Dicembre 2015

T4000 S Ranger Limited Edition is a limited series version of only 100 pieces based on the T4000 model, a reworking of the Japanese Wakizashi short sword that the Samurai carried at all times in contact with the body.

It is a timeless tactical tool that follows no fashion but faithfully adheres to the Extrema Ratio philosophy aimed at fulfilling all functional requirements.

This model continues Extrema Ratio's purest Tanto series designed especially for lovers of the Japanese blade profile, who do not want to give up typical tactical accessories such as textile sheath and special polymer handle.

The blade, made of Böhler N690 steel hardened to 58 HRC and burnished to MIL - C- 13924, features Geotech Camo customization, Extrema Ratio's innovative and original camouflage pattern made by laser engraving.

The grip, in HCS coloring, is made of Forprene, an elastomer that is part of the "NATO standard" due to its exceptional resistance to extreme conditions.

The black-colored Cordura sheath is and equipped with MOLLE system that allows its carrying on tactical vests and general belts and guarantees the safe carrying of the razor-sharp blade by protecting it from shocks that could reduce its efficiency.

The T4000 S Ranger Limited Edition comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weather, dust and shock resistant. Also inside is a double-grit sharpening plate (ceramic abrasive and synthetic diamond) and a metal plaque with the numbering of the limited series of 100.


Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Bohler N690Co stainless steel at 58HRC
Blade Finish: Burnishing MIL-C-13924 with Geotech pattern
Handle: Forprene
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 304mm.
Weight: 264g.
Sheath: Nylon
Packaging: Polymer case, diamond and ceramic sharpener, Limited run of only 100 pieces

Knife withdrawn from private collection. Very rare model made by Extrema Ratio with Borut Kincl ( Slovenian martial arts master and trainer of police and military special forces) no longer in production since 2009 - Overall in very good condition. Complete with cardboard box. Checked and certified by our in-house laboratory Coltelleria Collini.

Intended use: tactical/military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Blade Production: Italy
Handle: PVD
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 235mm.
Balance: -
Weight: 195g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Sheath: -
Notes: safety catch when knife is open

Translated with www.DeepL.com/Translator (free version)

ESTAS, marchio storico della Morocutti Giovanni, si contraddistingue per gli elevati standard di tutti i suoi strumenti nelle diverse categorie di prodotto: dal taglio al manicure, dall'estetica al pedicure. Tutti gli articoli sono prodotti in Italia, Germania, Francia a garanzia della tradizione di eccellenza e della costanza qualitativa.

Set da barba

• Pennello con pelo di tasso 1a scelta
• Bacinella
• Rasoio testina Fusion

TRADITIONAL - Shaving set from MÜHLE, Silvertip Fibre®, with safety razor, handle material chrome gold plated metal 3-piece shaving set without bowl, handles made of chrome gold plated metal highlights:

Shaving brush with Silvertip Fibre® Shaving brush size M = medium shaving brush head with 21 mm ring to unscrew

Safety razor with closed comb – classic blade

Stand made of metal, chrome-plated

The Material - Metal Without chrome the world would forfeit a lot of its lustre. In the finish used for our wet shaving accessories it demonstrates its best qualities: The material is corrosion-resistant, very long-lasting and has a luxurious, alluring lustre. When contrasted with this, the colours and shapes of other premium materials are shown to their very best advantage. The Brushhead - Silvertip Fibre® The high-quality synthetic fibres represent a world first of our own invention. We offer a synthetically produced premium quality whose material characteristics are analogous to those of the precious natural hair, silvertip badger. The majority of the users even say that this quality actually provides better performance characteristics than the natural hair. 'Silvertip Fibre®' is very soft at its fine tips, but somewhat more stable than natural hair in the middle section.

These characteristics produce a pleasant, soft sensation on the skin when the lather is applied, without having to forgo the desired firmness of the hairs in the lathering process. In daily use, the manually processed fibres are less sensitive than natural hair as they dry more quickly and are resistant to shaving soaps and creams. The completely vegan fibres are also somewhat easier to use than natural hair as they produce a particularly creamy and thick lather from a small amount of shaving soap or cream, which is used much more sparingly as a result. The semi-circular shape of the brush head is created by hand when binding the brush. The fine tips therefore do not require trimming and the natural softness of the hair is retained.

The Razorhead - Classic blade

For generations, the safety razor has been regarded as a stylish classic which can even shave edges with precision. For many, it is the razor par excellence. Its styling is ideally suited to the design of the MÜHLE products. Even if the open blade does demand a little respect at first: After a brief familiarisation period, and guided by a steady hand, it produces a very close shave and a lasting result. Unlike modern blade systems, the head of the safety razor does not move. The blades are replaced by unscrewing the cap.

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: USA
Handle: kryton
Blade length: 65mm.
Blade thickness: 4mm.
Length closed: -
Total length: 197mm.
Balancing: -
Weight: 100g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: China
Handle: rubber
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: -
Total length: 235mm.
Balancing: -
Weight: 160g.
Closing: -
Note: -
Sheath: cordura

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Use
Handle: kryton
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: -
Total length: 200mm.
Balancing: -
Weight: 76g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Use
Handle: kryton
Blade length: 160mm.
Blade thickness: 4mm.
Length closed: -
Total length: 283mm.
Balancing: set back - 2cm. from the guard branch
Weight: 166g.
Closing: -
Clip: -
Sheath: Leather
Note:

Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Green G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

United to the happiness of many fans, has re-proposed reproductions of the beautiful elven daggers of Legolas. Sold in pairs with the wooden display stand, the dagger blades measure 40 cm and have a maximum thickness of 5 mm;

total length 57 cm.

Weight each 438 g.

Intended use: Sport / Collection

Type of production: Industrial
Production blade: Use
Blade: Stainless steel CPM-S30V Steel Powder
Blade treatment: Black TiNi
Handle: G10
Blade length: 81mm.
Blade thickness: 4mm.
Length closed: 121mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 108g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: discontinued product and hard to find, very rare that you can find the version with black blade plain edge

Viper - Kyomi by Vox - Titanium and Carbon Fiber - V5934FC - knife

Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Carbon fiber
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 120g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Orange G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Kyomi is a compact frame lock knife which combines the unmistakable design of Jesper Voxnaes with innovative features, such as ball bearings and two different back spacers. Comfortable to hold and carry, thanks to smooth edges and a robust reversible titanium clip, it is available with the left scale made of different materials.

Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 156g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Intended use:Survival/utlity

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: Black G10
Blade length: 150mm.
Blade thickness: 5mm.
Overall length: 226mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 218g. (418g. Sheath)
Sheath: Nylon, MOLLE compatible
Packaging: Cardboard box with logos Maserin
Notes: designed by Nicolai Lilin

With the T4000 C continues the purest series so Extrema Ratio, for lovers of the profile of Japanese blades that do not want to give up the accessories typically tactical as sheath and handle.

Intended use: Tactical / Backup

Type of production: Industrial
Production Country: Italy
Blade: stainless steel Bohler N690Co to 58HRC
Treatment blade: Browning MIL-C-13924
Handle: Forprene
Blade length: 174mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 304mm.
Thick when closed: -
Balancing: -
Weight: 264g.
Closing: -
Clip: -
Sheath: Nylon
Packaging: Cardboard box with logos Extrema Ratio
Notes: -

Extrema Ratio - Panther Designed Borut Kincl - knife
Knife collaboration between Extrema Ratio and Borut Kincl trainer official special forces Slovenes "ESD"
Intended use: Tactical / Military
Type of production: industry
Blade: stainless steel N690Co 58HRC
Production Lama: Italy
Handle: Anticorodal
Blade length: 95mm.
Blade Thickness: 3mm.
Length closed: 140mm.
Overall length: 235mm.
Balancing: -
Weight: 210g.
Lock: Liner Lock
Clip: reversible and removable stainless steel
Sheath: -
Notes: safety locks to open knife

Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.

Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.

Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate

United - Hobbit Sword of Thranduil UC3042 - The Hobbit

Father to Legolas Greenleaf, Thranduil is a powerful Elf-Lord and a legendary fighter. King of the Woodland Realm, he rules over the northern lands of the great forest known as Mirkwood.

The sword of the Elvenking was one of two twin swords crafted for Thranduil by the finest smiths of the Woodland Realm. The blade and flowing hilt are forged with engraved vine and leaf symbols representing the forests of the Greenwood, all forged from a single piece of silver Elven steel.

This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. All officially licensed United Cutlery replicas feature the film logo and copyright notice laser engraved on the blade and are accompanied by a certificate of authenticity.

The Design of the Sword of Thranduil:

This replica features a stainless steel blade and cast metal hilt with authentic detailing to precisely match the movie prop. It is presented with a wood wall display featuring graphic motif of Thranduil. Includes a certificate of authenticity.

UC3042 Sword of Thranduil
Includes a parchment certificate of authenticity.
Overall Length: 41-7/8"
Blade Length: 30-3/4"
Highly Detailed Stainless Steel Blade
Authentically Detailed Metal Hilt and Parts
Presented with Wood Wall Mount Display

Tauriel is a Silvan Elf and daughter of Mirkwood. Her parents were killed by orcs when she was younger and it is hinted that Thranduil looked after her since then. She is a very young elf, around the age of 600, and is insightful into the changing nature of Middle Earth, recognizing the growing evils of the world and the need to eradicate them rather than withdraw into the safety of the elven fortress.

A favorite of King Thranduil and Captain of his Woodland Elven Guard, Tauriel is highly effective and lethal in combat, and primarily employs a reflex bow and two daggers in battle. She is also shown to possess medical knowledge, being able to treat wounds from poisoned weapons. As a native of the woodland realm, she is also a capable tree-climber and an adept leader.

This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. All officially licensed United Cutlery replicas feature the film logo and copyright notice laser engraved on the blade and are accompanied by a certificate of authenticity.

The Design of the Fighting Knives of Tauriel:

As Captain of the Woodland Guard, Tauriel carries signature twin daggers with blades forged of a bronzed alloy and a Silvan steel edge of superior strength. The hilts are crafted from greenwood with bronzed steel fittings. This replica is crafted of stainless steel with cast metal and polycarbonate handles, precisely detailed and colored to exactly match the movie prop. It is presented with a wood wall mount featuring graphic motif of Tauriel. Includes a certificate of authenticity.

UC3044 Fighting Knives of Tauriel
Includes a parchment certificate of authenticity.
Overall Length: 20-1/2"
Blade Length: 13-7/16"
Stainless Steel Blades with Cast Metal & Polycarbonate Handles
Wall Mount Display with Graphic Motif of Tauriel

Kukri Artisan - Panawal horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Dhankute Silver - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and silver
Blade length: 320mm.
Blade Thickness: 10mm.
Overall length: 440mm.
Karda: length. tot. 6.3mm.
Chakmak: length. tot. 6.3mm.
Weight: ì (774g. Sheath)
Sheath: horn and Nepalese symbols silver
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Dhankute 11 "horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Uso Consigliato: verdura, carne cruda, pesce

Produzione: Idaho, USA
Lama: in acciaio inox CPM-S35VN con finitura Silver PVD
Taglio: di tipo asimmetrico, non adatta a mancini
Lunghezza Lama: 165mm.
Lunghezza Totale: 286mm.
Impugnatura: Ultem 1000 (un particolare polimero incredibilmente resistente ad abrasioni e ad alte temperature)
Spessore Lama: 3.8mm.
Peso: 179g.

** SOLD OUT - OUT OF STOCK AND OUT OF PRODUCTION ** 

This is a Collini Cutlery Exclusive - Only available in 100 serialized pieces

Intended Use: collection / EDC / CQD
Type of production: industrial, Limited
Blade: N690 stainless steel in 58HRC with hollow ground fuller
Blade Treatment: Black Testudo
Blade Production: Italy
Handle: Titanium machined from solid.
Closing system: Frame Lock with swing and safe removable stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 190g.
Clips: stainless steel, reversible, deep pocket, tip up
Notes: Conical Skull Crasher engaged in the shank - Limited and serialized edition in only 100 pieces
Box: Cardboard, serialized, with Extrema Ratio and Coltelleria Collini logos

Intended use:Survival/utlity

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: Green G10
Blade length: 150mm.
Blade thickness: 5mm.
Overall length: 226mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 218g. (418g. Sheath)
Sheath: Nylon, MOLLE compatible
Packaging: Cardboard box with logos Maserin
Notes: designed by Nicolai Lilin

The Megalodon 1.0 was created specifically for a versatile tool in the context of survival and of 'outdoor. Characterized by simple geometries studied during a long period of design and testing, the Megalodon combines the power and simplicity to help its user even in extreme situations.
Intended Use: Tactical / Collection

Type of production: Artisan

Production Lama: Italy
Blade: D2 steel with heat treatment cryogenic 60.3 HRC
Treatment Lama: Black Gunkote
Handle: G10
Blade length: 140 mm.
Blade thickness: 5.5 mm.
Overall length: 300 mm.
Balance: the branch guard
Weight: 454 g.
Sheath: Handmaded, Kydex thermoformed
Packaging: -
Note: each knife is unique because it is made by hand, could therefore be small differences / inaccuracies with respect to the model photographed.

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Laguiole En Aubrac - olive wood with knife in sanmai Japanese - knife collection

Intended Use : Regional / Collection

Type of production : craft
Blade: damascus steel and laminated VG10 Japanese
Production Lama : France
Handle: olive wood
Blade length : 100mm .
Blade Thickness : 3mm.
Closed Length : 120mm .
Overall length : 220mm .
Balancing : -
Weight: 84g .
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Laguiole En Aubrac - Buffalo horn with sanmai Japanese blade - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: damascus steel and laminated VG10 Japanese
Production Lama: France
Handle: Buffalo Horn
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 90g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Intended use: Tactical Collection
Type of production: Industrial
Blade: 440C steel 58/60 HRC
Treatment Blade: -
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: 1cm back from the branch guard
Weight: 284g.
Closure: Back Lock
Case: Cordura
Packaging: cardboard box with logos Pohl Force
Notes: numbered and certified production. 500pcs limited edition

Spartan Blades - Phrike - Self-Defense Utility Desert - Knife

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Flat Dark Earth SpartaCoat
Handle: G-10
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Total length: 215mm.
Thick when closed: -
Balance: -
Weight: 115g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

Ingredior: "io entro".
Lo specialista, la versione più spinta della serie MF, ha una punta studiata per ottenere la massima penetrazione mentre la doppia guardia aumenta la sicurezza nei colpi di punta.

Destinazione d'uso: Tattico

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: Testudo
Manicatura: Anticorodal con frangivetro in acciaio inox
Lunghezza lama: 112mm.
Spessore lama: 4mm.
Lunghezza chiuso: 150mm.
Lunghezza totale: 265mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 200g.
Chiusura: Liner Lock con sicura addizionale
Clip: Acciaio inox
Fodero: Nylon Nero, compatibile MOLLE, con chiusura in Velcro
Confezione: Scatola di cartone con loghi Extrema Ratio
Note:

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: coperto
Aunlo-Bal: disegno inciso nero e oro
Manicatura: legno e ottone
Lunghezza lama: 260mm.
Spessore della lama: 11mm.
Lunghezza totale: 400mm.
Karda: lungh. tot. 55mm.
Chakmak: lungh. tot. 55mm.
Peso: 414g. (574g. con fodero)
Fodero: in ottone e legno
Note: Coltello originale nepalese interamente realizzato a mano

Kukri Artisan - Chainpure engraved - Medium

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: Engraved in black and gold and a drawing of a circle
Handle: Wood engraved
Finishes: Brass
Blade length: 260 mm.
Blade Thickness: 8 mm.
Overall length: 410 mm.
Weight: 460g.
Sheath: engraved wood and brass
Notes: Original Nepalese knife made entirely by hand

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Blade treatment: -
Handle: Iron Wood
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 194mm.
Thick when closed: 17.5mm.
Balancing: -
Weight: 92g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Packaging: cardboard box with Mcusta logos
Note: -

This knife is used exclusively by the United States Marine Corps and has been manufactured by the Ontario Knife Company for many years now.

Intended use: military / collection

Type of production: Industrial
Production Lama: America
Blade: 1095C carbon steel
Blade treatment: Phosphates
Handle: Painted leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 305mm.
Thick when closed: -
Balance: set back, at 1cm.
Weight: 284g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: transparent plastic bag
Note: -

Intended use: sports

Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: Italy
Handle: Aluminum and Olive Wood
Blade length: 103mm.
Blade thickness: 4mm.
Length closed: -
Total length: 223mm.
Balancing: set back - 4cm. from the guard branch
Weight: 234g.
Closing: -
Clip: -
Sheath: Leather
Notes: produced by CCN - Consorzio Coltellerie Maniago

La United per la felicità di tantissimi fans, ha riproposto le riproduzioni delle bellissime daghe elfiche di Legolas. Vendute in coppia con il supporto di legno per l'esposizione, le lame delle daghe misurano cm 40 e hanno uno spessore massimo di 5 mm; la lunghezza totale è invece di cm 57. Peso cad. 438 gr.

Questi prodotti sono accompagnati da certificato di autenticità United e dalle licenze della New Line Cinema e sono tratti dalla serie the Hobbit.