Nordic Ware - Vaulted Cathedral Bundt Pan
Reminiscent of European Gothic arches and lofty ceilings, this Bundt pan makes a fabulous vaulted cake!
Product Details:
Cast Aluminum
Interior Dimensions: 9 Cup (2,129 l)
Product Weight: 1.6 lbs (0,726 kg)
Made in the USA
Use & Care
Before initial use and after subsequent uses, hand wash with warm, soapy water. Dishwasher use is not recommended, as it may shorten the life of the nonstick coating on your pan. Before each use, brush with solid vegetable shortening and dust with flour or cocoa, or use baking spray with flour in it. Mixes and recipes may vary. Fill the pan no more than ¾ full to avoid overflow. Metal utensils, scouring pads and abrasive cleaners should not be used on nonstick surfaces.
A beloved yeast cake from Europe, Kugelhopf is renowned for it's not overly sweet crumb and its distinctive angled, sweeping shape. This pan enables you recreate the traditional dessert, which has been enjoyed for generations in France, Germany, Switzerland and Austria.
Commercial-quality Bundt pan produces a beautifully sculpted cake.
Cast aluminum ensures crisp detail.
Center tube conducts extra heat to the middle of the cake for even baking.
Nonstick interior ensures that cakes turn out perfectly every time.
Made in the USA by Nordic Ware, a family-owned company famous for its fine bakeware since 1946.
9" diam., 5" high.
10-cup cap.
Made in USA.
Made in Italy - Rolling pin 44 cm ultralight
The innovative rolling pin professional superlight, manoeuvrable, absolutely hygienic, which is also an airtight container where necessary insert hot or cold liquids to maintain proper working temperature.
Lightness synonymous with comfort
It is usual to think that the yield sull'impasto is due to the weight of the rolling pin and therefore the greater the yield.
In fact the yield depends on the force exerted by the arms and the diameter of the rolling pin.
the Mattarello has been studied is made to facilitate the processing of any type of pasta.
E 'with two seals spherical silicone, ensuring a tight seal, allow to fill a rolling pin with hot liquids to soften hard dough or cold liquids to compact soft cheeses.
For a homogeneous surface cooling the rolling pin can be placed in the refrigerator a few minutes before processing. (Ideal for pastry).
Technical features:
Rolling pin length of 44cm diameter cm. 5.8.
2 balls silicone closure.
ultralight
elegant
comfortable
pan and hygienic
recyclable aluminum
Available colors: gray or gunmetal.
ReAllum® The Rolling Pin Rolling Pin is the first nice to use, nice to see, nice to have and nice to make a gift ..
Made in Italy - Rolling pin 24 cm ultralight
The innovative rolling pin professional superlight, manoeuvrable, absolutely hygienic, which is also an airtight container where necessary insert hot or cold liquids to maintain proper working temperature.
Lightness synonymous with comfort
It is usual to think that the yield sull'impasto is due to the weight of the rolling pin and therefore the greater the yield.
In fact the yield depends on the force exerted by the arms and the diameter of the rolling pin.
the Mattarello has been studied is made to facilitate the processing of any type of pasta.
E 'with two seals spherical silicone, ensuring a tight seal, allow to fill a rolling pin with hot liquids to soften hard dough or cold liquids to compact soft cheeses.
For a homogeneous surface cooling the rolling pin can be placed in the refrigerator a few minutes before processing. (Ideal for pastry).
Technical features:
Rolling pin length of 44cm diameter cm. 5.8.
2 balls silicone closure.
ultralight
elegant
comfortable
pan and hygienic
recyclable aluminum
Available colors: gray or gunmetal.
ReAllum® The Rolling Pin Rolling Pin is the first nice to use, nice to see, nice to have and ... nice to make a gift
Pulltex - Wine & Champ Celebration Kit - 4 PIECES
Pulltex is the most important brand of wine accessories that provides a wide range of corkscrews and other accessories for professional wine lovers. With more than 20 years of experience in this field, now it occupies first place in the market. The corkscrew of Pulltex are protected with more than 20 international patents especially the patent for the original double lever corkscrew, as well as the double lever and retractable. These patents are a revolution for all the waiters
Pulltex brand is on the market with a smaller number of wine accessories and with the idea of offering a better and easier. After the first lever corkscrew, and 'was launched on the market PULLTAP'S who reinvented a whole new way to uncork a bottle of wine, the patent has been around the international market
Currently, Pulltex is a brand well-placed on the market, offering a full range of accessories designed for all times used to serve wine. Pulltex is and stands for innovation, design, the 'originality, functionality and most importantly, the quality of its products.
News by Pulltex:
September bucket, wine and sparkling wine - Celebration Kit .Cavatappi retractable double lever allows you to remove the plugs effortlessly into two phases. The pump saves wine takes air from the bottle and keeps the wine for days, while it can also be used as a stopper. The plug-uncork champagne facilitates extraction of champagne cork with little risk and effort. It also acts as a cap once the bottle has been opened.
The bucket has an ergonomic design and present. It has two handles for easy transport and a slot for easy emptying. And 'produced in high density plastic, resistant to shocks and variations temperatura.Colore: gold
Article on reservation - available from December 15, 2017
Intended use: heavy duty / hiking / tactical / collection Type of production: hand-made blade and handle - industrial titanium folders Country of production: Italy Blade: D2 steel at 59 / 61HRC with cryogenic hardening Blade Treatment: Raw Handle: titanium folding handles with micarta handle Blade Length: 90mm. Blade thickness: 5mm. Closed length: 120mm. Total length: 210mm. Weight: 150g. Opening: Carson Flipper system / bobbin opening pins on the blade Washers: Steel, with ball bearings made in Japan Closure: Rockers Arm 8.11 Clip: Stainless steel removable and reversible Packing: Plastic case with Wander Tactical logos
Fine or coarse--flavor your food with just the right amount of spice with the press of a button on this adjustable mill electric grinder. From Kyocera.
Includes CME-50BK electric grinder and manual
One button touch operation..
Adjustable mill allows for fine to coarse grinds.
For salts, peppercorns, seeds, and more.
Burr grinding mechanism made from ceramic.
Requires 4 AA batteries, not included.
Measures approximately 10-3/8" x 3-1/4" x 3-1/4".
Hand wash.
1-year Limited Manufacturer's Warranty
Adhoc - Gift Set MUSCATINO
Muscat meets delicate! Nutmeg, beetroot, celery and semolina dumplings are four excellent ingredients for a delicious, autumnal soup. The gift set Muskatino with recipe contains the most important utensils and one of the four main ingredients - the nutmeg - for the delicious dish.
The set contains three noble nutmeg from Grenada, which can be rubbed fast with the manual muscatmeat. The nuts can be kept protected in the transparent aroma protection container of the mill. The recipe for the autumn red beet and pumpkin soup is also included in the set.
The Adhoc set from Mushino is a great gift for gourmets and cooking fans.
1 PM87 Muscat mill MUSKATINO
3 Noble nutmeg from Grenada
1 recipe of beetroot soup
1 Multibag
Betty Bossi - Magic Cube
Magic Cube – Little effort, big wow effect!
The fun pinwheel sails, pretty parcels and sleek little boats are all created in a matter of
seconds: simple, fast and completely homemade. You can mix and match the shapes and
fillings however you want. Award winning product of KitchenInnovation of the Year® 2017
with «special mention» for product benefit, functionality and innovation in the categorie
cooking and kitchen ustensils.
The Magic Cube, an in-house development by Betty
Bossi, is suitable for both sweet and savoury
creations made from puff pastry, cake dough or tart
pastry.
A recipe booklet with ideas and lots of really quick
fillings for delicious, but reliably perfect pastries in
three different shapes, comes free with your
purchase to inspire you just that little bit more ..
This innovative, compact tool is made from plastic with three inserts. Colours: dark red and grey.
Dishwasher safe. Dimensions (LxWxH): 11×9×9.5 cm.
The most popular of the Leatherman pliers is now available in a new limited edition in Silver & Black color
Tools: Stainless Steel Handle: Stainless Steel Closed length: 100 mm. Open length: 160 mm. Weight: 238 g. Sheath: shaped, in Leather or Cordura (according to availability), with vertical or horizontal fixing
Endowment: Plier with thin points Cable Cutters Flat-blade knife Serrated knife File for iron File for wood Diamond file Saw Screwdriver connection Precision screwdriver insert Large flat screwdriver Precision flat screwdriver Phillips screwdriver Precision Phillips screwdriver 19cm ruler. Bottle opener / can opener Cable strippers Hole for transport
Type of production: Industrial Country of production: USA Blade: 420HC stainless steel Blade treatment: Satind Handle: Nylon Blade length: 65mm. Blade thickness: 2mm. Length closed: 100mm. Total length: 1654mm. Thick when closed: 14mm. Balancing: - Weight: 72g. Opening: Opening pin on the back of the blade Washers: in brass Closure: Liner Lock Clip: stainless steel, removable Sheath: - Packaging: Cardboard box with Leatherman logos Notes: Carabiner / retractable bottle opener
Luminox Watches - ANU steel strap with NATO - 4221.CW Series
ANU - Authorized for Navy Use
Date: 3 hours Movement (technology): Quartz Swiss Made Size of the outer diameter (mm): 45 mm Case: Stainless steel PVD black Bezel: Stainless steel revolving Case back: Screwed Crown: screw with double O-ring Crystal: Scratch-resistant sapphire antireflective Water resistance (m / ft / atm): 200/660/20 Strap: Nato Lighting: light sources permanent Trigalight (Guaranteed 25 years) Warranty: 2 years
Serrated blade in 420HC stainless steel Medium screwdriver Apripacchi Bottle opener can opener Phillips screwdriver Ruler (1 in / 2.54 cm) Scissors Medium screwdriver Pliers with pointed spouts and spring opening Normal pliers with spring opening Spring-loaded cutter Cable Cutters File for iron and wood
Details: 25 year warranty External blades with liner lock closure Removable clip Stainless steel body Stainless steel handles
Dimensions: Blade length: 6.6cm. Length when closed: 9.7cm. Weight: 198.4g.
Type of production: Industrial Country of production: USA Blade: 420HC stainless steel Blade treatment: Satind Handle: Nylon Blade length: 65mm. Blade thickness: 2mm. Length closed: 100mm. Total length: 1654mm. Thick when closed: 14mm. Balancing: - Weight: 72g. Opening: Opening pin on the back of the blade Washers: in brass Closure: Liner Lock Clip: stainless steel, removable Sheath: - Packaging: Cardboard box with Leatherman logos Notes: Carabiner / retractable bottle opener
Bread maker for delicious homemade bread, cake, jam and many more
18 automatic programs, e.g. gluten-free bread
Individual program for temperature and time, incl. memory-function
Weight (500, 750, 1000 g) and degree of browning (light, medium, dark) adjustable
Removable nonstick coated baking pan
Touch control with wide display
Timer and delayed start up to 15 h adjustable
Lid with glass window
Automatic keeping warm up to 1 h
Incl. measure cup, measure spoon & recipes.
Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards
Led: 1x Cree XP-G2 S3 with a life cycle of 50,000 hours and with a lighting diameter of 100 ° Operating Modes: 4 light powers, selectable with the dedicated dedicated button Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) Peak of power: 1020 candles Maximum illumination distance: 64m. Ignition method: Power on and off button Light selection method: Light selection button Body: aeronautical aluminum with anodizing degree HA III Battery: Integrated 280mAh Li-Ion type, equipped with integrated MicroUSB charging system Measurements: 4.33cm (Lenght) - 2.54cm (Width) - 1.15cm (Thick) Weight: 13.4g. - battery included Accessories: steel ring for attachment to the key ring Waterproof: as per IP54 standard, it resists dust and light splashes of water Impact resistance: withstands drops from 1.5m in height Notes: Equipped with integrated charging system via MicroUSB port (cable not included in the package); when charging, an integrated LED will show the status and it will switch off automatically when the charging is complete. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The rear hook of the torch, designed to anchor it to a key ring or other equipment, withstands a traction of up to 30kg.
Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards
Led: 1x Cree XP-G2 S3 with a life cycle of 50,000 hours and with a lighting diameter of 100 ° Operating Modes: 4 light powers, selectable with the dedicated dedicated button Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) Peak of power: 1020 candles Maximum illumination distance: 64m. Ignition method: Power on and off button Light selection method: Light selection button Body: aeronautical aluminum with anodizing degree HA III Battery: Integrated 280mAh Li-Ion type, equipped with integrated MicroUSB charging system Measurements: 4.33cm (Lenght) - 2.54cm (Width) - 1.15cm (Thick) Weight: 13.4g. - battery included Accessories: steel ring for attachment to the key ring Waterproof: as per IP54 standard, it resists dust and light splashes of water Impact resistance: withstands drops from 1.5m in height Notes: Equipped with integrated charging system via MicroUSB port (cable not included in the package); when charging, an integrated LED will show the status and it will switch off automatically when the charging is complete. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The rear hook of the torch, designed to anchor it to a key ring or other equipment, withstands a traction of up to 30kg.
Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards
Led: 9x CRI diodes> 90 with warm light (4500K) with a life cycle of 50,000 hours and with a diameter of 360 ° Operating Modes: 3 light powers, selectable with the appropriate dedicated button and 3 signaling modes Powers and Durations: 250 Lumens (1h.) -> 65 Lumens (5.15h.) -> 8 Lumens (38h.) -> Caution Light -> S.O.S. -> Beacon Light Power peak: 38 candles Maximum illumination distance: 24m diameter. Ignition and selection method luminsa: Power on / off and selection button Body: ABS Batteries: Rechargeable Li-Ion from 4.44Wh, integrated, equipped with a MicroUSB charging system Measurements: 6.55cm (Alt.) - 5cm (Width) - 2.48cm (Thick) Weight: 49g. - battery included Accessories: front elastic band Impermeability: as per IP66 standard, it resists strong jets of water from every direction Impact resistance: withstands drops from 1.5m in height Notes: Equipped with an integrated charging system via a MicroUSB port; when charging, an integrated LED will show the status and it will switch off automatically when the charging is complete. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The base of the torch has integrated a hook to hang it - The base of the torch has integrated a magnet to anchor it to the magnetic surfaces.
Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards
Led: 9x CRI diodes> 90 with warm light (4500K) with a life cycle of 50,000 hours and with a diameter of 360 ° Operating Modes: 3 light powers, selectable with the appropriate dedicated button and 3 signaling modes Powers and Durations: 250 Lumens (1h.) -> 65 Lumens (5.15h.) -> 8 Lumens (38h.) -> Caution Light -> S.O.S. -> Beacon Light Power peak: 38 candles Maximum illumination distance: 24m diameter. Ignition and selection method luminsa: Power on / off and selection button Body: ABS Batteries: Rechargeable Li-Ion from 4.44Wh, integrated, equipped with a MicroUSB charging system Measurements: 6.55cm (Alt.) - 5cm (Width) - 2.48cm (Thick) Weight: 49g. - battery included Accessories: front elastic band Impermeability: as per IP66 standard, it resists strong jets of water from every direction Impact resistance: withstands drops from 1.5m in height Notes: Equipped with an integrated charging system via a MicroUSB port; when charging, an integrated LED will show the status and it will switch off automatically when the charging is complete. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The base of the torch has integrated a hook to hang it - The base of the torch has integrated a magnet to anchor it to the magnetic surfaces.
- attacco fucile creato appositamente per i modelli Nitecore - compatibile anche con modelli di altre marche con fusto di diametro di 1" / 2.54cm
Attraverso questo attacco, è possibile fissare una torcia ad un fucile o a qualsiasi tipo di supporto cilindrico tramite doppio aggancio magnetico. - Materiali: alluminio aeronautico anodizzato - Misure: 50mm lunghezza x 55mm altezza - Diametro utile torcia: da 24mm a 27mm
Intended use: Tactical Type of production: Industrial Country of production: Taiwan Blade: in steel D2 Blade treatment: Black Powder Coating Handle: in Griv-Ex polymer, with steel knob Blade length: 171mm. Blade thickness: 5mm. Total length: 298mm. Thick when closed: 13mm. Balancing: Set back Weight: 332g. Sheath: Secure-Ex in ABS, from thigh Packaging: Cardboard box with Cold Steel logos Note: -
Intended use: Tactical Type of production: Industrial Country of production: Taiwan Blade: in steel D2 Blade treatment: Black Powder Coating Handle: in Griv-Ex polymer, with steel knob Blade length: 171mm. Blade thickness: 5mm. Total length: 298mm. Thick when closed: 13mm. Balancing: Set back Weight: 332g. Sheath: Secure-Ex in ABS, from thigh Packaging: Cardboard box with Cold Steel logos Note: -
The Valence (pronounced "VAY-LENCE") is a CCW technology (concealed carry weapon) shoulder bag with adjustable belt for right or left side transport. The backpack can easily be transformed from a shoulder bag and vice versa. It has a padded main compartment, with dual access, closed by a double zipper equipped with lockable sliders, designed to accommodate laptops / tablets up to 13 inches. It also has a CCW back compartment with a double hook security lock.
GENERAL TECHNICAL CHARACTERISTICS OF MAXPEDITION PRODUCTS
* 1000-denier ballistic nylon resistant to water and abrasion * DuPont Teflon Fabric Protector treatment to make the Nylon resistant to dirt and dust * YKK high resistance hinges * Stress points joined together with double, triple, square and X stitching * UTX-Duraflex Nylon buckles to guarantee maximum silent opening and closing * Nylon stitching with very high tensile strength * Vulcanized padding with polysulfides of Robac AS-100 xacenic acid to guarantee maximum shock absorption * Internal seams taped and vulcanized * Drawstring and cordages made of military grade paracord
VALENCE FEATURES
* Internal volume of 10L * Overall dimensions of 27.9x14x36.8cm * Front pocket of 24.8x5.1x35.6cm * Main compartment of 24.1x7.6x36.8cm * CCW compartment of 24.1x35.6cm * Weight of 816g. * Ambidextrous single shoulder bag * Removable belt with double quick release * Closure with bidirectional zip closable with padlock
MAINTENANCE
* Wipe a clean and damp cloth on the surface and wait for the product to dry naturally. * Do not machine wash * Do not dry clean * Do not use detergents or bleaches * Do not iron
The PUP (Phone Utility Pouch) model has an easy-access external pocket designed to safely store and transport mobile phones or radios.
The unique design allows you to extract the mobile phone / radio with a single gesture. The lateral elastic retention keeps the cellphone or radio in place securely. There is also a main zippered compartment with a mesh pocket to organize everything at its best.
The PUP is supplied with two TacTie PJC3 rear clips made of polymers designed for the modular attachment to any surface compatible with MOLLE type systems such as ATLAS or PALS.
* Total dimensions: 8.9x7.6x15.2cm * Front pocket: 8.9x4.5x13.3 / 17.8 (max) cm * Main Bought: 8.9x5.1x15.2 * Weight: 130g
GENERAL TECHNICAL CHARACTERISTICS OF MAXPEDITION PRODUCTS
* 1000-denier ballistic nylon resistant to water and abrasion * DuPont Teflon Fabric Protector treatment to make the Nylon resistant to dirt and dust * YKK high resistance hinges * Stress points joined together with double, triple, square and X stitching * UTX-Duraflex Nylon buckles to guarantee maximum silent opening and closing * Nylon stitching with very high tensile strength * Vulcanized padding with polysulfides of Robac AS-100 xacenic acid to guarantee maximum shock absorption * Internal seams taped and vulcanized * Drawstring and cordages made of military grade paracord
MAINTENANCE
* Wipe a clean and damp cloth on the surface and wait for the product to dry naturally. * Do not machine wash * Do not dry clean * Do not use detergents or bleaches * Do not iron
Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards
Led: 1x Cree XP-G2 S3 with a life cycle of 50,000 hours and with a lighting diameter of 100 ° Operating Modes: 4 light powers, selectable with the dedicated dedicated button Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) Peak of power: 1020 candles Maximum illumination distance: 64m. Ignition method: Power on and off button Light selection method: Light selection button Body: aeronautical aluminum with anodizing degree HA III Battery: Integrated 280mAh Li-Ion type, equipped with integrated MicroUSB charging system Measurements: 4.33cm (Lenght) - 2.54cm (Width) - 1.15cm (Thick) Weight: 13.4g. - battery included Accessories: steel ring for attachment to the key ring Waterproof: as per IP54 standard, it resists dust and light splashes of water Impact resistance: withstands drops from 1.5m in height Notes: Equipped with integrated charging system via MicroUSB port (cable not included in the package); when charging, an integrated LED will show the status and it will switch off automatically when the charging is complete. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The rear hook of the torch, designed to anchor it to a key ring or other equipment, withstands a traction of up to 30kg.
KitchenCraft Paul Hollywood
Non-Stick Pizza Peel
The ultimate tool – transfer pizzas and large tarts
with ease. With a large flat plate for easy transfer
and a folding handle for easy compact storage.
Plate size 40cm x 30cm (15¾” x 12”). Sleeved.
Tipo de producción: Industrial Producción de Lama: China Hoja: acero inoxidable 440 C Tratamiento lama: negro Manija: Black G10 Longitud de la hoja: 140 mm. Espesor de la cuchilla: 6 mm. Longitud cerrada: - Longitud total: 275 mm. Espesor cuando está cerrado: - Equilibrio: - Peso: 395g. Cierre: - Clip: - Funda: Cordura, con M.O.L.L.E. Embalaje: caja de cartón con logotipos de BlackFox, Combate de cuchillos Book All Points autografiado por el autor, Mochila Notas: Diseño de Garcia Amadori
Realizzato utilizzando solo ingredienti 100% naturali e "vegan friendly" con Olio di cocco, mais, essenza di Lime, lanolina ed arricchito con vitamina E, questo dopobarba rinfrescante ed emoliente per viso, vi idraterà e calmerà le irritazioni.
E' confezionato in un pratico flacone plastico da 60g con tappo a vite in alluminio. Per la massima efficacia scioglierne una minima quantità nel palmo delle mani ed applicarlo su viso e collo con un leggero massaggio.
Three-in-one functionality, high-quality finish and great ease of use: take Victorinox Wine Master with you and enjoy outdoor adventures with the taste of good life.
The long and sturdy spiral firmly grips the cap, the aluminum size ensures clean and precise cuts and the solid two-stage lever protects from slipping, ensuring a safe removal of the cap. Finally, a knife with an extra high blade, which can make its way into all your favorite picnic snacks, is the final touch that makes Wine Master the perfect multi-purpose tool.
You can see refinement in the ideal action of the fulcrum and in the precision of the details, which minimize the effort required. The cheeks are finished in a selection of precious olive or walnut wood, and combine a comfortable grip and an elegant look.
All of this makes Wine Master an exclusive gift, which immediately fascinates wine lovers and becomes their loyal companion.
Robust multi-purpose knife / sommelier corkscrew manufactured by the Swiss company Victorinox characterized by the walnut wood handle.
Technical features: - 93 mm blade with liner lock - professional sommelier corkscrew - paper cutter for wine - bottle opener / bottle opener - genuine leather sheath
Three-in-one functionality, high-quality finish and great ease of use: take Victorinox Wine Master with you and enjoy outdoor adventures with the taste of good life.
The long and sturdy spiral firmly grips the cap, the aluminum size ensures clean and precise cuts and the solid two-stage lever protects from slipping, ensuring a safe removal of the cap. Finally, a knife with an extra high blade, which can make its way into all your favorite picnic snacks, is the final touch that makes Wine Master the perfect multi-purpose tool.
You can see refinement in the ideal action of the fulcrum and in the precision of the details, which minimize the effort required. The cheeks are finished in a selection of precious olive or walnut wood, and combine a comfortable grip and an elegant look.
All of this makes Wine Master an exclusive gift, which immediately fascinates wine lovers and becomes their loyal companion.
Robust multi-purpose knife / sommelier corkscrew manufactured by the Swiss company Victorinox characterized by the olive wood handle.
Technical features: - 93 mm blade with liner lock - professional sommelier corkscrew - paper cutter for wine - bottle opener / bottle opener - genuine leather sheath
Panthera is a new folding that retains all the features of the T-Razor, from which it draws inspiration, with the difference that the dorsal part of the blade goes down towards the tip, like the wharncliff blades. The knife presents the new Razor opening high speed opening system.
Intended use: Sports / Tactical
Type of production: industrial Blade: stainless steel N690Co 58HRC Country of production: Italy Handle: Anticorodal Anodised aluminum Blade length: 100mm. Blade thickness: 3mm. Length closed: 165mm. Total length: 247mm. Weight: 130g. Closure: Liner Lock Clip: absent Sheath: absent Note: -
Panthera is a new folding that retains all the features of the T-Razor, from which it draws inspiration, with the difference that the dorsal part of the blade goes down towards the tip, like the wharncliff blades. The knife presents the new Razor opening high speed opening system.
Intended use: Sports / Tactical
Type of production: industrial Blade: stainless steel N690Co 58HRC Country of production: Italy Handle: Anticorodal Anodised aluminum Blade length: 100mm. Blade thickness: 3mm. Length closed: 165mm. Total length: 247mm. Weight: 130g. Closure: Liner Lock Clip: absent Sheath: absent Note: -
The artisans of Berkel have created an exclusive series of switchblade knives. The search for steel for the blade and fine materials for the handle, make these knives real collectibles. These unique pieces are numbered one by one by Berkel's cut masters.
- Blade material: Damaged steel San Mai 67 VG10 (60/61 HRC) - Blade length: 11 cm long blade - Total length: 25 cm - Weight: 95 gr - Sharpening: Smooth - Handle: Composed of two wooden grips. Decorated with glossy black logo. - Notes: Wooden gift box and scabbard.
Features • Premium CREE XP-G2 (R5) LED • Maximum output of 430 lumens • Integrated “Precision Digital Optics Technology” provides extreme reflector performance • Boasts a peak beam intensity of 19,321cd and a throw distance of up to 278 meters • High efficiency circuit board provides up to 520 hours runtime • Side switch interface provides one-handed operation and easy access to all flashlight functions • Side switch features a power indicator light displays remaini ng battery power (patented) • Power indicator ’s secondary function displays battery voltage (accurate to 0.1V) • Intelligent memory function stores preferred brightness setti ng • Integrated impact resistance mechanism with reverse polarity protection (patented) • Flashlight head retaining ring protects the core components f rom damage • Toughened ultra-clear mineral glass with anti-reflective coating • Constructed from aero grade aluminum alloy with HAIII militar y grade hard-anodized finish • Waterproof in accordance with IPX-8 (two meters submersible) • Impact resistant to 1.5 meters • Stainless steel titanium-plated two-way clip included • Tail stand capability
The new Nitecore NL1834R 18650 battery is a revolutionary battery designed with a built-in micro-USB charging port making charging easier than ever! No more need for an extra charger as this battery can be charged directly using a standard micro-USB charging cable (sold separately). Simply plug the battery into an available power source and a red indicator light under the + pole will turn green upon completion. Alternatively, these batteries can still be charged on an external charger if desired. The NL1834R batteries are designed for powering high drain devices such as high-output flashlights, lanterns, headlamps, and bike lights, as well as a variety of other appliances and devices. With built in smart charging circuitry built and other integrated safety features through-out, this battery will safely work in the majority of button-top compatible devices.
Features & Specifications: Type: Nitecore NL1834R 18650 3.7V Protected Li-ion rechargeable battery Capacity: 3400mAh Voltage: 3.7V Output: 12.24Wh USB Charging Voltage: 5V USB Charging Current: 800mA (Maximum) Chemistry: Lithium-ion Weight: 1.52oz (47.3g) Length: 2.68in (68mm) Diameter: 0.72in (18.3mm) Protected: Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V Recharge: up to 500+ cycles Red & Green charging indicator LED's Microporous barrier and pressure release valves help protect the battery and prevent damage caused by rapid expansion & combustion 12 Month Warranty Period
The new Nitecore NL1826R 18650 battery is a revolutionary battery designed with a built-in micro-USB charging port making charging easier than ever! No more need for an extra charger as this battery can be charged directly using a standard micro-USB charging cable (sold separately). Simply plug the battery into an available power source and a red indicator light under the + pole will turn green upon completion. Alternatively, these batteries can still be charged on an external charger if desired. The NL1826R batteries are designed for powering high drain devices such as high-output flashlights, lanterns, headlamps, and bike lights, as well as a variety of other appliances and devices. With built in smart charging circuitry built and other integrated safety features through-out, this battery will safely work in the majority of button-top compatible devices.
Features & Specifications: Type: Nitecore NL1826R 18650 3.6V Protected Li-ion rechargeable battery Capacity: 2600mAh Voltage: 3.6V Output: 12.24Wh USB Charging Voltage: 5V USB Charging Current: 800mA (Maximum) Chemistry: Lithium-ion Weight: 1.52oz (47.3g) Length: 2.68in (68mm) Diameter: 0.72in (18.3mm) Protected: Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V Recharge: up to 500+ cycles Red & Green charging indicator LED's Microporous barrier and pressure release valves help protect the battery and prevent damage caused by rapid expansion & combustion 12 Month Warranty Period
Questa torcia è dotata di un pratico sistema di ricarica integrato tramite plug MicroUSB che permette di ricaricare batterie di tipo 18650 (1x 18650 da 3400mAh inclusa nella confezione)
Potenze e durate certificate da standard ANSI/NEMA FL1 testate con 1x 18650 3.6V da 3400mAh
LED: 1x Cree XM-L2 U2 con ciclo vitale di 50,000 ore Luce bianca principale: 5 output luminosi costanti, regolati digitalmente e selezionabili premendo l'apposito pulsante switch mode e 3 segnalazioni (police warning, S.O.S., location beacon) Potenze e durate: 1 lumen (680 h.) -> 38 lumens (25 h.) -> 210 lumens (7.15 h.) -> 420 lumens (2.30 h.) -> 1000 (1h.) Luce bianca ausiliaria: 26 lumens (25h.) Luce rossa ausiliaria: 11 Lumens (20h) -> Caution 11 Lumens (32h) Portata: fino a 110mt. Picco di potenza: 3000 candele Batterie utilizzabili: 1x 18650 3400mAh da 3.7V (inclusa nella confezione) o 2x CR123A da 3.0/3.7V usa e getta o ricaricabili Dimensioni torcia: 82.7x33.3 mm. Peso: 62.7g (senza batteria) Lente: in vetro indurito con trattamento anti riflesso Corpo: in alluminio aeronautico Finitura: anodizzata, Type III Cinghia: elastica, regolabile in diametro ed in altezza Note: resistente all'acqua come da standard IP68, immergibile a 2mt. di profondità per 30min. Accessori: 1x Batteria 18650 3.7V da 3400mAh - cavo di ricarica USB/MicroUSB - cinghia elastica frontale - o-ring di ricambio Sistema Integrato di Ricarica: attraverso la porta MicroUSB integrata - protetta da una copertura isolata - e utilizzando il cavo Micro-USB fornito di serie è possibile provvedere alla ricarica della batteria in dotazione, l'operazione è monitorabile grazie ad un apposito led luminoso posto accanto sotto i pulsanti di selezione luminosa. Il cavo di ricarica può essere attaccato a qualsiasi PC dotato di porta USB o a qualsiasi alimentatore da parete o da accendisigari dotato di porta USB.
Type of production: Industrial Production Lama USA Blade: Stainless steel CTS-204P Blade treatment: Black DLC Handle: Titanium with Black DLC and G-10 Orange Blade length: 90mm. Blade thickness: 4mm. Closed Length: 113mm. Overall length: 206mm. Thick when closed: 12mm. Weight: 160g. Lock: Frame Lock Clip: Removable, Multi position, stainless steel Packaging: cardboard box with Zero Tolerance logos Notes: Design by Rick Hinderer - Opening of ball bearings Ball Bearing System KVT - opening via Carson Flipper system
Type of production: Industrial Country of production: China Blade: 8Cr13MoV stainless steel Blade treatment: Satin and dual tone PVD Handle: Satin stainless steel and dual tone PVD Blade length: 8.3mm. Blade thickness: 2.7mm. Length closed: 108mm. Total length: 191mm. Thick when closed: 9.7mm. Weight: 133g. Opening: Carson Flipper system Washers: brass, with ball bearings Closure: Liner Lock Clip: stainless steel, removable and reversible Sheath: - Packaging: Cardboard box with Kershaw logos Notes: Design by Matt Diskin - TDS (Tuned Detent System) closed blade retention system
Type of production: Industrial Country of production: China Blade: 8Cr13MoV stainless steel Blade treatment: Black TiNi Handle: Black TiNi and G10 3D stainless steel Blade length: 8.3mm. Blade thickness: 2.7mm. Length closed: 111mm. Total length: 191mm. Thick when closed: 9.7mm. Weight: 131g. Opening: Carson Flipper and SpeedSafe system Washers: in brass Closure: Liner Lock Clip: stainless steel, removable and reversible Sheath: - Packaging: Cardboard box with Kershaw logos Note: -
Cavaturaccioli Francese Elegantissimo cavaturaccioli della nota azienda francese Laguiole. Ogni Laguiole é unico. È durante il processo di lavorazione del cavatappi che risiede la differenza tra la produzione industriale e la fabbricazione artigianale che è la sola che garantisce il fatto che ogni Laguiole è un'opera unica. Caratteristiche: 1/principali criteri di qualità di una fabbricazione artigianale locale. 2/il montaggio, l'assemblaggio, i completamenti. 3/il lavoro del legno prezioso. 4/le creazioni personalizzate.
Interamente realizzato a mano a pochi chilometri dal villaggio di Laguiole, Francia. Il "Laguiole en Aubrac ®" Luxury collection di cavatappi offre un design Laguiole contemporaneo combinato con funzionalità insuperabile e qualità di lavorazione. Tutti i cavatappi di lusso offerti da Laguiole en Aubrac sono interamente realizzati da un singolo artigiano dall'inizio alla fine per assicurare l'orgoglio di proprietà del pezzo finale.
Manicatura: Entrambe le parti Marqueterie (palissandro, Juniper Legno, Olive Wood, Wenge, e San Martin Wood con un sottile rivestimento Ebony.
Origine del Materiale: Francia, Sud America e Africa.
Peso: 116g
Dimensioni: 11,5 centimetri
Finitura: spazzolato 12C27 Sandvik in acciaio inox.
Le foto possono variare leggermente dal prodotto disponibile in quanto fatti artigianalmente.
Presitigioso Apri Ostriche Laguiole En Aublrac con manico in acciaio. Realizzazione artigianale
Lama: in acciaio 12C27 Stainless Steel Manicatura: acciaio inox. Lunghezza lama: 60 mm. Spessore della lama: 3 mm. Lunghezza totale: 180 mm. Confezionato in elegante scatola di legno.
I primi coltelli Laguiole avevano manici in corno e osso. Oggi in aggiunta ci sono molti altri materiali come div. tipi di legno. Un sommelier Laguiole en Aubrac è un investimento per la vita - prezioso e senza tempo.
Interamente realizzato a mano a pochi chilometri dal villaggio di Laguiole, Francia. Il "Laguiole en Aubrac ®" Luxury collection di cavatappi offre un design Laguiole contemporaneo combinato con funzionalità insuperabile e qualità di lavorazione. Tutti i cavatappi di lusso offerti da Laguiole en Aubrac sono interamente realizzati da un singolo artigiano dall'inizio alla fine per assicurare l'orgoglio di proprietà del pezzo finale.
Cavaturaccioli Francese Elegantissimo cavaturaccioli della nota azienda francese Laguiole. Ogni Laguiole é unico. È durante il processo di lavorazione del cavatappi che risiede la differenza tra la produzione industriale e la fabbricazione artigianale che è la sola che garantisce il fatto che ogni Laguiole è un'opera unica. Caratteristiche: 1/principali criteri di qualità di una fabbricazione artigianale locale. 2/il montaggio, l'assemblaggio, i completamenti. 3/il lavoro del legno prezioso. 4/le creazioni personalizzate.
Manicatura: Entrambe le parti in legno di ulivo
Peso: 116g
Dimensioni: 11,5 centimetri
Finitura: spazzolato 12C27 Sandvik in acciaio inox.
Confezione in scatola di legno chiara.
Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives. The deep finger choil protects fingers while applying pressure whittling, cutting or chopping. Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife. Features a polished stainless steel divot for use with a fire bow. This is a well-designed, great looking, and robust knife intended for serious work.
Intended use: Hunting / Sports
Type of production: Craft Lama production: USA Blade: CPM-S35VN 58 / 60HRC stainless steel Blade treatment: - Handle: micarta Blade length: 100mm. Blade thickness: 3.5mm. Length closed: - Total length: 225mm. Thickness when closed: - Balancing: 2 cm back Weight: 172g. Closure: - Clip: - Sheath: in leather Packaging: cardboard box with WRKT logos Notes: flask housed in a pocket of the sheath
Article on reservation - available from December 15, 2017
Intended use: heavy duty / hiking / tactical / collection Type of production: hand-made blade and handle - industrial titanium folders Country of production: Italy Blade: D2 steel at 59 / 61HRC with cryogenic hardening Blade Treatment: Raw Handle: titanium folding handles with micarta handle Blade Length: 90mm. Blade thickness: 5mm. Closed length: 120mm. Total length: 210mm. Weight: 150g. Opening: Carson Flipper system / bobbin opening pins on the blade Washers: Steel, with ball bearings made in Japan Closure: Rockers Arm 8.11 Clip: Stainless steel removable and reversible Packing: Plastic case with Wander Tactical logos
Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives. The deep finger choil protects fingers while applying pressure whittling, cutting or chopping. Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife. Features a polished stainless steel divot for use with a fire bow. This is a well-designed, great looking, and robust knife intended for serious work.
Blade Length: 5”
Overall Length: 10”
Blade Steel: CPM S30V
Hardness: 59 HRC
Sheath: Leather
White River Guarantee: If you are not 100% satisfied with this knife, send it back for free repair or replacement.
Designed for intensive use in real-life situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / Sports
Type of production: Craft Lama production: USA Blade: CPM-S30VN 58 / 60HRC stainless steel Blade treatment: - Handle: micarta Blade length: 175 Blade thickness: 5mm. Length closed: - Total length: 295mm. Thickness when closed: - Balancing: 0.5 cm advanced Weight: 320g. Closure: - Clip: - Sheath: in leather Packaging: cardboard box with WRKT logos Notes: flask housed in a pocket of the sheath
Article on reservation - available from December 15, 2017
Intended use: heavy duty / hiking / tactical / collection Type of production: hand-made blade and handle - industrial titanium folders Country of production: Italy Blade: D2 steel at 59 / 61HRC with cryogenic hardening Blade Treatment: Raw Handle: titanium folding handles with micarta handle Blade Length: 109mm. Blade thickness: 5mm. Closed length: 145mm. Total length: 250mm. Weight: 150g. Opening: Carson Flipper system / bobbin opening pins on the blade Washers: Steel, with ball bearings made in Japan Closure: Rockers Arm 8.11 Clip: Stainless steel removable and reversible Packing: Plastic case with Wander Tactical logos
Article on reservation - available from December 15, 2017
Intended use: heavy duty / hiking / tactical / collection Type of production: hand-made blade and handle - industrial titanium folders Country of production: Italy Blade: D2 steel at 59 / 61HRC with cryogenic hardening Blade Treatment: Raw Handle: titanium folding handles with micarta handle Blade Length: 90mm. Blade thickness: 5mm. Closed length: 120mm. Total length: 210mm. Weight: 150g. Opening: Carson Flipper system / bobbin opening pins on the blade Washers: Steel, with ball bearings made in Japan Closure: Rockers Arm 8.11 Clip: Stainless steel removable and reversible Packing: Plastic case with Wander Tactical logos
