corkscrew

The corkscrew Moretto an indispensable partner of the tradition of good wine. Every moment of conviviality that expression emotional stresses that a meeting point for culture, beauty, functionality and design.
Moretto consists of 3 parts assembled entirely made of a special resin. The operation of screwing and unscrewing facilitated by the bearing of balls placed inside the corkscrew.

The corkscrew Moretto an indispensable partner of the tradition of good wine. Every moment of conviviality that expression emotional stresses that a meeting point for culture, beauty, functionality and design. Moretto consists of 3 parts assembled entirely made of a special resin. The operation of screwing and unscrewing facilitated by the bearing of balls placed inside the corkscrew. Moretto - Corkscrew made in Italy - Metal Colors The Moretto plastic corkscrew is a cheaper version than the aluminum one, it differs from the previous one only for the motor part that is actually made of plastic rather than aluminum. The numbers: The dimensions are the same as the aluminum corkscrew. Total height, with cap inserted: cm 15.2, diameter: cm 5.3. Perforating drill: ∅ cm 1.2 with a perforating capacity of 6.5 cm. The Moretto corkscrew is available in 5 new colors: carbon, silver gray, lead, manganese and walnut.

The corkscrew Moretto an indispensable partner of the tradition of good wine. Every moment of conviviality that expression emotional stresses that a meeting point for culture, beauty, functionality and design.
Moretto consists of 3 parts assembled entirely made of a special resin. The operation of screwing and unscrewing facilitated by the bearing of balls placed inside the corkscrew.

Monopol - Bottle opener and corker AH-SO MONOPOL Two-Prong Cork Puller AH-SO, chrome-plated MONOPOL Two-Prong Cork Puller AH-SO, chrome-platedWaiter's friend, super fine polished, satin-finished, two hardened steel prongs embrace the cork, without damaging it, thus ideal also for brittle corks. MONOPOL offers a specially sharpened cutting thread. The cutting thread “cuts” its way softly through the cork and does not press it apart. A breakage of the cork when pulling it out is almost impossible because of the wide, flat pulling surface of the thread. Two hardened steel prongs embrace the cork Thus ideal also for brittle corks With decorative casing With cap opener Dimensions: 4.33 inches x 2.55 inches x 0.39 inches Weight: 70 g Material: handle zinc-die casting, chrome-plated Casing steel chrome-plated Steel-prongs Manufacturer Art.-No.: 6285556C How to use and to care: First enter the longer prong between cork and bottle neck. Then apply twisting downwards movement until the handle touches the top of the bottle. By simultaneous turning and pulling the cork can easily be removed from the bottle. It is also possible to re-cork the bottle using the Ah-So following the steps in the opposite way round. The steel prongs are factory-wise treated with a foodfriendly grease and should be lubricated again from time to time with a drop of cooking oil. Please wipe Ah-So dry after every use.

Moretto - Corkscrew made in Italy The corkscrew Moretto is an indispensable companion of good tradizionedel drink typically italiana.Ogni moment of conviviality and festasottolinea emotional expression which is a meeting point between culture, beauty, features and design. Moretto is composed of three parts assembled to form the central part and the driving part, entirely in aluminum. The piercing tip is steel coated with a chromium plating treatment suitable tothe foods. The numbers: Total height, inserted in cap: 15.2 cm. Drill bit tip: 1,2 cm with drilling capacity to 6.5 cm. operation Remove the lower ring whose function is to protect the "worm". Gently place your hand on the corkscrew bottle cork trying to position the worm at the center. Make a little 'pressione.Successivamente turn the upper ring nut clockwise to successfully extract the cork from the bottle. To remove the cork from the corkscrew now turn the nut counterclockwise An important feature of Moretto is that the screwing and unscrewing for the extraction of the cap is facilitated by the ball bearing placed inside the body, in the higher. Available in silver and black.