Cutlery and lighting
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
Opinel - N ° 08 Oak Champignon with Sheath and Wooden Box - 001327 - Mushroom Knife
Intended use: Mushroom knife
Blade: Sandvik 12C27 stainless steel
Handle: oak wood
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 125mm.
Total length: 200mm.
Balancing: -
Weight: 95g.
Closure: viroblock
Clip: -
Sheath: in leatherette and fabric
Notes: Boar bristle brush, wooden gift boxop-8funghikit -
Lionsteel - SR2-G - Titanium Grey - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Used, but in good condition
* Commercially available Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Signs of wear on tip, right side.
* Marks on handle: Some slight marks on tang, wear marks on removable clip
* Box: Comes with original box
* Scabbard: -
* Manuals, Certificates and Warranties: Supplied with original warranty and accessories.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/Tactical
Production Type: Industrial
Country of Production: Italy
Blade: Sleipner steel 60/61HRC
Blade finish: satin-finished
Handle: Titanium 6Al4V monolithic
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 180mm.
Thickness when closed: 9mm.
Weight: 140g.
Closure: Frame Lock with Rotoblock security system
Clip: removable and reversible, stainless steel
Packaging: wooden box with Lion Steel logos
Notes: discontinued item, previously purchased, from private collectionAP-LS-SR2-G -
Sergio Consoli - Folder Liner Lock - PRIVATE COLLECTION - holographic resin handle - N ° 480
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019CON-480 -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
CRKT - Carson M16 knife EDC Frame Lock - M16-10KSF - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Black Oxide
Handle: 2CR13 stainless steel
Blade length: 75mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 82g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Kit CarsonCM16-10KSF -
Sergio Consoli - Custom Liner Lock folder - N ° 271 - PRIVATE COLLECTION - handmade knife
Intended use: Collection
Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009Acknowledgments
I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize as the best closable
but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.
Presentation of the craftsman
Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.
The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .
The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.
With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.
Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".
Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...CON-271 -
CRKT - Carson M21 EDC Frame Lock - M21-10KSF - knife
Use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade Treatment: Black Oxide
Handle: Stainless steel 2CR13
Blade length: 79mm.
Blade thickness: 2.4mm.
Closed Length: 102mm.
Overall length: 182mm.
Weight: 79g.
Closure: Framelock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with logos CRKT
Notes: Design by Kit CarsonCM21-10KSF -
Helle Norway - Skala Foldekniv knife - No.212
Intended use: hunting
Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -HE-212 -
Helle Norway - Dokka 3L - No.200 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115
Total length: 200mm.
Thick when closed: 1.8 cm
Weight: 130g.
Closure: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-200 -
Buck Lightning HTA II Pocket Knife - Model 175 - knife
Intended use: Sport
Type of production: Industrial
Production Lama USA
Blade: Stainless steel Aus-6
Treatment Lama: -
Handle material: aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 76g.
Lock: Liner Lock
Clip: Reversible and removable steel
Sheath: -
Packaging: cardboard box with logos Buck
Notes: -00175 -
Buck 171 Mayo Waimea BOS S30V Titanium Framelock Folding Pocket knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPM-S30V by Bos
Treatment Blade: Stonewashed
Handle material: titanium
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Thick when closed: 10mm.
Balance: -
Weight: 76g.
Closure: Frame Lock
Clip: Reversible and removable titanium
Sheath: -
Packaging: cardboard box with logos Buck
Notes: Hardened by Paul Bos - wooden box00171 -
CRKT - Drifter Razor-Sharp Edge G10 - 6450K - knife
What makes a good logo knife? It should be affordable, and it should have some large flat areas on the blade or frame suitable for logo imprinting. So we are very happy to present the Drifter series. They're high-quality knives that are priced low enough to purchase in quantity, and all have flat areas that are perfect for our "Company Billboard" imprinting by laser or silk screen. Or you can take any one to your local trophy house for personalized engraving.
The Drifter Stainless is a stainless steel frame-lock folder with a Razor-Sharp edge. The flat titanium nitride-coated frames are ideally suited for imprinting. It also features a 2.875" 8Cr14MoV stainless steel blade with a Razor-Sharp edge and a brushed finish. A stainless steel clip is included.Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Handle material: G10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 93mm.
Total length: 163mm.
Thick when closed: 14mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC6450K -
CRKT - Carson M16-14ZLEK Law Enforcement Zytel Folding Tanto - knife
The CRKT M16-14ZLEK Big Dog Law Enforcement knife is a Kit Carson design that is built for professional use. The black Zytel InterFrame handle has 420J2 stainless steel liners and CRKT's AutoLAWKS knife safety, which automatically actuates when the blade is open making it a virtual fixed blade. First responders will appreciate the integrated tungsten carbide window breaker and seat belt cutter. The pocket clip is 4-way reversible for every possible carry type, but not designed for tip-up in-pocket carry.
The Carson M16-14ZLEK features a black finished Tanto blade with a partially serrated cutting edge. The blade is easily opened with the dual thumb studs or a push of the Carson Flipper, which has an integrated seat belt cutter.
Specifications:
Overall Length: 9.25"
Blade Length: 3.75"
Blade Thickness: .14"
Blade Steel: AUS 8, HRC 55-57
Grind: Hollow
Handle Material: Zytel
Closed Length: 5.5"
Weight: 6.2 oz.
Made in TaiwanCM16-14ZLEK -
CRKT - Carson M16-13ZM Desert Camo - knife
CRKT M16-13 Desert Spear Point Folding Knife M16-13ZM has been developed specifically to blend into the desert environment. This CRKT knife features the super rigid InterFrame build with 420J2 stainless steel liners, threaded stainless steel back spacers, and Desert Camo pattern glass filled nylon scales. The spear point blade of the knife is non-reflective bead-blast finished AUS 4 stainless steel, crafted into a partially serrated combo edge that blends and almost disappears in the desert. The Columbia River M16-13 Desert Combo Edge Folder Knife is ideal when weight and bulk must be kept to a minimum, and it comes with a removable, single position clothing/gear clip for easier carrying. It also features Columbia River Knife & Tool's exclusive patented AutoLAWKS safety, which automatically turns the folder into a fixed blade when the blade is opened and locked. One-hand opening and closing is quick and smooth, the result of precision tolerances and lubrous washers at the blade pivot, and the dual ambidextrous thumb studs with checkered surfaces provide instant access in any circumstance. For a folding blade knife that's at home in the desert, choose the Columbia River Knife & Tool M16-13 Desert Camo Nylon Handle Folding Knife.
Knife Type: Folding Application: Tactical, utility Open Length: 8.25" Closed Length: 4.75" Weight: 3.5 oz Blade Length: 3.5" Blade Thickness: 0.1" Blade Material: AUS 4 stainless steel Blade Hardness: 55-57 HRC Blade Finish: Bead Blast Blade Grind: Hollow Blade Type: Spear point Blade Edge: Combo w/ triple-point serrations Handle Material: Glass-filled nylon Handle Finish: Desert Camo Liner Material: 420J2 Locking Mechanism: Locking liner Safety Mechanism: AutoLAWKS Pocket Clip: Yes, 1-position Additional Features: Carson Flipper M16-13ZM -
CRKT - Carson M21-12G TiNi G10 - knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Lama: China
Blade: stainless steel 8Cr14, 58-59 HRC
Treatment Blade: Titanium Nitride
Handle material: G10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 184mm.
Weight: 108g.
Lock: Liner Lock with Auto-closure LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: design by Kit CarsonM21-02GL -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
Lion Steel - SR-2A BS - Ergal Black - knife
Intended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Stainless Sleipner 60/61HRC
Treatment Blade: Black
Handle: 7075 piece
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 140g.
Closure: Frame Lock with security system Rotoblock
Clip: removable and reversible, stainless steel
Sheath: -
Packaging: cardboard box with logos Lion Steel
Notes: Design by PegLS-SR2ABB -
Pohl Force - Mike One Outdoor 1040 - knife
Intended Use: Tactical / Military
Type of production: Industrial
Production Blade: Italy
Blade: Stainless Niolox
Treatment Blade: satin
Handle material: G10 and Titanium
Blade length: 95mm.
Blade thickness: 5mm.
Closed Length: 122mm.
Total length: 216mm.
Thick when closed: 15mm.
Balance: -
Weight: 160g.
Closure: Frame Lock with security system Rotoblock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with nylon bag with zip and warranty certificates
Notes: Made in Italy by Lion Steel - knife with pin for one-handed opening10580SE -
Lion Steel - SR-2G - Matte Grey Titanium - Knife
Purpose strong>: Sport / Tactical
Type of production strong>: Semi-Industrial Production Lama
strong>:
Italy Lama strong>: Stainless Sleipner 60/61HRC
Privacy Lama strong>: - Handle
strong >: Titanium 6Al4V block
blade length strong>: 75mm.
blade thickness strong>: 4mm.
total length strong> : 180mm.
thickness when closed strong>: 9mm.
Balancing strong>: -
Weight strong>: 140g.
closing strong>: Frame Lock with security system Rotoblock
Clip strong>: removable and reversible, stainless steel sheath
strong >: -
Pack strong>: wooden box with logos Lion Steel
Notes strong>: Design by Peg p>LS-SR2G -
Pohl Force - Mike Two Outdoor 1042 - Knife
Intended Use: Tactical / Military
Type of production: Industrial
Production Blade: Italy
Blade: Stainless Niolox
Treatment Blade: satin
Handle material: G10 and Titanium
Blade length: 95mm.
Blade thickness: 5mm.
Closed Length: 122mm.
Total length: 216mm.
Thick when closed: 15mm.
Balance: -
Weight: 160g.
Closure: Frame Lock with security system Rotoblock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with nylon bag with zip and warranty certificates
Notes: Made in Italy by Lion Steel - knife without pin opening at hand10580S -
Pohl Force - Mike One Survival 1041 - knife
Intended Use: Tactical / Military
Type of production: Industrial
Production Blade: Italy
Blade: Stainless Niolox
Treatment Blade: Black
Handle material: G10 and Titanium
Blade length: 95mm.
Blade thickness: 5mm.
Closed Length: 122mm.
Total length: 216mm.
Thick when closed: 15mm.
Balance: -
Weight: 160g.
Closure: Frame Lock with security system Rotoblock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with nylon bag with zip and warranty certificates
Notes: Made in Italy by Lion Steel10580 -
CRKT - Montana Gentleman by Gallagher - 7402SK - coltello
Crkt - Montana Gentleman Grey 7402SK
Da oggi anche voi potrete possedere uno speciale coltello pieghevole di Barry Gallagher, noto e premiato knifemaker per i suoi coltelli costruiti con materiali esotici. Il Montana Gentleman è ispirato ad un suo precedente custom: Damascus Hummingbird già visto sulla rivista Blade.
La struttura InterFrame e il liner lock sono costruiti in acciaio 420J2, mentre la lama è in AUS 8 con un perno di apertura riempito di Kraton.
Acciaio: Aus 8 - 58 HRC
Lunghezza della lama: 65 mm.
Spessore della lama: 2.5 mm.
Lunghezza aperto: 160 mm.
Lunghezza chiuso: 90 mm.
Peso: 72 g.3061