bing

Coltelleria ed illuminazione

Shop By
Shopping Options
Brand
  1. Extrema Ratio 1item
  2. WanderTactical 4items
Less
Stock
  1. In Stock 1item
  2. Out of Stock 4items
Rating
  1. 4
    & up
    1item
Set Ascending Direction

5 Items

  1. ExtremaRatio - 185° RAO - 2018 Version - heavy folding knife

    New version 2018 with improved grip: uses the same handle as the RAO II model

    Folding knife made to specific requests of the Italian Army department 185 ° RAO (Regiment Acquisition Objectives) and currently supplied to the homonymous department. The supplied knife differs from the civil one only because of the total lack of writing or logos on the blade.

    HISTORICAL SUMS ON THE DEPARTMENT:
    The 185 ° RAO of the '' Folgore '' is a department with an ancient tradition, but very new. In fact, it was born on April 3, 2000 following the reconfiguration of the 185th terrestrial paratroop artillery regiment. Based in Livorno, it is an atypical department of the artillery weapon, currently inserted in the Special Forces basin.

    Entirely composed of voluntary personnel, the 185th RAO selects its components through the passing of a physical test and a qualification course on modules '' with increasing difficulty ''. The tasks entrusted to the RAO's men are many, but all very delicate: it is about gathering information on enemy objectives and 'passing them' to one's command. More generally, it can talk about '' recognition in sensitive areas ''. '' It is therefore evident - they stress to the Army - that the activity of the acquirer takes place mainly in hostile territory, in small self-sufficient nuclei that act in isolation ''.

    RAO paratroopers are specialists in '' infiltration and exfiltration '' techniques and are able to move in the operating area '' for up to 8-10 days without external supplies ''. They know how to 'escape from capture, escape and escape from an' enemy controlled area '' and, above all, as '' identify, determine and evaluate objectives '' of strategic interest. Since 2002, the year of reconfiguration, the 185th Regiment detachments have operated in all the hottest operational theaters: from the Balkans to Afghanistan, to Iraq. Here they mainly carry out surveys for medium and long-range information purposes and for monitoring the area of ​​responsibility of the Italian contingent.

    Destination of use: military / tactical

    Type of production: industrial
    Lama production: Italy
    Blade: stainless steel N690Co 58 / 60HRC
    Blade treatment: burnishing MIL-C 13924
    Handle: 4.5mm anticorodal aluminum anodized
    Blade length: 118mm.
    Blade thickness: 6.3mm.
    Length closed: 142mm.
    Total length: 261mm.
    Weight: 335g.
    Closure: modified front lock with additional threaded security pin
    Clip: absent
    Sheath: tactical Nylon compatible M.O.L.L.E. suitable both for the closed and open knife
    Notes: diamond pocket sharpener included

    ER-RAO-BK
    €326.23
    Only 1 left
    Only 1 left
    Rating:
    96%
    4.8
  2. Wander Tactical - Raptor - Satin SanMai CoS & Paracord - PRIVATE COLLECTION - craft knife

    Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

    In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

    Use: Neck Knife / Collection

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
    Blade treatment: Satin
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Total length: 175mm.
    Balancing: backward
    Weight: 156g.
    Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
    Packaging: -
    Notes: Each knife is unique and handcrafted

     


    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer life of the cutting edge
    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    AP-WT-COS-RA-W
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  3. Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife

    In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

     

    Use: Neck Knife / Collection

    Type of production: handmade
    Production Country: Italy
    Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
    Blade treatment: Satin
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Overall length: 175mm.
    Balancing: backward
    Weight: 156g.
    Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
    Packaging: -
    Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

    WT-COS-RA-O
    €196.72
    Out of stock
  4. Wander Tactical - Scrambler - Satin SanMai Cos & Gray Paracord - custom knife

    In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

    Occupation: EDC / Light Utility / All Round

    Type of production: Custom
    Country of production: Italy
    Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
    Blade treatment: Satin Raw
    Handle: Paracord
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Overall length: 200mm.
    Balancing: backward
    Weight: 215g.
    Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
    Packaging: -
    Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

    WT-SC-PA
    €229.51
    Out of stock
  5. Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife

    In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

     

    Use: Neck Knife / Collection

    Type of production: handmade
    Production Country: Italy
    Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
    Blade treatment: Satin
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Overall length: 175mm.
    Balancing: backward
    Weight: 156g.
    Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
    Packaging: -
    Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

    WT-COS-RA-W
    €196.72
    Only -50 left
    Only -50 left
    Out of stock
Set Ascending Direction

5 Items





ecommerce sicuro