Coltelleria ed illuminazione
-
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
Nitecore - KIT Torch MH25 Pro + Remote RSW1 Pro - USB Rechargeable - 3300 Lumens and 705 Meters - LED Flashlight
MH25 PRO flashlight + RSW1 PRO remote switch kit
TECHNICAL SPECIFICATIONS:
Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 124300 candles
Maximum lighting distance: 705m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
Weight: 130g. without batteries
Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable,
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height
Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standardNI-MH25PRO+RSW1 -
Benchmade - Bailout Knife Crater Blue Aluminum - CPM-M4 - Plain Tanto - 537FE-02 - knife
When you find yourself facing long distances, you need a knife that can do the same. Inspired and designed for tactical situations, the Bailout® pushes the concept of lightweight to the maximum. It boasts an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile, this slim pocket tool achieves an optimal balance between strength and weight, making it suitable for both heavy-duty use and daily carry. The novelty for 2023 is the eye-catching combination of the Crater Blue handle and the Flat Dark Earth blade, creating a striking contrast.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Crater Blue anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537FE-02 -
Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Serrated Tanto - 537SGY-03 - knife
When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537SGY-03 -
Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Plain Tanto - 537GY-03 - knife
When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537GY-03 -
Nitecore - MH15 - USB Rechargeable - 2000 lumens and 250 meters - Powerbank and Led Torch
TECHNICAL SPECIFICATIONS:
Led: 1x Luminus SST40 with a life cycle of 50,000 hours
Operating Modes: 4 light modes and 2 special modes, all electronically regulated
Powers and Durations: 2000 Lumens (45min.) -> 350 Lumens (6.30h) -> 50 Lumens (24h) -> 5 Lumens (200h) -> Beacon -> S.O.S.
Peak power: 15850 candles
Maximum lighting distance: 250m.
Lighting Method: Rear Button
Lighting selection method: Rear Button
Head: aircraft aluminum
Body: Plastic Material
Finish: Anodized, Type III
Lens: Polymeric
Batteries: (built-in, not removable): 1x 21700 3.6V 5000mAh
Measurements: 11.7cm (L) - 3.0cm (D shaft) - 3.0cm (D head) - 2.74cm (D tang)
Weight: 140g.
Accessories: USB-C to USB-C charging cable, wrist strap
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height
Actual power and durability, lab-certified by ANSI/PLATO FL1-2019 standardNI-MH15 -
Nitecore - MH25 Pro - USB Rechargeable - 3300 Lumens and 705 Meters - Led Flashlight
TECHNICAL SPECIFICATIONS:
Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 124300 candles
Maximum lighting distance: 705m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
Weight: 130g. without batteries
Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable,
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height
Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standardNI-MH25PRO -
Nitecore - MH12 PRO - USB Rechargeable - 3300 lumens and 505 meters - LED Flashlight
NITECORE has launched the MH12 Pro, an ultra long-range electric torch with a maximum power of 3,300 lumens. This marks the first electric torch by NITECORE equipped with the LED NiteLab UHi 40 - the newly developed LED with a round light emitting surface (LES), ultra high light intensity and a maximum power of 40W.
Compact yet powerful, the MH12 Pro surpasses medium-sized electric torches (40mm head) not only in terms of power, but also beam distance. Thanks to the cutting-edge LED UHi 40, it can provide a remarkable power of 3,300 lumens, and offers a maximum peak beam intensity of 63,500cd and a maximum range of 505 meters, ideal for emergencies, night searches, outdoor activities, maintenance checks, and more. The round LES of the LED UHi 40 matches perfectly with the round reflector, allowing high light conversion efficiency and a bright and clear hotspot, which helps to quickly and accurately identify targets at night.
The body of the MH12 Pro is made with precision CNC machining and features a non-slip knurling. With a 1mm thick texture, users can maintain a secure grip even with sweaty, wet hands, or when wearing gloves. Moreover, on the front of the torch, there are 4 power indicators and 4 level indicators, which allow intuitive control of the torch status. The U-shaped tail cap is available to prevent accidental activations and offers the possibility of tail standing, along with a hole for lanyard attachment.
The MH12 Pro includes a NITECORE Li-ion battery NL2153HP 21700 with a huge capacity of 5,300mAh and a continuous discharge current of 20A, powering the light for a total of 650 hours at ULTRALOW level. A USB-C charging port with a reversible plug-in is available for direct charging.
The MH12 Pro also has a sensor protection function. When the integrated optical sensor detects an obstacle at a short distance, the brightness of the torch will automatically decrease to prevent overheating. The Daily Mode and Tactical Mode are available for different uses. In addition to a highly efficient constant current circuit (non-PWM), it is also rated IP68 (immersion up to 2m) with a 1 meter impact resistance.
TECHNICAL SPECIFICATIONS:
Led: 1x Luminus UHi 40 with a life cycle of 50,000 hours
Operational Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (0.30h) -> 1200 Lumens (4.30h) -> 300 Lumens (8.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 63500 candles
Maximum illumination distance: 505m.
Ignition Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 21700 3.6V NL2153HP 5,300mAh - also compatible with 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via adapter, sold separately)
Measurements: 13.8cm (L) - 2.6cm (D barrel) - 2.68cm (D head) - 2.7cm (D tail)
Weight: 81.5g. without batteries
Accessories: Rechargeable Li-ion battery NITECORE 21700 (NL2153HP 5,300mAh), USB-C charging cable, Clip, Wrist strap, Replacement O-ring, Nylon sheath
Waterproof: as per IP68 standard, submersible up to 2m. deep for 30min.
Impact resistance: resistant to falls from 1m height
Real powers and durations, certified in the laboratory by ANSI/PLATO FL1-2019 standardsNI-MH12PRO -
Benchmade - Bailout Knife - CPM-M4 - Tanto - Titanium Handle - Limited Edition - 537BK-2302 - knife
A perfect combination in the EDC paradise. The Bailout® holds a special place in the hearts of those who appreciate tactical toughness in their everyday carry, and now we're pairing this sleek and ultralight folding knife with the ultimate super-material: titanium.
The all-new limited edition 537BK-2302 Bailout® features the much-loved CPM-M4 tanto blade, now in cobalt black Cerakote, but the star of this show is its handle made of bead-blasted 6Al-4V titanium manufactured in the USA.
Accentuated with PVD-coated blue hardware, including a Crater Blue lanyard pommel, this edition is limited to 1000 pieces.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Origin: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cobalt Black Cerakote
Handle: 6AI-4V Titanium
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 9.7mm
Weight: 103g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited edition of 1000 piecesBM-537BK-2302 -
Fox - Saturn by D. Simonutti - Acid Stonewashed Aluminum - FX-551ALG - knife
Intended Use: Sporting / Collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Acid Stonewashed
Handle: Anodized Aluminum
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALG -
Fox - Saturn by D. Simonutti - Black Aluminum - FX-551ALB - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade treatment: Idroglider Blackwashed
Handle: Anodized aluminum
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALB -
Fox - Saturn by D. Simonutti - Satin Titanium - FX-551Ti - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade treatment: Satin finish
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551Ti -
Kershaw - Highball XL KVT Knife - 7020 - D2 steel - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 84mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 190mm.
Weight: 108g.
Opening: KVT Bearings system
Washers: in reversible steel
Closure: Frame Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -K7020 -
Sanelli Premana - Paring Knife 8cm - 3336.08 - Kitchen Knife
The 8cm 3336.08 Spelucchino knife from Sanelli Premana is a small kitchen knife, ideal for precision kitchen tasks such as peeling and cutting fruits and vegetables.
The 8-cm blade is made of high-quality X60CrMov14 stainless steel with a hardness of 54-56 HRC, which ensures a long edge life. The blade has a sharp edge designed to cut cleanly and precisely.
The ergonomic polypropylene handle, a durable, non-slip material, provides a firm and comfortable grip during use.
Sanelli Premana is an Italian company specializing in the production of high-quality kitchen knives used in both professional and domestic settings. Their products are known for their reliability, durability and precision, and are highly valued by restaurant professionals worldwide.
Recommended Use: vegetable paring knife, utility knife
Country of manufacture: Italy
Blade: made of surgical stainless steel with a hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 80mm.
Total length: 185mm.
Packaging: cardboard blade cover with Sanelli logos
Weight: 33g.
s333608 -
Benchmade - Bailout Knife - CPM-M4 - Plain Tanto - 537GY-1 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade finish: Gray Coated
Handle: Woodland Green anodized 6061-T6 aluminum
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thick when closed: 10.4mm
Weight: 70g.
Closing system: AxisLock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: --
BM-537GY-1 -
Kershaw - Oblivion SpeedSafe Frame Flipper - 3860 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 206mm.
Thick when closed: 10.2mm.
Weight: 146g.
Opening: Carson Flipper system and SpeedSafe Assisted Opening
Washers: steel,
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -K3860 -
Kershaw - Innuendo Frame by Les George - 3440 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Gray TiNi
Handle: Stainless steel with bead-blasted finish
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 10mm.
Weight: 127g.
Opening: through ambidextrous opening disc placed on the blade
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with Gray TiNi treatment
Packaging: Cardboard box with Kershaw logos
Notes: Design by Les GeorgeK3440 -
Kershaw - Decibel Frame Knife - 2045 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Matte Gray TiNi
Handle: Stainless steel with Matte Gray TiNi finish
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 94mm.
Total length: 178mm.
Thick when closed: 15mm.
Weight: 83g.
Opening: through ambidextrous opening pin placed on the blade
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -K2045 -
Kershaw - Parsec Frame Flipper - 2035 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed Brown PVD
Handle: Stainless steel with Stonewashed Brown PVD finish
Blade length: 7.6mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 182mm.
Thick when closed: 10.2mm.
Weight: 99g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -K2035 -
Fox - Radius by Denis Simonucci - Black PVD Titanium - FX-550TIB - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Black PVD
Handle: Titanium with Black PVD treatment
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 185mm.
Weight: 140g.
Closing: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, pouch with zip
Notes: Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"FX-550TIB -
Lionsteel - THRILL - SlipJoint Aluminum Black - TLABS - knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: billet aluminum
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 62g.
Closure: SlipJoint with steel leaf
Clip: retractable, made from solid
Packaging: cardboard box with LionSteel logos
Note: -LS-TLABS -
Nitecore - TIKI LE - Rechargeable USB + Red / Blue Keychain - 300 lumens and 71 meters - Led Flashlight
Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x Red LED + 1x Blue LED
Operating Modes: 4 light powers, selectable with the specific dedicated button + Red Light + Blue Light + Flashing Red / Blue
Power and Durability: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> Red Light -> Blue Light -> Red / Blue Flashing
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m in height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional red light - Additional blue lightPowers and durations certified in the laboratory by ANSI / NEMA FL1 standards
NI-TIKI-LE -
Nitecore - TIKI - USB + UV Rechargeable Keychain - 300 lumens and 71 meters - Led Flashlight
Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x UV Led + 1x HI CRI led
Operating Modes: 4 light powers, selectable with the specific dedicated button + UV + white Flood Light + Warning Flash
Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> UV -> Flood Light -> Warning Flash
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m. of height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional 500mW and 365nm UV light - Additional "warm" white light HI CRIPowers and durations certified in the laboratory by ANSI / NEMA FL1 standards
NI-TIKI -
Fantastic Animals and Where to Find Them - Albus Dumbledore Magic Wand - Collector Box NN9906
An authentic reproduction of Albus Dumbledore's Magic Wand used in the movie "Fantastic Beasts Wands"
It is made of resin and has a length of 36 cm.
Comes with a cardboard box and Olivander velvet.It is an officially licensed product Warner Bros Entertainment Inc.
Fantastic Beasts (Fantastic Beasts) is a fantasy film series directed by David Yates, written by JK Rowling and produced by Warner Bros. Started in 2016 with Fantastic Animals and where to find them and continued in 2018 with Fantastic Animals - Grindelwald Crimes, will be composed from five films [1].
It is a spin-off of Harry Potter inspired by the depth manual Fantastic Beasts and Where to Find Them, both written by Rowling. The series is set in the Magic World, a universe shared with Harry Potter, but some sixty years earlier in the internal chronology, in a period of time ranging from 1926 to 1945. The plot follows the magizoologist Newt Scamander in his adventures around for the world in search of magical creatures and in his efforts to thwart the dark wizard Gellert Grindelwald.NN9906 -
Harry Potter - Magic Wands Dark Wizard Wand Collection NN7351
The set includes a wall display in the shape of the Black Mark and 5 sticks, the baton of Voldemort and the 4 of the Death Eaters:
The display measures 43 cm high and 16.5 cm wide. The sticks measure about 38 cm in length.It is an officially licensed product Warner Bros Entertainment Inc.
NN7351 -
Nitecore - SRT7i - Smart Ring Tactical - 3000 Lumen Long Throw and 580 meters - USB-C Rechargeable Led Torch
Introducing the NITECORE SRT7i, the latest advancement in the Tactical SmartRing Series. This flagship model represents a breakthrough in the field of tactical flashlights, being equipped with the 4th generation of the Smart Switch, which allows a twist and a push for one-handed control of mode switching and stepless brightness adjustment. This feature makes it particularly suitable for tactical use and immediate response to various situations.
KEY FEATURES:
* Dual tail switches allow for intuitive operation, specifically tailored for law enforcement, hunting and tactical applications.
* Fourth generation of SSR (Smart Selector Ring) technology to quickly and smoothly select brightness levels and operating modes
* Maximum peak beam intensity of 87,500cd and maximum range of 580 meters with maximum autonomy of 800 hours
* STROBE READY™ technology to allow quick access to STROBE mode (patent no. ZL201320545349.4)
* Li-ion battery intelligent charging circuit via USB-C port
* NITECORE 21700i Li-ion battery included (NL2150HPi 5,000mAh)
* Built-in Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
* Break glass on silicon nitride ceramic torch head
* Constructed of aircraft grade aluminum alloy with HA III military grade hard anodized finish
* Waterproof and dustproof grade according to IP68 standard (2 meters submersion) and shock resistant up to 2 meters
TECHNICAL SPECIFICATIONS:Led: 1x SFT-70 high performance LED, with a life cycle of 50,000 hours
Operating modes: adjustable light output, between 0.1 to 3000 lumens and 1 strobe, electronically regulated
Powers and Durations: 3000 Lumens (3.15h) -> LOW 100 Lumens -> ULTRA LOW 0.1 Lumens (800h) -> Strobe 3000 Lumens
Peak power: 87500 candles
Maximum lighting distance: 580m.
Power-on Method: Back Button and StrobeReady Button
Luminous dial method: Smart Dial Ring and double buttons
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: Ultra clear hardened glass with anti-reflection treatment
Batteries: (included): 1x 21700 3.6V 18W NL2150HPi - also compatible with 2x CR123 3.0/3.6/3.7V using included adapter
Measurements: 16.3cm (L) - 2.54cm (D shaft) - 4.0cm (D head) - 3.1cm (D shank)
Weight: 175g. without batteries
Accessories: NITECORE 21700i Rechargeable Li-ion Battery (NL2150HPi 5,000mAh), CR123 Battery Adapter, Holster, Clip, Lanyard, Spare O-ring, USB-C Charging Cable
Waterproof: as per IP68 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands drops from 2m in heightNI-SRT7i -
Al-Mar - Hawk - Iron Wood 1002 Full Set - PRIVATE COLLECTION - Vintage knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition, close to new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Some small hairline on heads and metal insert
* Box: Present - Original
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: - - Original
* Checked and certified by our in-house laboratory
Intended Use: Gentleman / Collection
Production type: Industrial
Country of manufacture: Seki - Japan
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: iron wood, nickel silver insert, stainless steel heads and brass folders
Blade length: 64mm.
Blade thickness: 2mm.
Length closed: 85mm.
Total length: 147mm.
Weight: 53g.
Closure: Back Lock
Sheath: Nylon, with belt loop and Velcro closure
Packaging: Cardboard box with Al Mar logos
Notes: Previously purchased - Near mint condition - Full SetAM-1002CP -
Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife
Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left headAM-3002DOL -
Denis Simonutti - Mist - Limited Edition #4 - M390 Black PVD Titanium - Craft Knife
Intended Use: Collection
Type of production: Midtech
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade Treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment and bronze-colored anodized titanium spacers
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 110g.
Closure: FrameLock
Clip: Bronze-colored anodized titanium, machined from solid
Packaging: Denim pouch, warranty certificate, Velcro patch, small 6-sided playing dice
Notes: Designed and made by Denis Simonutti - Specimen number 4 of a micro-production batch of only 10 piecesDS-MIST4€0.00Only -50 leftOut of stock -
Andrea Pizzadili - Pattada 23cm Sardinian mouflon horn - PRIVATE COLLECTION - handcrafted knife
Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory
Intended Use: Regional Italian / CollectionType of production: Artisan
Country of Production: City of Pattada, Sardinia, Italy
Blade: 420 stainless steel
Blade finish: satin-finished
Handle: Sardinian mouflon horn and alpaca
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 125mm.
Total length: 230mm.
Thickness when closed: 17mm.
Weight: 74g.
Closing mechanism: -
Clip: -
Sheath: -
Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
Notes: knife withdrawn from private collection, mint condition, like newAP-PATMU-CP -
Fox - Saturn knife by D. Simonutti - Black PVD Titanium - FX-551TiPVD - knife
Intended Use: Sporting / Collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel M390 58/60HRC
Blade treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551TiPVD -
Strider Knives - AR Tiger Stripe - Flat G10 Scales S30V by Paul Bos - PRIVATE COLLECTION - knife
Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.
Intended Use: TacticalManufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium
Package: Nylon pouch with zipper
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the bladeST-AR-CPR -
Wander Tactical - Tryceratops knife Clip Point - SanMai V-Toku2 & Black Micarta - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.
Tryceratops model .:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: set back
Weight: 188g.
Sheath: in kydex black
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-TRY-C-VT -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom knife
In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All RoundType of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: set back
Weight: 229g.
Sheath: in Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive pieceAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT -
Deroma - Pattada knife craft knife in ram's horn - 27cm - craft knife
Intended use: Regional
Type of production: Artisan
Lama production: Italy
Blade: 12c26 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 270mm.
Thick when closed: 19mm
Balancing: -
Weight: 105g.
Closing: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisan production certificate signed by Antonio Deroma
Note: -DR-RES-27 -
Museum Replicas Windlass - Accolade Dagger of the Knights Templar 404335 - craft dagger
This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.404335 -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom
In collaboration with Wander Tactical we have decided to offer their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products offered by them, we chose a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All Round
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive pieceWT-SC-VT2B -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SCRAMBLER Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-TR-VT2 -
Wander Tactical - Raptor knife - SanMai V-Toku2 & OD green Paracord - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
RAPTOR model:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-RAP-VT2 -
Wander Tactical - Lynx knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
Lynx Model:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 107mm.
Blade thickness: 6.5mm.
Total length: 237mm.
Balancing: backward
Weight: 310g.
Sheath: brown leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-LY-VT2 -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SCRAMBLER Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT2R -
White River Knife & Tool - Firecraft FC4 knife - Kydex - knife
Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / SportsType of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 225mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 172g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket
Send feedback
History
SavedWR-FC4K -
White River Knife & Tool - Firecraft FC5 knife - Kydex - knife
Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / SportsType of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 250mm.
Thick when closed: -
Balancing: 1.5 cm backward
Weight: 232g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocketWR-FC5K -
Kershaw - Mixtape G10 Liner Knife - 2050 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: G10 with steel folders
Blade length: 86mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 181mm.
Thick when closed: 16mm.
Weight: 75g.
Opening: through ambidextrous opening disc placed on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, with stonewashed treatment
Packaging: Cardboard box with Kershaw logos
Note:K2050 -
Medford Knife and Tools - Smooth Criminal Flipper - PVD Blade & Black Aluminum - knife
Intended use: Tactical / EDC
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Black PVD
Handle: anodized aluminum
Blade thickness: 4mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Weight: 104g.
Opening: through Carson Flipper system
Closure: Button Lock
Clip: titanium, removable, with Black PVD treatment
Packaging: cardboard box with Medford logos
Note: -M039-40AG -
Medford Knife and Tools - USMC The Fighter Flipper - Bronze Anodized Titanium - knife
Intended use: Tactical / Heavy Duty
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Black PVD
Handle: Titanium with bronze anodizing and black PVD shank
Blade length: 106mm.
Blade thickness: 5mm.
Length closed: 132mm.
Total length: 238mm.
Thick when closed: 15mm.
Weight: 172g.
Opening: through the Karst pinball system
Closing: Framelock in titanium
Clip: titanium, removable, flamed
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg MedfordM204-36A1 -
Fox - Radius by D. Simonucci - Limited Edition Damascus & Carbon Fiber - FX-550DCF - knife
Intended use: Collection
Type of production: Industrial
Country of production: Italy
Blade: Damasteel Gysinge DS93X damascus stainless steel
Blade treatment: -
Handle: Carbon fiber and Copper
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 185mm.
Weight: 115g.
Closing: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives, pouch with leather zip, part of the damask steel advanced by the production of the blade
Notes: Limited edition made only in 15 numbered copies on knife and box - Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"FX-550DCF -
Fox - Radius by D. Simonucci - Limited Edition Damascus & Black PVD Titanium - FX-550DTI - knife
Intended use: Collection
Type of production: Industrial
Country of production: Italy
Blade: Damasteel Damacore DC18N stainless steel damask
Blade treatment: -
Handle: Titanium with Black PVD treatment
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 185mm.
Weight: 145g.
Closing: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives, pouch with leather zip, part of the damask steel advanced by the production of the blade
Notes: Limited edition made only in 15 numbered copies on knife and box - Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"FX-550DTI -
Fox - Radius knife by Denis Simonucci - Sandblasted Titanium - FX-550TI - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Satin finish
Handle: Titanium with Sandblasted finish
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 185mm.
Weight: 140g.
Closing: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, pouch with zip
Notes: Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"FX-550TI -
Wander Tactical - Hurricane Folder knife Gen.III - Lagunari - Black PVD - Limited Edition
Limited and exclusive edition for the civilian market of the Hurricane Folder model made in only 10 numbered pieces and with the Logo of the amphibious fight instructors of the Lagunari (to whom it was supplied directly by the Wander Tactical). The model also features a partially serrated blade and DLC surface treatment.
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: industrial
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: DLC Black
Handle: titanium briefcases with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing time: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic packaging with Wander Tactical and Lagunari logos
Notes: Limited Edition with logo of the amphibious fight instructors of the Lagunari and number III generation production 2019WT-HURR-LE -
ExtremaRatio - Fulcrum C Satin knife in San Mai V-TOKU2 - Limited Edition - knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
FULCRUM C model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.
FULCRUM C is the compact version of FULCRUM, it maintains all the characteristics of solidity and robustness and, thanks to the reduced dimensions of the blade (only 110 mm) and the handle, it is easily portable and concealable. The rigid sheath can be positioned horizontally, vertically or in a 45 ° inclined position. The only safety of the sheath is automatic with extraction and re-insertion by pressure, this detail makes it an intuitive and extremely fast tool, particularly suitable for emergency use and for personal defense.
Use: backup knife
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade thickness: 6.3 mm.
Blade length: 90 mm.
Total length: 210 mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 210g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificateAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ERCC-P-F-VT2 -
ExtremaRatio - Shrapnel OG Satin - San Mai V-TOKU2 Limited Edition - knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SHRAPNEL OG model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.
SHRAPNEL OG is a truly multi-purpose "back-up", with strong combat attitudes. The leaf blade is characterized by a wide flat winding, with a narrow sharpening angle which makes it particularly sharp. The rigid sheath can be positioned horizontally, vertically or inclined at 45 °. The SHRAPNEL OG is produced without the top guard.
Use: tactical, sports, hiking, collection
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Handle: forprene
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 190g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificateAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ERCC-P-S-VT2 -
Linder - Master Hunter in plum and brass - 191415 - hunting knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Germany
Blade: 440A stainless steel
Blade treatment: Satin finish
Handle: plum wood with brass guard and knob
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 270mm.
Balancing: set back
Weight: 248g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -LI-191415 -
Linder - Stag Bowie - 196118 - hunting knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: Satin finish
Handle: Stag with steel guard and aluminum knob
Blade length: 177mm.
Blade thickness: 4.5mm.
Total length: 305mm.
Balancing: advanced
Weight: 274g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -LI-196118 -
Medford Knife and Tools - Praetorian Scout M/P D2 - Black PVD Blade and OD Green G10 - Knife
Intended use: Tactical / Collection
Type of production: Midtech
Country of production: Usa
Blade: in D2 steel
Blade treatment: Black PVD
Handle: G10 and titanium liners 6AL4V
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 230mm.
Thick when closed: 15mm.
Balancing: on the guard branch
Weight: 214g.
Closure: Liner Lock
Clip: in Black PVD stainless steel
Sheath: nylon case with zip
Packaging: cardboard box with Medford logos
Notes: Designed and built by Greg MedfordM30-1010 -
Medford Knife and Tools - Praetorian Scout M/P D2 - Black PVD Blade and Black G10 - Knife
Intended use: Tactical / Collection
Type of production: Midtech
Country of production: Usa
Blade: in D2 steel
Blade treatment: Black PVD
Handle: G10 and titanium liners 6AL4V
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 230mm.
Thick when closed: 15mm.
Balancing: on the guard branch
Weight: 214g.
Closure: Liner Lock
Clip: in Black PVD stainless steel
Sheath: nylon case with zip
Packaging: cardboard box with Medford logos
Notes: Designed and built by Greg MedfordM30-0808 -
Lionsteel - THRILL - SlipJoint Aluminum Green - TLABS - knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: billet aluminum
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 62g.
Closure: SlipJoint with steel leaf
Clip: retractable, made from solid
Packaging: cardboard box with LionSteel logos
Note: -LS-TLAGS -
Down Under Knives - The Outback Bowie - USED - knife - L446128
USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratoryIntended use: Hunting / Outdoor
Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.
L446128-U -
Wander Tactical - Scrambler - Satin sanmai Cos & Brown Micarta - custom knife
In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Occupation: EDC / Light Utility / All Round
Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-T2-RMB -
Nitecore - NEW P30 - Hunting Light - 1000 lumens and 618 meters - 21700 USB Battery - Led Flashlight
WHY CHOOSE IT:
Hunting / scouting use - Remarkable illumination depth 618m - Convenient charging system integrated in the battery - High autonomy thanks to the new 5000 mAh 21700 battery - Practicality and immediacy of the light selection controls.
KEY FEATURES:
* Italian Guarantee Nitecore Italy: Torch guaranteed 5 years - Battery guaranteed 12 months
* Charging system integrated in the Li-ion battery via Micro-USB port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Use a Cree XP-L HI V3 for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with anodized military specifications
* IP68 waterproof and submersible (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of heightPowers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7 3400mAh - in different conditions of use or using different batteries, data may vary
Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically adjusted + Strobo, S.O.S. and Beacon
Power and Durability: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Peak power: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear Button
Bright selection method: Front Button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: 21700 with micro-usb direct charging included in the package - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head)
Weight: 158g. - batteries excluded
Accessories: clip, wrist strap, belt cordura sheath, spare o-ring, anti-roll ring
Waterproof: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1.5m in height
NI-NEWP30 -
Harry Potter - Magic Wands Marauder's Map Wand Collection NN7905
The set includes an exhibitor of the Marauder's Map and four official wands of the magicians who created the map:
Remus Lupine ™, Peter Pettigrew ™, Sirius Black ™ and James Potter ™.
The display measures 39 cm high and 20 cm wide. The sticks measure about 38 cm in length.
It is an officially licensed product Warner Bros Entertainment Inc.
NN7905 -
Wander Tactical - Uro - Iron Washed and Black Micarta - Standard Version
Type of production: semi-custom
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Iron Washed
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 466g.
Sheath: in black leather
Packaging: -
Notes: semi-custom series produced by Wander Tactical. This series differs from the custom line as it is made with standard finishes and materials and is characterized by the presence of the laser engraved Wander Tactical brand on the left side of the blade.uro-iron-s -
Wander Tactical - Smilodon Satin SanMai CoS & Black Green Micarta - craft knife
In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.WT-T2-SMB -
Nitecore - HC35 - USB Rechargeable Angular Headlamp - 2700 lumens and 134 meters - Led Flashlight
KEY FEATURES
* Uses 4 x CREE XP-G3 S3 LEDs with a maximum output power of 2,700 lumens
* Light and robust torch body with CNC machining, with excellent heat dissipation capabilities
* Uses a micro-blasted reflective parabola to guarantee a uniform and diffused light
* Maximum light intensity of 4,500cd and maximum range of 134 meters
* Powered by a high-capacity 21700 Li-ion battery that is compatible with both 18650 and CR123 batteries to allow constant light up to 1,200 hours
* A single power and selection button that controls 5 brightness levels and 3 special modes
* Integrated charging circuits for Li-ion batteries via Micro-USB port
* NITECORE 21700 Li-ion rechargeable battery (NL2140HP 4,000mAh) included
* STROBO mode constantly changes frequency randomly, to maximize disorientation effects * Integrated potentiometer, with indicator light to indicate the remaining battery charge (Patent N ° ZL201220057767.4)
* The integrated potentiometer can also indicate the residual voltage of the battery inserted, with a minimum voltage deviation (± 0.1V)
* Wide 100 ° lighting angle, designed specifically for hiking activities
* ATR (Advanced Temperature Regulation) technology for temperature regulation (Patent N ° ZL201510534543.6)
* Elastic front band included, light and breathable
* Electronic protection against battery polarity reversal
* Built in solid aeronautical aluminum alloy
* Robust HAIII type anodization with military specifications
* Immersible as per IPX8 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height
* Flat, magnetic rear shank, to keep the torch standing or anchored to metal surfaces
TECHNICAL DATA:
LED: 4x Cree XP-G3 S3 with 50,000 hour life cycle
Output 5 constant light outputs, digitally regulated + 3 special modes
1 lumens (1200h.) -> 40 lumens (52h.) -> 270 lumens (8h. And 15min.) -> 800 lumens (3h.) -> 2700 lumens (45min.) + Strobe, Beacon and SOS
Capacity: up to 134mt.
Peak power: 4500 candles
Battery (included): 1x IMR 21700 rechargeable (NL2140HP 3.6V, 14.4Wh, discharge 15A); if necessary it can also work with 1x 18650 Li-Ion 3.7V or 2x CR123 3.0V without being able to reach 2700 lumens of power
Torch size: 128.2x26x28.3mm.
Weight: 100g (only torch, without batteries, elastic band and frontal support)
Lens: in micro-blasted hardened glass
Body: in aeronautical aluminum
Finish: anodized, Type III
Belt: elastic, adjustable in diameter and in height, with silicone coupling
Notes: water resistant as per standard IP68, submersible at 2mt. of depth for 30min. - Magnetic rear cap to hook it independently to any metal surface.
Included accessories: USB charging cable, clip, elastic front band, front support, wrist strap, spare o-ringNI-HC35 -
Deroma - Pattada handmade knife in ram's horn - handmade knife
Intended use: collection / sports
Type of production: Artisan
Lama production: Italy
Blade: 12c26 stainless steel
Blade treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 145mm.
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closing: -
Clip: -
Sheath: -
Packaging: rigid package with artisan production certificate signed by Antonio Deroma
Note: -DR-PAT€307.38Out of stock -
White River Knife & Tool - Firecraft knife FC 3,5 PRO G10 Black - knife
Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / Sports
Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Black
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thick when closed: -
Balancing: 1 cm backward
Weight: 106g.
Closing: -
Clip: -
Sheath: in kydex with flintlock
Packaging: Wooden box with WRKT logos
Note:WR-FC3.5PB -
White River Knife & Tool - Firecraft knife FC 3,5 Pro G10 Orange - knife
Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / SportsType of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Orange
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thick when closed: -
Balancing: 1 cm backward
Weight: 106g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Note:WR-FC3.5O -
White River Knife & Tool - Firecraft FC7 Bushcraft knife - knife
Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives
Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / SportsType of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 175
Blade thickness: 5mm.
Length closed: -
Total length: 295mm.
Thick when closed: -
Balancing: 0.5 cm advanced
Weight: 320g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocketWT-FC7-LS -
White River Knife & Tool - Firecraft FC5 knife - knife
Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives. The deep finger choil protects fingers while applying pressure whittling, cutting or chopping. Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife. Features a polished stainless steel divot for use with a fire bow. This is a well-designed, great looking, and robust knife intended for serious work.
Blade Length: 5”
Overall Length: 10”
Blade Steel: CPM S30V
Hardness: 59 HRC
Sheath: Leather
White River Guarantee: If you are not 100% satisfied with this knife, send it back for free repair or replacement.
WR-FC5-LS -
White River Knife & Tool - Firecraft FC4 knife - knife
Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives. The deep finger choil protects fingers while applying pressure whittling, cutting or chopping. Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife. Features a polished stainless steel divot for use with a fire bow. This is a well-designed, great looking, and robust knife intended for serious work.
Intended use: Hunting / Sports
Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 225mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 172g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Notes: flask housed in a pocket of the sheathWR-FC4-LS -
Wander Tactical - Scrambler - Ice Brush & Darkwood Micarta - Custom Knife
Occupation: EDC / Light Utility / All Round
Type of production: Handcrafted
Production Country: Italy
Blade: integral, steel D2 59 / 61HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 82mm.
Blade thickness: 5mm.
Overall length: 200mm.
Balancing: backward
Weight: 175g.
Sheath: Kydex, thermally compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight differences of finishes, colors and materials from product photographedWT-12657 -
Wander Tactical - Lynx - Satin SanMai CoS Convex & Brown Micarta - custom knife
In collaboration with Tactical Wander we decided to bring them light utility, the Lynx model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Occupation: Light Utility / All Round
Type of production: Artisan
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.8mm.
Overall length: 220mm.
Balancing: backward
Weight: 360g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.COS-LY-B