Cutlery and lighting

Intended use: Light Utility / Hunting

Type of production: Industrial
Lama production: Italy
Blade: Full Tang in N690Co stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 115mm.
Blade thickness: 5mm.
Length closed: -
Total length: 250mm.
Thickness when closed: -
Balancing: 3cm back
Weight: 245g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Blade: AISI 1060 high-carbon steel
Blade length (including habaki): 23,50cm.
Motohaba: 2.65cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 4,5cm.
Tsukamaki length: 13.5cm.
Total Length: 37.8cm.
Weight: 346g. (without sheath) - 434g. (including sheath)
Balance: advanced, at 1cm
Saya: black varnished wood
Handle: same white with tsukagawa in black cotton
Sageo: black cotton
Fuchi and Kashira: in brass
Habaki and Menuki: in brass
Seppa: Brass
Notes: -

Small technical glossary: ​​Hamon: blade hardening line * Hi: deep groove in the blade, also called colander * Saya: sword sheath * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather that wraps the handle * Tsuba: guard * Fucks: ornaments between guard and manicure * Kashira: ornament at the end of the mitt * Menuki: medallions placed under the jumper of the mitt * Habaki: collar banding the beginning of blade * Seppa: guard gaskets * Shitodome: gaskets to which the Sageo is attached * Motohaba: foam height to the foam * Sakihaba: knife height to the kissaki.

United Cutlery UC1424 LOTR™ Museum Collection Sting™ in edizione numerata a tiratura limitata

Questa replica finemente dettagliata è la versione "Museum Collection" di United che si differenzia per l'aspetto "vissuto" di lama, guardia e pomolo; per i materiali utilizzati di altissimo livello e per la lama realizzata in acciaio al carbonio, come una vera spada da utilizzo concreto. La spada ha pesi e bilanciature ottimali per essere brandita.

Benché per gli standard di uomini ed elfi sia da considerarsi una sorta di daga, per un Hobbit si può considerare una spada a tutti gli effetti. Bilbo diede Pungolo a Frodo, poco prima della partenza della Compagnia dell'Anello da Gran Burrone. Dopo la sconfitta di Sauron alla fine della Terza Era, Frodo la donò a Samvise Gamgee.

Il nome "Pungolo" venne dato alla spada da Bilbo dopo il suo combattimento coi Ragni Giganti di Bosco Atro, nelle prime versioni però il nome dato alla spada è "pungiglione".

Come tutte le antiche lame elfiche, Pungolo risplende magicamente di una luce azzurrina in caso di presenza di Orchi nelle vicinanze; Gollum, che detesta tutto ciò che è stato fatto dagli Elfi (a causa dell'intrinseca carica di purezza che gli oggetti elfici assorbono dai loro creatori), ha paura di Pungolo. Questo ha aiutato Bilbo nel suo confronto con Gollum sotto la montagna ne Lo Hobbit e, successivamente, anche Frodo grazie al terrore che la lama ispirava a Gollum, è riuscito a domarlo (temporaneamente) ne Il Signore degli Anelli. Pungolo ha la capacità di tagliare facilmente le tele di ragno visto che con ogni probabilità era stato creato proprio per questa necessità da suoi creatori di Gondolin, a quel tempo infatti vi erano numerosi ragni per i boschi lì attorno e risultava quindi più comodo avere uno spadino o pugnale da usare piuttosto che una grande spada. Questa lama è di assoluto terrore per Shelob e tutti i ragni in generale cresciuti nell'oscurità.

Lama: acciaio al carbonio, con numero di serie inciso sulla lama
Impugnatura: in legno massiccio con dettagli in foglia d'argento
Pomolo: metallo anticato placcato in argento 
Guardia: metallo anticato placcato in argento
Lunghezza lama: 37cm.
Lunghezza totale: 50cm.
Supporto: vetrina da parete o da appoggio realizzata in legno massiccio con numero di serie ed angoli in ottone placcato, spesso vetro smussato, serratura con chiave rimovibile e grafica stampata a colori nella parte inferiore del display.
Confezione: scatola di cartone con loghi "The Lord of The Rings" e certificato di autenticità con licenze cinematografiche
Note: Edizione a tiratura limitata e numerata, sia su lama che su espositore, realizzata in soli 3000 esemplari

Like all the ancient elven blades, Sting magically shines with a blue light in the presence of Orcs nearby; Gollum, who hates everything that has been done by the Elves (because of the intrinsic charge of purity that Elven objects absorb from their creators), is afraid of Sting.

This has helped Bilbo in his confrontation with Gollum under the mountain in The Hobbit and, later, also Frodo thanks to the terror that the blade inspired to Gollum, has managed to tame it (temporarily) in The Lord of the Rings.

Sting has the ability to easily cut spider webs since it was probably created for this need by its creators of Gondolin, at that time there were in fact numerous spiders for the woods around it and it was therefore more convenient to have a sword or dagger to use rather than a big sword. This blade is of absolute terror for Shelob and all spiders in general grown in the darkness.

This finely detailed replica is a 1: 1 scale reproduction of the sword used for filming the "Lord of the Rings" trilogy.

Blade: 420J2 stainless steel, engraved
Handle: painted wood
Knob: antique metal
Guard: engraved antique metal 
Blade length: 39cm.
Total length: 57cm.
Support: wooden wall display; hooks and screws for mounting included
Packaging: cardboard box with "The Lord of The Rings" logos and certificate of authenticity with movie licenses

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: micarta
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: -
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 168g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Takeshi Saji - Miyabi Shikarigata knife - Knife custom

Intended Use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Hand Forged, damask laminated with sharp Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Sakura (cherry wood)
Blade length: 115mm.
Blade thickness: 4mm.
Closed Length: -
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 160g.
Closed: -
Clip: -
Sheath: Leather and Sakura (cherry wood)
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: black rattan
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 146g.
Closing: -
Clip: -
Sheath: wood covered with rattan
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

La spada di Boromir tratta dal film “Il Signore degli Anelli”
- Lama in acciaio inox 420 non affilata di cm 76 
- Lunghezza totale cm 105 
- Impugnatura in metallo solido con finitura in pregiato cuoio.

- Certificato di autenticità presente nella confezione
- Supporto in legno

The blade's flattened diamond shape and equally wide fuller reduced weight, yet retained strength in the end of the blade by stopping just short of the tip. It was equally effective for slashing against lightly armored opponents and for thrusting into more heavily protected enemies. The guard, similar to that of his father's sword, showed a warrior's flourish in that it was formed from a square-edged piece of steel that had been twisted before being curved into a crescent. The handgrip was wide like the blade, and the pommel was an elegant and simple piece of steel that added weight to balance the blade.

UC-1400 Sword of Boromir™
Includes a parchment certificate of authenticity.
Overall Length: 39"
Blade Length: 30-3/16"
Blade Thickness: 1/4"
Blade Material: Tempered, 420 J2 stainless steel with a fuller grind, false-edged.
Handle Material: Solid metal guard and pommel, antique metal finish, genuine leatherwrapped grip, tapered tang construction.
Plaque: 12-1/8" x 13-3/8" x 3/4" wood, silkscreened design. Hardware, instructions included.

The blade is cast of forged tool steel and features brass engraved decoration sand a weathered steel finish giving it a battle-worn appearence. Close attention to quality is a priority in every hand-selected piece. Each replica is marked with the appropriate copyrights to ensure authenticity. Includes display plaque and certificate of authenticity.

UC-2628 The Bearded Axe of Gimli™
Includes a parchment certificate of authenticity.
Overall Length: 87
Axe Head Length: 20
Axe Head Material: Forged tool steel, weathered and distressed finish, false-edged.
Plaque: Hardwood plaque. Hardware, instructions included.

Neca - Clash of the Titans Perseus Sword - Prop Replica

Official sword from the movie Clash of the Titans produced by Neca.

The film, released in the United States April 2, 2010 and in Italy from April 16, is the remake of Clash of the Titans in 1981, inspired by the greek myth hero Perseus. A little 'far from reality mythological, for purposes of the story (as it did for Troy whose director publicly stated only be "loosely based" ancient texts), some events are changed and included characters that have little to do with the film original

Blade: Steel
Handle: Metal
Blade length: 49cm.
Total length: 69cm.
Blade thickness: 7mm.
Balancing: Advanced
Weight: 1540g.
sheath:
Notes: Manufactured under license film

Official sword from the movie Clash of the Titans produced by Neca.

The film, released in the United States April 2, 2010 and in Italy from April 16, is the remake of Clash of the Titans in 1981, inspired by the greek myth hero Perseus. A little 'far from reality mythological, for purposes of the story (as it did for Troy whose director publicly stated only be "loosely based" ancient texts), some events are changed and included characters that have little to do with the film original

Blade: Steel
Handle: Metal
Blade length: 60cm.
Total length: 89cm.
Blade thickness: 7mm.
Balancing: Advanced
Weight: 2020g.
sheath:
Notes: Manufactured under license film

YariNoHanzo - Tanto Folded - YN210

Blade: AISI 1060 HCS folded (damask) high carbon content
Hamon: Style note
Hi: -
Blade length (without habaki): 23,50cm.
Motohaba: 2.5cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 5mm.
Kissaki: 4,5cm.
Tsukamaki Length: 11.5cm.
Total length: 40cm.
Weight: 340g.
Balance: advanced, to 1cm
Saya: black painted wood
Handle: same Tsukagawa white with black cotton
Sageo: black cotton
Fuchi and Kashira: Brass
Habaki and Menuki: Brass
Seppa: Brass
Notes: -

United - Mace of the Defiler Azog UC3015 - The Hobbit - sword fantasy

Official product, produced by United Cutlery, the Mazza Azog view of the film trilogy The Hobbit

This is based on the official replica prop used for the film. The product is made of reinforced polyresin and is sold with a stand with a graphic pattern that reproduces the scars and tattoo Azog. The package includes a certificate of authenticity.

- UC3015 Azog Mace of the Defiler

- Overall length: 101 cm
- Mace Head: 33 cm

Intended Use: Sport / Tactician

Type of production: Industrial
Production Lama: China
Blade: 440A stainless steel
Treatment Blade: Black Stone Washed
Handle: G10
Blade length: 131mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 250mm.
Thick when closed: -
Balancing: -
Weight: 198g.
Closing: -
Clip: -
Sheath: Kydex, free from damage belt
Packaging: Cardboard box with logos Boker Magnum
Notes: -

Blade: 8Cr13MoV stainless steel - Teflon 57/58HRC
Handle material: stainless steel 2CR13
Blade length: 7.5 mm.
Blade Thickness: 2.5 mm.
Total length: 180 mm.
Weight: 78 g.
Closure: Frame Lock
Clip: Stainless Steel
Notes: -

United - Morgul Blade, The Blade Of The UC2990 Nazgul - The Hobbit - fantasy sword

The Nazgûl, the Ringwraiths (in English Ring-Wraiths), also known as the Knights Blacks or Wing Riders, are the characters of Arda, the fictional universe created by JRR Tolkien: it is nine evil specters subject to Sauron.

- Blade Length: 455 mm
- Total length: 620 mm
- Blade Thickness: 5 mm
- Handle: Solid metal covered with fine leather.
- Blade guard and pommel antique
- Weight: 800g

Wooden support
Official product of New Line Cinema with certificate of authenticity

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 440A stainless steel
Treatment Lama: Browning
Handle material: Micarta
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 395g.
Closing: -
Clip: -
Sheath: Cordura
Packaging: Cardboard box with logos Boker Magnum
Notes: -

Fodero in Vinile di colore nero con profili grigi per multiuso Victorinox e coltelli chiudibili di medio/grandi dimensioni.
Particolarmente adatto a multiuso oltre i 6 strati o ai modelli Victorinox "Handyman" e "SwissChamp".

Dimensioni massime del coltello inseribile: 9 x 4 x 2.5 cm.
Chiusura: Velcro
Fissaggio: Verticale
Note: Asola interna per trasportare una torcia "Maglite Solitaire"

Victorinox - Nylon Sheath 4.0547.3 - Large 111mm Series - utility knife

Cordura belt sheath with black color, with pocket torch, for multi-purpose 111 mm 2/3 layers with Federal Cross and shield.

Maximum size of knife inserted: 12 x 4 x 2 cm.
Closure: Velcro
Mounting: Vertical
Note: Slot internal to carry a torch "Maglite Solitaire"

Victorinox - leather sheath 4.0523.3 - Large 111mm Series - utility knife

Holster belt in black leather, for multi-purpose 111 mm 2/3 layers with Federal Cross and shield.

Maximum size of knife inserted: 12 x 4 x 2 cm.
Closure: Velcro
Mounting: Vertical

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPM-S30V by Bos
Treatment Blade: Stonewashed
Handle material: titanium
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Thick when closed: 10mm.
Balance: -
Weight: 76g.
Closure: Frame Lock
Clip: Reversible and removable titanium
Sheath: -
Packaging: cardboard box with logos Buck
Notes: Hardened by Paul Bos - wooden box

Blade: N690Co Stainless Steel

Handle: Ziricote Wood

Blade Lenght: 105mm.

Blade Thickness: 5mm.

Overall Lenght: 237mm.

Weight: 246g.

Sheath: Brown Leather

Notes: Made in Italy - Design by Fabrizio "Sylvester" Silvestrelli

Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli

What makes a good logo knife? It should be affordable, and it should have some large flat areas on the blade or frame suitable for logo imprinting. So we are very happy to present the Drifter series. They're high-quality knives that are priced low enough to purchase in quantity, and all have flat areas that are perfect for our "Company Billboard" imprinting by laser or silk screen. Or you can take any one to your local trophy house for personalized engraving. 

The Drifter Stainless is a stainless steel frame-lock folder with a Razor-Sharp edge. The flat titanium nitride-coated frames are ideally suited for imprinting. It also features a 2.875" 8Cr14MoV stainless steel blade with a Razor-Sharp edge and a brushed finish. A stainless steel clip is included.

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Handle material: G10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 93mm.
Total length: 163mm.
Thick when closed: 14mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Intended Use: Sport / Tactical

Type of production: Semi-Industrial
Production Blade: Italy
Blade: Stainless Sleipner 60/61HRC
Treatment Blade: Black
Handle: 7075 piece
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 140g.
Closure: Frame Lock with security system Rotoblock
Clip: removable and reversible, stainless steel
Sheath: -
Packaging: cardboard box with logos Lion Steel
Notes: Design by Peg

Purpose : Sport / Tactical

Type of production : Semi-Industrial Production Lama
:
Italy Lama : Stainless Sleipner 60/61HRC
Privacy Lama : - Handle
: Titanium 6Al4V block
blade length : 75mm.
blade thickness : 4mm.
total length : 180mm.
thickness when closed : 9mm.
Balancing : -
Weight : 140g.
closing : Frame Lock with security system Rotoblock
Clip : removable and reversible, stainless steel sheath
: -
Pack : wooden box with logos Lion Steel
Notes : Design by Peg