Coltelleria ed illuminazione

TECHNICAL DATA:
Led: 1x white light + 1x red light
Operating Modes: 4 different powers and light modes
Powers and Durations White Light: 150 Lumens (2.5h.) -> 45 Lumens (6h.)
Powers and Durations Red Light: 4 Lumens (30h. ) -> Blinking
Maximum lighting distance: 50m.
Power and luminsa selection method: Two power buttons per flashlight and infrared management system
Body and Lenses: polymer
Batteries: Built-in, non-removable 3.6V and 600mAh Li-Ion, equipped with built-in USB-C type charging system
Measurements: 5.2cm (LENGTH) - 5.9cm (WIDTH,) - 1.9cm (bracket included)
Weight: 41g. - bracket included
Accessories: front elastic headband - USB/USB-C charging cable
Waterproofness: as per IP65 standard
Impact resistance: withstands falls from 1m height
Notes: can be operated only with hand gestures, without touching it, by activating the infrared (IR) sensors built into the flashlight

FULL TECHNICAL SPECIFICATIONS:

LED: 1x Led white light; 1x Led red light, both with 50,000-hour life cycle
Output 7 digitally adjusted light modes
Powers and durations: White Light - 350 lumens (3h.) -> 100 lumens (12h.) -> 6 lumens (140h.) -> SOS -> Beacon / Red Light - 5 lumens (40h.) -> Slow Flashing
Range: up to 120m.
Peak power: 3500 candles
Batteries that can be used: 3x AAA 1.2/1.5V ministyl type or Nitecore HLB1300 battery pack (optional, sold separately)
Flashlight dimensions: 59x50x36mm. (with stand included)
Weight: 67g (with stand and elastic band included - batteries excluded)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Strap: elastic, adjustable, reflective in the dark
Notes: water resistant as per IP66 standard
Accessories Included: elastic strap - front mount tilts up to 90° - 3x disposable AAA batteries

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available NO
* Sharpness: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel
Finish: Testudo burnishing
Handle: Anodized aeronautical aluminum anticorodal
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of production

With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!

Intended Use: Sporting / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Tumbled & Satin
Handle: Anodized titanium with flamed hardware
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 11mm.
Weight: 106g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting

Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.

Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.

Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.

The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.

The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.

This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V 
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.

Intended use: Tactical/Military

Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logos

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis Iovito

KEY FEATURES:

* Ultralight AA dual-beam headlamp.
* Maximum power of 240 lumens
* Red light illumination designed to preserve night vision.
* Uses a unibody optical lens system with various facets.
* Compatible with various AA batteries, such as alkaline , Ni-MH and lithium batteries by tolerating different voltages.
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 3 brightness levels, 2 light sources and 3 special modes available.
* Made of special plastic resistant to impact and low temperatures.
* Compact and lightweight
* Shock and drop resistant up to 1 meter high.
* Waterproof and dustproof grade according to IP66 standard





FULL TECHNICAL SPECIFICATIONS:

LED: 1x White light LED; 1x Red light LED, both with 50,000-hour life cycle
Output 7 digitally adjusted light modes
Powers and durations: White Light - 240 lumens (4h.) -> 60 lumens (10h.) -> 6 lumens (400h.) -> SOS -> Beacon / Red Light - 5 lumens (10h.) -> Slow Flashing
Range: up to 90m.
Peak power: 1600 candelas
Batteries that can be used: 1x AA type 1.2/1.5V stylus
Flashlight dimensions: 61.5x36.2x28.9mm. (with stand included)
Weight: 36g (with stand and elastic band included - batteries excluded)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Strap: elastic, adjustable, lights up in the dark
Notes: water resistant as per IP66 standard
Accessories: elastic strap - front mount tiltable up to 90° - 360° rotatable multipurpose clip for attachment to various mounts

With the Boker Plus Epicenter Backlock, U.S. designer Todd Rexford has created a knife of impressive proportions that combines the irrepressible forces of nature and unleashes an uncontrollable tremor in the center of knife enthusiasts' emotions.

With the yellow and black color combination of the all-G10 shaped handle, the Epicenter ranks right at the top of the Richter scale. Only the sturdy backlock can tame the elemental force this pocket knife can generate, securely locking the blade in place.

The brass lanyard hole and the ring on the blade axis screw add to the appeal of this natural phenomenon and inevitably make your hands shake.



Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3.7mm.
Length when closed: 120mm.
Total length: 210mm.
Weight: 130g.
Clip: stainless steel, removable
Closure: Back Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Todd Rexford

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

Intended Use: Gentleman / EDC / Sporty

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Satin
Handle: G10
Blade length: 66mm.
Blade thickness: 2.7mm.
Length when closed: 92mm.
Total length: 158mm.
Weight: 49g.
Clip: -
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: Design by Alexander Krava

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stonewashed stainless steel
Blade Length: 90mm.
Blade thickness: 3.3mm.
Length when closed: 121mm.
Total length: 211mm.
Weight: 167g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Serge Panchenko

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin
Handle: G10
Blade length: 78.6mm.
Blade thickness: 4mm.
Length when closed: 108mm.
Total length: 188mm.
Weight: 135g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper Voxnaes

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.

Intended use: Collection

Type of production: Industrial
Country of production: Taiwan
Blade: in VG10 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 96mm.
Weight: 78g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Burnley

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Satin
Handle: Micarta and Steel
Blade length: 85mm.
Blade thickness: 3.9mm.
Closed length: 117mm.
Total length: 202mm.
Weight: 153g.
Clip: in stainless steel, with yellow anodization
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Jesper Voxnaes

SILENTE is the name of the knife taken from the motto "SICUT NOX SILENTES" by N.O.C.S. Central Security Operations Unit, special anti-terrorist unit of the State Police.

SILENTE was presented to the Department, the Authorities, the Minister of the Interior and the Chief of Police on the occasion of the forty-year ceremony of the foundation of the NOCS.

SILENTE is a unique model of its kind that fulfills equally unique needs: the handle is divided into two parts and creates the handle of a clamp placed in the end of the handle. With it, in addition to taking on everything that has the appropriate dimensions, it is possible to cut wire, wire, steel cables, etc. and last but not least, it can be used as a window breaker, given the tungsten carbide insert at the end.

The sheath protects the cutting edge during all these uses, allowing it to be used safely, but it can also release the blade with a fast and silent retention system. Adaptable to thigh use and applicable to the M.O.L.L.E system, it is integrated into the operator's equipment using the least possible space.

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Brunishing Mil-C-13924
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 309mm.
Weight: 338g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Notes: a multi-purpose pliers are integrated in the handle for cutting reticulated and cables or can also be used as glass breakers

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Blackwash
Handle: G10
Blade length: 83mm.
Blade thickness: 2.6mm.
Closed length: 108mm.
Total length: 184mm.
Thick when closed: 13.2mm.
Weight: 113g.
Opening: Carson Flipper system
Washers: in brass, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Kershaw logos
Notes: Design by Sinkevich

Intended use: Bushcraft / Hiking / Sport

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade finish: Satin finish
Handle: PP + TPE (polypropylene + thermobond)
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 150g.
Sheath: nylon with leather insert, belt, vertical port
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Bushcraft / Hiking / Sport

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade finish: Satin finish
Handle: PP + TPE (polypropylene + thermobond)
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 150g.
Sheath: nylon with leather insert, belt, vertical port
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Professional tool essential for maintenance and maintenance of the cutting edge of a knife.

Two grit steel, sapphire cut with square section: two fine sides (slightly knurled) and two very fine sides (completely smooth).

Handle: in synthetic material.
Total length: 44.5 cm.
Abrasive element length: 30 cm.
Weight: 396 gr.

Tips for knife maintenance

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces wire consumption. Some advices:

- Pay attention that the knives placed in the dishwasher bump into other objects; the blades could be damaged.

- The guaranteed knives for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).

- Make sure that the knives do not need to be cut to perfection, have them rectified or sharpened by professionals in the sector.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Bead Blasted
Handle: Stainless steel with PVD treatment
Blade length: 47mm.
Blade thickness: 2.8mm.
Closed length: 96mm.
Total length: 140mm.
Thick when closed: 8.7mm.
Weight: 90g.
Opening: through ambidextrous thumstood
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: bottle opener and screwdriver

Intended use: Tactical

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Black Oxyde Blackwash
Handle: G10
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 203mm.
Thick when closed: 13.8mm.
Weight: 120g.
Opening: via removable Thumb Disk
Washers: in Teflon
Closure: Liner Lock
Clip: stainless steel, removable and reversible, 2 positions
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: Design by Les George

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli

Born from the revisitation of the 39-09 model, the Nimbus was developed and chosen by the 183rd "Nembo" Paratrooper Regiment as a commemorative knife of the events of Case Grizzano which on 19 April 1945 saw the Nembo paratroopers engaged against the paratroopers of a German division . The clashes raged for 12 hours and were often resolved by hand-to-hand combat with the white weapon. A few days after the end of the Second World War one third of the battalion's men remained on the field, but their sacrifice led to the conquest of the battle. The knife in addition to wanting to commemorate an important event of our Armed Forces is the result of a development that has been carefully studied also in the technical aspects, so as to make it suitable for a concrete operational use.

Particular attention has been paid to taking care of the dimensions, the shape and the search for solutions such as the kydex sheath, which is designed to make the knife an instrument capable of adapting to the most complex requirements of the port.

The light and compact blade meets the demands of a modern tactical knife today.

Intended use: Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin finish
Handle: Wood
Blade length: 141mm.
Blade thickness: 5mm.
Total length: 263mm.
Weight: 203g.
Sheath: in Leather
Packaging: display case
Notes: -

The most popular of the Leatherman pliers is now available with a new version further improved thanks to the addition of interchangeable and resistant cutters.

Tools: Stainless Steel
Handle: Stainless Steel
Closed length: 100 mm.
Open length: 160 mm.
Weight: 238 g.
Sheath: shaped, in Leather or Cordura (according to availability), with vertical or horizontal fixing

Endowment:
Plier with thin points
Interchangeable wire cutters
Flat-blade knife
Serrated knife
File for iron
File for wood
Diamond file
Saw
Screwdriver connection
Precision screwdriver insert
Large flat screwdriver
Precision flat screwdriver
Phillips screwdriver
Precision Phillips screwdriver
19cm ruler.
Bottle opener / can opener
Cable strippers
Hole for transport

After the success of the FULCRUM multi-role knife, the bayonet version was born. Like the FULCRUM, the bayonet is an extremely robust and versatile knife, the blade holds loads at break above 150 kg, the tip is very sturdy and the profile allows it to work for a long time with the knife without affecting the sharpening of the last section , which guarantees, together with the partial dorsal sharpening, to maintain the penetration capacity necessary for hand-to-hand combat against targets covered by heavy clothing, clothing and soft ballistic protections. The advanced center of gravity and the weight of the blade make it suitable for heavy field work. NFG version (No Fixing Gears, without rifle mount).

Intended use: tactical / military / multi-role

Blade: full tang in stainless steel N690Co 58HRC
Handle: removable in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 378g.
Sheath: modular tactile with thread trimmer, thigh or belt, in Nylon and Kydex

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-3V steel
Blade finish: Gray Coated
Handle: Grivory with
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thick when closed: 10.4mm
Weight: 58.4g.
Locking system: AxisLock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -