Dicembre 2020

Why waste time going around a bush when you can cut it down? Prepare for your excursions with complete peace of mind having the Leuku 202 at your side!
This no-frills fixed blade is built for strenuous bushcradt sessions while maximizing grip comfort.

Intended use: Utility / Hiking

Type of production: Industrial
Country of production: USA
Blade: CPM-3V 60-62 HRC steel
Blade finish: Satin finish
Handle: Santoprene Ranger Green
Blade length: 132mm.
Blade thickness: 3.5mm.
Total length: 246mm.
Weight: 128g.
Sheath: in leather
Packaging: Cardboard box with Benchmade logos
Note: -

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
Selvan model: for this First Production Run a run of 5 pieces numbered from 1 to 5 was created.

The Selvans was born from the collaboration between Extrema Ratio and FISSS (Italian Federation of Sports and Experimental Survival). The project consists of modifying the Ontos, a military survival knife, to accentuate and maximize the performance of the knife as a hiking tool.

The handle has been lengthened and the blade weighted to favor the effectiveness of the cutting strokes and to make more use of the inertia of the stroke.

Intended use: Heavy Utility
Type of production: Industrial
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Testudo
Handle: Forprene
Blade length: 15.5mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Thick when closed: -
Balancing: advanced
Weight: 424g.
Sheath: nylon, MOLLE compatible
Packaging: Cardboard box with Extrema Ratio logos
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin finish
Handle: in titanium with walnut wood grips
Blade length: 80mm.
Blade thickness: 4mm.
Closed length: 107mm.
Total length: 190mm.
Thick when closed: 14mm.
Weight: 113g.
Closure: Back Lock
Clip: titanium
Sheath: leather sheath
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Made from the very famous 499 Pilot's Survival Knife (Air Force Survival Knife), the OKC Journeyman Knife is ideal for outdoor activities. The OKC Journeyman knife features a sturdy 10cm blade with a sawn back, made from 1095 high carbon steel with a black phosphated finish. The Ontario Journeyman Knife comes with a leather sheath and is entirely made in the USA.

Intended use: tactical / sports
Type of production: Industrial
Country of production: USA
Blade: 1095 black texture powder coated steel
Handle: leather discs
Blade length: 10mm.
Blade thickness: 4.5mm.
Total length: 217mm.
Balancing: 2 cm back from the guard branch
Weight: 252g.
Sheath: in leather
Packaging: cardboard box with Ontatio Knife Company logos

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: in tool steel D2
Blade treatment: Black
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: by thumbstood, by right-handed
Washers: teflon
Closure: liner lock
Clip: in stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob Dozier

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Knife in use for certain information until the first half of the 19th century in the Tuscan and Lazio Maremma.
Through finds from the criminological museum of Rome, he was seen among those knives handed over by the rioters of the penal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to put down a revolt.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 205mm.
Weight: 56g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

This slender-shaped knife with a curved handle derives from ancient models, used by the shepherds of Abruzzo.
Its adoption in the repertoire of knives manufactured in Scarperia (where the particular fold of the handle earned it the name of "hunchback") dates back to the end of the nineteenth century and took place without obvious changes compared to the original type, equipped with a simple spring and one piece bovine horn handle.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 200mm.
Weight: 60g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.
Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine
Invia commenti
Riquadri laterali