Coltelleria ed illuminazione
-
Wander Tactical - Tryceratops knife Clip Point - SanMai V-Toku2 & Black Micarta - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.
Tryceratops model .:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: set back
Weight: 188g.
Sheath: in kydex black
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-TRY-C-VT -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom knife
In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All RoundType of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: set back
Weight: 229g.
Sheath: in Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive pieceAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom
In collaboration with Wander Tactical we have decided to offer their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products offered by them, we chose a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All Round
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive pieceWT-SC-VT2B -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SCRAMBLER Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-TR-VT2 -
Wander Tactical - Raptor knife - SanMai V-Toku2 & OD green Paracord - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
RAPTOR model:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-RAP-VT2 -
Wander Tactical - Lynx knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
Lynx Model:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 107mm.
Blade thickness: 6.5mm.
Total length: 237mm.
Balancing: backward
Weight: 310g.
Sheath: brown leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-LY-VT2 -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SCRAMBLER Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT2R -
ExtremaRatio - Fulcrum C Satin knife in San Mai V-TOKU2 - Limited Edition - knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
FULCRUM C model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.
FULCRUM C is the compact version of FULCRUM, it maintains all the characteristics of solidity and robustness and, thanks to the reduced dimensions of the blade (only 110 mm) and the handle, it is easily portable and concealable. The rigid sheath can be positioned horizontally, vertically or in a 45 ° inclined position. The only safety of the sheath is automatic with extraction and re-insertion by pressure, this detail makes it an intuitive and extremely fast tool, particularly suitable for emergency use and for personal defense.
Use: backup knife
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade thickness: 6.3 mm.
Blade length: 90 mm.
Total length: 210 mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 210g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificateAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ERCC-P-F-VT2 -
ExtremaRatio - Shrapnel OG Satin - San Mai V-TOKU2 Limited Edition - knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SHRAPNEL OG model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.
SHRAPNEL OG is a truly multi-purpose "back-up", with strong combat attitudes. The leaf blade is characterized by a wide flat winding, with a narrow sharpening angle which makes it particularly sharp. The rigid sheath can be positioned horizontally, vertically or inclined at 45 °. The SHRAPNEL OG is produced without the top guard.
Use: tactical, sports, hiking, collection
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Handle: forprene
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 190g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificateAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ERCC-P-S-VT2 -
Wander Tactical - Scrambler - Satin sanmai Cos & Brown Micarta - custom knife
In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Occupation: EDC / Light Utility / All Round
Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-T2-RMB -
Wander Tactical - Uro - Iron Washed and Black Micarta - Standard Version
Type of production: semi-custom
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Iron Washed
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 466g.
Sheath: in black leather
Packaging: -
Notes: semi-custom series produced by Wander Tactical. This series differs from the custom line as it is made with standard finishes and materials and is characterized by the presence of the laser engraved Wander Tactical brand on the left side of the blade.uro-iron-s -
Wander Tactical - Smilodon Satin SanMai CoS & Black Green Micarta - craft knife
In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.WT-T2-SMB -
Wander Tactical - Scrambler - Ice Brush & Darkwood Micarta - Custom Knife
Occupation: EDC / Light Utility / All Round
Type of production: Handcrafted
Production Country: Italy
Blade: integral, steel D2 59 / 61HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 82mm.
Blade thickness: 5mm.
Overall length: 200mm.
Balancing: backward
Weight: 175g.
Sheath: Kydex, thermally compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight differences of finishes, colors and materials from product photographedWT-12657 -
Wander Tactical - Lynx - Satin SanMai CoS Convex & Brown Micarta - custom knife
In collaboration with Tactical Wander we decided to bring them light utility, the Lynx model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Occupation: Light Utility / All Round
Type of production: Artisan
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.8mm.
Overall length: 220mm.
Balancing: backward
Weight: 360g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.COS-LY-B