bing

Coltelleria ed illuminazione

Shop By
Shopping Options
Brand
  1. Benchmade 1item
  2. Extrema Ratio 3items
  3. Lion Steel 3items
  4. Maserin 4items
  5. Sanelli 5items
  6. Spyderco 1item
  7. Zero Tolerance 3items
  8. Approved 5items
  9. Freeman Outdoor Gear 1item
  10. Hollywood Collectibles Group 1item
  11. Pohl Force 2items
  12. Rockstead 1item
  13. WanderTactical 29items
Less
Stock
  1. In Stock 13items
  2. Out of Stock 47items
Rating
  1. 5
    4items
  2. 4
    & up
    12items
Set Ascending Direction

60 Items

  1. Wander Tactical - Hurricane Knife Compound - Raw - Black Micarta - Artisanal Knife

    Intended use: Tactical / Multirole

    Type of production: Artisanal
    Country of production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finish: Raw
    Handle: Micarta
    Blade length: 110mm
    Blade thickness: 5mm
    Total length: 250mm
    Balance: Rearward
    Weight: 295g
    Sheath: Thermoformed Kydex
    Packaging: Certificate of warranty and authenticity
    Note: Knife entirely handcrafted

    WT-HUR-RBM
    €352.46
    Only 1 left
    Only 1 left
  2. Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife

    A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.

    A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.

    Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.


    Intended use: sub/sporting

    Type of production: industrial
    Country of manufacture: Japan
    Blade: nitrogen steel H1
    Blade finish: satin-finished
    Handle: FRN
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 175mm.
    Thickness when closed: 15mm.
    Weight: 54g.
    Closure: Back Lock
    Clip: removable, stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    SC88SYL
    €130.33
    Only 1 left
    Only 1 left
  3. Rockstead - Chou knife HPC Red Silk - USED - Neck Knife - Knife

    Withdrawn knife from a private collection - Used, globally in good condition. Scratches on the blade - Checked, sharpened and certified by our internal laboratory Collini Cutlery.

    Blade: Hitachi YXR7 65HRC steel with HPC treatment
    Handle: hand-tied weave
    Blade length: 45 mm.
    Blade thickness: 4 mm.
    Total length: 120 mm.
    Weight: 60 g.
    Sheath: from the neck, in Kydex
    Notes: Accompanied by silk bag and warranty certificate with technical specifications

    With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

    Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.

    RO-CHU-U
    €229.51
    Only 1 left
    Only 1 left
  4. Zero Tolerance - ZT0230 - Jens Anso - Carbon Fiber SlipJoint - knife

    Intended use: EDC / Gentleman

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-20CV stainless steel
    Blade treatment: Stonewashed
    Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
    Blade length: 66mm.
    Blade thickness: 3mm.
    Length closed: 94mm.
    Total length: 157mm.
    Thick when closed: 10mm
    Weight: 51g.
    Closure: SlipJoint
    Clip: -
    Packaging: cardboard box with Zero Tolerance logos
    Notes: Design by Jens Anso

    ZT0230
    €209.02
    Only 1 left
    Only 1 left
  5. Sanelli - Jolly - Curved vegetable knife 7cm - 331207.N - kitchen knife

    The Sanelli Jolly Curved Vegetable Knife, model 331207.N, is a kitchen knife designed specifically to tackle vegetable cutting. This knife features a curved blade with a length of 7 centimeters, making it ideal for peeling small vegetables such as carrots, potatoes and tomatoes.

    The knife is made of high-quality materials to ensure durability, sharpness and precision. The blade is made of hardened stainless steel, making it resistant to corrosion and rust. This ensures that the knife keeps its sharp edge for a long period of time and requires little effort to cut.

    The knife's handle is made of durable material and provides a comfortable and secure grip during use. The ergonomic design of the handle reduces hand fatigue and provides optimal control while cutting.

    Blade length: 7 cm.

    Color: black

    Usage: rigid blade knife, ideal for peeling fruits and vegetables.

    Handle: polypropylene with non-slip texture.

    Jolly line.

    Six models of small, versatile knives designed for every use in the kitchen. Practical, handy, always sharp, suitable for amateur or professional use.

    The blade features a micro-serrated edge that gives greater ease of use and durability.

    The series is completed by two knives with a smooth blade, indispensable for peeling and carving fruit and vegetables.

    331207
    €5.74
    Only 75 left
    Only 75 left
  6. Sanelli - Jolly - Table knife 12cm - 333211.N - micro serrated - kitchen knife

    The Sanelli Jolly table knife, model 3332.11.N, is a kitchen knife with a blade length of 12 centimeters. This knife is especially suitable for cutting and serving meat, cheese, bread and other foods during meals.

    The blade of the Jolly Table Knife has a micro serrated edge, which allows it to easily tackle foods with a crust or tougher skin effortlessly. The serrated edge provides extra grip and facilitates precise cutting, allowing for even, clean slices.

    The knife is made of high-quality materials to ensure durability and performance. The blade is made of hardened stainless steel, which makes the knife resistant to corrosion and rust. In addition, the handle is made of a durable material that provides a secure and comfortable grip during use.

    Blade length: 12 cm.

    Color: black

    Use: ideal for cutting meat, pizza, cheese and fruit.

    Blade: semi-rigid and serrated with a rounded tip.

    Handle: polypropylene with non-slip texture.

    Jolly line.

    Six models of small, versatile knives designed for every use in the kitchen. Practical, handy, always sharp, suitable for amateur or professional use.

    The blade features a micro-serrated edge that gives greater ease of use and durability.

    The series is completed by two knives with a smooth blade, indispensable for peeling and carving fruit and vegetables.

    333211
    €6.97
    Only 24 left
    Only 24 left
    Rating:
    93%
    4.7
  7. Sanelli - Jolly - Steak knife 12cm - 332212.N - micro serrated - kitchen knife

    The Sanelli Jolly Rib Knife, model 3322.12.N, is a kitchen knife designed specifically for cutting and serving steaks and chops. This knife features a 12-centimeter long blade with a micro serrated edge.

    The serrated edge of the Jolly Rib Knife makes it easy to tackle tougher cuts of meat, such as steaks and chops, effortlessly. The micro serrated edge provides greater grip on the meat and facilitates precise cutting, allowing for even, clean slices.

    The knife is made of high-quality materials to ensure durability and reliable performance. The blade is made of hardened stainless steel, making it resistant to corrosion and rust. In addition, the handle is made of a durable material that provides a secure and comfortable grip during use.

    Blade length: 12 cm.

    Color: black

    Use: steak, pizza, tomato and bread.

    Blade: semi-rigid, serrated and pointed.

    Handle: polypropylene with non-slip texture.

    Jolly line.

    Six models of small, versatile knives designed for every use in the kitchen. Practical, handy, always sharp, suitable for amateur or professional use.

    The blade features a micro-serrated edge that gives greater ease of use and durability.

    The series is completed by two knives with a smooth blade, indispensable for peeling and carving fruit and vegetables.

    332212
    €6.97
    Only 29 left
    Only 29 left
  8. Sanelli - Jolly - Tomato knife 12cm - 3342.12.N - micro serrated - kitchen knife

    The Sanelli Jolly Knife Tomato Knife 12cm (3342.12.N) is a specialized tool designed to tackle cutting tomatoes effectively. This kitchen knife features a blade length of 12 cm, ideal for handling tomatoes of various sizes.

    The blade of the knife is made of high-quality stainless steel, which offers good corrosion resistance and maintains lasting sharpness. The main feature of this knife is the micro serrated edge on the blade, which makes it easy to tackle the skin of the tomato without crushing it.

    The handle of the knife is made of durable synthetic material, which provides excellent grip and control during use. The ergonomic shape of the handle fits comfortably in the hand, allowing precise and safe handling.

    Blade length: 12 cm.

    Color: black

    Blade: semi-rigid and serrated, great for tomatoes and bread.

    Handle: polypropylene with non-slip texture.

    Jolly line.

    Six models of small, versatile knives designed for every use in the kitchen. Practical, handy, always sharp, suitable for amateur or professional use.

    The blade features a micro-serrated edge that gives greater ease of use and durability.

    The series is completed by two knives with a smooth blade, indispensable for peeling and carving fruit and vegetables.

    334212.N
    €5.74
    Only 18 left
    Only 18 left
  9. Lionsteel - M4 - M390 Steel & Natural Canvas Micarta - M4CVN - Knife

    Intended use: Light Utility / Hiking

    Type of production: Industrial
    Country of production: Italy - Maniago
    Blade: full tang, in M390 stainless steel 60 / 61HRC
    Blade treatment: Satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 4mm.
    Total length: 205mm.
    Weight: 180g.
    Sheath: in leather, made in Italy
    Packaging: Cardboard box with Lion Steel logos
    Note: version available from November 2019 with micarta handle (previously available only in wood or G10) - Design by Molletta

    LS-M4CVN
    €162.30
    Only 1 left
    Only 1 left
  10. Lionsteel - M4 - M390 Steel & Green Canvas Micarta - M4CVG - knife

    Intended use: Light Utility / Hiking

    Type of production: Industrial
    Country of production: Italy - Maniago
    Blade: full tang, in M390 stainless steel 60 / 61HRC
    Blade treatment: Satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 4mm.
    Total length: 205mm.
    Weight: 180g.
    Sheath: in leather, made in Italy
    Packaging: Cardboard box with Lion Steel logos
    Note: version available from November 2019 with micarta handle (previously available only in wood or G10) - Design by Molletta

    LS-M4CVG
    €162.30
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  11. LionSteel - Gitano knife - Titanium and Micarta - GT01-CVG - knife

    "My idea behind the Gitano was to make a folding knife that is based on old south european folding knives in a new style. What I like about these knives is its elegant lines and often large blades in relation to the handles". Gudy van Poppel
     
    LionSteel loved Gudy 's idea and decided to start this new collaboration with him and Tools For Gents that helped us to devolope the final versions. Gitano is an E.D.C. (Every Day Carry) folding knife that joined the "Tradition by LionSteel" collection.
     
    Gitano comes with a Niolox stailess steel satin blade. It is available with 6AI4V titanium bolsters and liners, while the scales can be made of olive wood, santos wood, green canvas, black G10 or carbon fiber.
     
    For its light weight and average dimensions, Gitano is the new elegant slip-point knife to carry with you in every situation.


    Intended use: Gentleman / EDC

    Type of production: Industrial
    Country of production: Italy
    Blade: Stainless steel Niolox 59 / 60HRC
    Blade treatment: Satin finish
    Handle: Titanium 6Al4V and micarta
    Blade length: 80mm.
    Blade thickness: 2.5mm.
    Closed length: 105mm.
    Total length: 190mm.
    Thick when closed: 12mm.
    Weight: 76g.
    Closure: SlipJoint
    Clip: -
    Sheath: -
    Packaging: cardboard box with LionSteel logos
    Note: -

    LS-GT01CVG
    €120.49
    Only 2 left
    Only 2 left
    Rating:
    98%
    4.9
  12. ExtremaRatio - MF2 Rough knife - folding knife

    Intended use: Tactical / Fighter

    Type of production: Industrial
    Lama production: Italy
    Blade: Stainless steel N690Co 58HRC
    Blade treatment: Testudo
    Handle: Rough Anticorodal
    Blade length: 115mm.
    Blade thickness: 4mm.
    Length closed: 155mm.
    Total length: 263mm.
    Thick when closed: 24mm.
    Balancing: -
    Weight: 195g.
    Closure: Liner Lock
    Clip: Stainless Steel
    Sheath: -
    Packaging: black cardboard box with Extrema Ratio logos
    Note: -

    4352R
    €307.38
    Only 98 left
    Only 98 left
    Rating:
    93%
    4.7
  13. Sanelli - Jolly - Paring knife 11cm - 335211.N - micro serrated - kitchen knife

    Paring knife 11 black
    Blade length: 11 cm.
    Black colour
    The versatile knife, developed for every use in the kitchen.
    Practical, easy to handle, always sharp.
    Polypropylene handle with non-slip texture.

    Jolly Line
    Six models of small versatile knives, designed for any use in the kitchen. Practical, easy to handle, always sharp, suitable for amateur or professional use.

    The blade is characterized by a micro-serration that gives greater ease of use and durability.

    The series is completed by two knives with smooth blades, essential for peeling and engraving fruit and vegetables.

    335211
    €4.84
    Only 45 left
    Only 45 left
    Rating:
    100%
    5
  14. Wander Tactical - Smilodon - Raw D2 & Brown Micarta - custom knife

    Intended Use: Excursionism / Heavy Duty

    Type of production: Handcrafted
    Country of Production: Italy
    Blade: D2 steel at 59/61HRC
    Blade Finish: Raw Finish
    Handle: Micarta
    Blade Length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 340mm.
    Balance: backward
    Weight: 729g.
    Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt oaxant
    Packaging: warranty certificate
    Notes: Each knife is unique and handcrafted in every part

    WT-SMI-RBM
    €482.79
    Only 0 left
    Only 0 left
    Out of stock
  15. Gerber - Applegate Fairbairn Knife - PRIVATE COLLECTION - 5780 - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Type: Previously Purchased
    Conditions: in excellent conditions
    Available in the market: NO
    Sharpening: Original
    Marks on blade: NO
    Marks on handle: NO
    Packaging: NO, without original box
    Checked and Certified by our internal laboratory
    Intended use: Tactical/Military

    Blade: in 154CM stainless steel
    Blade Production: USA
    Handle: Zytel
    Blade Length: 95mm.
    Blade Thickness: 3mm.
    Closed Length: 125mm.
    Total Length: 220mm.
    Balancing: -
    Weight: 113g.
    Closure: Liner Lock
    Clip: -
    Sheath: -
    Notes: without box

    AP-GE-APP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  16. Wander Tactical - Hurricane Compound - Raw & Micarta Black - custom made knife

    Intended Use: Tactical / Multirole

    Type of production: Handcrafted
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finish: Raw
    Handle: Micarta
    Blade length: 110mm.
    Blade thickness: 5mm.
    Total length: 250mm.
    Balance: backward
    Weight: 295g.
    Sheath: made of thermoformed Kydex
    Packaging: certificate of guarantee and authenticity
    Notes: knife made entirely by hand

    WT-HUR-CRB
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  17. Wander Tactical - Smilodon - Smoke Gray Limited Edition - handcrafted knife

    The Smilodon, commonly known as the saber-toothed tiger, was an extinct large feline that lived during the Pleistocene, between 2.5 million and 10,000 years ago. It was a member of the felid family and was distinguished by its unique features, particularly its huge saber-shaped upper canines.

    The Smilodon was larger than present-day tigers, with a length of about 1.6-1.8 meters and a height at withers of about 1 meter. Its weight could range from 200 to 400 kilograms. The Smilodon's most distinctive feature were its upper canines, which could reach a length of more than 20 centimeters. These canines were extremely sharp and adapted for grasping and stinging prey. Smilodon is believed to have been a specialized predator, hunting large mammals such as Pleistocene herbivores. Its hunting technique was probably based on a powerful pounce and the use of its canines to maul the throat of prey. It is likely that its powerful bite was capable of severely damaging the bones of its victims.

    Despite its impressive appearance, Smilodon was not closely related to present-day tigers, but represented a separate evolutionary branch. It is thought to have become extinct due to climate change and the disappearance of its main prey at the end of the Pleistocene.


    Exclusive knife in entirely handmade "Smoke Gray" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.

    Intended Use: Excursionism / Heavy Duty

    Type of production: Handcrafted
    Country of production: Italy
    Blade: D2 steel at 59/60HRC
    Blade finish: Smoke Gray
    Handle: Micarta
    Blade Length: 190mm.
    Blade thickness: 6.5mm.
    Total length: 365mm.
    Balance: backward
    Weight: 682g.
    Sheath: made of Kydex, thermoformed
    Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
    Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.

    WT-SMI-SG
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  18. Zero Tolerance - ZT0223 - Tim Galyean Military Flipper - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: In like-new condition
    * Commercially available Discontinued as of 2022
    * Sharpening: Factory
    * Marks on blade: None
    * Marks on handle: None
    * Box: Present (but from a different ZT knife).
    * Scabbard: -
    * Manuals, Certificates and Warranties: -
    * Checked and Certified by our in-house laboratory

    Intended Use: Tactical / Sporting / Collection

    Type of Production: Industrial
    Country of Production: USA
    Blade: Stainless steel CPM-20CV
    Blade Treatment: Black DLC
    Handle: Titanium Black DLC and G10
    Blade length: 89mm.
    Blade thickness: 4mm.
    Length closed: 128mm.
    Total length: 218mm.
    Thickness when closed: 14mm.
    Weight: 134g.
    Closure: Framelock
    Clip: Removable, reversible, stainless steel
    Packaging: cardboard box with Zero Tolerance logos
    Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

    Translated with DeepL

    ZT0223CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  19. Hollywood Collectibles Group - Rambo 5 knife - Last Blood BOWIE - knife

    Original and official reproduction under film license of the knife used in the Rambo film - Last Blood

    Intended use: Survival/Collection
    Blade: 420 stainless steel.
    Handle: synthetic
    Blade length: 200mm.
    Blade thickness: 5.5mm.
    Total length: 360mm.
    Balancing: advanced
    Weight: 650.
    Sheath: in leather
    Notes: Standard Edition - Official product with Lionsgate cinema licenses

    RB9416
    €212.30
    Only -1 left
    Only -1 left
    Out of stock
  20. Wander Tactical - Smilodon knife Black Blood & Green Micarta - handcrafted knife

    Intended use: Hiking / Heavy Duty

    Type of production: Artisanal
    Country of production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finish: Black Blood
    Handle: Micarta
    Blade length: 190mm.
    Blade thickness: 6.5mm.
    Total length: 365mm.
    Balance: backwards
    Weight: 682g.
    Sheath: in Kydex, thermoformed
    Packaging: Certificate of guarantee
    Notes: Each knife is unique and handcrafted in every part

    WT-SMI-BB-M
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  21. Wander Tactical - Lynx knife - Raw finish & Brown Micarta - custom knife

    Intended use: Utility / Collection

    Type of production: Artisanal
    Country of production: Italy
    Blade: D2 steel at 59/60HRC
    Blade treatment: Raw Finish
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balance: backwards
    Weight: 318g.
    Sheath: in kydex
    Packaging: without packaging - supplied with Wander Tactical certificate of authenticity and guarantee
    Notes: Each knife is unique and handcrafted, custom version with WT and DP hallmark; there may be slight differences in finishes, colors and materials compared to the product photographed.

    WT-LY-RF-BM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  22. Cold Steel - Ti-Lite 6" - CTS-XHP Aluminum - 26ACSTX - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially available: Discontinued, replaced by new variants in different steels
    * Sharpening: Factory sharpened
    * Marks on blade: No
    * Marks on handle: No
    * Box: Yes, original, in perfect condition
    * Scabbard: -
    * Manuals, Certificates and Warranties: - -
    * Checked and Certified by our in-house laboratory



    Intended Use: Tactical / Collection 

    Production Type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel CTS-XHP
    Blade treatment: Microbead blasted
    Handle: Duralumin A7075 
    Blade length: 152mm.
    Blade thickness: 4mm.
    Length closed: 178mm.
    Total length: 330mm.
    Thickness when closed: 22mm.
    Weight: 258g.
    Closure: LinerLock type
    Clip: removable, painted stainless steel
    Notes: discontinued knife, like new, withdrawn from private collection

    CS26ACSTX-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  23. Wander Tactical - Smilodon - Raw & Green Micarta - custom knife

    Intended Use: Excursionism / Heavy Duty

    Type of production: Handcrafted
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finish: Row Finish
    Handle: Micarta
    Blade Length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 340mm.
    Balance: backward
    Weight: 605g.
    Sheath: Kydex
    Packaging: warranty certificate
    Notes: Each knife is unique and handcrafted in every part

    WT-SMI-RG
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  24. Wander Tactical - Lynx Clip Knife - Black Blood & Black Micarta - custom knife

    Type of production: Artisan
    Production Lama: Italy
    Blade: D2 steel at 59 / 60HRC
    Blade treatment: Black Blood
    Handle: Micarta
    Blade length: 110mm.
    Blade thickness: 5mm.
    Total length: 236mm.
    Balancing: set back
    Weight: 274g.
    Sheath: in kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences

    WT-LYC-BM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  25. Wander Tactical - Raptor Knife - Raw Finish & Desert Paracord - custom knife

    Use: Neck Knife / Collection

    Type of production: handmade
    Country of production: Italy
    Blade: full tang, D2 steel
    Blade Finish: Raw
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 5.5mm.
    Total length: 180mm.
    Weight: 130g.
    Sheath: Thermoformed Kydex
    Packaging: -
    Notes: -

    WT-RRA-DE
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  26. Wander Tactical - Raptor Raw Finish knife - Green Paracord - craft knife

    Use: Neck Knife / Collection

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, D2 steel
    Blade treatment: Raw Finish
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Total length: 180mm.
    Balancing: set back
    Weight: 130g.
    Sheath: in Kydex, thermoformed
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographed

    WT-RRA-GR
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  27. Wander Tactical - Lynx Knife - Ice Brush Black Micarta - custom knife

    Type of production: Artisan
    Production Lama: Italy
    Blade: D2 steel at 59 / 60HRC
    Blade treatment: Ice Brush Tiger
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 238mm.
    Balancing: set back
    Weight: 264g.
    Sheath: in ckydex
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences

    WT-LY-BF-1
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  28. Wander Tactical - Lynx DT Knife - Raw & Black Micarta - Custom Knife

    Intended use: Utility / Collection

    Type of production: Artisan
    Country of production: Italy
    Blade: D2 steel at 59 / 60HRC
    Blade treatment: Raw
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 238mm.
    Balancing: set back
    Weight: 293g.
    Sheath: in Kydex
    Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-LY-DT-B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  29. Wander Tactical - Smilodon - Copper Brush & White G-10 - PRIVATE COLLECTION - handcrafted knife

    Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.

     

    Type of Production: Handcrafted
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finish: Copper Brush
    Handle: G-10
    Blade Length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 340mm.
    Balance: backward
    Weight: 605g.
    Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
    Packaging: -
    Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent condition

    AP-SMIL-CBWG10
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  30. Wander Tactical - Smilodon knife Raw Finish - Brown Wood - PRIVATE COLLECTION - handmade knife

    Knife withdrawn from a private collection in excellent condition, re-sharpened - Complete with original certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

    Type of production: Artisan
    Production Lama: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Row Finish
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 340mm.
    Balancing: set back
    Weight: 605g.
    Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
    Packaging: -
    Note:

    AP-SMIL-BW
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  31. Strider Knives - AR Tiger Stripe - Flat G10 Scales S30V by Paul Bos - PRIVATE COLLECTION - knife

    Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

     


    Intended Use: Tactical

    Manufacturing Type: Mid Tech (semi-craft)
    Country of Production: USA
    Blade: Stainless steel CPM-S30V hardened by Paul Bos
    Blade Treatment: Tiger Stripe
    Handle: G10 flat with 2mm titanium liners
    Blade length: 103mm.
    Blade thickness: 5mm.
    Length closed: 137mm.
    Total length: 240mm.
    Thickness closed: 18mm.
    Weight: 228g.
    Closure: Liner Lock
    Clip: Titanium 
    Package: Nylon pouch with zipper 
    Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

    ST-AR-CPR
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  32. Wander Tactical - Centuria - Serial X - Prototype Limited Edition - custom knife

    Dino Picco, knife maker and lead designer of Wander Tactical, has created a limited edition of only 10 different prototypes of the new fixed blade model Centuria, which smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

     


    Intended Use: Collection

    Type of production: Custom
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Raw
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 5.5mm.
    Total length: 315mm.
    Balance: Advanced
    Weight: 393g.
    Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
    Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
    Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

    WT-CE-PR-X
    €655.74
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  33. Wander Tactical - Lynx Bushmann - Raw & Black Micarta - custom knife

    Intended Use: Utility / Collection

    Production type: Handmade
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Raw
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 6mm.
    Total length: 235mm.
    Balance: backward
    Weight: 319g.
    Sheath: brown leather
    Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-LY-BUSB
    €323.77
    Only -50 left
    Only -50 left
    Out of stock
  34. Wander Tactical - Lynx - Marble & Brown Micarta - custom knife

    Intended Use: Utility / Collection

    Kind of production: Handmade
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Treatment: Marble
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total lenght: 235mm.
    Balance: backward
    Weight: 289g.
    Sheath: Kydex
    Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
    Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.

    WT-LY-MABR
    €286.89
    Only -50 left
    Only -50 left
    Out of stock
  35. Wander Tactical - Lynx knife Iron Washed & Micarta Desert - custom knife

    Intended use: Utility / Collection

    Type of production: Artisan
    Country of production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Iron Washed
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balancing: set back
    Weight: 289g.
    Sheath: in leather
    Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-LYNX-BB
    €217.21
    Out of stock
  36. Wander Tactical - Godfather knife - SanMai V-Toku2 & Black Micarta - Unique piece

    In collaboration with Wander Tactical, a unique and exclusive piece to collect, the Godfather model, in a satin blade version with San Mai Japanese steel blade produced by Takefu Steel.
    This time, in the rich catalog of products offered by them, we have chosen a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless)
    Blade treatment: satin
    Handle: Micarta
    Blade length: 235mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: backward
    Weight: 700g.
    Sheath: in black leather

    WT-GF-SM
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  37. Maserin - Reactor knife - Blue G10 - Design by Nicolai Lilin - 681 / G10B - knife

    Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

    Intended use: sports collection

    Type of production: industrial
    Country of production: Italy
    Blade: in D2 steel
    Surface treatment: stonewashed
    Handle: titanium frame with G10 handle
    Blade length: 100mm.
    Blade thickness: 4mm.
    Closed length: 135mm.
    Total length: 243mm.
    Closed thickness: 14mm.
    Weight: 154g.
    Closure: Framelock with removable stainless steel leaf
    Clip: removable and reversible, in stainless steel
    Sheath: -
    Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

    681/G10B
    €162.30
    Only 0 left
    Only 0 left
    Out of stock
  38. Deroma - Pattada handmade knife in ram's horn - handmade knife

    Intended use: collection / sports

    Type of production: Artisan
    Lama production: Italy
    Blade: 12c26 stainless steel
    Blade treatment: -
    Handle: ram's horn
    Blade length: 110mm.
    Blade thickness: 3mm.
    Length closed: 145mm.
    Total length: 235mm.
    Thick when closed: -
    Balancing: -
    Weight: 80g.
    Closing: -
    Clip: -
    Sheath: -
    Packaging: rigid package with artisan production certificate signed by Antonio Deroma
    Note: -

    DR-PAT
    €307.38
    Out of stock
  39. Benchmade - Bugout 535-1901 - Natural Jade G10 - Axis Lock - Knife

    Intended use: Sports / EDC

    Type of production: Industrial
    Lama production: USA
    Blade: CPM-20CV 59 / 61HRC
    Blade treatment: Satin finish
    Handle: Natural Jade G10
    Blade length: 82mm.
    Blade thickness: 2.5mm.
    Length closed: 107mm.
    Total length: 189mm.
    Thick when closed: 10.8mm
    Weight: 60g.
    Closure: AxisLock
    Clip: stainless steel, removable and reversible, mini deep carry
    Packaging: Cardboard box with Benchmade logos
    Notes: New model included in the Benchmade catalog starting from 11/29/2019 which supports the previous versions of the Bugout model with CPM-S30V blade

    BM-531-1901
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  40. ExtremaRatio - BD4 R knife Satin - knife

    BD4 R SATIN is a new basic folder with the opening system High Speed Razor Opening System, its blade embodies the classic Italian style, elegant and functional.

    Intended use: Sports / Tactical

    Type of production: Industrial
    Lama production: Italy
    Blade: Stainless steel N690Co 58HRC
    Lama treatment: Satin
    Handle: Anticorodal
    Blade length: 122mm.
    Blade thickness: 3mm.
    Length closed: 150mm.
    Total length: 277mm.
    Thick when closed: 17mm.
    Balancing: -
    Weight: 130g.
    Closure: Liner Lock
    Clip: removable in stainless steel
    Sheath: -
    Packaging: cardboard box with Extrema Ratio logos
    Note: -

    ER-BD4R-BK
    €145.08
    Only -99 left
    Only -99 left
    Out of stock
  41. Zero Tolerance - ZT0223 - Tim Galyean - Military Flipper - knife

    Intended use: Tactical / Sports / Collection

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-20CV stainless steel
    Blade treatment: Black DLC
    Handle: Titanium Black DLC and G10
    Blade length: 89mm.
    Blade thickness: 4mm.
    Length closed: 128mm.
    Total length: 218mm.
    Thick when closed: 14mm
    Weight: 134g.
    Closure: Framelock
    Clip: Removable, reversible, in stainless steel
    Packaging: cardboard box with Zero Tolerance logos
    Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

    ZT0223
    €0.00
    Only -99 left
    Only -99 left
    Rating:
    93%
    4.7
    Out of stock
  42. Zero Tolerance - ZT0055BLK - Gus T. Cecchini - Black DLC - Limited Edition Sprint Run - knife

    Intended use: Sports / Collection

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-20CV stainless steel
    Blade treatment: Black DLC
    Handle: Black DLC Titanium
    Blade length: 95mm.
    Blade thickness: 4mm.
    Length closed: 127mm.
    Total length: 222mm.
    Thick when closed: 14mm
    Weight: 141g.
    Closure: Framelock
    Clip: Removable, reversible, in titanium
    Packaging: cardboard box with Zero Tolerance logos
    Notes: "Sprint Run" Limited Edition available while stocks last - Design by Gustavo T. Cecchini by GTC Knives - KVT opening on ball bearings - SLT Spring Loaded Tab opening system

    ZT0055BLK
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  43. Wander Tactical - Smilodon Iron Washed and Black Micarta - craft knife

    Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

    Use: Heavy Duty / Survival Tool

    Type of production: Artisan
    Lama production: Italy
    Blade: in steel D2 at 59 / 60HRC
    Blade Treatment: GunKote Ice Brush
    Handle: Micarta
    Blade length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 360mm.
    Balancing: set back
    Weight: 644g.
    Sheath: in Kydex, thermoformed
    Package: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-SM-B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  44. Wander Tactical - Raptor Raw Finish knife - OD green Paracord - craft knife

    Use: Neck Knife / Collection

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in D2 steel
    Blade treatment: Raw Finish
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Total length: 180mm.
    Balancing: set back
    Weight: 130g.
    Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

    WT-RA-BL
    €163.11
    Only -50 left
    Only -50 left
    Rating:
    87%
    4.4
    Out of stock
  45. Wander Tactical - Raptor Raw Finish knife - OD green Paracord - craft knife

    Use: Neck Knife / Collection

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in D2 steel
    Blade treatment: Raw Finish
    Handle: Paracord
    Blade length: 80mm.
    Blade thickness: 6.5mm.
    Total length: 180mm.
    Balancing: set back
    Weight: 130g.
    Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

    WT-RA-G
    €163.11
    Out of stock
  46. Maserin - Reactor knife - Brown G10 - Design by Nicolai Lilin - 681 / G10M - knife

    Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

    Intended use: sports collection

    Type of production: industrial
    Country of production: Italy
    Blade: in D2 steel
    Surface treatment: stonewashed
    Handle: titanium frame with G10 handle
    Blade length: 100mm.
    Blade thickness: 4mm.
    Closed length: 135mm.
    Total length: 243mm.
    Closed thickness: 14mm.
    Weight: 154g.
    Closure: Framelock with removable stainless steel leaf
    Clip: removable and reversible, in stainless steel
    Sheath: -
    Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

    MA-681/G10M
    €162.30
    Only 0 left
    Only 0 left
    Out of stock
  47. Maserin - Reactor knife - Green G10 - Design by Nicolai Lilin - 681 / G10V - knife

    Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

    Intended use: sports collection

    Type of production: industrial
    Country of production: Italy
    Blade: in D2 steel
    Surface treatment: stonewashed
    Handle: titanium frame with G10 handle
    Blade length: 100mm.
    Blade thickness: 4mm.
    Closed length: 135mm.
    Total length: 243mm.
    Closed thickness: 14mm.
    Weight: 154g.
    Closure: Framelock with removable stainless steel leaf
    Clip: removable and reversible, in stainless steel
    Sheath: -
    Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

    MA-681/G10V
    €162.30
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  48. Maserin - Reactor knife - Black G10 - Design by Nicolai Lilin - 681 / G10N - knife

    Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

    Intended use: sports collection

    Type of production: industrial
    Country of production: Italy
    Blade: in D2 steel
    Surface treatment: stonewashed
    Handle: titanium frame with G10 handle
    Blade length: 100mm.
    Blade thickness: 4mm.
    Closed length: 135mm.
    Total length: 243mm.
    Closed thickness: 14mm.
    Weight: 154g.
    Closure: Framelock with removable stainless steel leaf
    Clip: removable and reversible, in stainless steel
    Sheath: -
    Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

    MA-681/G10N
    €162.30
    Only 0 left
    Only 0 left
    Rating:
    87%
    4.4
    Out of stock
  49. Wander Tactical - Lynx - Raw Dual Tone & Micarta Desert - custom knife

    The Lynx is designed to satisfy all users in the 'scope of the Hunt, the Bushcraft and Survival. Thickness and dimensions have been studied to facilitate precision work and at the same time be reliable even for heavy work. Handy and compact, it is the perfect companion for the outdoors.

    Intended use: Utility / Collection

    Type of production: Custom
    Country of production: Italy
    Blade: D2 steel at 59 / 60HRC
    Blade treatment: GunKote Raw Dual Tone
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balancing: set back
    Weight: 318g.
    Sheath: leather, ambidextrous
    Packaging: no packaging - supplied with a certificate of originality and Wander Tactical guarantee
    Notes: Each knife is unique and handcrafted; there may be slight differences in finish, color and materials with the product shown in the photo.

    WT-LY-DTRMD
    €241.80
    Only -50 left
    Only -50 left
    Out of stock
  50. Wander Tactical - Godfather - Icebrush & Brown Wood - custom knife

    Type of production: Artisan
    Lama production: Italy
    Blade: in steel D2 at 59 / 60HRC
    Blade Treatment: Icebrush
    Handle: Micarta
    Blade length: 235mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: set back
    Weight: 768g.
    Sheath: Kydex, thermoformed, with Tek-Lok type connection
    Package: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-GF-ID
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  51. Rockstead - Chou HPC - Black Silk - neck knife

    With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.

    Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.

    Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
    Handle: interweaving in silk tied by hand
    Blade length: 45 mm.
    Blade thickness: 4 mm.
    Total length: 120 mm.
    Weight: 60 g.
    Sheath: neck, in Kydex
    Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.

    4069BLACK
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  52. Wander Tactical - Godfather knife - Dual Tone & Black Micarta - craft knife

    Type of production: Artisan
    Lama production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Dual Tone
    Handle: Micarta
    Blade length: 235mm.
    Blade thickness: 6.5mm.
    Total length: 400mm.
    Balancing: set back
    Weight: 768g.
    Sheath: in Kydex, thermoformed, with Tek-Lok type connection
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

    WT-GF-DT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  53. Wander Tactical - Hurricane Military Tool - GunKote Black & Micarta Black - custom knife

    Intended use: Tactical / Collection

    Type of production: Custom
    Production Lama: Italy
    Blade: full tang, D2 steel, cryogenic treatment, to 59 / 61HRC
    Blade treatment: GunKote
    Handle: Micarta
    Blade length: 110 mm.
    Blade thickness: 6.5mm.
    Overall length: 250 mm.
    Balance: on guard branch
    Weight: 345g.
    Sheath: Artisan, Kydex thermoformed with Tek-Lok attack
    Packaging: -
    Notes: being a prototype, the final product might be changed from that photographed

    WT-HUR-RCB
    €233.61
    Only -50 left
    Only -50 left
    Out of stock
  54. Wander Tactical - Lynx Knife - Ice Brush Tiger & Black Micarta - custom knife

    Type of production: Artisan
    Lama production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Ice Brush Tiger
    Handle: Micarta
    Blade length: 105mm.
    Blade thickness: 5mm.
    Total length: 235mm.
    Balancing: set back
    Weight: 264g.
    Sheath: in leather
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences
    Send feedback
    History
    Saved

    WT-LY-BF
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  55. Wander Tactical - Smilodon Row Finish - Brown Wood - custom knife

    Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

    Use: Heavy Duty / Survival Tool

    Type of production: handmade
    Production Country: Italy
    Blade: full tang in D2 steel, cryogenic treatment, to 59 / 61HRC
    Blade treatment: row finish
    Handle: Micarta
    Blade length: 180 mm.
    Blade thickness: 6 mm.
    Overall length: 340 mm.
    Balancing: slightly advanced than the guard branch
    Weight: 595 g.
    Sheath: Artisan, Kydex thermoformed, with Tek-Lok attack
    Packaging: -
    Notes: each knife is unique as it is handmade, there may therefore be slight differences compared with the photographed model, also with regard to shades of colors of blade and handle.

    124899
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  56. Wander Tactical - Hurricane Military Tool - Raw Finish and Green Micarta - custom knife

    Type of production: Artisan
    Lama production: Italy
    Blade: in D2 steel at 59 / 60HRC
    Blade treatment: Raw Finish
    Handle: Micarta
    Blade length: 110mm.
    Blade thickness: 6.5mm.
    Total length: 250mm.
    Balancing: set back
    Weight: 345g.
    Sheath: in Kydex, thermoformed, with Tek-Lok type connection
    Packaging: -
    Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.
    Send feedback
    History
    Saved
    Community

    12499
    €233.61
    Out of stock
  57. Freeman Outdoor Gear - Neck Knife 451 - Stonewashed - knife

    Use: Neck / Tactical / Utility

    Production Type: Semi-Handmade
    Production Country: USA
    Blade: stainless steel CPM-S35VN 59 / 60HRC
    Treatment Blade: Stonewashed
    Handle: -
    Blade length: 66mm.
    Blade thickness: 4.8mm.
    Overall length: 155mm.
    Weight: 95g.
    Sheath: Kydex with thickness of 1.5mm
    Packaging: Cardboard box with logos Freeman Outdoor
    Notes: -

    12367
    €147.54
    Only -50 left
    Only -50 left
    Out of stock
  58. Pohl Force - Hornet XL Survival knife - 2027 - Limited Edition - knife

    Intended use: Tactical / Sports

    Type of production: Industrial
    Lama production: Taiwan
    Blade: in D2 steel at 59HRC
    Blade treatment: black
    Handle: G10
    Blade length: 85mm.
    Blade thickness: 5.5mm.
    Length closed: -
    Total length: 185mm.
    Thick when closed: -
    Balancing: -
    Weight: 160g.
    Closing: -
    Clip: -
    Sheath: Kydex with H&S coupling
    Packaging: Cardboard box, zip carrying bag, warranty card
    Notes: each knife is numbered, limited edition of 999 pieces

    10578B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  59. Pohl Force - Hornet XL Outdoor knife - 2026 - Limited Edition - knife

    Intended use: Tactical / Sports

    Type of production: Industrial
    Lama production: Taiwan
    Blade: in D2 steel at 59HRC
    Blade treatment: satin finish
    Handle: G10
    Blade length: 85mm.
    Blade thickness: 5.5mm.
    Length closed: -
    Total length: 185mm.
    Thick when closed: -
    Balancing: -
    Weight: 160g.
    Closing: -
    Clip: -
    Sheath: Kydex with H&S coupling
    Packaging: Cardboard box, zip carrying bag, warranty card
    Notes: each knife is numbered, limited edition of 999 pieces
    Send feedback
    History
    Saved
    Community

     

    10578
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    97%
    4.9
    Out of stock
  60. ExtremaRatio - MF3T BC - Ingredior Tanto - knife

    Ingredior: "io entro".
    Lo specialista, la versione più spinta della serie MF, ha una punta studiata per ottenere la massima penetrazione mentre la doppia guardia aumenta la sicurezza nei colpi di punta.

    Destinazione d'uso: Tattico

    Tipo di produzione: Industriale
    Produzione Lama: Italia
    Lama: in acciaio inox N690Co
    Trattamento Lama: Testudo
    Manicatura: Anticorodal con frangivetro in acciaio inox e tagliacinture di sicurezza
    Lunghezza lama: 112mm.
    Spessore lama: 4mm.
    Lunghezza chiuso: 150mm.
    Lunghezza totale: 265mm.
    Spessore da chiuso: -
    Bilanciatura: -
    Peso: 200g.
    Chiusura: Liner Lock con sicura addizionale
    Clip: Acciaio inox
    Fodero: Nylon Nero, compatibile MOLLE, con chiusura in Velcro
    Confezione: Scatola di cartone con loghi Extrema Ratio
    Note:
    4358T
    €298.36
    Out of stock
Set Ascending Direction

60 Items





ecommerce sicuro