coltelli campeggio sportivi, coltello uso outdoor

Fällkniven AB celebrates its 40th anniversary in the international knife market with The Fällkniven Phantom model, a folding knife that is not only aesthetically appealing but also functional, with well-balanced proportions between handle and blade.

The blade uses advanced Swedish powdered steel (Elmax from Uddeholm), equipped with a convex edge for maximum performance. The handle is made of ironwood harvested in the southwestern United States, known for its density (1.2 kg/dm³) that makes it heavy and strong enough not to float.

The design of the Phantom follows the Scandinavian principle of "Form follows function," favoring clean, classic lines without superfluous details. 

The Phantom comes in a gift box with a multifunctional leather case with a belt clip that can be worn either horizontally or vertically.

Intended use: sports/hunting/utility

Blade: 61/62HRC Elmax stainless steel, satin-finished, with convex sharpening
Handle: stainless steel and desert ironwood
Blade length: 73mm.
Blade thickness: 3mm.
Length when closed: 101mm.
Total length: 174mm.
Weight: 77g.
Locking system: Liner Lock
Sheath: leather, with metal clip
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard case

Roselli's version of the ultimate outdoor knife is now also available in a full tang model with hidden steel (where the blade runs through the entire handle) to give you better support and balance when you use it intensely. All Roselli full tang knives are long-lasting, sturdy and perfect for heavy-duty use.

The design is inspired by traditional carving knives and, thanks to its handy size, can be adapted anywhere. The knife is also effective as a hunting knife and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.

This new full tang knife features a carbon steel blade and a stabilized birch handle, featuring an eyelet hole for strap attachment. Wood stabilization is the process of strengthening the wood so that it no longer reacts to changes in humidity, which cause the wood to shrink or swell.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balancing: -
Weight: 145g.
Closure: -
Clips: -
Sheath: light brown leather
Note: -

Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.

The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.

Intended Use: Sporting/EDC

Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivot

EDC is its home - the world is its home! Reliable, sturdy and biting, the Boker Plus Worldwide 2.0 is a two-handed opening tactical knife whose cosmopolitan features should make it legal to carry in many countries around the world. No blocking system, no quick one-handed opening, no worries: the solid 440C stainless steel drop point blade can be opened comfortably thanks to the generous claw, while the slipjoint system equipped with a powerful spring ensures total stability and safety in use.

The refined black stonewash finish of the blade perfectly matches the ergonomic olive green G10 handle grips adding a tactical touch. The folding knife is cosmopolitan thanks to the various carrying options offered by the lanyard hole and reversible clip. 

Intended Use: EDC

Production type: Industrial
Country of manufacture: China
Blade: 440C stainless steel
Blade treatment: stonewashed
Handle: made of G10, with stonewashed stainless steel inner folders
Blade length: 64mm.
Blade thickness: 2.8mm.
Total length: 155mm.
Weight: 87g.
Closure: SlipJoint
Clip: stonewashed stainless steel, removable and reversible
Sheath: - 
Packaging: cardboard box with Boker Plus logos
Notes: -

Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip; the MAGNACUT drop point blade maximizes the cutting capacity and corrosion resistance of the steel. The VERSO Lock opening mechanism gives this knife maximum efficiency.  Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black PVD
Handle: anodized aluminum with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 123g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les George

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos 
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening system

Intended use: Sports/Hunting

Type of production: Industrial
Blade production: Italy
Blade: 440 stainless steel
Blade Treatment: -
Handle: Olive wood with steel liners
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 220mm.
Closed thickness: 20mm.
Weight: 170g.
Closure: Back Lock
Clips: -
Sheath: in cordura
Packaging: cardboard box with Maserin logos
Note: On the back of the blade, a sharp skinner extends. This skinner, with its curved and sharp shape, is designed to separate the skin from the animal's body with extraordinary ease and precision. Whether it's a deer, bear or smaller prey, this tool proves to be a reliable companion for any hunter.

Intended Use: Sporting

Type of production: Industrial
Country of Production:Italy
Blade:Steel CPM-MagnaCut 59/61HRC
Blade finish: Black PVD
Handle: 3K carbon fiber with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 105g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les George

In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.

The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.

Type of manufacture: industrial

Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 87mm.
Blade thickness: 3.2mm.
Total length: 200mm.
Weight: 125g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Lorien Arnold - flipper opening system on ball bearings

Loose screw? Far from it, because the Magnum Skruva (Swedish: screw) literally has a firm grip on everything. This is mainly due to the solid pivot screw, which forms the resting point for the ball-bearing 440A drop-point blade.

An attractive ricasso and discreet satin finish complete the visual appearance of the blade, while jimpings on the spine of the blade provide additional safety during tough cutting jobs.

The knife opens with the pinball machine; the liner lock closes the blade intuitively and reliably.

The handle is linear and ergonomic with non-slip cheeks made of light and textured G10, which guarantees an optimal grip even in the most adverse conditions.

Type of production: industrial

Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: G10
Blade length: 79mm.
Blade thickness: 2.7mm.
Closed length: 110mm.
Total length: 189mm.
Balancing: -
Weight: 100g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -

Type of production: industrial
Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: Micarta
Blade length: 88mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 201mm.
Balancing: -
Weight: 113g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -

Based on the Skeksis, fantastical creatures that mix characteristics of the bird of prey, reptile and dragon, this Magnum model is presented as an eccentric pocket knife with exceptional value for money. The ball-bearing, beak-shaped blade echoes the shape and efficiency of Skeksis, so that even complex cutting tasks are performed effortlessly.

The knife opens with both a flipper and thumb hole, while the stainless steel linerlock and grooves on the back of the blade provide good safety when working. Green G10 textured handles resemble reptile skin and provide a comfortable grip. Supplied with a lanyard hole and a point up clip.

Type of manufacture: industrial
Blade: 440 56HRC stainless steel
Blade treatment: -
Handle: G10
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Balance: -
Weight: 115g.
Closure: liner lock
Clip: stainless steel
Scabbard: -
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: Sporting

Production Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos 
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos 
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -

The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.

The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.

Welcome to the next chapter of the Zero Legacy!

Intended Use: Sporting

Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens Anso

In the Kwaiken American Tanto, the Oregon knife designer combines elements of Japanese and American styles. The flipper opens the silk-smooth D2 Tanto blade and locks with the reliable linerlock. The Tanto blade features a straight back and a second curved cutting edge at the front that runs straight to the tip-ideal for precise cuts. The exclusive claim is emphasized by the lightweight G10 handle grips, which give the all-black knife a very distinctive and harmonious appearance.

The slim design and exclusive material make the Kwaiken a classy men's knife with a tactical touch. It comes with a high-quality nylon case for storage and a deep, removable carry tip-up clip.

Intended Use: Tactical/Sportsman

Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: black coating
Handle: stainless steel and G10
Blade length: 90mm.
Blade thickness: 3.1mm.
Total length: 212mm.
Weight: 120g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: design by Lucas Burnley - flipper opening system on ball bearings

The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.

The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade finish: stonewash
Handle: G10 and stonewash stainless steel
Blade length: 79mm.
Blade thickness: 3.1mm.
Total length: 180mm.
Weight: 93g.
Clip: removable, stainless steel
Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
Notes: design by Michael Burch

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances.  The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

The Zeitgeist is the sum total of those visions that are born in the present, shape an entire era, and are long gone by the creative minds that generated them. As a specialist in tactical and outdoor knives, Hungarian free spirit and knife maker Kornel Kiss regularly dares to look beyond the tip of his nose and, in the Boker Plus Makri, combines the elements of a practical EDC knife with the advantages of a Kukri blade, whose historical origins go back to Nepal.

Intended Use: Utility

Production Type: Industrial
Country of manufacture: China
Blade: ful tang in D2 steel
Blade finish: Blacwashed
Handle: G10
Blade length: 71mm.
Blade thickness: 3mm.
Total length: 159mm.
Weight: 94g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kornel Kiss

Intended use: Sporting

Production type: Industrial
Country of production: Italy
Blade: Elmax steel at 61HRC
Blade finish: Satin finish
Handle: Stainless steel and Fat Carbon with gold highlights
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 160mm.
Weight: 110g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Design by Bruno Bruna "Graciut"

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S90V (59-61 HRC)
Blade treatment: Satin finish
Handle: Carbon fiber with anodized aluminum spacers
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 215mm.
Weight: 116g.
Closure: Axis
Clip: stainless steel with PVD treatment, removable
Packaging: cardboard box with Benchmade logos

When you find yourself facing long distances, you need a knife that can do the same. Inspired and designed for tactical situations, the Bailout® pushes the concept of lightweight to the maximum. It boasts an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile, this slim pocket tool achieves an optimal balance between strength and weight, making it suitable for both heavy-duty use and daily carry. The novelty for 2023 is the eye-catching combination of the Crater Blue handle and the Flat Dark Earth blade, creating a striking contrast.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Crater Blue anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movement

Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.

Intended Use: Tactical

Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movement

Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper Voxnaes

Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper Voxnaes

Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper Voxnaes

A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.

A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.

Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.


Intended use: sub/sporting

Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!

Intended Use: Sporty

Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Satin finish
Handle: Titanium Gr.5 Ti6AI4V Dask Stonewash
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper Voxnaes

Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!

Intended Use: Sporty

Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Dark Stonewashed
Handle: Titanium Gr.5 Ti6AI4V Dark Stonewashed with anodizing
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: anodized titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper Voxnaes

The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.

Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.

Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

Better than ever. The 15062 Grizzly Creek is the next phase of the quintessential field multitasker, featuring subtle refinements such as the CPM-S30V non-recurved drop point blade for easy sharpening and orange accents for increased visibility in the field. Retaining the unmistakable folding skinning hook, fantastic ergonomics and classic styling of its predecessor, the Grizzly Creek remains the complete package for the hunter who wants everything in a pocket folder.

Intended Use: Hunting

Production type: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S30V 58/60HRC
Blade finish: satin-finished
Handle: stabilized wood
Blade length: 89mm.
Blade thickness: 3.15mm.
Length closed: 110mm.
Total length: 198mm.
Thickness when closed: 15.2mm.
Weight: 118.5g.
Closure: AXIS Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: retractable skinning hook

Type of production: Industrial
Country of production: USA
Blade: in CPM-S90V steel 59/61HRC
Blade finish: Satin
Handle: Carbon Fiber
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 97.5mm.
Total length: 172mm.
Thickness when closed: 10mm.
Weight: 54g.
Lock: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren Osborne

THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!

Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.




Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC 
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year

We advise our customers that discountische Loyalty are not active for this product

Intended Use: Sporting

Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steel

Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum Rescue is a tool designed for rescue operations, developed in collaboration with my friend Andrea Micheli, military and law enforcement expert, journalist and shooting instructor. Made with a very compact handle, this rescue tool is equipped with 3 blades, each of which has a specific function:

The first and main blade has a thickness of 3 millimeters and is designed to be used for more demanding purposes and to protect the cutting edge of the other two from premature wear. The teeth allow it to cut larger ropes or textile materials, the remaining smooth part has the classic function of a knife. The second blade is a scalpel, which can be used for extremely precise cuts and for emergency first aid interventions. The third blade, on the back of the first, is the smallest of the 3, it has the function of cutting lines, capable of cutting paracord and aramid material.

The interaction of the main blade with the scalpel allows the operator to make a quick emergency cut to free any injured person from his or her clothing.

The line cutter blade and the scalpel are both interchangeable.

Ferrum Rescue has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system. On the back there is also a hard metal glass breaker.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the operator to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 56mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 170mm. (18mm. INCLUDING SCALPEL BLADE)
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Cerakote
Handle: CF-Elite (Grivory)
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos

The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Cerakote
Handle: CF-Elite (Grivory)
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos

Intended use: Collection / Sporting

Type of production: Industrial
Country of production: Italy
Blade: in D2 steel 58/61HRC
Blade finish: satin
Handle: in titanium, with spacers and anodized titanium screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Closed length: 130mm.
Total length: 230mm.
Thickness when closed: 9mm.
Weight: 110g.
Lock: Frame Lock with removable stainless steel flipper
Clip: in anodized titanium, carved from solid
Notes: Opening via Carson flipper system - Opening movement on ball bearings - Design by Sergio Consoli

Bowie knives originated in the United States in the early 19th century and were considered reliable work knives, even occasionally used in combat. Typical of these fixed knives is the massive blade, with a characteristic design, usually more than 15 cm long and with a guard to protect the hand.

As a variant suitable for everyday use, the Chuck Gedraitis Boker Plus Pocket Bowie combines the fascination of the Bowie knife with the flexibility and compactness of a pocket knife. Equipped with a satin-finished Bowie blade made of D2, the three-finger knife easily copes with all day-to-day tasks.

The knife opens via the pull-out thumb stud, while the stainless steel linerlock reliably locks the blade in place.

The ergonomic handle with brown Burlap micarta scales promises a secure grip and gives the knife a touch of the Wild West.

The clip is beautifully integrated into the rear handle and allows tip-up carrying.

Supplied with a high quality nylon case.

Intended use: Hunting / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: D2 58HRC steel
Blade finish: Satin
Handle: micarta
Blade length: 70mm.
Blade thickness: 3mm.
Total length: 158mm.
Weight: 78g.
Sheath: clip
Packaging: cardboard box with Boker logos and nylon case
Note: -

The compact folding knife ready to tackle any terrain.

It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.


Intended Use: Sporty

Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. Schwarz

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel and G10
Blade length: 74mm.
Blade thickness: 3.1mm.
Length closed: 109mm.
Total length: 183mm.
Thickness when closed: 13mm.
Weight: 119g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: FrameLock
Clip: deep pocket, stainless steel, removable
Packaging: cardboard box with Kershaw logos
Notes: Opening via Carson-flipper system on KVT ball bearings

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: BlackWash
Handle: GRN (Glass Reinforced Nylon)
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 112mm.
Total length: 193mm.
Thickness when closed: 12.4mm.
Weight: 79g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Black Oxide
Handle: GRN (Glass Reinforced Nylon)
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 12.4mm.
Weight: 77g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

Intended Use: Sport/Utility

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black DLC
Handle: Grivory
Blade length: 82mm.
Blade thickness: 3.2mm.
Total length: 195mm.
Weight: 101g.
Closure: Shark-Lock
Clip: stainless steel
Sheath: -
Packaging: clear plastic box with Demko logos
Notes: Design by Andrew Demko

Intended Use: Sport/Utility

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Grivory
Blade length: 82mm.
Blade thickness: 3.2mm.
Total length: 195mm.
Weight: 101g.
Closure: Shark-Lock
Clip: stainless steel
Sheath: -
Packaging: clear plastic box with Demko logos
Notes: Design by Andrew Demko

Intended Use: Sporting

Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steel

Intended use: sports/collection

Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 60/62HRC
Blade finish: Black PVD
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, bronze oxidized titanium
Packaging: Cardboard box with Fox Knives logos and faux leather zippered case
Notes: Design by Riccardo Gobbato

Intended use: sporting/collection

Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo Gobbato

Intended use: sporting/collection

Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo Gobbato

Destinazione d'uso: sportivo/collezione

Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox Becut 56/58HRC
Finitura lama: Black Top Shield
Manicatura:  Alluminio Anodizzato
Lunghezza lama: 70mm.
Spessore lama: 3mm.
Lunghezza chiuso: 102m.
Lunghezza totale: 180mm.
Spessore manicatura: 12mm
Peso: 78g.
Meccanismo di chiusura: Liner Lock
Clip: amovibile e reversibile, in acciaio inox
Confezione: Scatola di cartone con loghi Fox Knives
Note: Design by Riccardo Gobbato

This handmade Finnish hunting and outdoor knife is an exclusive version of the classic "Hunting" model and has a unique reindeer horn shape and decoration.

It was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for working larger game such as moose, wild boar and deer. The design and profile of the blade are excellent for skinning game.

The blade is made of UHC (Ultra High Carbon) steel and the handle decorated with reindeer antlers is curly birch, stained and coated with linseed oil, which ensures a firm grip, even when wet. UHC steel makes the knife extremely sharp for a long time.

Comes with a handcrafted sheath of dark vegetable tanned Finnish leather in combination with stained curly birch, for a unique look. Made, sharpened in collaboration with knife maker Kari Ohtonen.

Intended use: Hunting/Sports/Collection

Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 235mm.
Balancing: -
Weight: 130g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather with reindeer antlers
Note: -

The "first" Roselli, with a minimalist design dating back to 1976. For over 45 years it has been used in wild nature and tackles hunting, fishing and life in the open air with ease. This version of Hunting is the full tang version, more balanced and robust. Roselli full tang knives are resistant, durable and perfect for heavy use.

This handmade Finnish hunting knife was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.

This new version features a full tang carbon steel blade and a curly birch handle, coated with linseed oil, which brings a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

When one isn't enough..., this Double Sheath Set, is the two knife configuration that allows you to easily carry both the "Hunting Knife" and the "GrandMother" knife.

Both blades of the two knives are made of forged carbon steel and the handles are made of curly birch, coated with linseed oil, which ensure a firm grip, even when wet. Comes with a handcrafted double sheath of light vegetable tanned Finnish leather, tailored to fit both knives

Roselli - Hunting Knife - R100 - Artisan Knife

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

Roselli - Grandmother Knife - R130 - Artisan Knife

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: -
Total length: 150mm.
Balancing: -
Weight: 52g.
Closure: -
Clips: -
Sheath: brown leather
Note: -

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Satin finish
Handle: Zebrano wood
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 70g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii Matveev

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 75g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii Matveev

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii Matveev

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii Matveev