Escursionismo e Torce

MH25 PRO flashlight + RSW1 PRO remote switch kit

TECHNICAL SPECIFICATIONS:

Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 124300 candles
Maximum lighting distance: 705m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
Weight: 130g. without batteries
Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable, 
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

The Nitecore EDC33 is a high-performance Every Day Carry (EDC) flashlight, ideal for daily use due to its outstanding brightness and projection distance. Equipped with the innovative NiteLab UHi 20 MAX LED, it provides a powerful 4000-lumen light output and an impressive range of about 450 meters.

Key Features:
Maximum Brightness: 4000 lumens with a range of approximately 450 meters.
Brightness Modes: Four brightness levels, plus search and Lumin Shield modes.
Easy-to-Use Rear Switch: One-click on/off; mode change with a half-click.
Hidden USB-C Charging: Built-in charging port, easily accessible.
Lockout Functions: Total and partial lockout to prevent accidental activations.
Included Accessories: Wrist lanyard, USB-C charging cable, clip.
High-Performance EDC:

Ideal for everyday carry, the EDC33 ensures a high-intensity beam, controllable through the rear switch. You can select and memorize the desired brightness level, which will remain set even after turning off the flashlight. The 1700-lumen search modes and the maximum power of 4000 lumens are easily activated.

USB-C Rechargeable:

With the convenience of USB-C rechargeability, the EDC33 can be fully charged in just 2 hours and offers up to 63 hours of continuous use in the lowest mode. It includes a power indicator to monitor the charging status.

Compact and Durable:

The EDC33 is only 11.56 cm long and weighs 127 grams (with clip), making it easily pocketable. Waterproof according to IP68 standards and shock-resistant up to 2 meters, it is designed to ensure reliability in any environment.

TECHNICAL DATA:

TECHNICAL SPECIFICATIONS

LED: UHi 20 MAX LED
Maximum Brightness: 4000 lumens
Peak Beam Distance: 449.59 meters
Peak Beam Intensity: 40505 cd
IP Rating: IP68
Impact Resistance: 2 meters

Dimensions:
Length: 11.56 centimeters (4.55 inches)
Head Diameter: 2.54 centimeters (1.00 inch)
Tube Diameter: 2.39 centimeters (0.94 inch)
Weight (with clip): 127.01 grams (4.48 ounces)

BRIGHTNESS OUTPUTS

MODE | OUTPUT | RUNTIME
Lumin Shield (Floodlight): 4000 lumens | ~
Search (Spotlight): 1700 lumens | ~
High: 1200 lumens | 2 hours and 31 minutes
Mid: 300 lumens | 6 hours and 58 minutes
Low: 70 lumens | 31 hours
Ultralow: 5 lumens | 63 hours

Accessories: Wrist lanyard, clip, USB charging cable

For a detailed analysis of this product's features, read the in-depth review on our blog.

TECHNICAL SPECIFICATIONS:

Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 124300 candles
Maximum lighting distance: 705m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
Weight: 130g. without batteries
Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable, 
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

NITECORE has launched the MH12 Pro, an ultra long-range electric torch with a maximum power of 3,300 lumens. This marks the first electric torch by NITECORE equipped with the LED NiteLab UHi 40 - the newly developed LED with a round light emitting surface (LES), ultra high light intensity and a maximum power of 40W.

Compact yet powerful, the MH12 Pro surpasses medium-sized electric torches (40mm head) not only in terms of power, but also beam distance. Thanks to the cutting-edge LED UHi 40, it can provide a remarkable power of 3,300 lumens, and offers a maximum peak beam intensity of 63,500cd and a maximum range of 505 meters, ideal for emergencies, night searches, outdoor activities, maintenance checks, and more. The round LES of the LED UHi 40 matches perfectly with the round reflector, allowing high light conversion efficiency and a bright and clear hotspot, which helps to quickly and accurately identify targets at night.

The body of the MH12 Pro is made with precision CNC machining and features a non-slip knurling. With a 1mm thick texture, users can maintain a secure grip even with sweaty, wet hands, or when wearing gloves. Moreover, on the front of the torch, there are 4 power indicators and 4 level indicators, which allow intuitive control of the torch status. The U-shaped tail cap is available to prevent accidental activations and offers the possibility of tail standing, along with a hole for lanyard attachment.

The MH12 Pro includes a NITECORE Li-ion battery NL2153HP 21700 with a huge capacity of 5,300mAh and a continuous discharge current of 20A, powering the light for a total of 650 hours at ULTRALOW level. A USB-C charging port with a reversible plug-in is available for direct charging.
The MH12 Pro also has a sensor protection function. When the integrated optical sensor detects an obstacle at a short distance, the brightness of the torch will automatically decrease to prevent overheating. The Daily Mode and Tactical Mode are available for different uses. In addition to a highly efficient constant current circuit (non-PWM), it is also rated IP68 (immersion up to 2m) with a 1 meter impact resistance.

TECHNICAL SPECIFICATIONS:
Led: 1x Luminus UHi 40 with a life cycle of 50,000 hours
Operational Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (0.30h) -> 1200 Lumens (4.30h) -> 300 Lumens (8.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 63500 candles
Maximum illumination distance: 505m.
Ignition Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 21700 3.6V NL2153HP 5,300mAh - also compatible with 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via adapter, sold separately)
Measurements: 13.8cm (L) - 2.6cm (D barrel) - 2.68cm (D head) - 2.7cm (D tail)
Weight: 81.5g. without batteries
Accessories: Rechargeable Li-ion battery NITECORE 21700 (NL2153HP 5,300mAh), USB-C charging cable, Clip, Wrist strap, Replacement O-ring, Nylon sheath
Waterproof: as per IP68 standard, submersible up to 2m. deep for 30min.
Impact resistance: resistant to falls from 1m height
Real powers and durations, certified in the laboratory by ANSI/PLATO FL1-2019 standards

Key Features
* Lightweight, USB-C rechargeable, triple output headlamp
* Primary white LED with a maximum output of 550 lumens
* High CRI white auxiliary light (CRI> 90, warm light)
* Red light illumination designed to preserve night vision
* Uses a unibody optical lens system with various facets that emit a uniform, soft light.
* Built-in 1,800mAh lithium-ion battery
* Built-in intelligent lithium-ion battery charging circuit with USB-C charging port (5V⎓1A)
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 5 brightness levels, 3 light sources and 3 special modes available
* Designed with 4 power indicator lights, to inform about the remaining battery charge
* Made of durable PC material with aluminium alloy front housing
* Compact and lightweight, impact resistant up to 1 metre high
* Waterproof and dustproof to IP66 standard


Led: 1x cold light, depth; 1x warm light CRI >90 for close-up and reading use; 1x red light
Operating modes: 9 different wattages and light modes
Wattages and Durations Cool Light: 550 Lumens (5h. ) -> 200 Lumens (8h.) -> 60 Lumens (38h.) -> S.O.S. -> Beacon Light
Warm Light Powers and Times: 50 Lumens (42h. ) -> 6 Lumens (147h.)
Powers and Times Red Light: 5 Lumens (80h. ) -> 10 Lumens 50h.
Peak power: 5800 candelas
Maximum lighting distance: 145m.
Method of luminsa switching and selection: Two buttons for on, off and selection
Body: ABS and Aluminium
Batteries: 3.7V Li-Ion and 1800mAh built-in, non-removable, with built-in USB-C charging system
Measurements: 6.23cm (L) - 4.6cm (W) - 3.56cm (D) with front stand
Weight: 95.5g. - Battery, stand and elastic band included
Accessories: Elastic headband - USB/USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: -

Key Features
* Lightweight, USB-C rechargeable, triple output headlamp
* Primary white LED with a maximum output of 550 lumens
* High CRI white auxiliary light (CRI> 90, warm light)
* Red light illumination designed to preserve night vision
* Uses a unibody optical lens system with various facets that emit a uniform, soft light.
* Built-in 1,800mAh lithium-ion battery
* Built-in intelligent lithium-ion battery charging circuit with USB-C charging port (5V⎓1A)
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 5 brightness levels, 3 light sources and 3 special modes available
* Designed with 4 power indicator lights, to inform about the remaining battery charge
* Made of durable PC material with aluminium alloy front housing
* Compact and lightweight, impact resistant up to 1 metre high
* Waterproof and dustproof to IP66 standard


Led: 1x cold light, depth; 1x warm light CRI >90 for close-up and reading use; 1x red light
Operating modes: 9 different wattages and light modes
Wattages and Durations Cool Light: 550 Lumens (5h. ) -> 200 Lumens (8h.) -> 60 Lumens (38h.) -> S.O.S. -> Beacon Light
Warm Light Powers and Times: 50 Lumens (42h. ) -> 6 Lumens (147h.)
Powers and Times Red Light: 5 Lumens (80h. ) -> 10 Lumens 50h.
Peak power: 5800 candelas
Maximum lighting distance: 145m.
Method of luminsa switching and selection: Two buttons for on, off and selection
Body: ABS and Aluminium
Batteries: 3.7V Li-Ion and 1800mAh built-in, non-removable, with built-in USB-C charging system
Measurements: 6.23cm (L) - 4.6cm (W) - 3.56cm (D) with front stand
Weight: 95.5g. - Battery, stand and elastic band included
Accessories: Elastic headband - USB/USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: -

FEATURES
* Ultra-light dual-beam USB-C rechargeable headlamp weighs only 45g.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock-resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 45g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

The Nitecore P23i flashlight is the latest addition to the Precise series. Using a Luminus SFT-70 LED with a combined crystal-coated optical system and "Precision Digital Optics Technology" (PDOT), it has a maximum output of 3,000 lumens, ideal for law enforcement, assault operations, the self-defense, search and patrols.

Led: 1x Luminus SFT-70 LED with a life cycle of 50,000 hours
Operating modes: 4, electronically regulated + Strobe
Powers and Duration: 3000 Lumen (30min.) -> 1500 Lumen (2h 30min) -> 800 Lumen (4h) -> 250 Lumen (10h) -> 50 Lumen (45h) -> Strobe 3000 lumen
Peak power: 55300 candles
Maximum lighting distance: 470m.
Ignition method: Rear Button with "Momentary On" system for light signals and Rear "Mode" Button for immediate access to the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aircraft aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra clear hardened glass with anti-reflection treatment
Batteries: Works only with a Nitecore "i series" 21700 rechargeable battery (NL2150i, 5,000 mAh - included in the package).
Measurements: 14.3cm (L) - 2.54cm (D stem) - 3.18cm (D head)
Weight: 113g. batteries excluded
Accessories: wrist strap, cordura sheath, spare o-ring, clip
Impermeability: as per IPX-8 standard, submersible up to 2mt. of depth for 30min.
Sheath: in tactical cordura
Impact resistance: withstands falls from a height of 2m

Italian guarantee Nitecore Italy: Torch guaranteed for 5 years - Battery guaranteed for 12 months

FEATURES
* USB-C rechargeable dual-beam headlamp.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 56g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

KEY FEATURES
* Wide light, depth light and auxiliary red light with a maximum output of 2,000 lumens
* Uses 2x Luminus SST-40-W LEDs for both primary white lights
* The reflector uses a specially designed TIR optical lens for long-range illumination to provide a maximum range of 202 meters and a maximum beam intensity of 10,300cd
* The projector uses TrueVision technology for an ultra uniform beam pattern.
* Continuous light variation for both spotlight and projector (Patent No.: ZL201820778007.X)
* Highly efficient constant current circuit provides light output for up to 800 continuous hours.
* Intelligent lithium-ion battery charging circuit equipped with a USB-C charging port
* 180° tilt angle for different lighting needs
* A charge indicator under the "+" and "-" buttons indicates the remaining battery charge.
* Charge indicator can display battery voltage (±0.1V)
* Built-in ATR (Advanced Temperature Regulation) module (Patent No. ZL201510534543.6)
* Constructed of aircraft grade aluminum alloy
* Military grade HA III ultra durable anodized finish
* Waterproof as per IP68 standard (submersible up to 2 meters)
* Shock resistant up to 2 meters high

TECHNICAL FEATURES
LED: 2x Luminus SST-40-W with 50,000 hour life cycle
Output: 13x digitally controlled light output and 3 signaling modes
Powers and duration spot light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 950 lumens (2.30h.) -> 1800 lumens (30*min. - without taking into account automatic temperature control) -> 2000 lumens (Turbo)
Flood light powers and duration: 1 lumen (800h.) -> 45 lumens (28h.) -> 220 lumens (6h.) -> 850 lumens (2.30h.) -> 1400 lumens (30*min. - without taking into account automatic temperature control) -> Beacon -> S.O.S.
Powers and durations auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (160h.)
Range: up to 202mt.
Peak power: 10300 candles
Usable batteries: 1x 18650HP 3.6V (included in the package) or 2x CR123A 3.0/3.7V disposable or rechargeable
Flashlight dimensions: 91.5x34.75x26.5 mm. 
Weight: 70g (without battery)
Lens: TIR type, in shockproof plastic material
Body: aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Included Accessories: 1x Battery 18650 NL1835HP 3.6V and 3500mAh - USB charging cable - elastic front strap - front bracket
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable provided as standard you can provide for charging the battery supplied, the operation is monitored by a special LED light located next to the buttons of selection light. The charging cable can be attached to any PC equipped with USB port or to any wall or cigarette lighter power supply equipped with USB port.
Notes: waterproof and submersible as per IP68 standard - 1750 lumens of power are achievable only by using a battery with a discharge power equal to or greater than 8A (insluded); using different batteries, the maximum power will be limited to 900 lumens.

ANSI/PLATO FL1-2019 standard certified power and duration tested with 1x 18650 HP 3500mAh

Equipped with 4 CREE XP-G3 LEDs with a lifespan of 50,000 hours, the NPL30 has an output of 1200 lumens, a peak intensity of 3,300 cd and a shooting depth of 113 meters. It is powered by 2 CR123A batteries (included) with a maximum autonomy of 1 hour and 45 minutes. Both switches can perform the same functions to provide ambidextrous light activation. Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and triple press one of the power buttons for STROBE mode, which uses randomly changing frequencies for stronger dizzying effects.

There is the standard Picatinny rail mount for quick mounting and compatible with firearms with universal Picatinny rails. Electronic reverse polarity protection ensures safe and stable use. Built-in ATR technology adjusts the NPL30's output based on working conditions and environment to maintain optimum performance. It has an ultralight weight of 130g (4.59oz) (including battery), IP66 waterproof and 1m impact resistant.

Led: 4x Cree XP-G3 - with a life cycle of 50,000 hours
Operating Modes: Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and press one of the power buttons three times for the STROBE mode, which uses frequencies that change randomly for stronger dizzying effects.
Powers and Durations: 1200 lumens (1.45h) Strobo 1200 lumes
Power peak: 3300 cd
Maximum illumination distance: 113m.
Ignition method: double switch, ambidextrous, placed on the sides of the flashlight
Light variation method: double switch, ambidextrous, placed on the sides of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: works with two CR123A batteries (included in the package)
Measurements: 8.1cm (Length) - 3.8cm (Width) - 3.5cm (thickness, sled included)
Weight: 130g. with battery inserted
Accessories: o-rings
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m. in height
Notes: Universal quick coupling slide, compatible with Picatinny and Weaver systems

KEY FEATURES

* It uses two main LEDs 1XCREE XP-G3 S3 (3000K) Spotlight (from depth) and 1xCREE XP-G3 S3 (5700K) Floodlight (ambient), usable individually or combined and two small central auxiliary red light LEDs.

Maximum output power 520 lumens with depth about 103 meters
* Polymer torch body
* The torch consists of a double parabola (front) which guarantees a double possibility of illumination;

Parabola CREE XP-G3 S3 (3000K) Spotlight with 3 levels: 520 lumnes - 400 lumens (6 hours) - 100 lumens (10 hours)
CREE XP-G3 S3 dish (5700K) Floodlight with 2 levels: 200 lumens (8 hours) - 55 lumens (13 hours)

Central red LEDs: 16 lumens (6 hours)

* Maximum light intensity of 4120 cd and maximum range of 128 meters
* Powered by both USB-C Nitecore HLB1300 Rechargeable Li-ion Battery (included), and 3 AAA batteries
* Double button on, off and adjustment
* Wide 90 ° lighting angle, specially designed for hiking and sporting activities
* Elastic front band included, light and breathable
* Electronic protection against battery polarity inversion
* Made of ABS
* Submersible as per IP66 specifications
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

Battery (included): Nitecore HLB1300 Rechargeable Li-ion Battery USB-C rechargeable battery
Torch dimensions: 54.9x398.6x28.3mm.
Weight: 82.5g (flashlight only, without batteries, headband and holder for front use)
Lens: micro-blasted hardened glass
Body: ABS
Notes: water resistant as per IP66 standard.
NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

WHY CHOOSE:
Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Light with strong spot - Integrated UV light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:
- Uses a Luminus SST-40-W LED with a maximum output power of 1,800 lumens
- UV light uses 4 x UV LEDs (320mW, 365nm wavelength)
- Glass and dishes with anti-reflective, crystal coating and PDOT treatments
- High-efficiency circuits to allow constant light for up to 50 hours continuously
- Dual rear power and selection buttons, quick and intuitive, designed for tactical applications
- STROBE READY technology that enables instant access to STROBO light
- STROBE light continuously varies randomly in frequency to increase disorientation effect
- Possibility to change the mode of use between Tactical Mode and Daily Mode
- Integrated charging system for Li-ion batteries via USB-C port
- NITECORE 21700 Li-ion battery included
- Impact-resistant silicon nitride front crown for excellent emergency glass-breaking capabilities
- Integrated ATR temperature control system
- Optical type lenses with anti-scratch coverage on both sides
- Made of anodized aircraft aluminum alloy with military grade HA III finish
- Waterproof as per IP68 standard (Submersible to 2 meters depth)
- Withstands impacts up to 2 meters high

Laboratory certified power and lifetime as per ANSI/NEMA FL1 standard using 1x 21700i 3.7V 4000mAh - under different usage conditions or using different batteries, data may vary

LED: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 3, electronically controlled + Strobe
Powers and Times: 1800 lumens (1h 45min.) -> 250 Lumens (8h 30min) -> 35 Lumens (38h) -> UV 320mW (30h) -> Strobe 1800 lumens
Peak power: 28500 candles
Maximum Lighting Distance: 337m
Ignition Method: Rear Button with "Momentary On" system for light signals and Rear Button "Mode" for immediate access to strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2140i, 4,000mAh - included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power.
Measurements: 15.0cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 124g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: thermoplastic, rigid, for quick deployment of the flashlight
Impact resistance: it resists falls from 1.5m height

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

WHY CHOOSE IT:

Tactical / military use - High luminous power - Very compact dimensions - Convenient integrated charging system - Light with strong spot - Practicality and immediacy of light selection commands. Thanks to Strobe Ready technology, just press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:

* Italian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head
* NITECORE 21700 rechargeable battery (NL2140i, 4,000mAh) included in the package
* Uses a Luminus SST-40-W LED for a maximum output power of 1800 lumens
* Maximum light intensity in the center point of 21100cd. and maximum range of 290 meters
* Glasses and parables with anti-reflective treatments, crystal coating and with PDOT (Precision Digital Optics Technology)
* Integrated potentiometer with indicator that indicates the residual charge and residual voltage of the battery
* Constructed from solid aircraft grade aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7V 3500mAh - in different conditions of use or using different batteries, the data may vary

Led: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 4, electronically regulated
Powers and Durations: 1800 lumens (1h 30min.) -> 280 Lumens (7h 15min) -> 35 Lumens (38h) -> Strobo 1800 lumens
Peak power: 21100 candles
Maximum illumination distance: 290m.
Ignition method: Rear button with "Momentary On" system for light signals and Rear "Mode" button to immediately access the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: Works with a rechargeable 21700 rechargeable battery (NL2140i, 4,000mAh) (included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power
Measurements: 14.7cm (L) - 2.54cm (D stem) - 2.54cm (D head)
Weight: 84g. batteries excluded
Accessories: wrist strap, NTH10 tactical polymer sheath, spare o-ring, clip
Water resistance: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Sheath: Tactical sheath compatible with molle bindings
Impact resistance: withstands drops from 1.5m in height

Italian Warranty Nitecore Italia: Torch guaranteed 5 years - Battery guaranteed 12 months

The first Nitecore flashlight that works with a powerbank and is controlled wirelessly via a wrist remote control!

KEY FEATURES:

• Adjustable and swiveling dual output headlamp for Spot and Flood light
• The Spot light uses 4 CREE LEDs with a maximum output of 1,600 lumens, an intensity of 6,570cd and a lighting distance of 162 meters
• The Flood light uses a CREE LED with wide angle illumination optics, up to 170 ° amplitude
• There are 10 adjustable and mixable Spot / Flood brightness levels
• Adjustable both directly on the torch and with a wireless remote control from the wrist
• 100 ° vertical tilt angle to meet different lighting needs
• Highly efficient constant current circuit provides stable light output
• Convenient USB-A socket, compatible with universal USB power sources
• ATR (Advanced Temperature Regulation) technology for temperature regulation
• Front band included, light and breathable
• Constructed from aircraft grade aluminum alloy
• Rugged HAIII military specification anodizing
• Resistant to water and dust as per IP67 standard
• Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

LED: 4x Cree XP-G3 S3 + 1x Cree E2 XHP35 HD with life cycle of 50,000 hours
Output 5 diffused light outputs and 5 deep light outputs, digitally adjusted, constant and mixable with each other as needed
Spot powers and durations: 5 lumens (45h.) -> 50 lumens (23h.) -> 200 lumens (9.30h.) -> 480 lumens (5h.) -> 1600 (4h.)
Flood powers and durations: 5 lumens (45h.) -> 50 lumens (21h.) -> 200 lumens (7.30h.) -> 480 lumens (4.30h.) -> 1200 (3h.)
Range: up to 162m.
Peak of power: 6570 candles
Usable batteries: powered by USB powerbank * (not included - sold separately) such as Nitecore F4 or Nitecore NB10000
Torch dimensions: 47.6x43.2x42.1 mm.
Weight: 142.5g (support and headband included, power supply not included)
Lens: hardened glass with anti-reflective treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Water resistance: water resistant as per IP67 standard
Included Accessories: 2x USB Clip - Front Band - Wireless Wrist Remote Control

Note: The data shown was measured in accordance with the international ANSI / PLATO FL 1-2019 lighting test standard using a 5,000mAh Power Bank under laboratory conditions. The data may vary slightly in actual use conditions due to the type of power supply used, usage habits and environmental factors.

* Nitecore recommends using power sources with an output of at least 18W and QC system, otherwise the TURBO level will not be available.

FREQUENT QUESTIONS:
Q: is the flashlight compatible with the battery pack of the Nitecore HC70 model?
A: It is compatible, but it stops at 480 lumens of expressed power.

Q: Is the flashlight compatible with the Nitecore F1 / F2 / F4 charger / powerbank?
A: It is compatible, but it stops at 480 lumens of expressed power.

Q: is the flashlight compatible with the Nitecore NB10000 powerbank?
A: Yes, it is perfectly compatible and can produce 1600 lumens of power.