Coltelleria ed illuminazione

Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.

Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -

Laguiole En Aubrac - Horn blond with sanmai Japanese blade - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: damascus steel and laminated VG10 Japanese
Production Lama: France
Handle: Horn blond
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 91g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Maxpedition - Janus Black - 8001B - Extention Pocket

materials:
- Lightweight fabric with ballistic 1000 denier nylon water-resistant and abrasion
- Teflon fabric protector for dirt resistance and easy maintenance
- High strength YKK Zippers
- UTX-Duraflex nylon buckles for a reduction of noise
- Triple polyurethane coating for waterproofness
- High-strength nylon fabric
- Wire nylon composite high tensile strength (stronger than the normal standard nylon thread)
- Foam padding with closed cell high quality AS-100 for shock protection
- Internal seams taped and finished
- Pullers in paracord
- Stress points double stitched, reinforced thanks to the "Bartacked" or "Box-and-X" for added strength

Intended Use: Sport / Tactical

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Blade: Teflon
Production Lama: China
Handle: G10
Blade length: 76mm.
Blade Thickness: 3mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 107g.
Lock: Liner Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie Emerson

Intended use: EDC / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: Teflon
Handle: Stainless steel and FRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed Length: 101mm.
Overall length: 176mm.
Thick when closed: 8mm.
Balancing: -
Weight: 86g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin

Intended use: EDC / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: -
Handle: Stainless steel and FRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed Length: 101mm.
Overall length: 176mm.
Thick when closed: 8mm.
Balancing: -
Weight: 86g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin

Intended use: Tactical / Outdoor


Type of production: Industrial
Production Lama: China
Blade: Stainless Steel 440
Treatment Blade: Black Idroglider
Handle: Tan G10
Blade length: 125mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 245mm.
Thick when closed: -
Balancing: -
Weight: 275g.
Closing: -
Clip: -
Sheath: Cordura, with MOLLE attacks
Packaging: cardboard box with logos BlackFox
Notes: Design by Antonio di Gennaro

Intended Use: Sport / Tactician

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Satin
Handle: Green Paracord
Blade length: 95mm.
Blade thickness: 6.8mm.
Length closed: -
Overall length: 196mm.
Thick when closed: -
Balancing: -
Weight: 246g.
Closing: -
Clip: -
Sheath: Kydex with built-in sharpener, diamond and attacks Tek-Lok
Packaging: Cardboard box with logos Boker Magnum
Notes: design by Thomas Krug

ATTENTION: as this is a handmade product, the external appearance (colors, finishes, etc.) differs from the photographed piece.

Intended use: Regional / Collection

Type of production: artisanal
Blade: 12C27 stainless steel
Lama production: France
Handle: Cattle Horn
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 220mm.
Balancing: -
Weight: 92g.
Closure: rear retention springk
Clip: -
Sheath: -
Notes: rear corkscrew

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

Knife withdrawn from a private collection - Rare and numbered model produced by the Quartemaster Knives in 2013 - Like new condition. Never re-sharpened - With original box - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical

Type of production: Industrial
Blade production: 100% USA
Blade: in sintered stainless steel CTS-BD4P
Lama treatment: Texas Tea
Handle: G-10 and stainless steel
Blade length: 76mm.
Blade thickness: 5mm.
Total length: 19.6mm.
Thick when closed: 13mm.
Balancing: -
Weight: 181g.
Closure: Frame Lock
Clip: Removable and reversible, in stainless steel
Sheath: -
Packaging: Cardboard box with Quartermaster logos
Notes: Opening system on ball bearings ORB Pivot System - Single limited edition copy numbered on blade and box N.97

Intended use: Hunting

Type of production: Industrial
Lama production: Germany
Blade: 440C 58HRC steel
Blade treatment: -
Handle: Deer
Blade length: 150mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 260mm.
Thickness when closed: -
Balancing: set back, at 2cm.
Weight: 216g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box
Note: -

Intended use: Tactical

Type of production: Industrial
Production Lama: China
Blade: 440A
Treatment Blade: Dark Stone Washed
Handle: G10 Desert
Blade length: 89mm.
Blade thickness: 2.6mm.
Length closed: -
Overall length: 200mm.
Thick when closed: -
Weight: 127g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: aluminum box with logos Boker Magnum
Notes: -

Intended use: Tactical / Outdoor


Type of production: Industrial
Production Lama: China
Blade: Stainless Steel 440
Treatment Blade: Black Idroglider
Handle: Black G10
Blade length: 125mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 245mm.
Thick when closed: -
Balancing: -
Weight: 275g.
Closing: -
Clip: -
Sheath: Cordura, with MOLLE attacks
Packaging: cardboard box with logos BlackFox
Notes: Design by Antonio di Gennaro

Takefu Knives Village è un marchio nato nel 1991 a Echizen Fukui, città del Giappone famosa dal 1400 per la produzione di coltelli.

Il brand Takefu knives si fonda sull'unione di 10 artigiani locali che realizzano a mano ogni coltello

L'acciaio delle lame, prodotto dalla Takefu Steel, viene lavorato con la tecnica del "clad steel" tagliente in VG10 a 61HRC e placche laterali in damasco laminato.

Caratteristiche del coltello:

Impiego: carne/pesce

Lama: in acciaio CladSteel con tagliente in inox VG-10 a 60/62HRC
Provenienza Lama: Giappone 
Impugnatura: SandalWood, legno molto duro e resistente all'acqua
Confezione: in cartone con scritte giapponesi
Lunghezza Lama: 224mm 
Lunghezza Totale: 380mm 
Spessore Lama: 4,5mm 
Lunghezza Impugnatura: 134mm 
Peso: 166g

* Non ogni coltello viene firmato sulla lama dall'artigiano che l'ha realizzato

With the Quebec One, Pohl Force has implemented a classic use knife that
has been high on the wish list of company founder Dietmar Pohl for more than 20 years. Finally Pohl Force has received exclusive permission of the original manufacturer to be able to use the basic design for its own interpretation. As a “Ground Forces Combat & General Purpose Weapon“ the knife was developed in the early ‚50’s for the U.S. Marine Corps.
Although never officially introduced, it was used in Vietnam -mainly in the hands of Special Forces units where it clearly demonstrated its capabilities. Pohl Force has now recreated 60 years later a modern interpretation of this classic knife which displays the optimal fusion of a classic old school design, with modern high- tech manufacturing.

Overall length: 315 mm / 12.40 inches
Blade length : 193 mm / 7.59 inches
Blade thickness: 5.9 mm / 0.235 inch
Weight: 404 g
Blade steel: Sleipner
Blade finish: MilSpec coating
Handle material: G-10
Handle thickness: 24 mm / 0.94 inch
Sheath: Kydex® plus Adapter
Included accessories: Lanyard

Intended Use: Regional / Collection

Type of production: craft
Blade: Black Damascus Handforged
Production Lama: France
Handle material: cow horn tip with central inserts in Black Damascus, double liners in steel and 24k gold.
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 116g.
Closure: rear spring retention
Clip: -
Sheath: -
Note: gift box in leather with logos Laguile en Aubrac - Specimen in limited and numbered edition, serial number # 01

Penna tattica e da difesa interamente realizzata in alluminio con puntale intercambiabile in nylon o in acciaio inox.

Un'estremità della penna è infatti acuminata e ricorda nelle forme un kubotan, in modo da poter essere efficacemente utilizzata per scopi difensivi come strumento di pressione su punti sensibili.

L'alluminio aeronautico impiegato per realizzare la penna, con anodizzazione type 3, la rende leggera ma molto robusta ed estremamente resistente agli agenti esterni.

Non è solo uno strumento difensivo o una ricercata penna, può anche sostituire il pennino del proprio PDA o Blackberry ed è altresì un oggetto affascinante oltre che un'ottima idea regalo.

Corpo Penna: alluminio aeronautico 6061 T-6
Trattamento: anodizzazione Type 3
Clip: acciaio inox brunito
Tappo: a vite, in alluminio aeronautico 6061 T-6
Lunghezza: 150mm.
Diametro: 13mm.
Peso: 40g
Inchiostro: Colore nero, Schmidt, pressurizzato
Note: puntale amovibile in acciaio inox o in nylon

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 16.5mm.
Balancing: -
Weight: 284g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box