Febbraio 2019
-
ExtremaRatio - Fulcrum Bayonet knife NFG Desert SW - knife
Model: Lightened version of the classic Fulcrum Bayonet, with shearder, stone washed blade, desert handle and desert nylon sheath.
Intended use: tactical / military / multi-role
Blade: full tang in stainless steel N690Co 58HRC
Handle: dismountable in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 378g.
Closure: -
Clip: -
Sheath: modular tactical with shear, thigh or belt, in Nylon and Kydex
Note: -ER-FBN-DE -
Maserin - B.A.C. Battle Ax Concept 954 / G10N - axe
B.A.C. Battle Axe Concept nasce come combat tomahawk pensato e realizzato sull'ergonomia della mano, ottimizzato per essere impiegato in condizioni estreme, grazie all'utilizzo dei migliori materiali. Può essere utilizzato per compiti diversi dal normale uso di una classica ascia tradizionale, con la sua forma particolare offre la capacità di taglio di un coltello; con la sua appendice posteriore uncinata offre un gancio per aggrapparsi e trattenere nei lavori o nel close quarter battle (CQB).
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: In acciaio D2 59/61HRC
Trattamento Lama: -
Manicatura: G10 nero
Larghezza lama: 220mm.
Spessore lama: 6mm.
Lunghezza totale: 340 mm
Peso: 865 gr
Fodero: Kydex con sistema M.O.L.L.E.
Confezione: scatola in cartone con loghi Maserin
Design: Design by Alessandro ZaninMA-954/G10N -
Ka-Bar - Jarosz Spear Point Flipper knife 7509 - titanium handle - knife
Destination of use: tactical
Blade: stainless steel AUS 8A
Handle: titanium
Blade length: 88mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 215mm.
balancing:
Weight: 124g.
Closing: frame lock
Opening: pinball
Clip: in steel
Sheath: Nylon
Design: by Jesse Jarosz
Production: TaiwanKB-7509 -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife
Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: CollectionType of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)The colors of the materials with which our handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.
50001 -
Tops - Rocky Mountain Spike - Sandstorm Bronze - knife
The Rocky Mountain Spike is the result of several months of testing and fine-tuning in the field. The original design was to flank or add a large knife, such as a TOPS Machete or Power Eagle, to offer the user a variety of other applications on smaller projects. The size and steel mass of large knives certainly have their place. However, every once in a while a situation arises where one wishes to have a smaller knife, and particularly one with a narrow blade.
After using and abusing the prototypes in the field, those who have tested the small Rocky Mountain have seen a wide variety of cutting, scraping, splitting, EDC, and separating tasks for which this tool can be used effectively.
We now believe that the Rocky Mountain Spike is an excellent stand-alone toolfor hikers, bikers, campers, boaters, weekend outdoor enthusiasts, and long trips. It can be worn on your belt or kept in your backpack, boot or any other convenient place. Whether it is for general outdoor activities, at work or at home, this is the tool for you.
Intended Use: Utility
Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Sandstorm Bronze
Handle: 1095 58/60HRC steel
Blade length: 8.9mm.
Blade thickness: 4.5mm.
Total length: 185mm.
Balance: on the guard branch
Weight: 70g.
Sheath: leather
Packaging: transparent plastic bag
Notes: emergency whistleTPRMS01 -
Tops - Mission Team 21 Fixed Knife - 1095 - MT-21 - knife
The Mission Team 21 is a no-nonsense tactical knife that can also easily carry out many activities in the field. The handle has been designed to remain in the operator's hand even in difficult situations thanks to the finger grooves, finger guard and jimping. If necessary, the knife can also be used in survival situations.
Created with the guidance of Bill Hill (Command Master Chief-Seal Team 3 retired with over 30 years of real-time experience), this design has produced a great field tool for any theater. Very nice aesthetically, feels good in the hand and always performs at its best.
Intended use: Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 150 mm.
Blade thickness: 6mm.
Total length: 300 mm.
Balancing: on the guard branch
Weight: 487g.
Sheath: in cordura
Packaging: Transparent plastic bag
Notes: Emergency whistleTOPS-MT-21 -
Cold Steel - Marauder Bowie - Plain StoneWashed - 39LSWBA - knife
Use: Sporting
Production Type: Industrial
Country of Production: Taiwan
Blade: stainless steel AUS-8A
Blade finishing: stonewashed
Handle: Kray-Ex kraton
Blade Length: 229mm.
Blade thickness: 4,7mm.
Total length: 359mm.
Balance: on guard branch
Weight: 352g.
Scabbard: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -CS39LSWBA -
Maserin - B.A.C. Battle Ax Concept 954 / G10 Green - ax
Type of production: Industrial
Country of production: Italy
Blade: Steel D2 59 / 61HRC
Blade treatment: -
Handle: G10 Green
Blade width: 220mm.
Blade thickness: 6mm.
Total length: 340 mm
Weight: 865 gr
Sheath: Kydex with M.O.L.L.E.
Packaging: cardboard box with Maserin logos
Design: Design by Alessandro ZaninMA-954/G10G -
Cold Steel - 1917 Frontier Bowie Knife 88CSAB - knife
Sturdy bowie knife with clip point blade made of steel with a high carbon content.
Employment: Sports / Collection
Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:CS88CSAB -
United - M48 Tactical War Hammer - UC3069 - Tomahawk
Type of production: Industrial
Country of production: China
Blade: stainless steel 2Cr13
Blade treatment: Black Oxide Coating
Handle: Nylon and Glass Fiber
Blade length: 98.5mm. (only sharp) 197mm (with hammer)
Blade thickness: 10mm. In the central point
Total length: 393mm
Weight: 860g.
Sheath: TPR blade cover (thermoplastic rubber)
Packaging: cardboard box with United Cutlery logos
Note: -UC3069 -
Consigli Scarperia - Calabrese in bovine R-CAC20 - knife
A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip50004 -
Consigli Scarperia - Napoletano in bovine R-NAC20 - knife
The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tipR-NAC20 -
Consigli Scarperia - Casertano in bovine R-CASC20 - knife
The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tipR-CASC20 -
Consigli Scarperia - Rasolino in bovine RAC-20 - Knife
Rasolino in bovine RAC-20 - Knife
The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.RAC-20 -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Vernante Horn horn ox - 20 cm - 50073 - knife
Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand2351 -
Conaz Consigli Scarperia - Zuava knife with Ox horn sundial - 50080 - knife
The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50080 -
Consigli Scarperia - Three Pianelle R-TPC20 - knife
Three Pianelle R-TPC20 - knife
Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle0261