Knives and Flashlights
-
CRKT - Burnley Squid - 2490 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas BurnleyC2490 -
Lionsteel - T.R.E. Titanium - K390 Sprint Run - PRIVATE COLLECTION - TRE K390 - Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Not available (limited run sprint run in K390 steel).
* Sharpening: Re-sharpened
* Marks on blade: Small marks, especially near the tip, left side
* Marks on handle: Signs of wear on the titanium clip, a major scratch on the right side of the handle, above the frame
* Box: Present and original, in cardboard.
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/Collection
Type of Production: Industrial
Country of Production: Italy
Blade: In cold work tool steel Bohler K390 hardened to 64/65HRC
Blade finish: Microbead blasted and matted
Handle: Titanium
Blade length: 74mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 74g.
Closure: Titanium Frame Lock with steel clapper
Clip: Titanium 6Al4V
Packaging: Cardboard box with LionSteel logos
Notes: Opening on IKBS ball bearings with carson flipper system - DIffers from the standard model in both the steel used, the upper blade profiling, the finish of the blade, the packaging, and the lack of possibility to customize the opening system by removing the flipper - previously purchased knife from a private collectionLS-3K390 -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB -
Spyderco - Endura 4 Knife - Titanium and Damascus - C10TIPD - knife
Intended Use: Collection
Type of production: industrial
Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
Country of manufacture: Japan
Handle: brushed titanium
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 222mm.
Weight: 119g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: leatherette zippered pouch with Spyderco logos
Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.C10TIPD -
Maserin - Bulldog Flipper - Design by Sergio Consoli - 403 - knife
Intended Use: sports
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel N690Co
Treatment Blade: satin
Handle: titanium, with spacers G10
Blade length: 97mm.
Blade Thickness: 4.5mm.
Length closed: -mm.
Overall length: 220mm.
Thick when closed: -mm.
Balancing: -
Weight: 216g.
Lock: Liner Lock
Clip: carbon fiber
Sheath: -
Note: Opening the system through Carson flipper - Movement opening on ball bearings - Design by Sergio ConsoliMA-403 -
Lion Steel - T.R.E. Three Rapid Exchange - Titanium Grey - TRE BL - Knife
* Opening on ball bearings with system IKBS
* Thumbstud and removable Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium
* Box wood with all accessories (Torx T6, T8, Thumb Stud, Flipper, Two screws addizioniali)
Intended Use: Sport / collection
type of production: Industrial
production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
treatment Lama: Satin
manicatura: Titanium
blade length: 74mm.
blade thickness: 3.5mm.
total length: 175mm.
Weight: 74g.
Closing: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Package: Box wood with accessories
Notes: design by Molletta - opening on ball bearings IKBSLS-3BL -
Fox / Wilson Combat - Rapid Response Flipper Titanium Frame and G10 - FX-307G10 - knife
Intended use: Tactical / Collection
Type of production: Industrial
Blade Production: Italy
Blade: Stainless steel Elmax 58 / 60HRC
Blade treatment: PVD
Handle: Titanium insert in G-10
Blade length: 92mm
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 207mm.
Thick when closed without clip: 7mm.
Balancing: -
Weight: 142g.
Closure: Frame Lock
Clip: Stainless steel coated
Sheath: Design by Wilson Combat - Opening system with Carson Flipper10166