collini cutlery

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: Nylon, M.O.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence

For this new collaboration between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we have chosen the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the 5 mm Sanmai V-Toku2 steel produced by the Japanese Takefu Steel instead of the Niolox used in the standard model.

Specifically, the central plate is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to guarantee not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge-holding capacity together with easy resharpening and maintenance. At the same time, the blade has a remarkable resistance to corrosion and an important increase in resilience due to the extreme steel type and rolled structure.

Translated with www.DeepL.com/Translator (free version)

Marker training knife, ideal tool for training in the various personal defense disciplines, military training or to be used for soft air.

Thanks to the marker placed on the edge, at the tip and for 2 cm on the back of the blade, it is possible to mark the affected area with extreme precision.

Intended use: training and sports use

Type of production: Industrial
Country of production: Italy
Materials: 15% glass fiber reinforced Nylon plastic material
Blade length: 90mm.
Blade thickness: 8mm.
Total length: 225mm.
Weight: 120g.
Sheath: 15% glass fiber reinforced Nylon plastic with belt clip and possibility of 360° rotation
Packaging: knife, sheath, screwdriver, ink refill, interchangeable plastic blade, 2 fiber blades for marker use
Notes: Design by Roberto Risicato

Specifications:

* autonomy of one recharge up to 400 cuts
* 1.5 mm thick stainless steel insert to give rigidity and weight
* custom logo
* red ink
* washable non-toxic and anti-allergenic ink
* red ink

* serrated blade to distinguish
- threat - - - - - -
- assault -----------

* 15% glass fiber reinforced Nylon plastic material

* interchangeable blade
- fiber for marker use
- plastic

For multiple purchases the training knife can be customized with logos

Intended use: Sports / Excursion

Type of production: Industrial
Country of production: Italy
Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade treatment: Micro shot peening
Handle: Black Jute Micarta with micro-blasted steel Bolsters
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 231mm.
Weight: 241g.
Sheath: in leather, with loops for horizontal port
Packaging: cardboard box with Fox logos
Notes: Design by Reichart Markus

Japanese steel blends with Italian excellence

For this 2022 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 103MB Outdoor model designed by Reichart Markus. Only 18 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago were made, using for this edition the Japanese V-Toku2 steel in Sanmai 5mm produced by the Japanese Takefu Steel instead of the Niolox used in the series model.

Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee, in addition to a beautiful aesthetic effect, a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

THE BRAND
Exclusive collaboration between Coltelleria Collini and Extrema Ratio marketed under the brand KNIVES.IT. 

TECHNICAL DATA SHEET
Intended Use: Collection / Tactical / Neck knife
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade finish: Black PVD cat. MIL-C-13924
Handle: Stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 5.5mm.
Total lenght: 166mm.
Weight: 86g.
Sheath: optional (available separately) in Kydex, handcrafted by the Italian Knife Maker Simone Tonolli.
Package: cardboard box with Extrema Ratio logos
Notes: knife created and manufactured by Extrema Ratio - each knife is numbered - Design by LoTactical

HISTORY
The Tengu takes its name from a mythical creature of Japanese folklore that is represented with both human and raven features, they had the reputation of being great warriors and legends say that some founders of martial arts were trained by them.

- It is designed to be used in many different grips, but is especially effective in the reverse grip.
- Designed to be carried in a variety of ways, whether as a neck knife, under shirt, clipped in a pocket or around the waist using optional systems such as Ulti-Clip or Tek-Lok or various M.O.L.L.E. type attachments.
- With its thickness of 5.5 mm. is extremely robust and thanks to the shape of the handle is comfortable even by those with large hands or those who want to use it with tactical gloves.
- The blade is compact, robust and very functional for both precision cutting and hard materials thanks to the serrated part on the back. The tanto-shaped tip is very robust and optimal for engraving work.

Project born with the brand of Collini KNIVES.IT cutlery

Custom Kydex sheath, made by Simone Tonolli, designed as an additional replacement for the Tengu knife

Type of production: Custom
Country of production: Italy
Material: thermoformed Kydex
Type of sheath: in "taco" format, with 8 steel rivets, designed for concealed carry or deep carry
Length: 165mm.
Width: 43mm.
Thickness: 8mm.
Weight: 25g.
Packaging: -
Notes: clip or coupling system not present / not supplied, sold separately, compatible with systems such as Ulti-Clip or M.O.L.L.E.
Compatibility: compatible only with the TENGU model by Coltelleria Collini, Knives.it, created in collaboration with Extrema Ratio

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: Carbon fiber with HDL copper "Snake Skin" inserts
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 115g.
Closure: Fingers Safe Opening System
Clip: Titanium, billet, with Black PVD finish
Packaging: cardboard box, drawer, with Fox Knives logos - Leather sheath, hydroformed, for belt
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: Titanium with Black PVD finish
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 140g.
Closure: Fingers Safe Opening System
Clip: Titanium, billet, with Black PVD finish
Packaging: cardboard box, drawer, with Fox Knives logos - Leather sheath, hydroformed, for belt
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: G10
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 106g.
Closure: Fingers Safe Opening System
Clip: In stainless steel, flush
Packaging: box with Fox Knives logos, Nylon sheath with zip
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

Tryceratops model .:

Use: Tactical / Utility

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: set back
Weight: 188g.
Sheath: in kydex black
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All Round

Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: set back
Weight: 229g.
Sheath: in Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive piece

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Col Moschin model: for this First Production Run a run of 11 pieces was produced, numbered from 1 to 11.

Special purpose cutting knife, specially developed for the 9th Col Moschin Parachute Assault Regiment, elite unit of the Folgore brigade.

Use: tactical, sports, hiking, collection

Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 160mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 265g.
Sheath: modular tactical, from thigh or belt, in Nylon
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel
Invia commenti
Cronologia
Salvate
Community

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Col Moschin Compact model: for this First Production Run a run of 10 pieces numbered from 1 to 10 was created.

The lethality of the COL MOSCHIN knife in compact version. Supplied with rigid belt sheath and BELT-CLIP. The rigid sleeve can be positioned horizontally, vertically or in a 45 ° inclined position

Use: tactical, sports, hiking, collection

Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 110mm.
Blade thickness: 6.5mm.
Total length: 212mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 209g.
Sheath: ABS with multi-position Tek-Lok attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a thin surface of oil.

As in the ancient Japanese Samurai swords.

Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

RAPTOR model:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

URO model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: backward
Weight: 436g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

URO model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: backward
Weight: 436g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

URO model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: backward
Weight: 436g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

FULCRUM C model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.

FULCRUM C is the compact version of FULCRUM, it maintains all the characteristics of solidity and robustness and, thanks to the reduced dimensions of the blade (only 110 mm) and the handle, it is easily portable and concealable. The rigid sheath can be positioned horizontally, vertically or in a 45 ° inclined position. The only safety of the sheath is automatic with extraction and re-insertion by pressure, this detail makes it an intuitive and extremely fast tool, particularly suitable for emergency use and for personal defense.

Use: backup knife
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade thickness: 6.3 mm.
Blade length: 90 mm.
Total length: 210 mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 210g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

SHRAPNEL OG model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.

SHRAPNEL OG is a truly multi-purpose "back-up", with strong combat attitudes. The leaf blade is characterized by a wide flat winding, with a narrow sharpening angle which makes it particularly sharp. The rigid sheath can be positioned horizontally, vertically or inclined at 45 °. The SHRAPNEL OG is produced without the top guard.

Use: tactical, sports, hiking, collection

Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Handle: forprene
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 190g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.

In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.

In collaboration with Tactical Wander we decided to bring them light utility, the Lynx model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Application: Light Utility / All Round

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Lama treatment: Satin
Handle: Micarta
Blade length: 120mm.
Blade thickness: 6.8mm.
Total length: 245mm.
Balancing: set back
Weight: 366g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.

Folding knife made upon specific requests of the department of the Italian Army 185 ° RAO ( Target Acquisition Regiment ) and is now included the eponymous department . The knife supplied differs from the calendar for the total lack of writings or logos on the blade.

Limited Edition RAO model characterized by a satin blade in Japanese rolled steel produced by Takefu Steel. to the central plate and the 420J2 (56 HRC) In the specific CoS it is used to 61,5HRC (Cobalt Special deemed superior mechanically by 25% compared to the already appreciated VG10) for the two side plates, in order to have a very high capacity cutting but at the same time a remarkable resilience and resistance to oxidation.
folding knife made upon specific requests of the Italian Department of the Army 185th RAO (Regiment Acquisition Objectives) and currently supplied to the homonymous department. The knife supplied differs from that only civil to the total lack of written or logos on the blade.

Intended Use: Military / Tactical

Type of production: Industrial
Production Lama: Italy
Blade: (San Mai) Japanese-rolled stainless steel with sharp CoS to 61,5HRC in cryogenic tempering
Lama Treatment: Testudo
Handle material: anticorodal 4.5mm
Blade length: 118mm.
Blade Thickness: 6.3mm.
Length closed: 142
Overall length: 261mm.
Balancing: -
Weight: 335g.
Closure: front modified lock - threaded safety pin
Clip: -
Sheath: tactical nylon by Vega with M.O.L.L.E. attacks suitable for both the closed knife that open - color BLACK
Notes: sharpening the included Diamond

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

In collaboration with WANDER TACTICAL we decided to bring their tactical model URO in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Occupation: Tactical / Utility

Type of production: Artisan
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.8mm.
Overall length: 295mm.
Balancing: backward
Weight: 475g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with Wander Tactical we decided to propose one of their most iconic knives, the Tryceratops model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Application: outdoor / hunting

Type of production: handmade
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.8mm.
Overall length: 130mm.
Balancing: backward
Weight: 210g.
Sheath: Kydex, thermoformed, with Tek-Lok system
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

For this new exclusive collaboration with Extrema Ratio we decided to propose a best seller in the world of cutlery, the Shrapnel model. It's a satin blade version but the most important thing is that has been used, for the first time in Italy, the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used the CoS (Cobalt Special, considered mechanically superior by 25% compared to the already appreciated VG10) for the central plate and the 420J2 (55 HRC) for the two side plates, in order to have a high cutting capacity, but at the the same time a remarkable resilience and resistance to oxidation.

A First Production Run of 30 pieces has been made.

SHRAPNEL OG is a truly versatile “back up” knife with marked combat qualities. Its leaf-shaped blade is flat ground at a characteristically low angle to a wide, extraordinarily sharp edge. The included hard sheath can be worn vertically, horizontally or obliquely (at a 45° angle). Tthe SHRAPNEL OG hilt design does not include a guard.

Use: tactical , sports , hiking , collection
Blade: Full , Japanese- rolled stainless steel ( San Mai) with sharp CoS to 61,7HRC in cryogenic tempering
Handle: Forprene
Blade length: 90mm.
Blade Thickness: 6.5 mm.
Overall length: 210mm.
Balancing: back to 0.5cm . by guard branch
Weight: 214g.
Sheath: ABS with Tek - Lok multi attack
Notes: cardboard box with Extremaratio logos and certificate

Clad Metal
It is a composite metal partly or entirely diffusion bonded together of different kinds of metals.

Metal composition shows higher performance which respective materials alone do not possess and the performance complements opposite characteristics of each material, that is "compound characteristics"

Clad Effect on Cutleries

Toughness
Like Japanese swords, clad metal is hard to break or bend, thanks to the toughness as the hard steel part is clad with soft steels.
Easy to work on
Cladded structure is easy to apply on such works as forging, grinding, sharpening or polishing to make a sharp blade.

Improved corrosion resistance　　　　
Proper material combination generates electrical potential difference and it enhances the corrosion resistance on blade edge.

Better and long lasting sharpness
Steel after forging pressure makes the microscopic structure denser and improves the sharpness and ensures long lasting performance.

Resource saving
As high class steel is used only for necessary part, it is perfectly cost effective..

Easy distortion correction
As the steel is bonded with soft steel materials, its blade is hard to break and the distortion correction is easy.

Easy drilling and welding after heat treatment
Though the steel gets harder after heat treatment, the soft steel never loses its softness, enabling the material to be drilled or welded.

Design improvement
Laminated patterns or Damascus patterns appear from basis materials which are bonded with different kinds of metals.

This knife is a Collini Cutlery exclusive edition, the one and only Karambit blade ever made by Extrema Ratio and you will not be able to find it in other stores - This is a very small worldwide limited edition of 50 serialized pieces.

Blade: 58HRC N690Co Testudo Stainless Steel
Country of production: Italy
Handles: Black satin anticorodal
Blade Lenght: 90mm.
Blade Thinckness: 4mm.
Total Lenght: 205mm.
Hole Diameter: 22mm
Weight: 152g.
Sheath: Kydex with Tek-Lok
Notes: Worldwide limited edition, only 50pcs each serialized

ExtremaRatio - SKAR - Karambit Collector's Edition - knife

SKAR COLLECTOR'S EDITION

Available in only 10 numbered copies (from 1 to 5 in the version black blade and 1 to 5 in the blade clear version), this edition of the Skar Extremaratio is sold in an elegant box in polymers with the version Skar training aluminum.

Intended Use: collection / CQB

Type of production: Industrial, Limited
Blade: stainless steel N690
Treatment Blade: Stonewashed
Production Lama: Italy
Handle: Anticorodal removable grips
Blade length: 90mm.
Blade Thickness: 4mm.
Overall length: 205mm.
Hole diameter: 22mm
Balancing: back, 2 cm from the branch guard
Weight: 152g.
Sheath: Kydex, thermoformed, connection type Tek-Lok
Notes: Limited edition and numbered with certificate, in only 5 pieces
Housing: plastic, with logos ExtremaRatio

Faithful implementation of the 1/1 scale SKAR. Entirely anodized aircraft aluminum, this Karambit is made by Extrema Ratio in collaboration with Cutlery Collini Busto Arsizio.

Free tip and sharp, this knife offers a realistic feeling and maximum safety during training and practice of martial arts that require the use karambit.

Intended Use: Training
Production: Italy
Lama: Aeronautical Aluminum 6061 T6
Treatment: Anodizing
Handle: series comes the paracord to assemble; select the drop down menu under the favorite color! E 'can also purchase the handle in aluminum that are mounted on steel version SKAR.
Blade length: 90mm.
Blade Thickness: 4mm.
Overall length: 205mm.
Hole diameter: 22mm
Weight: 34g.

This knife is a Collini Cutlery exclusive edition, the one and only Karambit blade ever made by Extrema Ratio and you will not be able to find it in other stores - This is a very small worldwide limited edition of 50 serialized pieces.

Blade: 58HRC N690Co Testudo Stainless Steel
Country of production: Italy
Handles: Black satin anticorodal
Blade Lenght: 90mm.
Blade Thinckness: 4mm.
Total Lenght: 205mm.
Hole Diameter: 22mm
Weight: 152g.
Sheath: Kydex with Tek-Lok
Notes: Worldwide limited edition, only 50pcs each serialized

This knife is a Collini Cutlery exclusive edition, the one and only Karambit blade ever made by Extrema Ratio and you will not be able to find it in other stores - This is a very small worldwide limited edition of 50 serialized pieces.

Blade: 58HRC N690Co Stonewashed Stainless Steel
Country of production: Italy
Handles: Black satin anticorodal
Blade Lenght: 90mm.
Blade Thinckness: 4mm.
Total Lenght: 205mm.
Hole Diameter: 22mm
Weight: 152g.
Sheath: Kydex with Tek-Lok
Notes: Worldwide limited edition, only 50pcs each serialized