Coltelleria ed illuminazione

Coltelleria Sportiva e da Collezione, illuminazione, torce, LED, spade e collezionismo, Novità di novembre 2017

ExtremaRatio - BF1CD - Damascus Coreless - Limited Edition - knife

Purpose of use: Collection / Sportsman

Type of production: Sprint Run, Industrial, Open Number
Country of production: Prato - Italy
Blade: Coreless Steel VG10 / VG2 61HRC made in Japan by Takefu Steel
Blade treatment: chemical detection
Handle: Anodized aluminum anticorodal
Blade Length: 70mm.
Blade thickness: 2.5mm.
Closed length: 99mm.
Total Length: 168mm.
Closure thickness: 11mm.
Weight: 84g.
Opening: ambidextrous opening pin
Washers: in fiberglass
Closure: Liner Lock
Clip: stainless steel, deep pocket, removable and reversible
Packing: Cardboard box with Extrema Ratio logos - Numbered guarantee certificate
Notes: Limited edition - Each specimen is numbered on the grip and on the internal warranty certificate - Exclusive Product of Coltelleria Collini

ABOUT THE STEEL

More than just a damask, Coreless steel made by Japanese Takefu Steel comes with over 70 layers of VG10 and VG2 stainless steel welded, forged and coated between them so that you can form a lightweight, slim and durable blade with a spectacular damask outer pattern.

The peculiarity of Coreless steel, unlike conventional rolled steel or Japanese San-Mai, is that it does not have a hard core steel that is used for the cutting edge but has both the VG10 and VG2 steels arranged to form the cutting edge so alternating and sequential to each other.

This particular construction gives the blade - compared to the two steels that make it, individually taken - greater resistance to oxidation, higher surface hardness (up to 61.5HRC), 25% more than cutting capacity, 25% more than the wire hold capacity and 25% more resilience making the blade more robust and less subject to breakage.

Thanks to this latest steel, Takefu Steel has been rewarded on Japanese territory for research and development and innovation in the cutting-edge landscape. Coreless steel has already been chosen by major brands such as Kai and Mcusta Zanmai who since 2017 proposed it on their top productions of professional kitchen knives.

€192.62
Fuori Produzione / Discontinued
Notify when available

Article code: ER-BF1CD-C
- Add to Wishlist
- | Add to Compare
ExtremaRatio - BF1CT - Damascus Coreless - Limited Edition - knife

Purpose of use: Collection / Sportsman

Type of production: Sprint Run, Industrial, Open Number
Country of production: Prato - Italy
Blade: Coreless Steel VG10 / VG2 61HRC made in Japan by Takefu Steel
Blade treatment: chemical detection
Handle: Anodized aluminum anticorodal
Blade Length: 70mm.
Blade thickness: 2.5mm.
Closed length: 99mm.
Total Length: 168mm.
Closure thickness: 11mm.
Weight: 84g.
Opening: ambidextrous opening pin
Washers: in fiberglass
Closure: Liner Lock
Clip: stainless steel, deep pocket, removable and reversible
Packing: Cardboard box with Extrema Ratio logos - Numbered guarantee certificate
Notes: Limited edition - Each specimen is numbered on the grip and on the internal warranty certificate - Exclusive Product of Coltelleria Collini

ABOUT THE STEEL

More than just a damask, Coreless steel made by Japanese Takefu Steel comes with over 70 layers of VG10 and VG2 stainless steel welded, forged and coated between them so that you can form a lightweight, slim and durable blade with a spectacular damask outer pattern.

The peculiarity of Coreless steel, unlike conventional rolled steel or Japanese San-Mai, is that it does not have a hard core steel that is used for the cutting edge but has both the VG10 and VG2 steels arranged to form the cutting edge so alternating and sequential to each other.

This particular construction gives the blade - compared to the two steels that make it, individually taken - greater resistance to oxidation, higher surface hardness (up to 61.5HRC), 25% more than cutting capacity, 25% more than the wire hold capacity and 25% more resilience making the blade more robust and less subject to breakage.

Thanks to this latest steel, Takefu Steel has been rewarded on Japanese territory for research and development and innovation in the cutting-edge landscape. Coreless steel has already been chosen by major brands such as Kai and Mcusta Zanmai who since 2017 proposed it on their top productions of professional kitchen knives.

1 Review(s)

€192.62
Fuori Produzione / Discontinued
Notify when available

Article code: ER-BF1CT-C
- Add to Wishlist
- | Add to Compare
Wander Tactical - Hurricane TI Folder - Black Micarta - folding knife

Article on reservation - available from December 15, 2017

Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 109mm.
Blade thickness: 5mm.
Closed length: 145mm.
Total length: 250mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

€274.59
PREORDER - SU PRENOTAZIONE
Notify when available

Article code: WT-HTIF-BL
- Add to Wishlist
- | Add to Compare
Wander Tactical - Mistral TI Folder - Black Micarta - folding knife

Article on reservation - available from December 15, 2017

Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

€274.59
Venduto - Sold
Notify when available

Article code: WT-MTI-BL
- Add to Wishlist
- | Add to Compare

Wander Tactical - Hurricane TI Folder - Desert Micarta - custom knife

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: artisan blade and handle - industrial folders
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Raw
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 214mm.
Thick when closed: -mm.
Balancing: -
Weight: 182g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: Custom Edition unique piece

€393.44
Venduto - Sold
Notify when available

Article code: WT-HUR-DE
- Add to Wishlist
- | Add to Compare
Timberline - Neeley Specwar Navy Seal Knife - PRIVATE COLLECTION - knife

Coming from a private collection, this famous and rare Timberline model produced in 1995 was born from the collaboration between Ernie Emerson and Vaughn Neeley. In 1995 he won, at Atanta's Blade Show, as "American Made Knife of the Year". Globally in perfect condition, never sharpened and used. No box.

Intended use: collection
Type of production: industrial
Blade: ATS34 stainless steel
Blade treatment: Black-Ti Coate
Lama production: USA
Handle: fiberglass reinforced nylon
Blade length: 150mm.
Blade thickness: 5mm.
Length closed: -
Total length: 300mm.
Balancing: on the guard branch
Weight: 326g.
Sheath: in polymers
Notes: No box - Product out of production
Send feedback
History
Saved
Community

€0.00
Venduto - Sold
Notify when available

Article code: TIM-SPEC
- Add to Wishlist
- | Add to Compare
KA-BAR - Adventure Potbelly knife - 5600 - PRIVATE COLLECTION - knife

Knife withdrawn by private - Overall in excellent condition, never used - Perfect thread - Complete with everything, scabbard and backup skinner knife - Checked and certified by our internal laboratory Collini Cutlery - Without packaging

Intended use: Machete / Utility

Blade: 1095 56 / 58HRC carbon steel
Country of production: USA
Finish: Teflon coating
Handle: nylon
Blade length: 182mm.
Blade thickness: 6.3mm.
Total length: 323mm.
Balancing: backward
Weight: 520g.
Sheath: cordura with skinner knife inserted in a pocket of the sheath

€0.00
Venduto - Sold
Notify when available

Article code: KB-5600
- Add to Wishlist
- | Add to Compare
Sog - Seal Team knife 2000 - S37 Japan - PRIVATE COLLECTION - knife

Knife withdrawn from a private collection. Rare knife produced by SOG in Seki in Japan between 1997 and 2007 and officially supplied to the US Navy Seals department - The knife is in excellent condition with perfect thread but without original box. Certified by our internal Collini Cutlery laboratory.

Intended use: Sports / Collection

Type of production: Industrial
Blade production: JAPAN
Blade: AUS-6 stainless steel
Blade treatment: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balancing: on the guard branch
Weight: 359g.
Sheath: in kydex

€0.00
Venduto - Sold
Notify when available

Article code: SOG-NS-CP
- Add to Wishlist
- | Add to Compare

Wander Tactical - Franken Raw Redsun Knife - copper - PRIVATE COLLECTION - custom knife

Knife withdrawn from private collection in like new condition, original sharpening - Complete with original box and certificate - Checked and certified by our Collini Cutlery internal laboratory.

Unique piece produced by the Wander Tactical, characterized by an exclusive "cut off" blade shape and by the handle with copper grips. Knife entirely handmade.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: handmade blade and handle - industrial folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw Redsun
Handle: titanium briefcases with copper handle
Blade length: 90mm.
Blade thickness: 5.5mm.
Length closed: 120mm.
Total length: 214mm.
Thick when closed: -mm.
Balancing: -
Weight: 298g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing time: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Note: -

€0.00
Venduto - Sold
Notify when available

Article code: WT-CUS-CP
- Add to Wishlist
- | Add to Compare
Conaz Consigli Scarperia - Zuava ox horn - cm 19 - 50077 - knife

Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.

3 Review(s)

€114.75
Article code: R-ZVC19
- Add to Wishlist
- | Add to Compare
Ka-Bar - Mark I - Kraton- 2221 - knife

Purpose: Sport / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Teflonatura
Handle: Kraton
Blade Length: 130mm.
Blade thickness: 3.5mm.
Total Length: 235mm.
Weight: 250g.
Sheath: in FRN (fiberglass reinforced nylon)
Packing: Cardboard box with Ka-Bar logos
Notes: -

€73.77
Article code: KB-2221
- Add to Wishlist
- | Add to Compare
ExtremaRatio - Defender Stone Washed - Knife

Combat version of the Scout model with ultra-slim shape. The 103 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Total length: 217mm.
Weight: 136g.
Sheath: Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

€172.95
Shipped in 7/10 days (subject to availability in the manufacturer's warehouses)
Article code: ER-DEFSW
- Add to Wishlist
- | Add to Compare

ExtremaRatio - Defender DG Stone Washed - Knife

Combat version of the Scout model with ultra-slim shape. The 103 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Total length: 217mm.
Weight: 140g.
Sheath: Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

€177.05
Article code: ER-DEFDGSW
- Add to Wishlist
- | Add to Compare
ExtremaRatio - Defender Black - Knife

Combat version of the Scout model with ultra-slim shape. The 103 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: MIL-C-13924 PVD
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Total length: 217mm.
Weight: 136g.
Sheath: Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

€195.08
Article code: ER-DEFBL
- Add to Wishlist
- | Add to Compare
ExtremaRatio - Defender DG Black - Knife

Combat version of the Scout model with ultra-slim shape. The 103 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: MIL-C-13924 PVD
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Total length: 217mm.
Weight: 140g.
Sheath: Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

€197.54
Article code: ER-DEFDGBL
- Add to Wishlist
- | Add to Compare
Maserin - Croz - Micarta Green - 976/MCV - knife

Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.

It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.

For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.

Purpose: Hunting / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Micarta
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.

1 Review(s)

€118.85
Disponibile in 10/15gg (previa disponibilità nei magazzini del produttore)
Article code: M-976/MCV
- Add to Wishlist
- | Add to Compare

Maserin - Croz - Micarta Green - 976/MCV - knife

Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.

It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.

For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.

Purpose: Hunting / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Black G10
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.

3 Review(s)

€118.85
Article code: M-976/G10N
- Add to Wishlist
- | Add to Compare
Sog - Seal Team - S37-K - knife

Blade: AUS-8 HRC 57/58 stainless steel

Handle: Zytel
Length Blade: 180 mm.
Thickness Blade: 5 mm.
Total length: 310 mm.
Weight: 292 g.
Fodero: Kydex

€135.25
Notify when available

Article code: SOG-S37K
- Add to Wishlist
- | Add to Compare
ExtremaRatio - Defender 2 Stone Washed - Knife

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 140g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

€177.87
Article code: ER-DEF2SW
- Add to Wishlist
- | Add to Compare
ExtremaRatio - Defender 2 DG Stone Washed - Knife

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 146g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

1 Review(s)

€180.33
Shipped in 7/10 days (subject to availability in the manufacturer's warehouses)
Article code: ER-DEF2DGSW
- Add to Wishlist
- | Add to Compare

ExtremaRatio - Defender 2 Black - Knife

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade treatment: MIL-C-13924 grinding
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 140g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

1 Review(s)

€198.36
Article code: ER-DEF2BL
- Add to Wishlist
- | Add to Compare
ExtremaRatio - Defender 2 DG Black - Knife

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade treatment: MIL-C-13924 grinding
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 146g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

€200.82
Notify when available

Article code: ER-DEF2DGBL
- Add to Wishlist
- | Add to Compare
Ka-Bar - Jarosz Turok Tactical Knife - 7503 - knife

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

€127.05
Notify when available

Article code: KB-7503
- Add to Wishlist
- | Add to Compare
Benchmade - Mini Loco Black Axis Knife G-10 - 818BK - knife

Intended use: Tactical / EDC

Type of production: Industrial
Country of Origin: USA
Blade: Steel CPM-S30V 58 / 60HRC
Surface treatment: Black PVD
Handle: Black G10
Blade Length: 8.6mm.
Blade thickness: 3.7mm.
Closed length: 111mm.
Overall length: 193mm.
Closed thickness: 15mm.
Weight: 127g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packing: Cardboard box with Benchmade logos
Notes: -

€196.72
Article code: BM-818BK
- Add to Wishlist
- | Add to Compare

Ka-Bar - Jarosz Globetrotter Tactical Knife - 7502 - knife

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: Ultramid
Blade Length: 89mm.
Blade thickness: 4.2mm.
Overall length: 192mm.
Balance: backward, 2 cm from the lower guard branch
Weight: 181g.
Sheath: in Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Jesse Jarosz

€86.07
Article code: KB-7502
- Add to Wishlist
- | Add to Compare
Ka-Bar - Snody Big Boss - 5102 - Knife

Purpose of use: Outdoor / Utility

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Satin
Handle: Zytel interchangeable in Blue Reptile or Purple Dolla Holla
Blade Length: 116mm.
Blade thickness: 4.8mm.
Overall length: 228mm.
Balance: backward, 1 cm from the lower guard branch
Weight: 181g.
Sheath: in leather
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Mike Snody - Schmuckatelli Coat Powder Coat - Coordinated Paracord

Regular Price: €168.03

P. Sconto €151.23
Article code: KB-5102
- Add to Wishlist
- | Add to Compare
Boker - Pietra per affilare 09BO195 - Grana 600-1500 - accessori coltelli

Pietra sintetica, ad acqua, per affilare. Doppia grana (600 e 1500), dotata di supporto in gomma antiscivolo.

Dimensioni:
lunghezza 180 x larghezza 60 x altezza 30 mm - Peso: 574g.

Livello qualitativo: molto buono

€30.74
Notify when available

Article code: BO-09BO195
- Add to Wishlist
- | Add to Compare
Boker - Pietra per affilare 09BO196 - Grana 2000/5000 - accessori coltelli

Pietra sintetica, ad acqua, per affilare. Doppia grana (2000 e 5000), dotata di supporto in gomma antiscivolo.

Dimensioni:
lunghezza 180 x larghezza 60 x altezza 30 mm - Peso: 490g.

Livello qualitativo: molto buono

€47.13
Notify when available

Article code: BO-09BO196
- Add to Wishlist
- | Add to Compare

Boker - Pietra per affilare 09BO197 - Grana 3000/8000 - accessori coltelli

Pietra sintetica, ad acqua, per affilare. Doppia grana (3000 e 8000), dotata di supporto in gomma antiscivolo.

Dimensioni:
lunghezza 180 x larghezza 60 x altezza 30 mm - Peso: 456g.

Livello qualitativo: molto buono

1 Review(s)

€51.23
Article code: BO-09BO197
- Add to Wishlist
- | Add to Compare
Ka-Bar - John Ek Commando Knife Model 5 - EK45 - knife

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

€118.85
Article code: KB-EK45
- Add to Wishlist
- | Add to Compare
Wander Tactical - Hurricane TI Folder - Desert Micarta - folding knife

Article on reservation - available from December 15, 2017

Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

€274.59
PREORDER - SU PRENOTAZIONE
Notify when available

Article code: WT-HTIF-DE
- Add to Wishlist
- | Add to Compare
Viper - Larius by Silvestrelli - Black G10 Stone Washed - V5960GB - knife

Purpose: sport / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 102g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Regular Price: €163.11

P. Sconto €149.80
Article code: V5960GB
- Add to Wishlist
- | Add to Compare

Viper - Larius by Silvestrelli - Carbon Fiber Satin - V5958FC - knife

Purpose: sport / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: carbon fiber with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 94g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Regular Price: €176.23

P. Sconto €149.80
Article code: V5958FC
- Add to Wishlist
- | Add to Compare
Viper - Larius by Silvestrelli - Titanium Satin - V5958TI - knife

Purpose of use: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Titanium with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 146g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

€188.52
Article code: V5958TI
- Add to Wishlist
- | Add to Compare
Ka-Bar - Jarosz Choppa Machete - 7507 - knife

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

€122.13
Article code: KB-7507
- Add to Wishlist
- | Add to Compare
Ka-Bar - Adventure Parangatang Machete - 5603 - knife

Intended use: Machete

Blade: carbon steel 1095 56 / 58HRC
Country of production: USA
Finishing: Teflonatura
Handle: GFN-PA66 polymer
Blade length: 359mm.
Blade thickness: 5mm.
Total length: 498mm.
Balancing: advanced
Weight: 589g.
Sheath: cordura, with vertical belt attachments

€86.07
Article code: KB-5603
- Add to Wishlist
- | Add to Compare

Ka-Bar - Neck Knife - 1117 - Knife

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: -
Blade Length: 98mm.
Blade thickness: 3.1mm.
Total length: 200mm.
Balance: advanced, 1 cm from the lower guard branch
Weight: 68g.
Sheath: ABS, neck, compatible M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Note: -

1 Review(s)

€53.28
Article code: KB-1117
- Add to Wishlist
- | Add to Compare