coltelli campeggio sportivi, coltello uso outdoor

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Type of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.

The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.

Intended Use: Sporting/EDC

Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivot

EDC is its home - the world is its home! Reliable, sturdy and biting, the Boker Plus Worldwide 2.0 is a two-handed opening tactical knife whose cosmopolitan features should make it legal to carry in many countries around the world. No blocking system, no quick one-handed opening, no worries: the solid 440C stainless steel drop point blade can be opened comfortably thanks to the generous claw, while the slipjoint system equipped with a powerful spring ensures total stability and safety in use.

The refined black stonewash finish of the blade perfectly matches the ergonomic olive green G10 handle grips adding a tactical touch. The folding knife is cosmopolitan thanks to the various carrying options offered by the lanyard hole and reversible clip. 

Intended Use: EDC

Production type: Industrial
Country of manufacture: China
Blade: 440C stainless steel
Blade treatment: stonewashed
Handle: made of G10, with stonewashed stainless steel inner folders
Blade length: 64mm.
Blade thickness: 2.8mm.
Total length: 155mm.
Weight: 87g.
Closure: SlipJoint
Clip: stonewashed stainless steel, removable and reversible
Sheath: - 
Packaging: cardboard box with Boker Plus logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: EDC / Rescue

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new
* Commercially available Discontinued since 2015
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: USA
Blade: Bohler M390 60/62HRC stainless steel
Blade Finish: Stone Washed
Handle: G10 and Titanium
Blade length: 73.5mm
Blade thickness: 4.15mm.
Length closed: 96.5mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Weight: 156g.
Closure: Frame Lock
Clip: Titanium, machined from billet
Packaging: Cardboard box with Benchmade logos
Notes: Design by Shane Sibert

Ultra-thin, incredibly lightweight and extremely durable, the 748BK-01 Narrows™ pushes the boundaries of EDC style and performance with a futuristic, minimalist design, high-quality materials and hi-tech engineering. The dark variant balances matte and glossy details with matte black DLC titanium grips mixed with a drop-point blade in glossy black M390 DLC. The 748BK-01 uses our AXIS® Torsion mechanism and thrust pads for extremely smooth blade activation. This precision EDC is beyond imagination.

Intended Use: Sporting / EDC

Production Type: Industrial
Country of manufacture: USA
Blade: M390 58/61HRC
Blade treatment: Dual Tone Black DLC
Handle: Titanium 6Al-4V
Blade Length: 87mm.
Blade thickness: 2.03mm.
Length closed: 117mm.
Total length: 203mm.
Thickness when closed: 7.1mm.
Weight: 68g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel with Sapphire Blue PVD treatment
Packaging: Cardboard box with Benchmade logos
Notes: -

Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip; the MAGNACUT drop point blade maximizes the cutting capacity and corrosion resistance of the steel. The VERSO Lock opening mechanism gives this knife maximum efficiency.  Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black PVD
Handle: anodized aluminum with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 123g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les George

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos 
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening system

Intended use: sports/steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: ebony
Blade length: 83mm.
Blade thickness: 2.5mm.
Closed length: 103mm.
Total length: 185mm.
Closed thickness: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: Sports/Hunting

Type of production: Industrial
Blade production: Italy
Blade: 440 stainless steel
Blade Treatment: -
Handle: Olive wood with steel liners
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 220mm.
Closed thickness: 20mm.
Weight: 170g.
Closure: Back Lock
Clips: -
Sheath: in cordura
Packaging: cardboard box with Maserin logos
Note: On the back of the blade, a sharp skinner extends. This skinner, with its curved and sharp shape, is designed to separate the skin from the animal's body with extraordinary ease and precision. Whether it's a deer, bear or smaller prey, this tool proves to be a reliable companion for any hunter.

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Blackwashed OldBlack
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Blackwashed OldBlack
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously purchased and used. 
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by Carryology

Discover Made in USA quality and functionality with the Bel Air. When you open the knife, its smoothness is unmatched thanks to KVT ball bearings and DuraLock technology.

As for cutting, the steel of the MagnaCut blade maintains an exceptional edge, and the "reverse tanto" blade can handle the toughest challenges during daily carry. The BlackWash finish hides scratches from use and complements the aluminum handle grips. The slim profile makes it perfect for easy carrying, thanks in part to the reversible pocket clip.

Intended Use: Sporty

Production type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 62/64HRC steel
Blade treatment: Blackwash
Handle: Aluminum 6061-T6
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 11mm.
Weight: 82g.
Opening: via ambidextrous pins, placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, Teflon-coated stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

Intended Use: Sporting

Type of production: Industrial
Country of Production:Italy
Blade:Steel CPM-MagnaCut 59/61HRC
Blade finish: Black PVD
Handle: 3K carbon fiber with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 105g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les George

The new Vulpis series from Fox Knives wants you to fall in love with Made in Maniago technology and manufacturing innovation with the new small and versatile multi-purpose.

Intended Use: EDC

Type of production: Industrial
Country of manufacture: Italy
Blade: M390 59/60HRC stainless steel
Blade finish: Black Idroglider
Handle: Brass
Blade length: 44mm.
Blade thickness: 2mm.
Length closed: 63m.
Total length: 106mm.
Thickness when closed: 6mm.
Weight: 44g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Vulpis / Fox Knives logos.

In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.

The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.

Type of manufacture: industrial

Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: stainless steel and G10 folders
Blade length: 93mm.
Blade thickness: 3.2mm.
Total length: 218mm.
Weight: 159g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Vaeringi - tungsten carbide backstop - ball bearing opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: stainless steel and G10
Blade length: 85mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Weight: 127g.
Clip: Removable, stainless steel machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Kornel Kiss - ball bearing opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 87mm.
Blade thickness: 3.2mm.
Total length: 200mm.
Weight: 125g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Lorien Arnold - flipper opening system on ball bearings

Intended Use: Sporting/collection

Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and birch root
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening system

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and micarta
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening system

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and "Fat Carbon" carbon fiber
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 139g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: Design by Les George - Numbered and limited edition of 500 pieces - ball bearing opening system

Loose screw? Far from it, because the Magnum Skruva (Swedish: screw) literally has a firm grip on everything. This is mainly due to the solid pivot screw, which forms the resting point for the ball-bearing 440A drop-point blade.

An attractive ricasso and discreet satin finish complete the visual appearance of the blade, while jimpings on the spine of the blade provide additional safety during tough cutting jobs.

The knife opens with the pinball machine; the liner lock closes the blade intuitively and reliably.

The handle is linear and ergonomic with non-slip cheeks made of light and textured G10, which guarantees an optimal grip even in the most adverse conditions.

Type of production: industrial

Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: G10
Blade length: 79mm.
Blade thickness: 2.7mm.
Closed length: 110mm.
Total length: 189mm.
Balancing: -
Weight: 100g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -

Type of production: industrial
Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: Micarta
Blade length: 88mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 201mm.
Balancing: -
Weight: 113g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -

Based on the Skeksis, fantastical creatures that mix characteristics of the bird of prey, reptile and dragon, this Magnum model is presented as an eccentric pocket knife with exceptional value for money. The ball-bearing, beak-shaped blade echoes the shape and efficiency of Skeksis, so that even complex cutting tasks are performed effortlessly.

The knife opens with both a flipper and thumb hole, while the stainless steel linerlock and grooves on the back of the blade provide good safety when working. Green G10 textured handles resemble reptile skin and provide a comfortable grip. Supplied with a lanyard hole and a point up clip.

Type of manufacture: industrial
Blade: 440 56HRC stainless steel
Blade treatment: -
Handle: G10
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Balance: -
Weight: 115g.
Closure: liner lock
Clip: stainless steel
Scabbard: -
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: Sporting

Production Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos 
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos 
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available 
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos. 
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -

With an unmistakable and timeless design, Evoke Alox Limited Edition 2024 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Terra Marrone coloring, it allows you to reconnect with nature! With embossed and anodized aluminum cheeks, it's a really tough knife.

Intended Use: Sporty

Type of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum 
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2024

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in very good condition
* Commercially available handcrafted version no longer commercially available.
* Sharpening: factory sharpened, never resharpened
* Marks on blade: none
* Marks on handle: a few tiny little marks on carbon
* Box: present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Collection

Production type: MidTech
Country of Manufacture: USA (Wampum, Pennsylvania)
Blade: CPM-CruWear 63/64HRC steel
Blade treatment: Stonewashed
Handle: 5mm thick Carbon Fiber with stainless steel top folder
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 220mm.
Weight: 174g.
Closure: Shark-Lock
Clip: stainless steel
Packaging: cardboard box with Demko logos
Notes: previously purchased knife from private collection - rare semi-crafted version (MidTech) personally made by the knife maker in his own workshops in Wampum, discontinued and no longer commercially available

In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.

Intended Use: Sporting / EDC

Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.

Intended Use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium 
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.

Intended Use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium 
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

What began as an attempt to perfect the multi-purpose outdoor lock, has evolved into a practical solution for everyday tasks and chores: the 533SL-07 Mini Bugout is exactly the compact EDC built for everyday carry in style.

Lightweight, slim and sleek, yet incredibly rugged and durable for its size, the 533SL-07 Mini Bugout is a seasonal variant that immediately catches the eye, with an easy-care premium CPM-S30V steel blade, Cerakote Crushed Silver finish and Sage Green outdoor-inspired Grivory-colored grip, with gold-anodized backspacer and thumb stud for a distinctive Benchmade color touch.

Intended Use: Sporty / EDC

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Crushed Silver Cerakote
Handle: Grivory
Blade length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

In the years since the 535 Bugout was launched, this slim, lightweight and durable folder has redefined EDC style and versatility, from the trail to the workplace and amidst all of life's adventures.

The 535-12 Bugout is an instant eye-catcher, made of easy-care premium CPM-S30V stainless steel with a stonewashed finish and powder-colored Grivory handle with backspacer and gold anodized thumb stud for a touch of color and class-the must-have tool in your outdoor kit.

Intended Use: Sporting / EDC

Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Stonewashed
Handle: Grivory
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.

The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.

Welcome to the next chapter of the Zero Legacy!

Intended Use: Sporting

Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens Anso

In the Kwaiken American Tanto, the Oregon knife designer combines elements of Japanese and American styles. The flipper opens the silk-smooth D2 Tanto blade and locks with the reliable linerlock. The Tanto blade features a straight back and a second curved cutting edge at the front that runs straight to the tip-ideal for precise cuts. The exclusive claim is emphasized by the lightweight G10 handle grips, which give the all-black knife a very distinctive and harmonious appearance.

The slim design and exclusive material make the Kwaiken a classy men's knife with a tactical touch. It comes with a high-quality nylon case for storage and a deep, removable carry tip-up clip.

Intended Use: Tactical/Sportsman

Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: black coating
Handle: stainless steel and G10
Blade length: 90mm.
Blade thickness: 3.1mm.
Total length: 212mm.
Weight: 120g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: design by Lucas Burnley - flipper opening system on ball bearings

The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.

The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade finish: stonewash
Handle: G10 and stonewash stainless steel
Blade length: 79mm.
Blade thickness: 3.1mm.
Total length: 180mm.
Weight: 93g.
Clip: removable, stainless steel
Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
Notes: design by Michael Burch

Take it seriously: the Sumo is no joke! This oversized knife is the ultimate in practicality: it's easy to use, opens smoothly and offers an ambidextrous locking system that's easily operated with a simple, reliable pivot, and it's also particularly aesthetically appealing and packed with colorful details and accents.

The red ceramic-treated inner folders give an attention-grabbing pop, while the layered G10 offers great grip and plenty of hand room!

Intended Use: Sporty

Production type: Industrial
Country of manufacture: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Darkwashed
Handle: made of layered G10, with liners and spacers made of red ceramic-treated steel
Blade length: 98mm.
Blade thickness: 3.3mm.
Length closed: 130mm.
Total length: 225mm.
Weight: 145g.
Closure: Pivot Lock (Axis Lock)
Clip: removable and reversible in painted stainless steel
Packaging: cardboard box with Gerber logos
Notes: -

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances.  The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Satin finish
Handle: Dark Matter Carbon Fiber in Green color, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: Natural Canvas Micarta, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (75mm. cutting edge).
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master knife maker Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock."

The handle uses the brand new UltreX SureTouch composite in modified G-10.

SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material. 

The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior) with double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.

The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.

The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.

The Ant Black version utilizes Böhler N690, hardened to 58 HRC for the best balance between edge retention and toughness, a type of steel used by Extrema Ratio for most of its knives.

The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.

Type of production: industrial
Blade: in stainless steel N690 58 HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 70mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Balancing: -
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Sheath: -
Notes:

The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.

The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.

The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.

The Ant is available in 4 versions with two different types of steel, both provided by Böhler, an Austrian company with which Extrema Ratio has been collaborating for over 20 years, using its highly esteemed materials for the production of its blades.

For the Stone Washed M390 version, Extrema Ratio uses Böhler M390 steel, thermally treated to 61 HRC, which, thanks to a powder metallurgy production process, ensures cutting effectiveness, wear resistance, and oxidation resistance over time.

The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.

Type of production: industrial
Blade: in stainless steel M390 61HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 70mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Balancing: -
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Sheath: -
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

Intended Use: EDC / Sporty

Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: Teflon coating
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei Matsuno

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei Matsuno

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei Matsuno

After the France, Amour and Escapade editions, discover the Nature edition!

An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

Perrine Honoré, a French illustrator and muralist, has decided to explore a synthetic, colorful, and naive language somewhere between the abstract and the figurative. Different natural elements appear on the handle of the knife so that everyone can interpret them in their own way. 

The knife has an 8.5-cm stainless steel blade, and the handle is decorated with the sublimation technique.

Intended Use: Collection

Type of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

After the France, Amour and Escapade editions, discover the Nature edition!

An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

Discover pocket knife N°08 by Rommy González, a Chilean artist who decided to highlight mycelium and the fungi it produces. Her drawings were transcribed on the knife's fascinating handle using the sublimation method. The 8.5-cm blade is made of stainless steel.

Intended Use: Collection

Type of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/Collection

Type of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper system

Intended use: Sporting

Production type: Industrial
Country of production: Italy
Blade: Elmax steel at 61HRC
Blade finish: Satin finish
Handle: Stainless steel and Fat Carbon with gold highlights
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 160mm.
Weight: 110g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Design by Bruno Bruna "Graciut"

Intended use: collectible / sporting

Type of production: Industrial
Country of Production: Italy
Blade: Elmax steel at 61HRC
Blade finish: satin-finished
Handle: Made of anodized titanium and Fat Carbon with blue highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: collectible / sporting

Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade treatment:
Handle: In titanium and Fat Carbon with gold highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Winner of the "Most Innovative Imported Design" at the Blade Show in 2023, this knife is designed by Attilio Morotti made in collaboration with Sandrin knives that supplies the tungsten carbide blades that, made through a sophisticated machining process, reach the extraordinary hardness of 71 HRC, yet at the same time maintaining a high twisting capacity and resilience.

Intended Use: Sporting / Collection

Country of manufacture: Italy
Total length: 150mm
Blade length: 80mm
Blade thickness: 1.5 mm
Blade material: polyhedral tungsten carbide 71 HRC hardness
Handle material: forged Fat Carbon fiber
Weight: 78 grams
Pocket clip: -
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Attilio "Atti" Morotti - Blades by Sandrin Knives - Winner at the Blade Show 2023 of "Most Innovative Imported Design"

Intended use: sporting/for table use

Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade finish: -
Handle: fat carbon with green highlights
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thickness when closed: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio "Atti" Morotti

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 122g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S90V (59-61 HRC)
Blade treatment: Satin finish
Handle: Carbon fiber with anodized aluminum spacers
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 215mm.
Weight: 116g.
Closure: Axis
Clip: stainless steel with PVD treatment, removable
Packaging: cardboard box with Benchmade logos