bing

Coltelleria ed illuminazione

Shop By
Shopping Options
Brand
  1. Antonini 1item
  2. Benchmade 2items
  3. Boker 9items
  4. Consigli 6items
  5. Extrema Ratio 10items
  6. Fox Knives 1item
  7. Ka Bar 4items
  8. Nitecore 1item
  9. Opinel 1item
  10. Spyderco 1item
  11. Victorinox 1item
  12. Viper 8items
  13. Approved 3items
  14. Bastinelli Knives 1item
  15. WanderTactical 5items
Less
Stock
  1. In Stock 25items
  2. Out of Stock 29items
Rating
  1. 5
    8items
  2. 4
    & up
    20items
  3. 3
    & up
    22items
Set Ascending Direction

Items 1-48 of 54

Page
  1. Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION

    KNIFE RETIRED FROM PRIVATE COLLECTION
    * Type: Previously purchased
    * Condition: Overall in very good condition
    * Available: on the market
    * Sharpness: Factory
    * Marks on blade: none
    * Marks on handle: None
    * Box: -
    * Sheath: synthetic material case
    * Manuals, Certificates and Guarantees: guarantee certificate
    * Checked and Certified by our internal laboratory

    Intended use: Regional

    Type of production: Artisan
    Blade production: Italy
    Blade: 12c26 stainless steel
    Blade Treatment: -
    Handle: ram's horn
    Blade length: 110mm.
    Blade thickness: 3mm.
    Closed length: 147mm.
    Total length: 265mm.
    Closed thickness: 19mm
    Balancing: -
    Weight: 100g.
    Closure: without blade lock
    Clips: -
    Sheath: -
    Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
    Note: -

    AP-DR-RES-12
    €307.38
    Only 1 left
    Only 1 left
  2. Victorinox - Pioneer X Alox - Terra Marrone - Limited Edition 2024 - 0.8231.L24 - utility knife

    Alox Limited Edition 2024 of the classic Victorinox Pioneer X, multipurpose 9-function 93 mm long (closed). Alox Terra Marrone handles made of anodized aluminum and then subjected to the Eloxal process, which, using anodic oxidation, creates a protective layer that can preserve against damage and corrosion.

    The Alox Limited Edition program includes models with anodized aluminum grips in different colors, different each year: the year of the edition is marked on the grips themselves.

    Features:
    1. large blade (length 70 mm)
    2. awl reamer
    3. can opener
    4. small screwdriver (also for Phillips screws)
    5. foil remover
    6. screwdriver 
    7. wire stripper
    8. key ring
    9. scissors

    Technical details:
    Thickness: 14.9 mm
    Length: 93 mm
    Weight: 94.5 g
    Handle material: aluminum

    V-0.8231.L24
    €69.67
    Only 2 left
    Only 2 left
    Rating:
    80%
    4
  3. Viper - Katla by Vox - 3D Carbon Fiber - V5980FC3D - knife

    Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
    The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
    The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
    The flat edges and the titanium clip allow a comfortable and discreet port.


    Intended use: EDC / Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: M390 60 / 61HRC stainless steel
    Blade finish: Satin
    Handle: Carbon fiber with 3D processing
    Blade length: 82mm.
    Blade thickness: 4mm.
    Length closed: 116mm.
    Total length: 198mm.
    Weight: 122g.
    Closure: Liner Lock
    Clip: titanium
    Packaging: cardboard box with Viper logos
    Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

    V5980FC3D
    €188.52
    Only 1 left
    Only 1 left
  4. Benchmade - Freek - Satin S90V & Carbon Fiber - 560-03 - knife

    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: USA
    Blade: Stainless steel CPM-S90V (59-61 HRC)
    Blade treatment: Satin finish
    Handle: Carbon fiber with anodized aluminum spacers
    Blade length: 91mm.
    Blade thickness: 3mm.
    Length closed: 123mm.
    Total length: 215mm.
    Weight: 116g.
    Closure: Axis
    Clip: stainless steel with PVD treatment, removable
    Packaging: cardboard box with Benchmade logos

    BM-560-03
    €286.89
    Only 3 left
    Only 3 left
  5. ExtremaRatio - Misericordia Ranger - XXV Anniversarium Limited Edition - knife

    Extrema Ratio Misericordia Ranger XXV Anniversarium Limited Edition is a limited series version of only 400 pieces that preserves intact all the features of the famous Misericordia model adopted by the 4th Alpine Parachute Regiment.

    Misericordia Ranger XXV Anniversarium Limited Edition comes with 2 sheaths, both in desert color: the first, produced in kydex, offers the possibility of attachment via belt-clip, ulti-clip and malice-clip (optional accessories not included with the product). Attachment to the M.O.L.L.E. system by braiding the paracord is also possible. The second, made of high-strength Nylon, has 2 adjustable loops that allow it to be attached to M.O.L.L.E. systems.


    Intended Use: Tactical/Multi-role

    Production type: Industrial
    Country of Production: Italy
    Blade: stainless steel N690Co hardened to 58HRC
    Blade treatment: Geotech Camo (Black Warfare)
    Handle: FRN (fiberglass reinforced Nylon) with skull crasher / rear glass breaker
    Blade length: 118mm.
    Blade thickness: 4mm.
    Total length: 233mm.
    Weight: 87g.
    Sheath: double sheath: Kydex and ABS.
    Packaging: polypropylene case with Misericordia / Extrema Ratio logos and commemorative Coin
    Notes: Limited edition of only 400 pieces, numbered on box and blade to celebrate the company's 25th anniversary

    ER-MIS-RALE
    €285.25
    Only 1 left
    Only 1 left
  6. Ka-Bar BK&T - Becker Harpoon Black Survival Knife - BK18BK - knife

    Intended Use: Bushcraft / Outdoor

    Production Type: Industrial
    Country of Origin: USA
    Blade: 1095 steel at 56/58HRC
    Blade Finish: Black Coating
    Handle: Zytel
    Blade Length: 110mm.
    Blade Thickness: 4.5mm.
    Overall Length: 235mm.
    Weight: 195g.
    Sheath: Nylon and Celcon in Black
    Packaging: Cardboard box with KA-Bar logos
    Notes: Design by Ethan Becker

    Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

    KB-BK18BK
    €122.13
    Only 2 left
    Only 2 left
  7. ExtremaRatio - Misericordia Desert - single edge fixed blade knife - Made in Italy

    Extrema Ratio Misericordia Desert, which preserves intact all the features of the famous Misericordia model adopted by the 4th Alpine Parachute Regiment, derives from the commemorative dagger made on the occasion of the 140th anniversary of the 4th Alpine Regiment and the 70th since the founding of the Alpine Paratroopers.

    It is a tactical-type fixed-blade knife designed for those instances when the knife must be extremely light and compact. The new desert coloring also makes this model available in a shade in line with the most common needs of modern operational departments.

    The blade is milled from Böhler N690 steel, hardened to 58 HRC for the best balance of edge retention and strength, is 118 mm long, 4mm thick, and has a flat edge. The weight of the knife is just 87g. The profile is a spear point type, with a full-length shank that makes it even lighter and with a ¾-length false counterblade. The finish is a stone washed type.

    The knife's polymer handle features classic Extrema Ratio shells that make for a more secure grip and is attached to the tang by a through-screw. On the rear end the handle flows connecting with a wide ring equipped with a "skull crusher" appendage: a ring that allows the use of martial arts techniques and ensures the hand a very solid grip. In this version the handle is in Desert coloring.

    Since this is a knife designed for professional use, much attention has been paid to ease of carrying, accessibility and extraction in case of need. The knife is secured to the sheath by a quick-release safety that can be easily reversed for left-handed use. The sheath is also in Desert coloring, made of high-strength Nylon, very versatile and equipped with 2 adjustable loops that allow it to be attached to M.O.L.L.E systems, facilitating quick extraction in various tactical scenarios.




    Intended Use: Tactical / Multirole

    Production Type: Industrial
    Country of Production: Italy
    Blade: stainless steel N690Co hardened to 58HRC
    Blade treatment: Stonewashed
    Handle: FRN (fiberglass reinforced nylon)
    Blade length: 118mm.
    Blade thickness: 4mm.
    Total length: 233mm.
    Weight: 87g.
    Sheath: Nylon with two multi-position clips, designed for M.O.L.L.E. type attachments.
    Packaging: cardboard box with Extrema Ratio logos
    Notes: Rear Skull Crasher - Derived from the Black model, adopted by the 4th Alpine Parachute Regiment.

    ER-MIS-DE
    €159.84
    Only 1 left
    Only 1 left
    Rating:
    96%
    4.8
  8. Boker Plus - Epicenter - D2 Back Lock by Todd Rexford - 01BO545 - knife

    With the Boker Plus Epicenter Backlock, U.S. designer Todd Rexford has created a knife of impressive proportions that combines the irrepressible forces of nature and unleashes an uncontrollable tremor in the center of knife enthusiasts' emotions.

    With the yellow and black color combination of the all-G10 shaped handle, the Epicenter ranks right at the top of the Richter scale. Only the sturdy backlock can tame the elemental force this pocket knife can generate, securely locking the blade in place.

    The brass lanyard hole and the ring on the blade axis screw add to the appeal of this natural phenomenon and inevitably make your hands shake.



    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: Taiwan
    Blade: D2 steel
    Blade treatment: Satin finish
    Handle: G10
    Blade length: 88mm.
    Blade thickness: 3.7mm.
    Length when closed: 120mm.
    Total length: 210mm.
    Weight: 130g.
    Clip: stainless steel, removable
    Closure: Back Lock
    Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
    Notes: Design by Todd Rexford

    BO-01BO545
    €90.16
    Only 1 left
    Only 1 left
  9. ExtremaRatio - K1 Dobermann knife - XXV Anniversary - Limited Edition

    This special edition in 250 pieces, proposed on the occasion of the 25th anniversary of the brand, maintains the shape of the original, but with materials and finishes corresponding to the current production.

    The K1 is equipped with a modified spear point profile blade, characterized by a tip that combines the 40° "tanto" profile with the more traditional European one, creating a sharp but very solid hybrid which, with the false false edge, makes it particularly effective in jab. The bevel is high, allowing for a very effective cutting angle.

    The blade is immediately recognizable by the fenestration at the heel, which allows for considerable lightening without compromising its strength. It is made of Böhler N690 steel, with heat treatments that bring its hardness to 58 HRC for the best combination of edge hold and resistance. The finish is satin with flat grinding.

    The handle, in anodized Anticorodal alloy, compared to the original presents the lightening on the sides that make the Extrema Ratio knives immediately distinguishable, but maintains the arched shape and the lateral "bellies" of the K1, offering an excellent grip both in the "saber" than in the "reverse" grip.

    The terminal part of the handle curves to form a sort of hook which allows particularly easy and rapid extraction from the scabbard, while the tang protrudes from it with a triangular cusp which acts as a glass breaker with a slot which allows the knife to be equipped of lasso.

    The leather scabbard faithfully reproduces the original while maintaining both the qualities of ease and speed of extraction. The carry can take place in an upside-down axillary position, horizontally on the belt or tactically on the thigh.

    The K1 equipment is completed with a polypropylene case ‌, complete leather sheath and underarm shoulder strap.

    WEIGHT g.: 493
    WEIGHT OZ.: 17.39
    BLADE LENGTH (MM): 210
    BLADE LENGTH (IN): 8.26
    TOTAL LENGTH (MM): 351
    TOTAL LENGTH (IN): 13.81
    BLADE THICKNESS (MM): 6.3
    BLADE THICKNESS (IN): 0.25
    BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)
    BLADE FINISH: SATIN
    BLADE GRINDING: FLAT EDGE
    HANDLE MATERIAL: ANODIZED ANTICORODAL ALUMINUM

    ER-K1-D-LE
    €770.49
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  10. ExtremaRatio - S-Thil Black Warfare knife - XXV Anniversary Special Edition - knife

    Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.

    The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.

    The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.

    The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).

    Intended use: Tactical / Multirole

    Type of production: Industrial
    Country of production: Italy
    Blade: N690Co stainless steel hardened to 58HRC
    Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
    Handle: N690 steel
    Blade length: 119mm.
    Blade thickness: 5mm.
    Total length: 230mm.
    Weight: 123g.
    Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
    Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
    Notes: exclusive briefcase to celebrate the company's 25th anniversary

    ER-STHIL-BWLE
    €265.57
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  11. Boker Plus - Koteyka Slipjoint by Alexander Krava - 01BO641- folding knife

    Intended Use: Gentleman / EDC / Sporty

    Production type: Industrial
    Country of Production: Taiwan
    Blade: D2 steel
    Blade treatment: Satin
    Handle: G10
    Blade length: 66mm.
    Blade thickness: 2.7mm.
    Length when closed: 92mm.
    Total length: 158mm.
    Weight: 49g.
    Clip: -
    Closure: Slipjoint
    Packaging: cardboard box with Boker Plus logos
    Notes: Design by Alexander Krava

     

    BO-01BO641
    €32.79
    Only 2 left
    Only 2 left
    Rating:
    87%
    4.4
  12. Boker Plus - Evade by Serge Panchenko - 01BO384 - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Taiwan
    Blade: D2 steel
    Blade treatment: Stonewashed
    Handle: Stonewashed stainless steel
    Blade Length: 90mm.
    Blade thickness: 3.3mm.
    Length when closed: 121mm.
    Total length: 211mm.
    Weight: 167g.
    Clip: stainless steel, removable
    Closure: Frame Lock
    Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
    Notes: Design by Serge Panchenko

    BO-01BO384
    €81.15
    Only 1 left
    Only 1 left
  13. Boker Plus - Little Friend S35VN Flipper by Vox - 01BO385- knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel CPM-S35VN
    Blade treatment: Satin
    Handle: G10
    Blade length: 78.6mm.
    Blade thickness: 4mm.
    Length when closed: 108mm.
    Total length: 188mm.
    Weight: 135g.
    Clip: stainless steel, removable
    Closure: Liner Lock
    Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
    Notes: Design by Jesper Voxnaes

    BO-01BO385
    €122.95
    Only 1 left
    Only 1 left
  14. Boker Plus - Vox G10 field knife - 01BO375 - folding knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Taiwan
    Blade: D2 steel
    Blade treatment: black
    Handle: G10
    Blade length: 86mm.
    Blade thickness: 4mm.
    Closed length: 117mm.
    Total length: 201mm.
    Weight: 145 g.
    Clip: in stainless steel, with gold anodizing
    Closure: lining lock
    Packaging: cardboard box with Boker Plus logos, Nylon case with zip
    Note: design by Jesper Voxnaes

     

    BO-01BO375
    €70.49
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  15. Boker Plus - F3.5 Folder Knife Brown Micarta by Vox - 01BO338 - folding knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Taiwan
    Blade: D2 steel
    Blade treatment: Satin
    Handle: Micarta and Steel
    Blade length: 85mm.
    Blade thickness: 3.9mm.
    Closed length: 117mm.
    Total length: 202mm.
    Weight: 153g.
    Clip: in stainless steel, with yellow anodization
    Closure: Frame Lock
    Packaging: cardboard box with Boker Plus logos, Nylon case with zip
    Notes: Design by Jesper Voxnaes

     

    BO-01BO338
    €81.15
    Only 1 left
    Only 1 left
  16. Viper - Katla by Vox - 3D Satin Titanium - V5982TI3D - knife

    Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
    The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
    The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
    The flat edges and the titanium clip allow a comfortable and discreet port.


    Intended use: EDC / Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: M390 60 / 61HRC stainless steel
    Blade finish: Stonewashed
    Handle: Satinized titanium 3D processing
    Blade length: 82mm.
    Blade thickness: 4mm.
    Length closed: 116mm.
    Total length: 198mm.
    Weight: 137g.
    Closure: Liner Lock
    Clip: titanium
    Packaging: cardboard box with Viper logos
    Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

    V5982TI3D
    €180.33
    Only 1 left
    Only 1 left
  17. Viper - Katla by Vox - 3D Marbled Carbon Fiber - V5980FCM3D - knife

    Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
    The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
    The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
    The flat edges and the titanium clip allow a comfortable and discreet port.


    Intended use: EDC / Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: M390 60 / 61HRC stainless steel
    Blade finish: Satin
    Handle: Carbon fiber with 3D processing
    Blade length: 82mm.
    Blade thickness: 4mm.
    Length closed: 116mm.
    Total length: 198mm.
    Weight: 105g.
    Closure: Liner Lock
    Clip: titanium
    Packaging: cardboard box with Viper logos
    Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

    V5980FCM3D
    €188.52
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  18. Benchmade - Mini Freek knife 565-1 - Satin - Carbon Fiber - CPM-S90V - knife

    Intended use: sports / collection

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-S90V stainless steel (59-61 HRC)
    Blade treatment: satin
    Handle: Carbon Fiber
    Blade length: 76mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 179mm.
    Weight: 78g.
    Closing: Axis
    Clip: Stainless steel
    Packaging: Cardboard box with Benchmade logos
    Note: -

    BM-565-1
    €278.69
    Only 2 left
    Only 2 left
  19. Viper - Drop Montone by Fabrizio "Silvester" Silvestrelli - V5700MO knife

    Intended use: sportsman / gentleman

    Type of production: industrial
    Lama production: Italy
    Blade: Sandvik 12C27 stainless steel
    Blade treatment: -
    Handle: ram horn, with liners embedded in stainless steel
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length closed: 75mm.
    Thick when closed: 12mm.
    Total length: 125mm.
    Balancing: -
    Weight: 60g.
    Closure: Liner Lock
    Clip: -
    Sheath: black leather case
    Notes: design by Fabrizio Silvestrelli

    V5700MO
    €94.26
    Only 1 left
    Only 1 left
  20. Opinel - N ° 10 Effilé knife Beech - Knife

    Opinel - Les Effilés ash wood - 10 in stainless steel - knife

    Ranked # 10
    Type of production: industrial
    Lama production: France
    Blade: stainless steel
    Handle: in beech wood
    Blade length: 95mm.
    Blade thickness: 2mm.
    Length closed: 146mm.
    Thick when closed: 125mm.
    Total length: 225mm.
    Weight: 44g.
    Closing: viro block

    op-10effa
    €13.93
    Only 4 left
    Only 4 left
    Rating:
    100%
    5
  21. Antonini Knives - Old Bear Mushrooms knife Olive - 9387/19 - knife

    Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

    Type of production: semi-artisan
    Lama production: Italy
    Blade: Aisi 420 tempered stainless steel - HRC 54/56
    Handle: olive wood handle
    Blade length: 65mm.
    Blade thickness: 2mm.
    Length closed: 130mm.
    Thick when closed: 200mm.
    Weight: 49g.
    Closing: viro block


    Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent no.1187282, still filed in 1985 by Todesco di Maniago, an active partner. of this project) which can be activated both in the open and closed positions.

    AE-9387/19LU
    €28.69
    Only 3 left
    Only 3 left
    Rating:
    97%
    4.9
  22. Ka-Bar BK&T - Becker Harpoon Survival knife BK18 - knife

    Intended use: Bushcraft / Outdoor

    Type of production: Industrial
    Blade production: USA
    Blade: 1095 to 56 / 58HRC steel
    Blade treatment: Desert Traction Coating
    Handle: Zytel
    Blade length: 110mm.
    Blade thickness: 4.5mm.
    Length closed: -
    Total length: 235mm.
    Thick when closed: -
    Balancing: -
    Weight: 195g.
    Closing: -
    Clip: -
    Sheath: Nylon and Celcon coyote color
    Packaging: Cardboard box with KA-Bar logos
    Notes: Design by Ethan Becker

    Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

    KB-BK18
    €122.13
    Only 1 left
    Only 1 left
  23. Ka-Bar - TDI Investigator Law Enforcement - 1493 - knife

    Intended use: tactical / military

    Type of production: industrial
    Country of production: Taiwan
    Blade: full tang in AUS-8 57 / 59HRC stainless steel
    Blade treatment: nitriding
    Handle: Zytel
    Blade length: 60mm.
    Blade thickness: 3mm.
    Total length: 127mm.
    Weight: 68g.
    Sheath: in ABS with clip
    Notes: smaller version of the TDI Law Enforcement 1480 model

    KB-1493
    €53.28
    Only 1 left
    Only 1 left
    Out of stock
  24. Nitecore - NSH10 EDC Multiuse Titanium Snap Hook - carabiner - tool

    NITECORE NSH10 is a multipurpose carabiner made of TC4 titanium alloy.

    Inspired by the design of the carabiner used as essential tools for rock climbing or bungee jumping, the NSH10 is a reliable tool for fixing or hanging external objects. Comfortable and versatile, it can be used as a key ring, bottle opener, hanging hook or flathead screwdriver.

    Type of production: industrial
    Country of production: China

    Functions:

    * keychain
    * bottle opener
    * hook
    * open parcels
    * flathead screwdriver

    Material: titanium
    Length and width: 49mm x 25.5mm
    Thickness: 3.8mm
    Weight: 7.5g

    NI-NSH10
    €11.07
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  25. ExtremaRatio - Frame Rock Titan - Black DLC - folding knife

    The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

    The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.

    Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.

    To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.

    The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.

    Intended use: collection / CQD

    Type of production: industrial
    Blade: in N690Co stainless steel
    Blade treatment: Black DLC
    Country of production: Italy
    Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
    Blade length: 75mm.
    Blade thickness: 6.3mm.
    Total length: 181mm.
    Weight: 193g.
    Clip: stainless steel, reversible, deep pocket type and with tip up port
    Notes: Conical Skull Crasher inserted in the shank
    Box: in ABS with Extrema Ratio logos

    ER-FRTI-BK
    €457.38
    Only 99 left
    Only 99 left
    Rating:
    90%
    4.5
  26. ExtremaRatio - Frame Rock Titan - Blue Satin - folding knife

    The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

    The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.

    Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.

    To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.

    The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.

    Intended use: collection / CQD

    Type of production: industrial,
    Blade: in N690Co stainless steel
    Blade treatment: Satin finish
    Country of production: Italy
    Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
    Blade length: 75mm.
    Blade thickness: 6.3mm.
    Total length: 181mm.
    Weight: 193g.
    Clip: stainless steel, reversible, deep pocket type and with tip up port
    Notes: Conical Skull Crasher inserted in the shank
    Box: in ABS with Extrema Ratio logos

    ER-FR-BS
    €454.92
    Only 99 left
    Only 99 left
  27. Viper - Katla Knife by Vox - Damascus - Dark Matter Carbon Fiber - Limited Edition - VA5980FCM - Knife

    Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which brings back the Tanto profile blade with a bevel that enhances the excellent cutting qualities.

    The rotation mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.

    The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern way, the inlays of the classic Viper models.

    The flat edges and the titanium clip allow for comfortable and discreet carry.

    Intended use: EDC / Sport

    Type of production: Industrial
    Country of production: Italy
    Blade: Super Dense Twist stainless Damascus
    Blade finish: Satin
    Handle: Dark matter carbon fiber
    Blade length: 82mm.
    Blade thickness: 4mm.
    Closed length: 116mm.
    Total length: 198mm.
    Weight: 122g.
    Lock: Liner Lock
    Clip: Titanium
    Packaging: Deluxe cardboard box with Viper logos
    Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearing - Damascus SSCT spacer - limited edition of 100 pieces

    VA5980FCM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  28. Viper - Katla by Vox - Black Canvas Micarta - V5982CB - knife

    Katla, designed by Jesper Voxnaes, is a liner lock folding knife, featuring a Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.

    The rotating mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.

    The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern key, the inlays of the classic Viper models.

    The flat edges and the titanium clip allow for comfortable and discreet carry.

    Intended use: EDC / Sport

    Type of production: Industrial
    Country of production: Italy
    Blade: Stainless steel M390 60/61HRC
    Blade finish: Stonewashed
    Handle: Walnut
    Blade length: 82mm.
    Blade thickness: 4mm.
    Closed length: 116mm.
    Total length: 198mm.
    Weight: 107g.
    Lock: Liner Lock
    Clip: Titanium
    Packaging: Cardboard box with Viper logos
    Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearing

    V5985NO
    €163.11
    Only 0 left
    Only 0 left
    Out of stock
  29. Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife

    Intended use: sporting/collection
    Type of production: artisan
    Blade production: Italy
    Blade: Stainless steel X50CrMoV15
    Blade treatment: -
    Handle: Raw ox horn
    Blade length: 70mm.
    Blade thickness: 1,6mm.
    Length closed: 90mm.
    Total length: 160mm.
    Weight: 53g.
    Closure: without blade lock
    Packaging: cardboard box
    Sheath: -

    Craftsmanship is beautiful because it is varied

    The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

    50307
    €49.18
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  30. Wander Tactical - Lynx knife - Raw & Brown Micarta - D2 - custom knife

    The Wander Tactical Lynx knife is an excellent option for anyone looking for a robust and reliable knife. The blade is made of D2 steel, which offers good resistance to wear and corrosion. The length of the blade is approximately 10cm and has a clip point shape, making it ideal for many outdoor activities.

    The handle of the knife is made of micarta, a resistant and non-slip material that offers excellent grip even in humid or sweaty conditions. The length of the handle is approximately 12cm which gives a good balance to the knife, making it easy to handle and control.

    The Lynx knife comes with a Kydex sheath, which protects and keeps it safe during transport. In addition, the cover can be easily attached to a belt or trousers thanks to its quick fastening system.

    Overall, the Wander Tactical Lynx knife is an excellent choice for anyone looking for a reliable and durable knife for outdoor activities. With its sturdy blade, non-slip handle and Kydex sheath, the Lynx knife is a very attractive option for hikers, campers and outdoor enthusiasts.

    Intended use: utility / bushcraft

    Type of Production: Artisanal
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finish: Raw Finish
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balance: backwards
    Weight: 260g.
    Sheath: kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted

    WT-LY-RBM23
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  31. ExtremaRatio - S-Thil Stone Washed - knife

    Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.

    The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.

    That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.

    The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.

    The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.


    Intended Use: Tactical/Multi-role

    Production type: Industrial
    Country of manufacture: Italy
    Blade: stainless steel N690Co hardened to 58HRC
    Blade treatment: Stonewashed
    Handle: Steel N690Co 58HRC
    Blade length: 119mm.
    Blade thickness: 5mm.
    Total length: 230mm.
    Weight: 123g.
    Sheath: Nylon
    Packaging: cardboard box with Extrema Ratio logos
    Notes: -

    ER-STHIL-SW
    €160.66
    Only 0 left
    Only 0 left
    Rating:
    80%
    4
    Out of stock
  32. Bastinelli Knives - Picoeur Black knife Doug Marcaida - Scalpel Karambit Neck Knife

    Destinazione d'uso: Neck Knife

    Tipo di produzione: Industriale
    Paese di produzione: Maniago, Italia, by Fox Cutlery
    Lama: acciaio inox N690Co
    Trattamento lama: Black Cerakote
    Impugnatura: acciaio inox N690Co
    Lunghezza lama: 40mm.
    Spessore lama: 3.8mm.
    Lunghezza totale: 138mm.
    Peso: 30g.
    Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
    Confezione: Scatola di cartone con loghi Bastinelli Knives
    Note: Prodotto in Italia da Fox Cutlery

    BC-07B
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  33. ExtremaRatio - Misericordia Black Warfare - XXV Anniversary Limited Edition - knife

    Special limited edition model created on the occasion of the XXV Anniversary of Extrema Ratio

    Extrema Ratio Misericordia Black Warfare is a version in a limited series of only 500 pieces that preserves intact all the features of the famous Misericordia model adopted by the 4th Alpine Parachute Regiment, which helped develop and test the product and chose it for its unique characteristics that make it particularly suitable for ambush combat.

    The blade is milled from Böhler N690 steel, hardened to 58 HRC for the best balance of edge retention and strength, is 118mm long, 4mm thick, and has a flat edge. The weight of the knife is just 87g. It has a spear-point profile, with a full-length shank that makes it even lighter, features ¾-length false counter-wire, and has a Black Warfare finish, with the innovative and original Extrema Ratio Geotech Camo pattern, made by laser engraving.

    The handle retains the unmistakable Extrema Ratio ergonomic profile, and is made of fiberglass-filled nylon to ensure absolute robustness in all conditions, even in the heaviest of uses. The distinctive ring on the bottom of the grip aids hand grip by allowing the soldier a greater and firmer lunge, exponentially increasing the combat potential of the Misericordia.

    The Kydex scabbard offers belt-clip, ulti-clip and malice-clip attachment options. In addition, it is possible to attach the scabbard to the M.O.L.L.E. system by braiding the paracord lanyard. The Misericordia Black Warfare comes in an IP67-certified watertight Polypropylene technical case, with pressurization valve, weatherproof, dustproof and shockproof, inside of which is also the Kydex sheath, double UTLICLIP, double-grit sharpening plate (ceramic abrasive and synthetic diamond) and metal plaque with the progressive number of the limited series.



    Intended Use: Tactical/Multi-role

    Production Type: Industrial
    Country of manufacture: Italy
    Blade: stainless steel N690Co hardened to 58HRC
    Blade treatment: Geotech Camo (Black Warfare)
    Handle: FRN (fiberglass reinforced Nylon) with rear skull crasher / glass breaker
    Blade length: 118mm.
    Blade thickness: 4mm.
    Total length: 233mm.
    Weight: 87g.
    Sheath: Kydex, with double multi-position ULTICLIP attachment clip
    Packaging: polypropylene case with Extrema Ratio logos
    Notes: Limited edition of only 500 pieces, numbered on box and blade to celebrate the company's XXV anniversary

    ER-MIS-BWLE
    €0.00
    Rating:
    93%
    4.7
    Out of stock
  34. Andrea Pizzadili - Pattada 23cm Sardinian mouflon horn - PRIVATE COLLECTION - handcrafted knife

    Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory

     


    Intended Use: Regional Italian / Collection

    Type of production: Artisan
    Country of Production: City of Pattada, Sardinia, Italy
    Blade: 420 stainless steel
    Blade finish: satin-finished
    Handle: Sardinian mouflon horn and alpaca
    Blade length: 105mm.
    Blade thickness: 2.5mm.
    Length closed: 125mm.
    Total length: 230mm.
    Thickness when closed: 17mm.
    Weight: 74g.
    Closing mechanism: -
    Clip: -
    Sheath: -
    Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
    Notes: knife withdrawn from private collection, mint condition, like new

    AP-PATMU-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  35. ExtremaRatio - Frame Rock Titan Knife - Blue Satin - PRIVATE COLLECTION - folding knife

    Knife withdrawn from a private collection - In like new condition - Never regrind - Checked and certified by our in-house Coltelleria Collini laboratory.

    The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

    The Extreme Ratio Frame Rock is characterized by a titanium handle that offers great resistance while being very light. The integrity of the frame-lock system is guaranteed against wear by an easily replaceable hardened steel insert.

    Unlike its drop-point predecessor, the Rock frame has a 75mm long, 6.0mm thick spearpoint blade fitted with a fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available with a black finish with DLC treatment or satin.

    To make opening even more fluid and without uncertainty, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to obtain the release of the blade from the closed position.

    The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large and solid handle and the well-proportioned blade allow this knife to tackle heavy tasks. The Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. Comes inside an ABS box.

    Intended use: collection / CQD

    Type of production: industrial,
    Blade: N690Co stainless steel
    Blade treatment: Satin finish
    Country of production: Italy
    Handle: Titanium, machined from solid, with integral Frame Lock closure system with removable flap and safety made of stainless steel
    Blade length: 75mm.
    Blade thickness: 6.3mm.
    Total length: 181mm.
    Weight: 193g.
    Clip: stainless steel, reversible, deep pocket type and with tip up port
    Notes: Conical Skull Crasher inserted in the tang
    Box: in ABS with Extrema Ratio logos

     

    AP-ER-FR-BS
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  36. Boker Plus - Aphex Mini knife by Burnley - 01BO197 - folding knife

    The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.

    Intended use: Collection

    Type of production: Industrial
    Country of production: Taiwan
    Blade: in VG10 steel
    Blade treatment: Satin
    Handle: titanium with carbon fiber insert
    Blade length: 78mm.
    Blade thickness: 3mm.
    Closed length: 130mm.
    Total length: 96mm.
    Weight: 78g.
    Clip: titanium
    Closure: Frame Lock
    Packaging: cardboard box with Boker Plus logos, Nylon case with zip
    Notes: Design by Burnley

    BO-01BO197
    €135.25
    Only 0 left
    Only 0 left
    Out of stock
  37. Wander Tactical - Lynx - Raw & Brown Micarta - custom knife

    Intended Use: utility / bushcraft

    Type of Production: Artisan
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finish: Raw Finish
    Handle: Micarta
    Blade Length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balance: backward
    Weight: 260g.
    Sheath: kydex
    Package: -
    Notes: Each knife is unique and handcrafted

    WT-LY-RBM
    €278.69
    Only -50 left
    Only -50 left
    Out of stock
  38. Boker Plus - Burnley 2020 Collection knife - 01BO2020 - folding knife

    2020 limited edition knife, designed by Lucas Burnley.

    Intended use: Collection

    Type of production: Industrial
    Country of production: Taiwan
    Blade: M390 steel
    Blade treatment: Satin
    Handle: titanium with carbon fiber insert
    Blade length: 100mm.
    Blade thickness: 3.9mm.
    Closed length: 130mm.
    Total length: 230mm.
    Weight: 173 g.
    Clip: titanium
    Closure: Frame Lock
    Packaging: cardboard box with Boker Plus logos, Nylon case with zip
    Note: Burnley design

    BO-01BO2020
    €258.20
    Only -99 left
    Only -99 left
    Out of stock
  39. ExtremaRatio - Misericordia - 4th Alpine Paratroopers Regiment - tactical knife

    The Extrema Ratio Misericordia was adopted by the 4th Alpine Paratroopers Regiment which helped develop and test the product. It is a tactical fixed blade knife, extremely light and compact, it can be used both as a main knife or as a backup blade.

    The blade is made of Böhler N690 steel, heat-treated to a hardness of 58 HRc, it is 118 mm long, 4mm thick and has a flat edge.

    The profile is of the spear point type, with a full length fuller which makes the blade even lighter and with a false counter-thread at ¾ length. The blade is available with the classic Extrema Ratio MIL-C-13924 black finish.

    The handle in fiberglass-reinforced nylon (FRN) features the classic Extrema Ratio recesses that make the grip safer and is fixed to the tang by means of a through screw.

    On the rear end the handle flows connecting with a large ring, which allows the use of martial arts techniques and ensures a very solid grip to the hand, equipped with a "skull crusher" appendix in hard metal.

    The overall weight of the knife is just 87g. Being a knife designed for professional use, much attention has been paid to ease of port, accessibility and extraction in case of need. The knife is secured to the sheath by a quick-release safety catch that can be easily reversed for use by left-handers.

    The sheath is made of highly resistant Nylon, it is very versatile and two adjustable loops allow it to be fixed inside the loops of M.O.L.L.E.

    The sheath is equipped with a conical invitation to facilitate the re-insertion of the knife while a simple pressure on the trigger safety allows it to be extracted quickly and instinctively.

     

    Intended use: Tactical / Multirole

    Type of production: Industrial
    Country of production: Italy
    Blade: in N690Co stainless steel hardened to 58HRC
    Blade treatment: MIL-C-13924 burnishing
    Handle: Forprene
    Blade length: 118mm.
    Blade thickness: 4mm.
    Total length: 233mm.
    Weight: 87g.
    Sheath: in Nylon with two multi-position clips, designed for M.O.L.L.E.
    Packaging: Cardboard box with Extrema Ratio logos
    Notes: Rear Skull Crasher - Adopted by the 4th Alpine Paratroopers Regiment.

    ER-MIS-BK
    €162.30
    Only 0 left
    Only 0 left
    Rating:
    99%
    5
    Out of stock
  40. Fox - Suru by Vox - Sprint Run - SanMai SPG2 Powder Steel - FX-526SAN - knife

    With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a multi-award-winning model like the Suru with a Japanese powder steel (sintered) and laminate (SanMai) by Takefu Steel.

    For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and durability of the sharpening, while simultaneously guaranteeing a remarkable resilience and resistance to oxidation. given by the lamination process of the blade.

     

    Intended use: Sports / Collection

    Type of production: Industrial
    Country of production: Italy
    Blade: in Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
    Blade treatment: Satin finish
    Handle: Stonewashed aluminum
    Blade length: 60mm.
    Blade thickness: 4mm.
    Length closed: 88m.
    Total length: 148mm.
    Thick when closed: 11mm
    Weight: 84g.
    Closure: Frame Lock with stainless steel door
    Clip: flush, removable, stainless steel
    Packaging: Cardboard box with Fox Knives logos
    Notes: Opening via Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Aluminum version of the SURU Carbon Fiber model, winner of the 2018 Blade Show as "Overall Knife of the Year" - Exclusive version of Collini Cutlery, Sprint Run, with Takefu Steel SPG2 Laminate Japanese stainless steel.

     

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    - Longer tool life
    thanks to the use of high quality steel with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the outer layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic rendering
    The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    FX-526SAN
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  41. Ka-Bar BK&T - Becker Magnum Camp Knife - BK5 - knife

    Intended use: Hiking / Heavy Utility

    Type of production: Industrial
    Blade production: USA
    Blade: 1095 to 56 / 58HRC steel
    Blade treatment: Black Traction Coating
    Handle: Zytel
    Blade length: 203mm.
    Blade thickness: 5mm.
    Total length: 343mm.
    Weight: 337g.
    Sheath: ABS and Nylon
    Packaging: Cardboard box with KA-Bar logos
    Notes: Design by Ethan Becker

    Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

    KA-BK5
    €81.15
    Out of stock
  42. Spyderco - Canis by Kelly McCann - C248CF - knife

    Kelly McCann is one of the world's foremost experts on counter-terrorism, counter-terrorism, close combat and all aspects of security. His decades of real-world operational experience are clearly reflected in the Canis, a no-frills folding knife optimized for personal protection.

    Its extraordinary CPM® S30V® stainless steel blade combines a Wharncliffe style design with a reinforced tip and a central blade wedge to reduce weight and maximize cutting power.
    The ergonomic handle features carbon fiber and G-10 scales with layered weft, drowned stainless steel liners, high-strength compression closure and a versatile four-position clip that supports all possible transport options.


    Intended use: Tactical / EDC

    Type of production: Industrial
    Country of production: Taiwan
    Blade: CPM-S30V stainless steel
    Blade treatment: Satin finish
    Handle: Carbon Fiber and G10 with liners embedded in stainless steel
    Blade length: 87mm.
    Blade thickness: 3mm.
    Length closed: 120mm.
    Total length: 206mm.
    Thick when closed: 11mm.
    Weight: 116g.
    Closing: Front Lock
    Clip: multi-position, stainless steel, removable and reversible
    Packaging: cardboard box with Spyderco logos
    Notes: Design by Kelly McCann

    C248CF
    €225.41
    Only -99 left
    Only -99 left
    Out of stock
  43. Viper - Katla by Vox - Black Canvas Micarta - V5982CB - knife

    Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
    The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
    The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
    The flat edges and the titanium clip allow a comfortable and discreet port.


    Intended use: EDC / Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: M390 60 / 61HRC stainless steel
    Blade finish: Stonewashed
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 4mm.
    Length closed: 116mm.
    Total length: 198mm.
    Weight: 107g.
    Closure: Liner Lock
    Clip: titanium
    Packaging: cardboard box with Viper logos
    Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

    V5982CB
    €151.64
    Only 0 left
    Only 0 left
    Rating:
    80%
    4
    Out of stock
  44. Deroma - Pattada knife craft knife in ram's horn - 27cm - craft knife

    Intended use: Regional

    Type of production: Artisan
    Lama production: Italy
    Blade: 12c26 stainless steel
    Blade treatment: -
    Handle: ram horn
    Blade length: 110mm.
    Blade thickness: 3mm.
    Length closed: 150mm.
    Total length: 270mm.
    Thick when closed: 19mm
    Balancing: -
    Weight: 105g.
    Closing: without blade lock
    Clip: -
    Sheath: -
    Packaging: rigid packaging with artisan production certificate signed by Antonio Deroma
    Note: -

    DR-RES-27
    €307.38
    Only -50 left
    Only -50 left
    Rating:
    80%
    4
    Out of stock
  45. Viper - Drop Tulipano by Fabrizio "Silvester" Silvestrelli - 5700TW knife

    Intended use: sportsman / gentleman

    Type of production: industrial
    Lama production: Italy
    Blade: Nitro-B stainless steel
    Blade treatment: -
    Handle: in tulip, with liners embedded in stainless steel
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length closed: 75mm.
    Thick when closed: 12mm.
    Total length: 125mm.
    Balancing: -
    Weight: 60g.
    Closure: Liner Lock
    Clip: -
    Sheath: black leather case
    Notes: design by Fabrizio Silvestrelli

    5700TW
    €86.07
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  46. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Desert Micarta - coltello custom

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT-D
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  47. Boker Plus - F3.5 Folder Frame Lock by Vox - 01BO335 - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Taiwan
    Blade: in steel D2
    Blade treatment: Satin
    Handle: G10 and stainless steel
    Blade length: 85mm.
    Blade thickness: 3.9mm.
    Closed length: 117mm.
    Total length: 202mm.
    Weight: 159g.
    Clip: stainless steel, with blue anodizing
    Closure: Frame Lock
    Packaging: cardboard box with Boker Plus logos, Nylon case with zip
    Notes: Design by Jesper Voxnaes

    BO-01BO337
    €57.38
    Only -99 left
    Only -99 left
    Rating:
    87%
    4.4
    Out of stock
  48. Wander Tactical - Lynx knife - Row & Micarta Desert - custom knife

    Type of production: Artisan
    Lama production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Row Finish
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balancing: backward
    Weight: 260g.
    Sheath: kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the product photographed.

     

    WT-LY-RF
    €237.70
    Only -50 left
    Only -50 left
    Out of stock
Set Ascending Direction

Items 1-48 of 54

Page




ecommerce sicuro