bing

bushcraft knives

Shop By
Shopping Options
Brand
  1. Fox Knives 3items
  2. Lion Steel 1item
  3. Approved 1item
  4. Tops Knives 2items
Less
Stock
  1. In Stock 1item
  2. Out of Stock 6items
Rating
  1. 5
    1item
  2. 4
    & up
    2items
  3. 3
    & up
    3items
Set Ascending Direction

7 Items

  1. Tops - CUMA Tak-Ri 3.5 - Tactical Kukri - Green Canvas Micarta - Knife

    The CUMA Tak-Ri 3.5 is not your typical kukri. In fact, you have to understand what a Gurkha Kukri is to see the curve of its blade. The kukri (Devnagari/ खुकुरी), originally spelled khukri or khukuri, is a Nepalese curved knife. It is a traditional weapon of the Nepali people and also a weapon of choice/side arm for all Nepalis, including those serving in various armies around the world, but with the CUMA Tak-Ri we have gone further!

    Once you have the CUMA Tak-Ri in your hands, you will quickly realize that it is "tough to the core." In fact, the Tak-Ri caused such a stir at the 2011 SHOT Show that Lou Ferrigno (the historic "Incredible Hulk") pre-ordered his directly at the TOPS Knives booth.

    Intended Use: Hard Utility / Tactical

    Type of Production: Semi-Industrial
    Country of Manufacture: USA
    Blade: full tang in 1095 58/60HRC steel
    Blade Finish: Coyote Tan Coatung
    Handle: Canvas Micarta
    Blade Length: 178mm.
    Blade thickness: 4.9mm.
    Total length: 343mm.
    Weight: 460g.
    Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
    Packaging: transparent plastic bag
    Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticity

    TPCUMATK35
    €253.28
    Only 1 left
    Only 1 left
    Rating:
    60%
    3
  2. Fox - Rimor Special Edition - V-TOKU2 SanMai Steel - OD Green - FX-9CM07OD-CC - knife

    Intended Use: Survival / Utlity / Collection

    Production type: Industrial
    Country of manufacture: Italy
    Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless) outer cheeks
    Blade treatment: Satin finish
    Handle: Forprene
    Blade length: 175mm.
    Blade thickness: 6mm.
    Total length: 300mm.
    Weight: 365g.
    Sheath: nylon, M.O.L.L.E. compatible.
    Packaging: cardboard box with Fox logos
    Notes: -

    Japanese steel merges with Italian excellence.

    For this new collaboration, between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we chose the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the Japanese V-Toku2 steel in 5mm Sanmai produced by the Japanese Takefu Steel instead of the Niolox used in the standard model. 

    Specifically, the central sheet is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to ensure not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge retention along with easy resharpening and maintenance. At the same time, the blade has remarkable corrosion resistance and an important increase in resilience given by the type of extreme steel and laminated structure.

    FX-9CM07OD-CC
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  3. Lionsteel - M3 knife - Green Micarta - Niolox Steel - M3CVG - knife

    The M3 is a small-sized fixed blade knife, useful in any field activity and easily transportable.

    The M3 comes with a satin finish Niolox steel blade. The detachable grips are available in Micarta.

    The M3 is equipped with a handle machined with 3D milling machines to achieve optimal ergonomics. Added to this is the surface texture that makes the grip firmer. The handle screws are in stainless steel with Torx T8 tightening system.

    The M3 is sold together with the Cordura sheath for the version with Micarta handle.

    Type of production: Industrial
    Production Lama: Italy
    Blade: SB1 Niolox 61HRC stainless steel
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Closed Length: -
    Total length: 235mm.
    Thick when closed: -
    Balancing: -
    Weight: 250g.
    Closure: -
    Clip: -
    Sheath: Cordura
    Packaging: Cardboard box with Lion Steel logos
    Note: -

    LS-M3CVG
    €138.52
    Only 0 left
    Only 0 left
    Out of stock
  4. Ontario - RAT 3 Randall's Adventure Training D2 - Full Set - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased.
    * Condition: Like new
    * Commercially available: Discontinued - the company has permanently ceased operations.
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: No
    * Box: Present, new and perfect
    * Scabbard: Present, like new.
    * Manuals, Certificates and Warranties: No
    * Checked and Certified by our in-house laboratory


    Intended Use: hiking / utility

    Production type: Industrial
    Country of manufacture: USA
    Blade: Fulltang, D2 steel with powder finish
    Handle: Micarta
    Blade length: 99mm.
    Blade thickness: 3.5mm.
    Total length: 200mm.
    Balance: backward
    Weight: 157g.
    Sheath: thermoplastic, with TEK-LOK attachment
    Notes: knife like new, withdrawn from private collection

    ONRAT3-CP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  5. Tops - Baja 3.0 - Small Outdoor Knife - Green Canvas Micarta - Knife

    The Baja 3.0 knife is a synthesis of simple design and excellent execution. The 3.0-inch blade can adequately handle a wide variety of tasks, such as building wooden tools, building a fire and shelter, or felling an animal. The 1/8-inch thick 1095 high-carbon steel provides excellent cutting, penetration and edge-holding qualities. The simple handle design, with its Micarta grooves, provides the user with excellent traction in most circumstances.

    Intended Use: Utility

    Production Type: Semi-Industrial
    Country of Production: USA
    Blade: full tang in 1095 58/60HRC steel
    Blade Finish: Coyote Tan Coatung
    Handle: Canvas Micarta
    Blade Length: 76mm.
    Blade thickness: 3.5mm.
    Total length: 158mm.
    Weight: 85g.
    Sheath: leather, belt
    Packaging: transparent plastic bag
    Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticity

    TPBAJA03
    €139.34
    Only 0 left
    Only 0 left
    Out of stock
  6. Fox - Bushman Knife - V-TOKU2 SanMai steel - Special Edition - CO-609OD - knife

    Japanese steel blends with Italian excellence

    For this 2021 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 609OD Bushman model, an excellent bushcraft knife produced by Fox of Maniago, using Japanese V-Toku2 steel in Sanmai. produced by Japanese Takefu Steel instead of the D2 used in the production model.

    Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

    Technical features

    Intended use: bushcraft - outdoor - collection
    Type of production: Industrial
    Production Lama: Italy
    Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
    Blade treatment: satin
    Handle: micarta
    Blade length: 160mm.
    Blade thickness: 5mm.
    Total length: 290mm.
    Thick when closed: -
    Balancing: advanced
    Weight: 369g.


    Sheath: in leather, belt, ambidextrous, for horizontal or vertical carrying
    Packaging: cardboard box with Fox logos
    Bevel: flat with scandi-like sharpening, convex
    Notes: Special and limited edition - since the cutting edge is made of carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

     


    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer life of the cutting edge
    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    FX-609ODCC
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  7. Fox - Parang Bushcraft Jungle Knife - FX-0107153 coltello

    Blade: 58/59HRC N690 Stainless Steel Handle: Forprene Blade Length: 180mm. Blade Thickness: 6mm. Overall Length: 310mm. Weight: 330g. Lock: - Clip: - Sheath: Nylon Notes: Made in Italy - Design by Alfredo Doricchi - Survival Kit included
    FX-0107153
    €184.43
    Only 0 left
    Only 0 left
    Rating:
    92%
    4.6
    Out of stock
Set Ascending Direction

7 Items





ecommerce sicuro