surfaces

TECHNICAL DATA:
LED: 4x Cree XP-G3 S3 with 50,000 hour life cycle
Output 5 constant light outputs, digitally regulated + 3 special modes
1 lumens (1200h.) -> 40 lumens (52h.) -> 270 lumens (8h. And 15min.) -> 800 lumens (3h.) -> 2700 lumens (45min.) + Strobe, Beacon and SOS
Capacity: up to 134mt.
Peak power: 4500 candles
Battery (included): 1x IMR 21700 rechargeable (NL2140HP 3.6V, 14.4Wh, discharge 15A); if necessary it can also work with 1x 18650 Li-Ion 3.7V or 2x CR123 3.0V without being able to reach 2700 lumens of power
Torch size: 128.2x26x28.3mm.
Weight: 100g (only torch, without batteries, elastic band and frontal support)
Lens: in micro-blasted hardened glass
Body: in aeronautical aluminum
Finish: anodized, Type III
Belt: elastic, adjustable in diameter and in height, with silicone coupling
Notes: water resistant as per standard IP68, submersible at 2mt. of depth for 30min. - Magnetic rear cap to hook it independently to any metal surface.
Included accessories: USB charging cable, clip, elastic front band, front support, wrist strap, spare o-ring

HUNTING KIT

the set includes:

- Nitecore NEW P30 torch

- RSW3 remote connection

- Magnetic attack

Technical data of the torch

KEY FEATURES:

* Nitecore Italia Italian Guarantee: Torch guaranteed for 5 years - Battery guaranteed for 12 months
* Charging system integrated in the Li-ion batteries via USB Type C port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Uses a Cree XP-L HI V3 LED for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 21700 3.6V 5000mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically regulated + Strobe, S.O.S. and Beacon
Powers and Durations: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Power peak: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear button
Light selection method: Front button
Head: aviation aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries: included 1x 21700 with USB Type C direct charging - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head) - 2.72 (D. tail)
Weight: 158g. - batteries excluded
Accessories included: Clip, Wrist strap, Spare O-ring, Spare back button, Adapter for 18650 / CR123 batteries, Sheath
Waterproofing: as per IPX-8 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1.5m in height