bing

Dicembre 2019

Set Ascending Direction

Items 1-72 of 113

Page
  1. Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION

    KNIFE RETIRED FROM PRIVATE COLLECTION
    * Type: Previously purchased
    * Condition: Overall in very good condition
    * Available: on the market
    * Sharpness: Factory
    * Marks on blade: none
    * Marks on handle: None
    * Box: -
    * Sheath: synthetic material case
    * Manuals, Certificates and Guarantees: guarantee certificate
    * Checked and Certified by our internal laboratory

    Intended use: Regional

    Type of production: Artisan
    Blade production: Italy
    Blade: 12c26 stainless steel
    Blade Treatment: -
    Handle: ram's horn
    Blade length: 110mm.
    Blade thickness: 3mm.
    Closed length: 147mm.
    Total length: 265mm.
    Closed thickness: 19mm
    Balancing: -
    Weight: 100g.
    Closure: without blade lock
    Clips: -
    Sheath: -
    Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
    Note: -

    AP-DR-RES-12
    €307.38
    Only 1 left
    Only 1 left
  2. Nitecore - KIT Torch MH25 Pro + Remote RSW1 Pro - USB Rechargeable - 3300 Lumens and 705 Meters - LED Flashlight

    MH25 PRO flashlight + RSW1 PRO remote switch kit

    TECHNICAL SPECIFICATIONS:

    Led: 1x UHi 40 LED with a life cycle of 50,000 hours
    Operating Modes: 5 light modes and 3 special modes, all electronically regulated
    Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
    Peak power: 124300 candles
    Maximum lighting distance: 705m.
    Lighting Method: Rear Button with "Momentary On" system for light signals
    Light selection method: Front button located under the head
    Head: aircraft aluminum
    Body: aircraft aluminum
    Finish: anodized, Type III
    Lens: ultra-clear hardened glass with anti-reflective treatment
    Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
    Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
    Weight: 130g. without batteries
    Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable, 
    Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
    Impact resistance: withstands falls from 1m height

    Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

    NI-MH25PRO+RSW1
    €114.75
    Only 10 left
    Only 10 left
  3. Benchmade - Bailout Knife Crater Blue Aluminum - CPM-M4 - Plain Tanto - 537FE-02 - knife

    When you find yourself facing long distances, you need a knife that can do the same. Inspired and designed for tactical situations, the Bailout® pushes the concept of lightweight to the maximum. It boasts an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile, this slim pocket tool achieves an optimal balance between strength and weight, making it suitable for both heavy-duty use and daily carry. The novelty for 2023 is the eye-catching combination of the Crater Blue handle and the Flat Dark Earth blade, creating a striking contrast.

    Intended Use: Tactical / EDC

    Production Type: Industrial
    Country of Production: USA
    Blade: CPM-M4 steel (62-64 HRC)
    Blade Finish: Cerakote®
    Handle: Crater Blue anodized 6061-T6 aluminum
    Blade Length: 86mm.
    Blade Thickness: 2.3mm.
    Closed Length: 119mm.
    Overall Length: 205mm.
    Closed Thickness: 10.4mm
    Weight: 70g.
    Locking Mechanism: AxisLock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos
    Notes: -

    BM-537FE-02
    €245.90
    Only 2 left
    Only 2 left
  4. Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Serrated Tanto - 537SGY-03 - knife

    When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

    Intended Use: Tactical / EDC

    Production Type: Industrial
    Country of Production: USA
    Blade: CPM-M4 steel (62-64 HRC)
    Blade Finish: Cerakote®
    Handle: Black anodized 6061-T6 aluminum
    Blade Length: 86mm.
    Blade Thickness: 2.3mm.
    Closed Length: 119mm.
    Overall Length: 205mm.
    Closed Thickness: 10.4mm
    Weight: 70g.
    Locking Mechanism: AxisLock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos
    Notes: -

    BM-537SGY-03
    €245.90
    Only 1 left
    Only 1 left
  5. Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Plain Tanto - 537GY-03 - knife

    When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

    Intended Use: Tactical / EDC

    Production Type: Industrial
    Country of Production: USA
    Blade: CPM-M4 steel (62-64 HRC)
    Blade Finish: Cerakote®
    Handle: Black anodized 6061-T6 aluminum
    Blade Length: 86mm.
    Blade Thickness: 2.3mm.
    Closed Length: 119mm.
    Overall Length: 205mm.
    Closed Thickness: 10.4mm
    Weight: 70g.
    Locking Mechanism: AxisLock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos
    Notes: -

    BM-537GY-03
    €245.90
    Only 2 left
    Only 2 left
  6. Nordic Ware - Maple Leaf 6 Cavity Baking Pan

    Nordic Ware - Maple Leaf Pan

    With fall coming up, it’s time to start looking at products that have a seasonal edge to them, like this Maple Leaf Pan. The pan bakes muffin-sized cakes in the shape of maple leaves – perfect for just about any fall or holiday gathering, especially if the leaves are falling off the trees outside. The pan is made by NordicWare and is made of cast aluminum, with a nonstick finish on the interior. Even with the nonstick finish, it is a good idea to grease this pan well before using it to ensure that all the crinkled edges of the leaves, as well as the detailed veins on the bottom of each leaf, come out of the pan cleanly. It’s not that easy to get a knife underneath these cakes if they do stick, but a thin knife can be used to loosen the edges and they really should come out without too much difficulty.

    Features: 

    Inner material: cast aluminium 

    Outer material: special non-stick coating 

    Dimensions: 25 x 25 x 3.50 cm 

    Capacity: 6 1/4 cup cavities 

    Lifetime Warranty 

    Made in the USA

    NW56537
    €40.90
    Only 1 left
    Only 1 left
  7. Nitecore - MH15 - USB Rechargeable - 2000 lumens and 250 meters - Powerbank and Led Torch

    TECHNICAL SPECIFICATIONS:

    Led: 1x Luminus SST40 with a life cycle of 50,000 hours
    Operating Modes: 4 light modes and 2 special modes, all electronically regulated
    Powers and Durations: 2000 Lumens (45min.) -> 350 Lumens (6.30h) -> 50 Lumens (24h) -> 5 Lumens (200h) -> Beacon -> S.O.S.
    Peak power: 15850 candles
    Maximum lighting distance: 250m.
    Lighting Method: Rear Button
    Lighting selection method: Rear Button
    Head: aircraft aluminum
    Body: Plastic Material
    Finish: Anodized, Type III
    Lens: Polymeric
    Batteries: (built-in, not removable): 1x 21700 3.6V 5000mAh
    Measurements: 11.7cm (L) - 3.0cm (D shaft) - 3.0cm (D head) - 2.74cm (D tang)
    Weight: 140g.
    Accessories: USB-C to USB-C charging cable, wrist strap
    Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
    Impact resistance: withstands falls from 1m height

    Actual power and durability, lab-certified by ANSI/PLATO FL1-2019 standard

    NI-MH15
    €59.02
    Only 2 left
    Only 2 left
  8. Nitecore - MH25 Pro - USB Rechargeable - 3300 Lumens and 705 Meters - Led Flashlight

    TECHNICAL SPECIFICATIONS:

    Led: 1x UHi 40 LED with a life cycle of 50,000 hours
    Operating Modes: 5 light modes and 3 special modes, all electronically regulated
    Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
    Peak power: 124300 candles
    Maximum lighting distance: 705m.
    Lighting Method: Rear Button with "Momentary On" system for light signals
    Light selection method: Front button located under the head
    Head: aircraft aluminum
    Body: aircraft aluminum
    Finish: anodized, Type III
    Lens: ultra-clear hardened glass with anti-reflective treatment
    Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
    Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
    Weight: 130g. without batteries
    Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable, 
    Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
    Impact resistance: withstands falls from 1m height

    Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

    NI-MH25PRO
    €98.36
    Only 3 left
    Only 3 left
    Rating:
    93%
    4.7
  9. Nitecore - MH12 PRO - USB Rechargeable - 3300 lumens and 505 meters - LED Flashlight

    NITECORE has launched the MH12 Pro, an ultra long-range electric torch with a maximum power of 3,300 lumens. This marks the first electric torch by NITECORE equipped with the LED NiteLab UHi 40 - the newly developed LED with a round light emitting surface (LES), ultra high light intensity and a maximum power of 40W.

    Compact yet powerful, the MH12 Pro surpasses medium-sized electric torches (40mm head) not only in terms of power, but also beam distance. Thanks to the cutting-edge LED UHi 40, it can provide a remarkable power of 3,300 lumens, and offers a maximum peak beam intensity of 63,500cd and a maximum range of 505 meters, ideal for emergencies, night searches, outdoor activities, maintenance checks, and more. The round LES of the LED UHi 40 matches perfectly with the round reflector, allowing high light conversion efficiency and a bright and clear hotspot, which helps to quickly and accurately identify targets at night.

    The body of the MH12 Pro is made with precision CNC machining and features a non-slip knurling. With a 1mm thick texture, users can maintain a secure grip even with sweaty, wet hands, or when wearing gloves. Moreover, on the front of the torch, there are 4 power indicators and 4 level indicators, which allow intuitive control of the torch status. The U-shaped tail cap is available to prevent accidental activations and offers the possibility of tail standing, along with a hole for lanyard attachment.

    The MH12 Pro includes a NITECORE Li-ion battery NL2153HP 21700 with a huge capacity of 5,300mAh and a continuous discharge current of 20A, powering the light for a total of 650 hours at ULTRALOW level. A USB-C charging port with a reversible plug-in is available for direct charging.
    The MH12 Pro also has a sensor protection function. When the integrated optical sensor detects an obstacle at a short distance, the brightness of the torch will automatically decrease to prevent overheating. The Daily Mode and Tactical Mode are available for different uses. In addition to a highly efficient constant current circuit (non-PWM), it is also rated IP68 (immersion up to 2m) with a 1 meter impact resistance.


    TECHNICAL SPECIFICATIONS:
    Led: 1x Luminus UHi 40 with a life cycle of 50,000 hours
    Operational Modes: 5 light modes and 3 special modes, all electronically regulated
    Powers and Durations: 3300 Lumens (0.30h) -> 1200 Lumens (4.30h) -> 300 Lumens (8.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
    Peak power: 63500 candles
    Maximum illumination distance: 505m.
    Ignition Method: Rear Button with "Momentary On" system for light signals
    Light selection method: Front button located under the head
    Head: aeronautical aluminum
    Body: aeronautical aluminum
    Finish: anodized, Type III
    Lens: ultra clear hardened glass with anti-reflective treatment
    Batteries: (included): 1x 21700 3.6V NL2153HP 5,300mAh - also compatible with 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via adapter, sold separately)
    Measurements: 13.8cm (L) - 2.6cm (D barrel) - 2.68cm (D head) - 2.7cm (D tail)
    Weight: 81.5g. without batteries
    Accessories: Rechargeable Li-ion battery NITECORE 21700 (NL2153HP 5,300mAh), USB-C charging cable, Clip, Wrist strap, Replacement O-ring, Nylon sheath
    Waterproof: as per IP68 standard, submersible up to 2m. deep for 30min.
    Impact resistance: resistant to falls from 1m height
    Real powers and durations, certified in the laboratory by ANSI/PLATO FL1-2019 standards

    NI-MH12PRO
    €86.07
    Only 12 left
    Only 12 left
    Rating:
    100%
    5
  10. Benchmade - Bailout Knife - CPM-M4 - Tanto - Titanium Handle - Limited Edition - 537BK-2302 - knife

    A perfect combination in the EDC paradise. The Bailout® holds a special place in the hearts of those who appreciate tactical toughness in their everyday carry, and now we're pairing this sleek and ultralight folding knife with the ultimate super-material: titanium.

    The all-new limited edition 537BK-2302 Bailout® features the much-loved CPM-M4 tanto blade, now in cobalt black Cerakote, but the star of this show is its handle made of bead-blasted 6Al-4V titanium manufactured in the USA.

    Accentuated with PVD-coated blue hardware, including a Crater Blue lanyard pommel, this edition is limited to 1000 pieces.

    Intended Use: Tactical / EDC

    Production Type: Industrial
    Country of Origin: USA
    Blade: CPM-M4 steel (62-64 HRC)
    Blade Finish: Cobalt Black Cerakote
    Handle: 6AI-4V Titanium
    Blade Length: 86mm.
    Blade Thickness: 2.3mm.
    Closed Length: 119mm.
    Overall Length: 205mm.
    Closed Thickness: 9.7mm
    Weight: 103g.
    Locking Mechanism: AxisLock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos
    Notes: Limited edition of 1000 pieces

    BM-537BK-2302
    €491.80
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  11. Fox - Saturn by D. Simonutti - Acid Stonewashed Aluminum - FX-551ALG - knife

    Intended Use: Sporting / Collection

    Type of production: Industrial
    Country of Production: Italy
    Blade: stainless steel N690Co 58/60HRC
    Blade treatment: Acid Stonewashed
    Handle: Anodized Aluminum
    Blade Length: 60mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 160mm.
    Weight: 130g.
    Closure: Fingers Safe Opening System
    Clip: Aluminum machined from billet
    Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
    Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"

    FX-551ALG
    Special Price €151.64 Regular Price €168.03
    Only 1 left
    Only 1 left
  12. Fox - Saturn by D. Simonutti - Black Aluminum - FX-551ALB - knife

    Intended Use: Sporting / Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: Stainless steel N690Co 58/60HRC
    Blade treatment: Idroglider Blackwashed
    Handle: Anodized aluminum
    Blade length: 60mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 160mm.
    Weight: 130g.
    Closure: Fingers Safe Opening System
    Clip: Aluminum machined from billet
    Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
    Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"

    FX-551ALB
    Special Price €154.92 Regular Price €171.31
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  13. Fox - Saturn by D. Simonutti - Satin Titanium - FX-551Ti - knife

    Intended Use: Sporting / Collection

    Production type: Industrial
    Country of Production: Italy
    Blade: Stainless steel M390 58/60HRC
    Blade treatment: Satin finish
    Handle: Titanium with PVD Blacwashed treatment
    Blade length: 60mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 160mm.
    Weight: 130g.
    Closure: Fingers Safe Opening System
    Clip: Titanium machined from solid
    Packaging: box with Fox Knives logos, warranty certificate
    Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"

    FX-551Ti
    Special Price €274.59 Regular Price €323.77
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  14. Kershaw - Highball XL KVT Knife - 7020 - D2 steel - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: D2 steel
    Blade treatment: Stonewashed
    Handle: Stainless steel with Stonewashed and G10 finish
    Blade length: 84mm.
    Blade thickness: 3mm.
    Closed length: 110mm.
    Total length: 190mm.
    Weight: 108g.
    Opening: KVT Bearings system
    Washers: in reversible steel
    Closure: Frame Lock
    Clip: in stainless steel, removable and reversible
    Packaging: Cardboard box with Kershaw logos
    Note: -

    K7020
    €73.77
    Only 1 left
    Only 1 left
  15. Sanelli Premana - Paring Knife 8cm - 3336.08 - Kitchen Knife

    The 8cm 3336.08 Spelucchino knife from Sanelli Premana is a small kitchen knife, ideal for precision kitchen tasks such as peeling and cutting fruits and vegetables.

    The 8-cm blade is made of high-quality X60CrMov14 stainless steel with a hardness of 54-56 HRC, which ensures a long edge life. The blade has a sharp edge designed to cut cleanly and precisely.

    The ergonomic polypropylene handle, a durable, non-slip material, provides a firm and comfortable grip during use.

    Sanelli Premana is an Italian company specializing in the production of high-quality kitchen knives used in both professional and domestic settings. Their products are known for their reliability, durability and precision, and are highly valued by restaurant professionals worldwide.

    Recommended Use: vegetable paring knife, utility knife

    Country of manufacture: Italy

    Blade: made of surgical stainless steel with a hardness of 54-56 HRC

    Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

    Blade length: 80mm.

    Total length: 185mm.

    Packaging: cardboard blade cover with Sanelli logos

    Weight: 33g.

    s333608
    €9.84
    Only 6 left
    Only 6 left
  16. Benchmade - Bailout Knife - CPM-M4 - Plain Tanto - 537GY-1 - knife

    Intended use: Tactical / EDC

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-M4 steel (62-64 HRC)
    Blade finish: Gray Coated
    Handle: Woodland Green anodized 6061-T6 aluminum
    Blade length: 86mm.
    Blade thickness: 2.3mm.
    Length closed: 119mm.
    Total length: 205mm.
    Thick when closed: 10.4mm
    Weight: 70g.
    Closing system: AxisLock
    Clip: Removable and reversible, in stainless steel
    Packaging: Cardboard box with Benchmade logos
    Note: -

     -

    BM-537GY-1
    €245.90
    Only 2 left
    Only 2 left
  17. Alter-Eno - Educational table support for wine

    Alter-Eno - Educational table support for cwine Desk teaching support A practical and simple tool to identify the aromas of wine. The wheel turns on itself pushed with a light pressure of the finger, while the arrow indicates the point of interruption of the reading ... in order not to strain the sight and to distract the attention. For the company Alter-Eno it is necessary that in addition to the dimensions relative to the contents, the dimensions of methodological-didactic order, that is to say of the methods to reach knowledge, are always kept in mind. Measures 15x20x3 cm
    3367V
    €32.79
    Only 1 left
    Only 1 left
  18. Kershaw - Oblivion SpeedSafe Frame Flipper - 3860 - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: 8Cr13MoV stainless steel
    Blade treatment: Stonewashed
    Handle: Stainless steel with Stonewashed and G10 finish
    Blade length: 90mm.
    Blade thickness: 3mm.
    Length closed: 118mm.
    Total length: 206mm.
    Thick when closed: 10.2mm.
    Weight: 146g.
    Opening: Carson Flipper system and SpeedSafe Assisted Opening
    Washers: steel,
    Closure: Frame Lock
    Clip: stainless steel, removable and reversible
    Packaging: Cardboard box with Kershaw logos
    Note: -

    K3860
    €36.89
    Only 3 left
    Only 3 left
  19. Kershaw - Innuendo Frame by Les George - 3440 - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: 8Cr13MoV stainless steel
    Blade treatment: Gray TiNi
    Handle: Stainless steel with bead-blasted finish
    Blade length: 85mm.
    Blade thickness: 3mm.
    Length closed: 108mm.
    Total length: 191mm.
    Thick when closed: 10mm.
    Weight: 127g.
    Opening: through ambidextrous opening disc placed on the blade
    Washers: in Teflon
    Closure: Frame Lock
    Clip: stainless steel, removable and reversible, with Gray TiNi treatment
    Packaging: Cardboard box with Kershaw logos
    Notes: Design by Les George

    K3440
    €40.98
    Only 3 left
    Only 3 left
  20. Kershaw - Decibel Frame Knife - 2045 - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: 8Cr13MoV stainless steel
    Blade treatment: Matte Gray TiNi
    Handle: Stainless steel with Matte Gray TiNi finish
    Blade length: 74mm.
    Blade thickness: 2.5mm.
    Length closed: 94mm.
    Total length: 178mm.
    Thick when closed: 15mm.
    Weight: 83g.
    Opening: through ambidextrous opening pin placed on the blade
    Washers: in Teflon
    Closure: Frame Lock
    Clip: stainless steel, removable and reversible, with PVD treatment
    Packaging: Cardboard box with Kershaw logos
    Note: -

    K2045
    €53.28
    Only 2 left
    Only 2 left
  21. Kershaw - Parsec Frame Flipper - 2035 - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: 8Cr13MoV stainless steel
    Blade treatment: Stonewashed Brown PVD
    Handle: Stainless steel with Stonewashed Brown PVD finish
    Blade length: 7.6mm.
    Blade thickness: 3mm.
    Length closed: 105mm.
    Total length: 182mm.
    Thick when closed: 10.2mm.
    Weight: 99g.
    Opening: Carson Flipper system
    Washers: in steel, with ball bearings
    Closure: Frame Lock
    Clip: stainless steel, removable and reversible, with PVD treatment
    Packaging: Cardboard box with Kershaw logos
    Note: -

    K2035
    €53.28
    Only 1 left
    Only 1 left
  22. Fox - Radius by Denis Simonucci - Black PVD Titanium - FX-550TIB - knife

    Intended use: Sports / Collection

    Type of production: Industrial
    Country of production: Italy
    Blade: M390 58 / 60HRC stainless steel
    Blade treatment: Black PVD
    Handle: Titanium with Black PVD treatment
    Blade length: 75mm.
    Blade thickness: 4mm.
    Length closed: 110mm.
    Total length: 185mm.
    Weight: 140g.
    Closing: Fingers Safe Opening System
    Clip: Titanium machined from solid
    Packaging: box with Fox Knives logos, pouch with zip
    Notes: Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"

    FX-550TIB
    Special Price €370.49 Regular Price €412.30
    Only 99 left
    Only 99 left
  23. Alpen - Mustache Set 6893R

    Alpen - Mustache Set 6893R Manicure set consisting of 3 elements in an elegant black leather case.Manicure set composed of 3 elements in an elegant black leather worked case.

    Included in the set:

    - CASE in black leather,

    - COMB / BRUSH FOR STONES OR BEARDS in mixed synthetic yew with black plastic finish, to always have your beard in order!

    - SCISSORS FOR BEADS OR BEARDS

    Total length: 11cm Stainless steel.

    - STAINLESS STEEL NAIL CLIPPERS TRIM.

    6893R
    €61.48
    Only 2 left
    Only 2 left
  24. Due Cigni - Chopsticks, 1 Pair of Titanium Chopsticks

    Due Cigni - Chopsticks, 1 Pair of Titanium Chopsticks

    REUSABLE & DISHWASHER SAFE: These Color Chopsticks are Corrosion & High Temperature Resistant, they are dishwasher safe and reusable chopsticks. These Chopstick set are not toxic. There are no after taste on the chopsticks and they are also non-allergenic, odorless & flavorless. Due Cigni Chopsticks sets are much better than any metal chopsticks or stainless steel chopsticks. These are also 100% FDA Food Grade Chopsticks Titanium (Ti)

    LIGHTWEIGHT & SUPER STRONG:Titanium chopstick are very sturdy & lightweight (nearly feather-light) and easy to handle. They are 100% Titanium, you can use them to eat Noodles, Sushi or Rice.. These are rounded colored chopsticks

    COLOR CHOPSTICKS FOR HOME, TRAVEL & CAMPING: The Pair of color chop sticks comes in a Leather Case Made in Italy which makes it easy to carry during Travel & Camping or Picnic. You can use them at home or carry them to work, school, college or to any Chinese or Japanese Restaurant. The chopstick case keep them safe and away from dust and contamination. They work perfectly as travel chopsticks reusable and can be used for takeaway food. The quality Chopsticks are available in Blua and Brown color

    REDUCE CARBON FOOTPRINT: These camping chopsticks are made of Titanium, they are reusable and last really very long. You don't need to buy another one for years. Titanium are as light but Stronger & superior to Steel. They are resistant to Acid, Alkali & Never Rust even if you place them in deep sea. You won't find a dishwasher safe chopsticks stronger than the one made out of Titanium. Let's reduce some carbon footprint by buying the stronger Due Cigni Chopstick titanium which lasts ages.

    2C1200B
    €77.05
    Only 2 left
    Only 2 left
  25. Lionsteel - THRILL - SlipJoint Aluminum Black - TLABS - knife

    Intended use: EDC / Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: Stainless steel M390 59 / 60HRC
    Blade treatment: Satin finish
    Handle: billet aluminum
    Blade length: 80mm.
    Blade thickness: 3.5mm.
    Total length: 180mm.
    Thick when closed: 18mm.
    Weight: 62g.
    Closure: SlipJoint with steel leaf
    Clip: retractable, made from solid
    Packaging: cardboard box with LionSteel logos
    Note: -

    LS-TLABS
    €137.70
    Only 1 left
    Only 1 left
  26. Nitecore - TIKI LE - Rechargeable USB + Red / Blue Keychain - 300 lumens and 71 meters - Led Flashlight

    Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x Red LED + 1x Blue LED
    Operating Modes: 4 light powers, selectable with the specific dedicated button + Red Light + Blue Light + Flashing Red / Blue
    Power and Durability: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> Red Light -> Blue Light -> Red / Blue Flashing
    Peak power: 1260 candles
    Maximum illumination distance: 71m.
    Ignition method and light selection: Front button
    Materials: aeronautical aluminum head, ABS body
    Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
    Measurements: 5.5cm (Length) - 1.47cm (Diameter)
    Weight: 12g. - battery included
    Accessories: steel ring for attaching to the key ring
    Waterproof: as per IP66 standard, it resists dust, water and light dives
    Impact resistance: withstands falls from 1m in height
    Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional red light - Additional blue light

    Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

    NI-TIKI-LE
    €20.49
    Only 3 left
    Only 3 left
    Rating:
    91%
    4.6
  27. Nitecore - TIKI - USB + UV Rechargeable Keychain - 300 lumens and 71 meters - Led Flashlight

    Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x UV Led + 1x HI CRI led
    Operating Modes: 4 light powers, selectable with the specific dedicated button + UV + white Flood Light + Warning Flash
    Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> UV -> Flood Light -> Warning Flash
    Peak power: 1260 candles
    Maximum illumination distance: 71m.
    Ignition method and light selection: Front button
    Materials: aeronautical aluminum head, ABS body
    Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
    Measurements: 5.5cm (Length) - 1.47cm (Diameter)
    Weight: 12g. - battery included
    Accessories: steel ring for attaching to the key ring
    Waterproof: as per IP66 standard, it resists dust, water and light dives
    Impact resistance: withstands falls from 1m. of height
    Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional 500mW and 365nm UV light - Additional "warm" white light HI CRI

    Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

    NI-TIKI
    €20.49
    Only 5 left
    Only 5 left
    Rating:
    94%
    4.7
  28. Fantastic Animals and Where to Find Them - Albus Dumbledore Magic Wand - Collector Box NN9906

    An authentic reproduction of Albus Dumbledore's Magic Wand used in the movie "Fantastic Beasts Wands"

    It is made of resin and has a length of 36 cm.
    Comes with a cardboard box and Olivander velvet.

    It is an officially licensed product Warner Bros Entertainment Inc.


    Fantastic Beasts (Fantastic Beasts) is a fantasy film series directed by David Yates, written by JK Rowling and produced by Warner Bros. Started in 2016 with Fantastic Animals and where to find them and continued in 2018 with Fantastic Animals - Grindelwald Crimes, will be composed from five films [1].
    It is a spin-off of Harry Potter inspired by the depth manual Fantastic Beasts and Where to Find Them, both written by Rowling. The series is set in the Magic World, a universe shared with Harry Potter, but some sixty years earlier in the internal chronology, in a period of time ranging from 1926 to 1945. The plot follows the magizoologist Newt Scamander in his adventures around for the world in search of magical creatures and in his efforts to thwart the dark wizard Gellert Grindelwald.

    NN9906
    €30.33
    Only 1 left
    Only 1 left
  29. Moser - Li+Pro 2 - 1888-0051 - Professional cordless hair clipper

    Professional cordless hair clipper, with Li-ion battery, 100% Made in Germany, 2 year Italian warranty

    DIAMOND BLADE CUTTING HEAD
    Cutting width 45mm; Cutting height from 0.7 to 3mm. Innovative carbon coating for optimized cutting performance, 40 times stronger than standard Moser heads. Entirely stainless and washable.

    QUICK CHANGE SYSTEM
    Easy-to-remove head for easy cleaning and quick change to a new head or a second optional All-in-one head.

    PROFESSIONAL
    Cordless or fixed network cable operation. Extremely efficient and long-lasting lithium-ion batteries, without memory effect, with quick recharge in 80 minutes and autonomy up to 160 continuous minutes.

    INTELLIGENT
    You will always have all the most important information under control via the LCD display included on the machine body. Battery indicator, set speed level, always clearly visible cleaning and lubrication indications.

    CUTTING PERFORMANCES
    3 speed levels, suitable for every need.

    CONSTANT POWER
    Electronic motor equipped with microcontroller, to guarantee a constant cutting power.

    ERGONOMIC
    Extremely light and silent. Only 270 g. Particularly comfortable and ergonomic seamless body.

    ACCESSORIES INCLUDED
    6 plastic risers with heights of 3/6/9/12/18 / 25mm; charging base with cable collection compartment; plug transformer with low energy consumption; cleaning brush; oil for cutting head maintenance.

    MAINTENANCE
    We recommend constant lubrication using the oil supplied inside the package to be applied on the legs after each use.

    OUR EXPERIENCE
    Excellent for private and professional use - Pre-shipment check guaranteed by our internal assistance and regrinding laboratory.

    1888-0051
    Special Price €172.13 Regular Price €196.72
    Only 4 left
    Only 4 left
    Rating:
    100%
    5
  30. Nordic Ware - Frozen 2 Character Mold Cakelet

    Nordic Ware Frozen 2 Character Mold Cakelet by: Nordicware

    This cast aluminum pan from Nordic Ware features individual cakelets with remarkably crisp detail of Elsa, Anna, Olaf and Sven in Frozen 2 theming. Creates intricate, 3-dimensional, personal-sized cakelets. No decoration required, but if you desire, a simple coat of glaze or dusting of powdered sugar highlights the baked-in beauty of each shape. Gold exterior finish with premium nonstick interior coating. For use with dense pound cake or quickbread style recipes or mixes.

    Units: 1 Dimensions: 2½" wide x 5" long x 1⅛" deep Made of heavy cast aluminum which provides superior baking performance.

    Baked goods rise evenly, and cook uniformly thanks to the excellent conduction of the heavy walls. A special heat relfective exterior and premium nonstick surface assures perfect results.

    Pan is wonderful for breads and cake, as well as molded cookies.

    Pan has 4 cavities: Anna, Elsa, Olaf, and Sven.

    Total batter capacity of 2.5 cups.

    NW94378
    €55.66
    Only 1 left
    Only 1 left
  31. Birkmann - Half round loaf pan, 30 cm - Premium Baking

    Birkmann - Half round loaf pan, 30 cm - Premium Baking

    A bakery classic!

    With excellent brand-name non-stick coating from Whitford, and exceptionally thick material for especially uniform heat conductivity.; in high-quality gift packaging, with recipe booklet

    Features 30 cm | Height 5 cm | approx. 1000 ml

    6276B
    €26.23
    Only 3 left
    Only 3 left
  32. Nordic Ware - Frozen Snowflakes - Cakelet Pan

    Nordic Ware - Frozen Snowflakes - Cakelet Pan Hey, snowflake! This frozen snowflake cakelet pan by Nordic Ware makes fanciful cakes kids and kids-at-heart will love. Nonstick-coated cast aluminum ensures the cakes showcase every geometric detail. From Nordic Ware. Six 1/2-cup snowflake designs Nonstick coating Cast aluminum construction Measures approximately 12"L x 7-1/2"W x 1-3/8"H Hand wash Lifetime Limited Manufacturer's Warranty These lovely little snowflake cake lets will add sparkle to any winter gathering! Each snowflake design is unique for an adorable winter treat.
    NW89642
    €55.66
    Only 2 left
    Only 2 left
  33. Harry Potter - Magic Wands Dark Wizard Wand Collection NN7351

    The set includes a wall display in the shape of the Black Mark and 5 sticks, the baton of Voldemort and the 4 of the Death Eaters:
    The display measures 43 cm high and 16.5 cm wide. The sticks measure about 38 cm in length.

    It is an officially licensed product Warner Bros Entertainment Inc.

    NN7351
    €147.54
    Only 2 left
    Only 2 left
  34. Zassenhaus - Fruit / vegetable bag size M, set of 3

    Zassenhaus - Fruit / vegetable bag size M, set of 3:

    1 x 29,0 x 29,0 cm

    1 x 33,0 x 30,0 cm

    1 x 36,5 x 38,0 cm

    environmentally friendly, sustainable, reusable

    lockable with drawstring loadable up to 10 kg thanks to solid processing

    including weight indication (TARA)

    ideal for shopping fresh, unpacked food

    100% untreated cotton

    Care: Wash at 30 ° C, not suitable for tumble dryers

    054620
    Special Price €9.63 Regular Price €11.07
    Only 5 left
    Only 5 left
  35. Scanpan - TO GO thermo bottle 0,5 l

    Stay hot, keep cool

    The new TO GO BY SCANPAN thermo bottles have been created with fashion, functionality, and sustainability in mind. The thermo bottles are reusable and the perfect companion in an active lifestyle whether it’s a trip to the gym or just on the go. The bottles match for any occasion.

    Easy to carry

    EASY

    A good thermo bottle is an important part of your active lifestyle. Convienent for sport, on a trip, on holiday, in school, at work.

    Trendy lifestyle

    TRENDY

    Your most precious fashion accessory – choose the colour matching your outfit of the day.

    Sustainability

    GREEN

    Join the movement for global sustainability. By using the TO GO bottle again and again instead of disposable plastic bottles you help save our planet a huge amount of waste.

    TO GO thermo bottles

    500 ml

    Keeps your drink cold for up to 24 hours

    Coffee and tea will stay hot for up to 12 hours

    Made of stainless steel

    Scratch-free powder coating

    Vacuum sealed and leak-free

    Does not condensate BPA free.

    54110
    €18.44
    Only 44 left
    Only 44 left
  36. Sigg - Kids Water Bottle VIVA ONE Olaf 0.5l - FROZEN

    Kids Bottle VIVA ONE Olaf 0.5l

    Olaf, the funny snowman from Disney's "The Frozen", is now a great companion through the day. And not only with ice and snow - his glowing carrot nose and his infectious laugh make just always good mood! The high-quality, reusable VIVA water bottle in the "Frozen" design is made of transparent polypropylene, so you always see how much (or little) you have already drunk. All materials are 100% recyclable and free of harmful substances, such as estrogen-active substances and phthalates - for a safe drinking pleasure. The innovative ONE closure makes the bottle even more comfortable: carry, open, drink, close and secure work comfortably with one hand.

    Dimensions

    Height: Ø Weight 21.2 cm 7.3 cm 128 gr.

    4778OLAF2
    Special Price €12.39 Regular Price €15.49
    Only 1 left
    Only 1 left
  37. Sigg - Kids Water Bottle Olaf 2 0.6l - FROZEN

    Sigg - Kids Water Bottle Olaf 2 0.6l Olaf, the amusing snowman from Disney’s “Frozen”, can now be a great companion throughout the day. And not only when it’s cold outside – his glowing carrot nose and contagious smile simply never fail to lift the spirits! The high-quality, recyclable aluminum drinking bottle in the “Olaf” design is extremely easy to transport and is equally suited to both school and leisure activities. The material is free from harmful chemicals, such as estrogen-mimicking substances and phthalates – for safer drinking enjoyment. The spill-proof child cap also ensures easy transport, even when the little ones are running around headfirst! Measures Height: Ø Weight 19.7 cm 6.6 cm 112 gr.
    4778OLAF
    Special Price €15.74 Regular Price €19.67
    Only 3 left
    Only 3 left
  38. Nordic Ware - Nutcracker Cakelet Pan

    Nutcracker Cakelet Pan 92977

    These fiercely adorable nutcrackers are a perfect addition to your holiday dessert table.

    Made of cast aluminum which provides fine details and superior baking performance.

    Distinctive premium nonstick interiors allow for quick release and easy cleanup.

    Product Details Material:

    Cast Aluminum Warranty: Lifetime Warranty

    Weight: 2.20 lbs

    6 Cup Capacity

    MADE IN USA 1. Before initial use and after subsequent uses, hand wash with warm, soapy water. Extended soaking is not recommended. 2. Before each use, brush with butter or shortening and dust with flour or cocoa to coat. Baking spray containing flour may also be used. Do not use regular cooking spray. 3. Mixes and recipes may vary. Fill the pan no more than 3/4 full to avoid overflow. 4. Metal utensils, scouring pads and abrasive cleaners should not be used on nonstick surfaces.

    NW92977
    €51.56
    Only 1 left
    Only 1 left
  39. Sigg - Kids Water Bottle VIVA ONE Elsa 0.5l

    Sigg - Kids Water Bottle VIVA ONE Elsa 0.5l

    Elsa has captured the hearts of many little princesses – they also know too well how difficult it can sometimes be to keep your (magical) powers under control! It’s good to always have a refreshing drink at hand. The high-quality, recyclable VIVA drinking bottle in the “Frozen” design is made from transparent polypropylene, making it possible to always see how much (or little) has already been drunk. All materials are 100% recyclable and free from harmful chemicals, such as estrogen-mimicking substances and phthalates – for safer drinking enjoyment.

    The innovative ONE lid makes the bottle especially convenient: Carry, open, drink, close and seal easily with just one hand.

    Measures Height: Ø Weight 21.2 cm 7.3 cm 128 gr.

    4778FROZEN
    €15.49
    Only 2 left
    Only 2 left
    Rating:
    100%
    5
  40. Due Cigni - Walnut Cutting Board Big - Vela - Design by Pierangelo Brandolisio

    Due Cigni - Walnut Cutting Board Big - Vela - Design by Pierangelo Brandolisio A wooden cutting board for the kitchen truly exceptional, with quality materials and an excellent Italian design, guarantee of elegance in your kitchen - Best knives block set and elegant gift ideas by DUE CIGNI Italy. Cutting board design by Pierangelo Brandolisio CUTTING BOARD Size 26.37" x 11.02" x 0.9" Walnut wood Not dishwasher safe
    7781L
    €77.87
    Only 1 left
    Only 1 left
  41. Ritzenhoff - 40ml Black Label Schnapps by Thomas Marutschke

    Ritzenhoff - 40ml Black Label Schnapps by Thomas Marutschke Ritzenhoff has come from being a simple glass manufacturer to one of the most renown high-tech glassworks in Germany. More than 280 designers from all over the world work for Ritzenhoff – architects, designers and artists along with comic illustrators, advertisers, illustrators, interior designers, set designers and sculptors. They all contribute their own style and differing working methods to an endless variety of ideas – thus Ritzenhoff has created a minor encyclopaedia of contemporary design on glass. The range includes a variety of glassware (beer, water, champagne, schnapps etc) and porcelain gift and tableware (teddybanks, piggybanks, coffee mugs, espresso cups, cappuccino cups etc.). Ritzenhoff is working with designers all around the globe to provide unique and original glassware. For design enthusiasts, collectors and lovers of glassware of exception. Made in Germany.
    9881E
    €11.43
    Only 1 left
    Only 1 left
  42. Pulltex - Wine & Champ Celebration Kit - 4 PIECES

    Pulltex - Wine & Champ Celebration Kit - 4 PIECES Pulltex is the most important brand of wine accessories that provides a wide range of corkscrews and other accessories for professional wine lovers. With more than 20 years of experience in this field, now it occupies first place in the market. The corkscrew of Pulltex are protected with more than 20 international patents especially the patent for the original double lever corkscrew, as well as the double lever and retractable. These patents are a revolution for all the waiters  Pulltex brand is on the market with a smaller number of wine accessories and with the idea of ​​offering a better and easier. After the first lever corkscrew, and 'was launched on the market PULLTAP'S who reinvented a whole new way to uncork a bottle of wine, the patent has been around the international market  Currently, Pulltex is a brand well-placed on the market, offering a full range of accessories designed for all times used to serve wine. Pulltex is and stands for innovation, design, the 'originality, functionality and most importantly, the quality of its products. News by Pulltex: September bucket, wine and sparkling wine - Celebration Kit .Cavatappi retractable double lever allows you to remove the plugs effortlessly into two phases. The pump saves wine takes air from the bottle and keeps the wine for days, while it can also be used as a stopper. The plug-uncork champagne facilitates extraction of champagne cork with little risk and effort. It also acts as a cap once the bottle has been opened. The bucket has an ergonomic design and present. It has two handles for easy transport and a slot for easy emptying. And 'produced in high density plastic, resistant to shocks and variations temperatura.Colore: gold
    0685CK
    €65.49
    Only 1 left
    Only 1 left
  43. Pulltex - Wine & Champ Celebration Kit - 3 PIECES

    Pulltex - Wine & Champ Celebration Kit - 3 PIECES Pulltex is the most important brand of wine accessories that provides a wide range of corkscrews and other accessories for professional wine lovers. With more than 20 years of experience in this field, now it occupies first place in the market. The corkscrew of Pulltex are protected with more than 20 international patents especially the patent for the original double lever corkscrew, as well as the double lever and retractable. These patents are a revolution for all the waiters  Pulltex brand is on the market with a smaller number of wine accessories and with the idea of ​​offering a better and easier. After the first lever corkscrew, and 'was launched on the market PULLTAP'S who reinvented a whole new way to uncork a bottle of wine, the patent has been around the international market  Currently, Pulltex is a brand well-placed on the market, offering a full range of accessories designed for all times used to serve wine. Pulltex is and stands for innovation, design, the 'originality, functionality and most importantly, the quality of its products. News by Pulltex: September wine and sparkling wine - Celebration Kit Corkscrew retractable double lever allows you to remove the plugs effortlessly into two phases. The pump saves wine takes air from the bottle and keeps the wine for days, while it can also be used as a stopper. The plug-uncork champagne facilitates extraction of champagne cork with little risk and effort. It also acts as a cap once the bottle has been aperta.Colore: gold
    0685C
    €32.70
    Only 1 left
    Only 1 left
  44. Vin Bouquet - Extractor for Champagne

    Here is an extractor for Champagne stoppers and completely innovative sparkling wines! No effort required! Simply place it on top of the cap, and apply pressure with the palm of the hand. Thanks to an ingenious system of springs and levers, the cap will come out easily without effort. This caps extractors by Vin Bouquet has an original and effective design for your party nights. Materials: rubber and stainless steel. Dimensions: 14.5 x 10 x 4 cm.
    8105C
    €26.23
    Only 2 left
    Only 2 left
  45. Wahl - Super Taper Cordless Li-Ion - Professional Hair Clipper - 08591-016

    Cordless, single-speed hair clipper with excellent cutting capabilities and low vibration and noise level. 100% Made in USA

    Up to 90 minutes of uninterrupted operation when fully charged.
    With high-precision, stainless steel, chrome-plated, rust and oxidation-resistant blades.
    Convenient knurled lever on the side of the clipper allows you to adjust the cutting height from 1mm to 2mm quickly.
    ProLithium Technology battery rechargeable in 120 minutes

    Package includes oil for blade maintenance and lubrication, cleaning brush and four plastic spacers (3 - 6 - 10- 13 mm).

    Good for professionals, great for individuals

    Guaranteed inspection by our in-house service and resharpening laboratory. We recommend constant lubrication using the oil provided inside the package to be applied to the blades after each use.

    08591-2316H
    €102.46
    Only 2 left
    Only 2 left
    Rating:
    95%
    4.8
  46. Achilles - Raspa diamond for removal for pedicures

    Achilles - Diamond rasp for pedicure removal

    Achilles is used in a very simple way: one passes slightly on the calluses as one pumice stone or a file, but unlike these it is not consumed and has a long duration, as well as a markedly higher efficacy. It can be used both with water, for a lighter action, both dry, for a more decisive abrasion. Like the ancient hero Greek, has an exceptional strength, because it exploits the qualities of the mineral out of the ordinary most precious in the world, but, unlike the Iliad warrior, the heel is no longer his weakness! Achilles: highlight your feet. From today dry skin and callousness have a new enemy: Achilles, a pad with real powder of diamond that makes the skin smooth and soft. It is composed of a diamond cloth attached to a light and resistant support.

    The canvas exploits the well-known physical properties of the diamond to all: it is the hardest mineral that exists in nature and cannot be scratched by anyone else material. Its use is very broad, but represents an absolute novelty in the world of cosmetics and personal care. The support has an ergonomic shape that facilitates the taken and floats in water, thus favoring its use even in the bathtub.

    Achille is sold inside an elegant black bag that can be closed and re-opened all as often as you like and it is convenient to hook it easily in the shower or over the bath. Red: light abrasion for light calluses and normal skin.

    8415
    €16.31
    Only 5 left
    Only 5 left
  47. Zoku - 12oz Stainless Steel Bottle

    Zoku - 12oz Stainless Steel Bottle The Vacuum Insulated Stainless Steel Bottle makes sure cold beverages stay that way for up to 30 hours. And hot beverages do not lose steam, maintaining heat for up to 10 hours. Designed to take a hit, this double-walled bottle is made of heavy gauge 18/8 stainless steel, yet remains easy to carry with removable paracord lanyard. Includes: 1 Vacuum Insulated Stainless Steel Bottle Care: Hand Wash, Do not use dishwasher Capacity: 12 fl. oz.
    ZKSSB-0,350
    €20.41
    Only 3 left
    Only 3 left
  48. Zassenhause - Nuts - Beeswax Honeycomb - 4 pieces

    Zassenhause - Nuts - Beeswax "Honeycomb" - 4 pieces

    4 beeswax towels with honeycomb decoration - 16x16 cm

    Advantages: The beeswaxes are made from 100% natural materials: organic cotton, beeswax, jojoba oil and tree resin

    They are reusable, biodegradable and sustainable

    Reusable for up to a year

    Perfect for wrapping onions

    For cleaning, simply rinse with lukewarm (max 40 ° C) water.

    The wipes can also be used to cover small bowls and cereal bowls

    Not suitable for raw meat and raw fish

    0554651
    €11.48
    Only 4 left
    Only 4 left
  49. Kyocera - Santoku Knife 14cm - Ceramica KyoTop Made in Japan - KT-140-HIPD - coltello da cucina

    Vincitore del prestigioso ed internazionale Good Design Award 2001 per l'originalità e la funzionalità del suo design.

    - Lama in ceramica Ishi-Ba Sandgarden HIP nera di 14 cm.
    - Manico in legno


    Qualità made in Japan dal 1984

    Con i coltelli in ceramica Kyocera cucinare diventa puro piacere. Le loro speciali caratteristiche:

    - lama in ceramica di zirconia ultra-tagliente, molata a mano
    - lama estremamente robusta e resistente alla corrosione
    - materiale high-tech con ottima tenuta del filo all'usura
    - assoluta precisione di taglio grazie alla superficie liscia e compatta della lama
    - massima leggerezza ed estrema praticità grazie al manico ergonomico

    I dieci segreti di Ishi-Ba:

    * non trasporta gusti ed odori
    * è di materiale inerte
    * non provoca reazioni chimiche con gli alimenti
    * evita sapori sgradevoli di metallo
    * non arrugginisce
    * non si deteriora
    * non ha parti ossidabili
    * è facile da lavare, basta sciacquarlo
    * è leggerissimo e maneggevole
    * rimane perfettamente affilato, anche per anni

    L'origine della gestione del Gruppo Kyocera è la filosofia di Kyocera, una filosofia di vita basata sulle esperienze della vita reale e sulle regole empiriche di Kazuo Inamori, fondatore e presidente emerito di Kyocera Corporation. Con la domanda "Qual è la cosa giusta da fare come essere umano?" come criterio principale, la filosofia di Kyocera descrive il significato dell'impegno per una gestione corretta e dell'agire in conformità con i valori umani etici e morali e le norme sociali fondamentali. 

    PRIMA DI UTILIZZARE IL COLTELLO LEGGA ATTENTAMENTE QUESTE ISTRUZIONI E LE CONSERVI

    Questo coltello funzionerà per vari anni senza nessun problema se:
    • Lo toglie dal supporto per coltelli o dal cassetto
    • Lo utilizza per tagli diritti da eseguire su tagliere
    • Lo lava e l'asciuga
    • Lo rimette nel supporto per coltelli o nel cassetto dopo averlo utilizzato

    USO
    Ideale per tagliare frutta, verdure e carni senza osso
    Il termine verdure e frutta è generic: non si possono elencare tutti i tipi di frutta o verdura sconsigliati,ma è tassativamente sconsigliato l’utilizzo su frutta e verdura dutra (zucca, noci di cocco, ecc, )
    Utilizzi sempre un tagliere di plastica o legno; eviti di tagliare su marmo, pietra, piatti o piastrelle Per trinciare, separare e disossare, così come per tagliare alimenti duri, congelati, pane con crosta e formaggi, utilizzi sempre i suoi coltelli tradizionali in acciaio. Questi tipi di taglio richiedono flessione e torsione e, per questo motivo, conviene utilizzare un materiale più flessibile rispetto alla ceramica.
    Per la sua protezione, la punta e la base della lama non sono affilate

    PULIZIA
    Lavare a mano con acqua e detersivo per piatti.
    I coltelli in ceramica Kyocera con manico in plastica possono essere messi in lavastoviglie. Vanno riposti nel vano dedicato a mestoli e piccoli accessori nel cestello superiore, evitando il contatto con altri utensili in metallo. I coltelli in ceramica Kyocera con manico in legno non possono essere lavati in lavastoviglie.
    Nel caso si producessero scolorimenti che non scompaiono con la normale pulizia, lavi la lama (non l'impugnatura) con una leggera soluzione a base di candeggina.

    EVITARE
    Non lasciare cadere su superci dure.
    Non utilizzare la punta come punto di rotazione, l'estremità a§lata potrebbe penetrare nel tagliere, bloccarsi e rompersi Non esporre la lama alla amma diretta (la ceramica è un conduttore di calore). Non utilizzare la parte laterale della lama per schiacciare aglio o altri alimenti.

    CONSERVAZIONE
    Lo collochi in un supporto per coltelli, un fodero o un cassetto. Quando colloca o toglie il coltello dal supporto, faccia attenzione a non danneggiare la punta della lama.

    USURA
    Con il trascorrere del tempo tutti i coltelli perdono l'a§latura. Un lama di metallo dolce (acciaio inossidabile) "slitta" quando perde l'affilatura. I metalli più duri (come l'acciaio con carbonio) rimangono affilati più tempo, però perdono l'affilatura in modo diverso. I materiali più duri, invece di "slittare", tendono a scheggiarsi leggermente.
    All'inizio la ceramica è più affilata - e rimane a§lata per più tempo. Con il trascorrere del tempo possono prodursi delle piccole incisioni sul lo della lama. Si tratta del processo normale per il quale perdono l'a§latura tutte le lame in materiale duro.
    Nonostante la loro apparenza, l'esistenza di piccole incisioni non signica necessariamente che il coltello non sia a§lato. Potrà constatare che funziona perfettamente durante un periodo di tempo prolungato.
    Quando il rendimento del coltello non sarà più quello desiderato, il processo di a§latura Kyocera farà si che il suo coltello torni ad avere un lama ben affilata.
    È possibile che le incisioni più profonde e una punta rotta si possano risolvere grazie alla nuova affilatura.

    KT-140-HIPD
    €245.08
    Only 1 left
    Only 1 left
  50. Lord of the Rings - Ciondolo di Arwen 704.75 - Il Signore degli Anelli

    Evenstar, il bellissimo pendaglio che Arwen dona ad Aragorn come pegno di amore. Lui ama custodirlo gelosamente serbandolo sempre con se, per ricordarsi del suo elfico amore che ha rinunciato alla vita eterna per lui. Difendendo il popolo di Edoras, gli viene strappato da un orco sul campo di battaglia; Legolas lo recupererà per riconsegnarglielo alla corte di Rohan.

    Questo bellissimo ciondolo è prodotto in metallo anallergico bagnato in argento, con sette pietre swarovski di colore bianco.

    Viene accompagnato da una confezione composta da uno scrigno cartonato raffigurante l'immagine della Terra di Mezzo, un sacchetto in velluto con impresso il logo "The Lord of The Rings" e un certificato che ne garantisce l'autenticità.

    E' un prodotto accompagnato da licenza ufficiale New Line Cinema

    Misure: 6 x 3 x 1.3 cm.
    4516
    €34.43
    Only 2 left
    Only 2 left
    Rating:
    99%
    5
  51. Silikomart - Sugarflex - Natale - Babbo natale - SALDI

    Sugarflex Gold
    Una linea al servizio del professionista per realizzare decorazioni e sculture di grande effetto.
    SugarflexGold è la collezione di stampi in silicone alimentare al 100%, nata per offrire al professionista uno strumento d'uso e d'ispirazione unico per la lavorazione artistica dello zucchero e del cioccolato e per realizzare la decorazione per le proprie creazioni in pasticceria.
    Una collezione ricca e completa che recupera concetti legati alla tradizione, suggestioni visive prese dal mondo dell'arte o ispirazioni geometriche.
    I pezzi delle collezione sono suddivisi per temetiche diverse:permettono di realizzare sculture decorative da esporre come elementi scenografici per grandi eventi celebrativi come matriimoni, battesimi, ceriminie ufficiali oppure sono adatti come componenti multipli di grandi sculture di zucchero per catering e banqueting o perfetti per realizzare diamanti o gioielli di zucchero.
    SugerflexGold si rivolge, quindi, sia a professionisti del settore con alta esperienza sia, grazie alla facilità d'uso degli stampi in silicone, a chi entra per la prima volta nel settore e vuole realizzare decorazioni facili e d'effetto per le proprie creazioni in pasticceria.
    Tutti gli stampi, grazie alla flessibilità del silicone, permettono un'elevata facilità di smodellatura, sono adatti per la colatura sia dello zucchero che del cioccolato e reggono temperature compreso fra -60° e + 230°.
    Le misure dello stampo sono: 140x100 mm.
    S1001
    Special Price €93.83 Regular Price €130.33
    Only 1 left
    Only 1 left
  52. Two Swans - Full Shank Crescent - 2C740/25

    Two Swans - Full Shank Crescent - 2C740/25

    • Highest quality X50CrMoV15 with Satin finish
    • Black POM handle with stainless steel rivets, a very strong and durable plastic material suitable for dishwasher safe use
    • Blade length 25 cm
    2C740/25
    €32.79
    Only 4 left
    Only 4 left
  53. Zassenhaus - Countertop board - 39x39 cm

    Zassenhaus - countertop board - 39x39 cm

    Zassenhaus - countertop board High quality work board with stop edge, reversible.

    Elaborate processing - high hardness - Extreme Endurance - knife gently Dimension: 39x39x4,5 cm Material: end grain wood Zassenhaus - Committed a traditional brand Enjoyment and quality of life are more related to kitchen and cooking than everything else. This includes the preparation, too. The aroma of fresh hand ground coffee, fresh peppercorns or spicy pepper remember of the past.

    Zassenhaus stands in this context all times with its coffee and spice mills. Passion and craftsmanship draw the Zassenhaus products, which impress with creative beauty, technical precision and innovation as well as sturdiness and stand for timeless elegance and aesthetics. Spices and coffee unfold through the processing of the various products of the Zassenhaus mill collection perfect their flavors.

    050929
    €47.54
    Only 1 left
    Only 1 left
  54. Nitecore - SRT7i - Smart Ring Tactical - 3000 Lumen Long Throw and 580 meters - USB-C Rechargeable Led Torch

    Introducing the NITECORE SRT7i, the latest advancement in the Tactical SmartRing Series. This flagship model represents a breakthrough in the field of tactical flashlights, being equipped with the 4th generation of the Smart Switch, which allows a twist and a push for one-handed control of mode switching and stepless brightness adjustment. This feature makes it particularly suitable for tactical use and immediate response to various situations.

    KEY FEATURES:
    * Dual tail switches allow for intuitive operation, specifically tailored for law enforcement, hunting and tactical applications.
    * Fourth generation of SSR (Smart Selector Ring) technology to quickly and smoothly select brightness levels and operating modes
    * Maximum peak beam intensity of 87,500cd and maximum range of 580 meters with maximum autonomy of 800 hours
    * STROBE READY™ technology to allow quick access to STROBE mode (patent no. ZL201320545349.4)
    * Li-ion battery intelligent charging circuit via USB-C port
    * NITECORE 21700i Li-ion battery included (NL2150HPi 5,000mAh)
    * Built-in Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
    * Break glass on silicon nitride ceramic torch head
    * Constructed of aircraft grade aluminum alloy with HA III military grade hard anodized finish
    * Waterproof and dustproof grade according to IP68 standard (2 meters submersion) and shock resistant up to 2 meters

     


    TECHNICAL SPECIFICATIONS:

    Led: 1x SFT-70 high performance LED, with a life cycle of 50,000 hours
    Operating modes: adjustable light output, between 0.1 to 3000 lumens and 1 strobe, electronically regulated
    Powers and Durations: 3000 Lumens (3.15h) -> LOW 100 Lumens -> ULTRA LOW 0.1 Lumens (800h) -> Strobe 3000 Lumens
    Peak power: 87500 candles
    Maximum lighting distance: 580m.
    Power-on Method: Back Button and StrobeReady Button
    Luminous dial method: Smart Dial Ring and double buttons
    Head: aircraft aluminum
    Body: aircraft aluminum
    Finish: anodized, Type III
    Lens: Ultra clear hardened glass with anti-reflection treatment
    Batteries: (included): 1x 21700 3.6V 18W NL2150HPi - also compatible with 2x CR123 3.0/3.6/3.7V using included adapter
    Measurements: 16.3cm (L) - 2.54cm (D shaft) - 4.0cm (D head) - 3.1cm (D shank)
    Weight: 175g. without batteries
    Accessories: NITECORE 21700i Rechargeable Li-ion Battery (NL2150HPi 5,000mAh), CR123 Battery Adapter, Holster, Clip, Lanyard, Spare O-ring, USB-C Charging Cable
    Waterproof: as per IP68 standard, submersible up to 2m. of depth for 30min.
    Impact resistance: withstands drops from 2m in height

    NI-SRT7i
    €127.05
    Only 0 left
    Only 0 left
    Out of stock
  55. Al-Mar - Hawk - Iron Wood 1002 Full Set - PRIVATE COLLECTION - Vintage knife

    KNIFE TAKEN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Very good condition, close to new
    * Commercially available: Discontinued
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: Some small hairline on heads and metal insert
    * Box: Present - Original
    * Scabbard: Present - Original
    * Manuals, Certificates and Warranties: - - Original
    * Checked and certified by our in-house laboratory


    Intended Use: Gentleman / Collection

    Production type: Industrial
    Country of manufacture: Seki - Japan
    Blade: AM-6 stainless steel
    Blade treatment: satin finish
    Handle: iron wood, nickel silver insert, stainless steel heads and brass folders
    Blade length: 64mm.
    Blade thickness: 2mm.
    Length closed: 85mm.
    Total length: 147mm.
    Weight: 53g.
    Closure: Back Lock
    Sheath: Nylon, with belt loop and Velcro closure
    Packaging: Cardboard box with Al Mar logos
    Notes: Previously purchased - Near mint condition - Full Set

    AM-1002CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  56. Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife

    Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.

    Intended use: Collection / Tactical
    Type of production: Industriae
    Country of production: Japan, Seki
    Blade: AM-6 stainless steel
    Blade treatment: satin finish
    Handle: in rubber, with brass spacers
    Blade length: 110mm.
    Blade thickness: 4mm.
    Length closed: 150mm
    Total length: 255mm.
    Weight: 320g.
    Closing: Back Lock
    Sheath: leather, new
    Packaging: cardboard box, with Japanese logos, but not original Al-Mar
    Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left head

    AM-3002DOL
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  57. Denis Simonutti - Mist - Limited Edition #4 - M390 Black PVD Titanium - Craft Knife

    Intended Use:  Collection

    Type of production: Midtech
    Country of Production: Italy
    Blade: Stainless steel M390 58/60HRC
    Blade Treatment: PVD Blacwashed
    Handle: Titanium with PVD Blacwashed treatment and bronze-colored anodized titanium spacers
    Blade length: 78mm.
    Blade thickness: 3mm.
    Length closed: 102mm.
    Total length: 180mm.
    Weight: 110g.
    Closure: FrameLock
    Clip: Bronze-colored anodized titanium, machined from solid
    Packaging: Denim pouch, warranty certificate, Velcro patch, small 6-sided playing dice
    Notes: Designed and made by Denis Simonutti - Specimen number 4 of a micro-production batch of only 10 pieces

    DS-MIST4
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  58. Andrea Pizzadili - Pattada 23cm Sardinian mouflon horn - PRIVATE COLLECTION - handcrafted knife

    Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory

     


    Intended Use: Regional Italian / Collection

    Type of production: Artisan
    Country of Production: City of Pattada, Sardinia, Italy
    Blade: 420 stainless steel
    Blade finish: satin-finished
    Handle: Sardinian mouflon horn and alpaca
    Blade length: 105mm.
    Blade thickness: 2.5mm.
    Length closed: 125mm.
    Total length: 230mm.
    Thickness when closed: 17mm.
    Weight: 74g.
    Closing mechanism: -
    Clip: -
    Sheath: -
    Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
    Notes: knife withdrawn from private collection, mint condition, like new

    AP-PATMU-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  59. Fox - Saturn knife by D. Simonutti - Black PVD Titanium - FX-551TiPVD - knife

    Intended Use: Sporting / Collection

    Type of production: Industrial
    Country of Production: Italy
    Blade: stainless steel M390 58/60HRC
    Blade treatment: PVD Blacwashed
    Handle: Titanium with PVD Blacwashed treatment
    Blade length: 60mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 160mm.
    Weight: 130g.
    Closure: Fingers Safe Opening System
    Clip: Titanium machined from solid
    Packaging: box with Fox Knives logos, warranty certificate
    Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"

    FX-551TiPVD
    €327.05
    Only 0 left
    Only 0 left
    Out of stock
  60. Strider Knives - AR Tiger Stripe - Flat G10 Scales S30V by Paul Bos - PRIVATE COLLECTION - knife

    Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.

     


    Intended Use: Tactical

    Manufacturing Type: Mid Tech (semi-craft)
    Country of Production: USA
    Blade: Stainless steel CPM-S30V hardened by Paul Bos
    Blade Treatment: Tiger Stripe
    Handle: G10 flat with 2mm titanium liners
    Blade length: 103mm.
    Blade thickness: 5mm.
    Length closed: 137mm.
    Total length: 240mm.
    Thickness closed: 18mm.
    Weight: 228g.
    Closure: Liner Lock
    Clip: Titanium 
    Package: Nylon pouch with zipper 
    Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the blade

    ST-AR-CPR
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  61. Wander Tactical - Tryceratops knife Clip Point - SanMai V-Toku2 & Black Micarta - custom knife

    Japanese steel blends with Italian excellence

    For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

    Tryceratops model .:

    Use: Tactical / Utility

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 70mm.
    Blade thickness: 6.5mm.
    Total length: 130mm.
    Balancing: set back
    Weight: 188g.
    Sheath: in kydex black
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer tool life

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-TRY-C-VT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  62. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom knife

    In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
    This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Production Lama: Italy
    Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Total length: 200mm.
    Balancing: set back
    Weight: 229g.
    Sheath: in Kydex, thermoformed, with belt loop
    Packaging: certificate of authenticity
    Notes: unique and exclusive piece

    As in the ancient Japanese Samurai swords.

    The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

    - Longer tool life

    thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

    - Greater resilience
    built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

    - Easy processing even after heat treatment
    although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  63. Deroma - Pattada knife craft knife in ram's horn - 27cm - craft knife

    Intended use: Regional

    Type of production: Artisan
    Lama production: Italy
    Blade: 12c26 stainless steel
    Blade treatment: -
    Handle: ram horn
    Blade length: 110mm.
    Blade thickness: 3mm.
    Length closed: 150mm.
    Total length: 270mm.
    Thick when closed: 19mm
    Balancing: -
    Weight: 105g.
    Closing: without blade lock
    Clip: -
    Sheath: -
    Packaging: rigid packaging with artisan production certificate signed by Antonio Deroma
    Note: -

    DR-RES-27
    €307.38
    Only -50 left
    Only -50 left
    Rating:
    80%
    4
    Out of stock
  64. Wildsteer - Baby Wild Tactical knife - archer knife

    Intended use: hunting / hiking / collection

    Type of Industrial Production
    Blade: Sandvik 13C26
    French Lama production
    Handle: leather
    Blade length: 90mm.
    Blade thickness: 4mm.
    Total length: 200mm.
    Balancing: backward, at 2cm. from the guard branch
    Weight: 92g.
    Sheath: leather
    Packaging: cardboard box

    WS-CU-B
    €122.13
    Only 0 left
    Only 0 left
    Out of stock
  65. Museum Replicas Windlass - Accolade Dagger of the Knights Templar 404335 - craft dagger

    This extraordinary medieval dagger is the ideal companion for the Accolade sword.
    The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
    Beautiful leather sheath.
    Blade: carbon steel
    Handle: brown leather
    Knob: carbon steel
    Guard: carbon steel
    Sheath: black leather
    Blade length: 260mm.
    Handle length: 100mm.
    Total length: 420mm.
    Blade width: 24mm.
    Blade thickness: 4.5mm.
    Weight: 565g.
    Weight with sheath: 713g.

    404335
    €131.15
    Only 0 left
    Only 0 left
    Out of stock
  66. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom

    In collaboration with Wander Tactical we have decided to offer their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.

    This time, in the rich catalog of products offered by them, we chose a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.

    Use: EDC / Light Utility / All Round

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 82mm.
    Blade thickness: 6.8mm.
    Total length: 200mm.
    Balancing: backward
    Weight: 215g.
    Sheath: Kydex, thermoformed, with belt loop
    Packaging: certificate of authenticity
    Notes: unique and exclusive piece

    WT-SC-VT2B
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  67. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-TR-VT2
    €225.41
    Out of stock
  68. Wander Tactical - Raptor knife - SanMai V-Toku2 & OD green Paracord - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    RAPTOR model:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 6.5mm.
    Total length: 178mm.
    Balancing: backward
    Weight: 136g.
    Sheath: black kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-RAP-VT2
    €229.51
    Out of stock
  69. Wander Tactical - Lynx knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    Lynx Model:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 107mm.
    Blade thickness: 6.5mm.
    Total length: 237mm.
    Balancing: backward
    Weight: 310g.
    Sheath: brown leather
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-LY-VT2
    €409.84
    Out of stock
  70. Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife

    Japanese steel merges with Italian excellence

    For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

    SCRAMBLER Model .:

    Occupation: Tactical / Utility

    Type of production: Artisan
    Lama production: Italy
    Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
    Blade finish: satin finish
    Handle: Micarta
    Blade length: 95mm.
    Blade thickness: 6.5mm.
    Total length: 210mm.
    Balancing: backward
    Weight: 212g.
    Sheath: brown kydex
    Packaging: -
    Notes: Each knife is unique and handcrafted - Wander Tactical certified

     

    As in the ancient swords of the Japanese Samurai.

    Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

     

    - Longer tool life
    thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

    - Greater resilience
    built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Better corrosion resistance
    the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

    - Easy processing even after heat treatment
    although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

    - Improvement of the aesthetic result
    The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    For more information: collinisteel

    WT-SC-VT2R
    €278.69
    Out of stock
  71. White River Knife & Tool - M1 Backpacker Pro knife - Black G10 - knife

    Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

    Intended use: Hunting / Sports

    Type of production: Artisan
    Blade production: USA
    Blade: CPM-S35V 58 / 60HRC stainless steel
    Blade treatment: -
    Handle: Paracord
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: -
    Total length: 175mm.
    Thick when closed: -
    Balancing: -
    Weight: 80g.
    Closing: -
    Clip: -
    Sheath: in Kydex
    Packaging: Wooden box with WRKT logos
    Note: -

    WR-BPP-TBL
    €143.44
    Only 0 left
    Only 0 left
    Out of stock
  72. White River Knife & Tool - Firecraft FC4 knife - Kydex - knife

    Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.


    Intended use: Hunting / Sports

    Type of production: Artisan
    Blade production: USA
    Blade: CPM-S35VN 58 / 60HRC stainless steel
    Blade treatment: -
    Handle: micarta
    Blade length: 100mm.
    Blade thickness: 3.5mm.
    Length closed: -
    Total length: 225mm.
    Thick when closed: -
    Balancing: 2 cm backward
    Weight: 172g.
    Closing: -
    Clip: -
    Sheath: in kydex
    Packaging: Wooden box with WRKT logos
    Notes: flintlock housed in a scabbard pocket
    Send feedback
    History
    Saved

    WR-FC4K
    €233.61
    Out of stock
Set Ascending Direction

Items 1-72 of 113

Page




ecommerce sicuro