Coltelleria ed illuminazione
-
MKM - Hero Knife by T. Rumici - Titanium and Carbon Fiber - PRIVATE COLLECTION - MK HR-CFT - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos.
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-AP-HR-CFT -
MKM - Hero by Tommaso Rumici - M390, Titanium and G10 Black - MK-HR-GTBK - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: G10 grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-GTBK -
MKM - Hero by Tommaso Rumici - M390, Titanium and Micarta Natural - MK-HR-NCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-NCT -
MKM - Hero by Tommaso Rumici - M390, Titanium and Green Micarta - MK-HR-GCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-GCT -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Black Micarta - MK-MM-BCT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-BCT -
MKM - Maximo Flipper Design by Bob Terzuola - Green Micarta - MK-MM-GCT - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-GCT -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Titanium - MK-MM-T - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: Titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 134g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-T -
Cold Steel - Voyager Tanto XL Plain - 29AXT - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-10A
Blade treatment: Stonewashed
Manicure: Long Grive-Ex (EMS Grivory)
Blade length: 140mm.
Blade thickness: 4mm.
Length closed: 171mm.
Total length: 235mm.
Thick when closed: 16.5mm.
Weight: 218g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -CS29AXT -
Viper - Novis by Silvestrelli - titanium bolsters and ziricote wood - V5974ZI - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: ziricote wood with heads and spacer in GR2 Titanium
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thick when closed: 16mm.
Weight: 135g.
Washers: in steel and bronze, with ball bearings
Closing: Liner Lock in stainless steel 1.4116
Clip: -
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5974ZI -
MKM - Clap by Bob Terzuola - titanium and G10 - MKLS01-GTBK - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips and titanium braces
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-GTBK -
Victorinox - Huntsman Wood - 1.3711.63 - Swiss Army Knife
The classic Huntsman, now with walnut wood grips!
Functional and elegant, the Swiss Army Knife Huntsman Wood has 13 essential functions and features a slender line, encased between cheeks of elegant and durable walnut. With wood that gives a feeling of artisanal care pleasant to the touch, each instrument is unique, thanks to the natural grain of the material. But do not think that this knife is a fickle type: it is a noble and light companion made for everyday use and everyday adventures, and you can carry it both in your pocket and in a toolbox.
TECHNICAL DATA
Height: 18 mm
Length: 91 mm
Weight: 95gFUNCTIONS
big blade
small blade
corkscrew
can opener with
small screwdriver (also for cross screws)
bottle opener
screwdriver
stripping
awl
reamer
key ring
tweezers
toothpick
scissors
multi-purpose hook (package holder)
saw for woodV-1.3711.63 -
Victorinox - Spartan Camouflage - V-03.94 1:36 - utility knife
The classic Spartan grips with camouflage.
Victorinox 12 functions:
large blade
- Small blade
- Lever caps
- Small screwdriver
- bottle opener
- Can opener
- Large screwdriver
- Wire stripper
- Awl / reamer
- Stainless ring
- Precision tweezers
- Toothpick Nylon
- Weight 70 gramsV-1.3601.63 -
Opinel - N ° 08 Gravure Vélo - Mountain Bike Engraving - Knife
From the famous French company Opinel, a fold has now become a timeless classic.
Blade: Sandvik stainless steel (carbon content 0.4%).
Handle: in beech wood
Locking system: exclusive Virobloc system to lock the blade in closing and opening.No.8
- Blade length: 8cm
- Total length: 19cm
- Weight: 44 gr.
- Special edition 2018 with handle engraved in pyrography
- Series composed of 3 different subjects (Trekking, Ski and Mountain Bike)op-8grve -
Opinel - N ° 08 Gravure Rondo - Trekking Engraving - Knife
From the famous French company Opinel, a fold has now become a timeless classic.
Blade: Sandvik stainless steel (carbon content 0.4%).
Handle: in beech wood
Locking system: exclusive Virobloc system to lock the blade in closing and opening.No.8
- Blade length: 8cm
- Total length: 19cm
- Weight: 44 gr.
- Special edition 2018 with handle engraved in pyrography
- Series composed of 3 different subjects (Trekking, Ski and Mountain Bike)op-8grro -
ExtremaRatio - BD0 R - Desert - Stone Washed - knife
It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steelER-BD0R-DE -
ExtremaRatio - BD0 R - Ranger Green - Stone Washed - knife
It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steelER-BD0R-RG -
ExtremaRatio - BD0 R - HCS - Stone Washed - knife
It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steelER-BD0R-HC -
ExtremaRatio - BD0 R - Black - Stone Washed - knife
It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steelER-BD0R-BK -
MKM - Raut by Burnley - Green G10 - MKVP01-GBGR - knife
Folding knife made by Viper, with BÖHLER M390 MICROCLEAN steel blade, stonewash finish, Fliipper opening system, rotation mechanism with ball bearings. Hybrid locking system, hidden and elegant like a liner lock and at the same time thick and resistant as a frame lock. Titanium spacer and stainless steel screws.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: G10 and Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 13.3mm.
Weight: 130g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Sub FrameLock
Clip: titanium, removable
Sheath: nylon pouch with zip and belt loops
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by ViperMK-VP01-GBGR -
Lionsteel - ROK - Grey Titanium - ROKG - knife
ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:
* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.
* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.
As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin
Handle: Titanium
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 156g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guardLS-ROKG -
Lionsteel - ROK - PVD Aluminum Black - ROKABB - knife
ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:
* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.
* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.
As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Black PVD
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 130g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guardLS-ROKABB -
MKM - Hero Knife by T. Rumici - Titanium and Marbled Carbon Fiber - MK HR-CFT - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-CFT -
Aitor - Brama navaja knife - knife
Vintage folding knife made by the famous Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 200mm.
balancing:
Weight: 130g.
Sheath: -AI-BR -
MKM - Clap by Bob Terzuola - olive wood - MK-LS01-O - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: olive wood grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 115g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-O -
MKM - Clap by Bob Terzuola - titanium and Santos wood - MKLS01-ST - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Santos wood grips and titanium plates
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-ST -
Viper - Novis by Silvestrelli - Green Canvas Micarta - V5972CV - knife
Purpose: sport / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Micarta
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thick when closed: 16mm.
Weight: 115g.
Washers: in steel and bronze, with ball bearings
Closing: Liner Lock in stainless steel 1.4116
Clip: -
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5972CV -
MKM - Clap by Bob Terzuola - carbon fiber - MK-LS01-C - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: carbon fiber grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 107g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-C -
Viper - Novis by Silvestrelli - titanium bolsters and carbon fiber - V5974FC - knife
Purpose: sport / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: GR2 Titanium and Carbon Fiber
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thick when closed: 16mm.
Weight: 135g.
Washers: in steel and bronze, with ball bearings
Closing: Liner Lock in stainless steel 1.4116
Clip: -
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5974FC -
Fantoni - HB01 by W. Harsey - M390 & Carbon Fiber - knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Italy
Blade: M390 61 / 62HRC stainless steel
Blade treatment: Stone Washed
Handle: Titanium and Carbon Fiber
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEYF-HB01-CF -
Fantoni - HB03 by W. Harsey - M390 & Brown G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. HarseyF-HB03-BR -
Opinel - No. 08 Gravure Ski - Engraving Ski - Knife
From the famous French company Opinel, a fold has now become a timeless classic.
Blade: Sandvik stainless steel (carbon content 0.4%).
Handle: in beech wood
Locking system: exclusive Virobloc system to lock the blade in closing and opening.No.8
- Blade length: 8cm
- Total length: 19cm
- Weight: 44 gr.
- Special edition 2018 with handle engraved in pyrography
- Series composed of 3 different subjects (Trekking, Ski and Mountain Bike)op-8grsk -
Kershaw - Bareknuckle Flipper Folder - 7777 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: Sandvik 14C28N stainless steel
Blade treatment: Stonewashed
Handle: 6061-T6 anodised aeronautical aluminum
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 96.4g.
Closure: Sub FrameLock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Carson Flipper opening systemK7777 -
Zero Tolerance - Emerson Green Carbon Fiber - ZT0640 - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with green carbon fiber insert
Blade length: 96mm.
Blade thickness: 4mm.
Length closed: 121mm.
Total length: 216mm.
Weight: 125g.
Closing: FrameLock with stainless steel knocker
Clip: Stainless steel. removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Ernest Emerson - Opening by Thumb DiskZT0640 -
Zero Tolerance - Sinkevich Carbon Fiber Flipper - ZT0456CF - Sprint Run - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Length closed: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 139g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run edition available while stocks last - Design by Dmirty Sinkevich - KVT opening on ball bearingsZT0456CF -
Zero Tolerance - ZT0055BRZ - Bronze Titanium - Sprint Run - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: blackwash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thickness when closed: -
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run Edition available while stocks last - Design by Gustavo T. GTC Knives Coppers - KVT opening on ball bearings - SLT opening system Spring Loaded TabZT0055BRZ -
MKM - Fara by Burnley - Titanium - MKMY01-T - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with fingernail, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin blue anodized titanium, stainless steel spring.
Intended use: Sports / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Titanium
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 117mm.
Total length: 180mm.
Thick when closed: 11mm.
Weight: 90g.
Opening: two-handed
Washers: in steel
Closure: Joint Slip
Clip: -
Sheath: leather pocket with belt loop
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by MercuryMK-MY01-T -
MKM - Raut by Burnley - carbon fiber - MKVP01-CB - knife
Folding knife made by Viper, with BÖHLER M390 MICROCLEAN steel blade, stonewash finish, Fliipper opening system, rotation mechanism with ball bearings. Hybrid locking system, hidden and elegant like a liner lock and at the same time thick and resistant as a frame lock. Titanium spacer and stainless steel screws.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: carbon fiber and titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 13.3mm.
Weight: 130g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Sub FrameLock
Clip: titanium, removable
Sheath: nylon pouch with zip and belt loops
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by ViperMKVP01-CB -
MKM - Fara by Burnley - olive wood - MKMY01-O - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with fingernail, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin blue anodized titanium, stainless steel spring.
Intended use: Sports / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Titanium and Olive Wood
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 117mm.
Total length: 180mm.
Thick when closed: 11mm.
Weight: 90g.
Opening: two-handed
Washers: in steel
Closure: Joint Slip
Clip: -
Sheath: leather pocket with belt loop
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by MercuryMK-MY01-O -
Lionsteel - ROK - Aluminum Black - ROKABS - knife
ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:
* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.
* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.
As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 130g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guardLS-ROKABS