Coltelleria ed illuminazione

Intended Use: Mushroom Knife

Blade: Stainless steel 420
Handle material: Plastic
Blade length: 70mm.
Blade Thickness: 1.5mm.
Closed Length: 110mm.
Total length: 180mm.
Balance: -
Weight: 48g.
Closure: -
Clip: -
Sheath: -
Notes: Nylon brush

Also known as the ring of Barahir.

Originally it was given to Barahir by Finrod Felagund as a reward for saving his life in Dagor Bragollach. From generation to generation came into the hands of the line of Isildur, and then Aragorn.

The ring, depicting two snakes, is produced in metal covered with a hypoallergenic silver swarovski emerald green stone set in the middle.

Inner diameter of 19 mm.

Is accompanied by a package composed of a treasure chest hardcover depicting the image of "Middle Earth", a velvet bag with the company logo, "The Lord of The Rings" and a certificate that guarantees its authenticity.

It 'an officially licensed product accompanied by New Line Cinema.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Early 2000s knife, previously purchased.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in Kydex sheath.
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: MidTech
Country of Production: USA
Blade: full tang stainless steel CPM-S30V
Finish: Tiger Stripe
Handle: Paracord
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 195mm.
Weight: 125g.
Sheath: thermoformed kydex, with Tek-Lok multi-position attachment
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Yes, but only in stonewashed "Thunderstorm" finish.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel 154CM
Blade finish: dual tone (satin and stone washed)
Country of manufacture: USA
Handle: G10 and titanium liners
Blade length: 76mm.
Blade thickness: 3.2mm.
Length closed: 104mm.
Total length: 183mm.
Weight: 114g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: Collected specimen from private collection, absolutely like new

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory



Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good condition

Intended use: Mushroom knife

Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo Gobbato

Knife withdrawn from private collection - Overall in very good condition, however, the previous owner removed the clip from the knife, a clip no longer present inside the package and therefore not provided - The knife still has the factory sharpening which should be slightly brightened, however - Supplied with original Spyderco cardboard box - Checked and certified by our in-house laboratory.

Intended Use: Sporting

Type of manufacture: industrial
Blade: stainless steel VG-10
Blade finish: satin
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 94g.
Locking system: Back Lock
Clip: -
Notes: knife withdrawn from private collection, clipless, overall in very good condition

Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory

Intended use: Sports

Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpening

Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

Intended Use: Tactical

Manufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium 
Package: Nylon pouch with zipper 
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.

Destination: French regional collector's knife

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: Absent

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Japan
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade finish: Satin finish
Handle: FRN
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports

Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: M390 stainless steel
Blade treatment: Blackwash
Handle: Carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 84g.
Closing: Sub FrameLock
Clip: Removable and multi-position, in Teflon coated stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Sprint Run Edition - Carson Flipper type opening system on KVT ball bearings

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Teflon coating
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Weight: 105g.
Closure: Liner Lock
Clip: Removable, multi-position, Teflon coated stainless steel
Packaging: cardboard box with Spyderco logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black TiNi
Handle: aeronautical aluminum 6061-T6 Black TiNi
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 96.4g.
Closing: Sub FrameLock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Sprint Run Edition - Carson Flipper type opening system on KVT ball bearings

Intended use: Sports

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closing: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Note: -

Intended use: sub / immersion / sports

Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosion

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: Sandvik 14C28N stainless steel
Blade treatment: Stonewashed
Handle: 6061-T6 anodised aeronautical aluminum
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 96.4g.
Closure: Sub FrameLock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Carson Flipper opening system

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Gray
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Green
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

Purpose: Sportsman / Collectibles

Type of production: industrial
Blade: Clad - Centrally-laminated steel in Aogami SuperBlue Steel at 65 / 66HRC and outer cheeks in stainless steel 420J1
Blade treatment: satin finish
Country of production: Japan
Handle: Gray FRN with drowned stainless steel liners
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Closed thickness: 15.5mm.
Weight: 94g.
Closing: Back Lock
Clip: removable, multiposition, stainless steel
Packing: Cardboard box with Spyderco logos
Notes: Sprint Run Limited Edition, made in only 1200 specimens featuring a carbon steel centered steel core and stainless steel cheeks

Intended use: Tactical / Military

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel S35VN
Blade treatment: DLC Coating
Handle: G10 Orange and Titanium DLC Coating
Blade length: 91mm.
Blade thickness: 3.6mm.
Closed Length: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Weight: 178g.
Lock: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - in collaboration with Emerson Knives - patented opening system Wave

Intended use: Tactical / CQC

Type of production: Industrial
Blade: stainless steel 440C
Blade treatment: Black
Handle: -
Blade length: 60mm.
Blade thickness: 2 mm.
Overall length: 155mm.
Balancing: -
Weight: 52g.
Sheath: Kydex Black Click-Lok
Packaging: cardboard box with Hoffner logos

Lightweight, Ultra Flat, so easy to conceal, but sharp, strong, and ready for a fast deployment. The Hoffner Bodyguard Neck Knife can be used with the RGH (Rear Grip Hold) Hoffner System or with traditional grips. The hole Provides secure and balanced grip transitions as well as grip security.

Intended use: Tactical / CQC

Type of production: Industrial
Blade: stainless steel 440C
Blade treatment: -
Handle: G-10 black chiseled
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 148g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with Hoffner logos

Intended use: Tactical / CQC

Type of production: Industrial
production Blade: Taiwan
Blade: D2 steel Flipper opening system
Blade treatment: satin
Handle: Black G10
Blade length: 86mm.
Blade thickness: 5mm.
Closed Length: 125mm.
Overall length: 215mm.
Thick when closed: 16mm
Balancing: -
Weight: 216g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Notes: opening on ball bearings
Packaging: cardboard box with Hoffner logos

Intended use: Tactical / CQC

Type of production: Industrial
production Blade: Taiwan
Blade: D2 steel Flipper opening system
Blade treatment: satin
Handle: carbon fiber
Blade length: 86mm.
Blade thickness: 5mm.
Closed Length: 125mm.
Overall length: 215mm.
Thick when closed: 16mm
Balancing: -
Weight: 212g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Notes: opening on ball bearings
Packaging: cardboard box with Hoffner logos

Intended use: Tactical / CQC

Type of production: Industrial
production Blade: Taiwan
Blade: D2 steel Flipper opening system
Blade treatment: satin
Handle: G-10 chiseled
Blade length: 86mm.
Blade thickness: 5mm.
Closed Length: 125mm.
Overall length: 215mm.
Thick when closed: 16mm
Balancing: -
Weight: 218g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Notes: opening on ball bearings
Packaging: cardboard box with Hoffner logos

Intended Use: Tactical / CQC

Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 100mm.
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner 

Intended Use: Tactical / CQC

Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 132g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel S35VN
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel CTS204P
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel Elmax
Treatment Lama: Black DLC Coating
Handle: G-10 and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 182g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Carbon Fibre with folders in stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Lama: In steel CPM-S30V
Blade treatment: Coating Blackwash
Handle: G-10 folder with stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Intended Use: Collection

Type of production: industrial
Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
Country of manufacture: Japan
Handle: brushed titanium
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 222mm.
Weight: 119g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: leatherette zippered pouch with Spyderco logos
Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.

Intended Use: Collection

Type of production: Industrial
Blade: Damascus steel laminate DPS15 with sharp VG-10 58HRC
Treatment Lama: -
Production Lama: Japan
Handle: Titanium brushed
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Balancing: -
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Note: the blade is made in a special steel with 31 layers produced by Takefu Special Steel Company Ltd.

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 440
Produzione Lama Italy
Manicatura: in legno di palissandro
Lunghezza lama: 180mm.
Spessore della lama: 5mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in cuoio con attacchi molle
Confezione: scatola di cartone 
Note: Incisione sulla lama "2° REGIMENT ETRANGER PARACHUTISTES". Incisione sul pomello dell'impugnatura: "Logo Para' Commando"