Knives and Flashlights

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in excellent condition
* Commercially available: No
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: in plastic material
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Blade: AUS-8 high-carbon 57/58HRC stainless steel
Handle: in cotton with stingray skin insert
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 290mm.
Weight: 322g.
Sheath: plastic material
Note:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Not available (limited run sprint run in K390 steel).
* Sharpening: Re-sharpened
* Marks on blade: Small marks, especially near the tip, left side
* Marks on handle: Signs of wear on the titanium clip, a major scratch on the right side of the handle, above the frame
* Box: Present and original, in cardboard.
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Sporting/Collection

Type of Production: Industrial
Country of Production: Italy
Blade: In cold work tool steel Bohler K390 hardened to 64/65HRC
Blade finish: Microbead blasted and matted
Handle: Titanium
Blade length: 74mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 74g.
Closure: Titanium Frame Lock with steel clapper
Clip: Titanium 6Al4V
Packaging: Cardboard box with LionSteel logos
Notes: Opening on IKBS ball bearings with carson flipper system - DIffers from the standard model in both the steel used, the upper blade profiling, the finish of the blade, the packaging, and the lack of possibility to customize the opening system by removing the flipper - previously purchased knife from a private collection

Type: Carving / Chef's Knife
Recommended uses: raw meat, cleaning of fish and cutting of vegetables
Blade type: Forged
Steel: Friodur Sigmaforge at 58 / 59HRC
Blade length: 200mm.
Notes: Limited Edition 2900 pieces to celebrate 290 years of Zwilling
Handle: in bocote wood

Packaged in an exclusive, elegantly designed Thermobeech box, perfect for a gift, the Intercontinental Chef's Knife is accompanied by an inlaid fact sheet signed by ZWILLING board members.

Made in Solingen, Germany
- Exclusive limited edition anniversary knife of 2900 knives, the knife number is laser engraved on each blade and in the knife package
- NO STAIN steel with a special formula with a high carbon content, flexible and corrosion resistant
- The SIGMAFORGE® knife is forged from a single piece of solid steel
- The vacuum hardened FRIODUR blade stays sharp longer and has superior resilience
- Solid tang for superb stability
- Ergonomic, hand finished handle with three rivets in high quality bocote wood

• A PERFECT LINE
For those who value high quality "Made in Germany", the ZWILLING PRO series is the best choice. Both for professionals and for those who are passionate about cooking: ZWILLING PRO knives are the perfect synthesis of innovation, traditional design and absolute precision. From paring knife to Santoku knife, this series offers blades suitable for all uses in the kitchen.
A collection to satisfy all needs in a modern kitchen: great quality and perfect line.

• QUALITY
The exclusive composition of ZWILLING J.A. HENCKELS represents the perfect balance between chromium and carbon content: the secret to a top quality steel. The knives with the FRIODUR brand are the product of a special cryogenic hardening treatment that enhances their quality. They maintain their sharpness extraordinarily, are particularly resistant to corrosion and flexible.

• FUNCTIONALITY:
The perfectly sharpened blade along its entire length allows you to cut from the tip to the knot. The type of sharpening satisfies both the European and Japanese cutting tradition.

• ACCURACY:
The knives with the SIGMAFORGE brand are obtained by precision forging from a single piece of steel, for a perfect geometry. Fundamental requirement for precision sharpening and for the best cutting properties.

• HANDLING:
The wedge-shaped geometry of the blade allows for extraordinary stability and easy cutting; the curved shape of the knot guarantees safe and precise use.

• STRENGTH :
A classic for the professional kitchen. The seamless shank 3-rivet design is synonymous with perfect balance.

Designed by David Repossini, instructor of Krav-Maga with decades of experience in martial arts and combat systems in the military, was founded with the purpose of joining a blade with a survival for the fight, trying to be more effective than high knives already in business. The result is the model Outlander, a tool that can be picked up and handled in six major ways and making it adaptable to different contexts.

It is effective both for heavy work, such as cutting of a branch, is for precision work, such as making out to light the campfire. In combattimentoè well balanced, maneggevle and forms that make it effective is to strike or engage, and to achieve the most sensitive parts in extension.

The variety of grips allows feasible to do many different techniques of combat systems also bringing together elements typical of the kukri and karambit.

Intended Use: Combat Survival

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: G10
Blade length: 165mm.
Blade thickness: 6mm.
Overall length: 295mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 466g.
Sheath: Nylon with leather loop
Packaging: Cardboard Box
Notes: designed by David Repossini

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Type: Santoku
Recommended Uses: raw meat, fish cleaning and cutting vegetables
Type Blade: Forged
Steel: Friodur SIGMAFORGE 58 / 59HRC
Blade length: 180mm.
Handle: black plastic, riveted


• A PERFECT LINE
For those who give importance to the high quality "Made in Germany", the series ZWILLING PRO is the best choice. Both for professionals and for those who love cooking: knives ZWILLING PRO is the perfect combination of innovation, traditional design and absolute precision. By Paring knife Santoku, this series offers blades suitable for all uses in the kitchen.
A collection to meet all needs in a modern kitchen: a great quality and a perfect line.

• QUALITY
The unique composition of the steel ZWILLING JA HENCKELS is the perfect balance of chromium and carbon: the secret to a high-quality steel. The knives with brand FRIODUR are the product of a special hardener cryogenic treatment that improves the quality. They have exceptional cutting, are especially corrosion-resistant and flexible.

• FEATURES:
The clean blade over the entire length allows to cut from the tip up to the node. The type of sharpening satisfies both the tradition of cutting European and Japanese.

• PRECISION:
The knives with the brand SIGMAFORGE are obtained by precision forging starting from a single piece of steel, for a perfect geometry. The basic requirement for sharpness and precision for the best cutting properties.

• HANDLING:
The wedge-shaped geometry of the blade enables an extraordinary stability and an easy cut; the curved shape of the node ensures reliable and accurate.

• HIGHLIGHT:
A classic for the professional kitchen. The 3-rivet design with tang seamless stands for perfect balance.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Official sword from the movie Clash of the Titans produced by Neca.

The film, released in the United States April 2, 2010 and in Italy from April 16, is the remake of Clash of the Titans in 1981, inspired by the greek myth hero Perseus. A little 'far from reality mythological, for purposes of the story (as it did for Troy whose director publicly stated only be "loosely based" ancient texts), some events are changed and included characters that have little to do with the film original

Blade: Steel
Handle: Metal
Blade length: 60cm.
Total length: 89cm.
Blade thickness: 7mm.
Balancing: Advanced
Weight: 2020g.
sheath:
Notes: Manufactured under license film

Intended Use: Collection

Type of production: industrial
Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
Country of manufacture: Japan
Handle: brushed titanium
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 222mm.
Weight: 119g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: leatherette zippered pouch with Spyderco logos
Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.

Neca - Clash of the Titans Perseus Sword - Prop Replica

Official sword from the movie Clash of the Titans produced by Neca.

The film, released in the United States April 2, 2010 and in Italy from April 16, is the remake of Clash of the Titans in 1981, inspired by the greek myth hero Perseus. A little 'far from reality mythological, for purposes of the story (as it did for Troy whose director publicly stated only be "loosely based" ancient texts), some events are changed and included characters that have little to do with the film original

Blade: Steel
Handle: Metal
Blade length: 49cm.
Total length: 69cm.
Blade thickness: 7mm.
Balancing: Advanced
Weight: 1540g.
sheath:
Notes: Manufactured under license film

Wusthof Ikon

Use: knife for bread and cakes
Blade length: 230mm
Tot .: length 360mm
Weight: 186gr
Type: Forged
Steel: X50 Cr Mo V 15
Handle: Wood African Blackwood
Washing: Manual - NOT DISHWASHER

Wusthof Ikon

Use: chef knife ideal for vegetables, raw meat and fish
Blade length: 160mm
Tot .: length 285mm
Weight: 178gr
Type: Forged
Steel: X50 Cr Mo V 15
Handle: Wood African Blackwood
Washing: Manual - NOT DISHWASHER

Intended use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Aluminium 6061 T6 aircraft
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 127g.
Closure: Button Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Brian Tighe, opening system with ball bearing type IKBS opening type Carson Flipper

Intended Use: sports

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel N690Co
Treatment Blade: satin
Handle: titanium, with spacers G10
Blade length: 97mm.
Blade Thickness: 4.5mm.
Length closed: -mm.
Overall length: 220mm.
Thick when closed: -mm.
Balancing: -
Weight: 216g.
Lock: Liner Lock
Clip: carbon fiber
Sheath: -
Note: Opening the system through Carson flipper - Movement opening on ball bearings - Design by Sergio Consoli

* Opening on ball bearings with system IKBS
* Thumbstud and Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
Treatment Lama: Satin
Handle: Titanium and G10 Green
Blade length: 74mm.
Blade thickness: 3.5mm.
Overall length: 175mm.
Weight: 65g.
Closure: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Packaging: -
Notes: design by Peg - opening on ball bearings IKBS

* Opening on ball bearings with system IKBS
* Thumbstud and removable Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium
* Box wood with all accessories (Torx T6, T8, Thumb Stud, Flipper, Two screws addizioniali)

Intended Use: Sport / collection

type of production: Industrial
production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
treatment Lama: Satin
manicatura: Titanium
blade length: 74mm.
blade thickness: 3.5mm.
total length: 175mm.
Weight: 74g.
Closing: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Package: Box wood with accessories
Notes: design by Molletta - opening on ball bearings IKBS

Intended use: Tactical / Collection

Type of production: Industrial
Blade Production: Italy
Blade: Stainless steel Elmax 58 / 60HRC
Blade treatment: PVD
Handle: Titanium insert in G-10
Blade length: 92mm
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 207mm.
Thick when closed without clip: 7mm.
Balancing: -
Weight: 142g.
Closure: Frame Lock
Clip: Stainless steel coated
Sheath: Design by Wilson Combat - Opening system with Carson Flipper