Coltelleria ed illuminazione

Intended Use: Mushroom Knife

Blade: Stainless steel 420
Handle material: Plastic
Blade length: 70mm.
Blade Thickness: 1.5mm.
Closed Length: 110mm.
Total length: 180mm.
Balance: -
Weight: 48g.
Closure: -
Clip: -
Sheath: -
Notes: Nylon brush

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Early 2000s knife, previously purchased.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in Kydex sheath.
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: MidTech
Country of Production: USA
Blade: full tang stainless steel CPM-S30V
Finish: Tiger Stripe
Handle: Paracord
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 195mm.
Weight: 125g.
Sheath: thermoformed kydex, with Tek-Lok multi-position attachment
Notes: previously purchased knife, from private collection

A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.

Destination: French regional collector's knife

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: Absent

Laguiole En Aubrac - Horn of Buffalo - knife collection

Destination : Knife regional French collector

Blade: 12C27 Swedish stainless steel in 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm .
Overall length : 220 mm .
Weight: 68 g .
Folders : Stainless steel brushed
Heads : Absent
Closure : Spring retention in satin stainless steel
Clip: None
Sheath: None

Laguiole En Aubrac - Horn Classic 11 cm - Knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 105mm.
Blade Thickness: 3mm.
Closed Length: 130mm.
Total length: 240mm.
Balance: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Horn Classic - knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 90mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Total length: 200mm.
Balance: -
Weight: 72g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Lily inlaid - ebony - knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Thickness of handle: 33mm.
Length closed: 118mm.
Total length: 217mm.
Balance: -
Weight: 98g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Myctic Horn Blonde - knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 118mm.
Total length: 217mm.
Balance: -
Weight: 64g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Buffalo Brut de forge and knife - knife

Destination: Knife regional French collector

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless steel satin
Heads: Absent
Closure: Spring retention in satin stainless steel
Clip: None
Sheath: None

Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachment