Febbraio 2019

This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs

Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which brings back the Tanto profile blade with a bevel that enhances the excellent cutting qualities.

The rotation mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.

The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern way, the inlays of the classic Viper models.

The flat edges and the titanium clip allow for comfortable and discreet carry.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Italy
Blade: Super Dense Twist stainless Damascus
Blade finish: Satin
Handle: Dark matter carbon fiber
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 122g.
Lock: Liner Lock
Clip: Titanium
Packaging: Deluxe cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearing - Damascus SSCT spacer - limited edition of 100 pieces

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, featuring a Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.

The rotating mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.

The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern key, the inlays of the classic Viper models.

The flat edges and the titanium clip allow for comfortable and discreet carry.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60/61HRC
Blade finish: Stonewashed
Handle: Walnut
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 107g.
Lock: Liner Lock
Clip: Titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearing

The Mission Team 21 is a no-nonsense tactical knife that can also easily carry out many activities in the field. The handle has been designed to remain in the operator's hand even in difficult situations thanks to the finger grooves, finger guard and jimping. If necessary, the knife can also be used in survival situations.

Created with the guidance of Bill Hill (Command Master Chief-Seal Team 3 retired with over 30 years of real-time experience), this design has produced a great field tool for any theater. Very nice aesthetically, feels good in the hand and always performs at its best.

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 150 mm.
Blade thickness: 6mm.
Total length: 300 mm.
Balancing: on the guard branch
Weight: 487g.
Sheath: in cordura
Packaging: Transparent plastic bag
Notes: Emergency whistle

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 107g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

Gold Edition 2019 Benchmade - Special edition of the Griptilian limited to 200 pieces

Intended use: Collection

Blade: custom Damasteel Fjåril (Swedish for butterfly) Pattern
Country of production: USA
Handle: Gray / blue G10
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 205mm.
Weight: 118g.
Closure: Axis Lock
Clip: removable and reversible in stainless steel
Sheath: -
Packaging: cardboard box with Benchmade logos
Notes: Design by Mel Pardue

Type of production: handmade

Country of production: Italy
Blade: in steel D2 at 59 / 60HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.5mm.
Total length: 200mm.
Balancing: set back
Weight: 220g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Use: Sporting 

Production Type: Industrial
Country of Production: Taiwan
Blade: stainless steel AUS-8A
Blade finishing: stonewashed
Handle: Kray-Ex kraton
Blade Length: 229mm.
Blade thickness: 4,7mm.
Total length: 359mm.
Balance: on guard branch
Weight: 352g.
Scabbard: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 184 mm.
Blade thickness: 7.8mm.
Total length: 318 mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo Espinoza

The Operator 7 is huge! TOPS Knives went well with heavy steel and handles to make a hefty, well-balanced knife. It also has those classic American fighting knife aesthetics that make it look as good as it will perform.

Made out of 5/16 "thick 1075, the differentially heat-treated blade with a very strong thorn. The entire handle is also over 1 "thick once assembled to fill out the user's hand much like an ax or hatchet handle would.

Because it is a tool, it's got to be comfortable. It's made for the men that do not back down. This knife will find its place with door kickers, survivalists, and weekend warriors alike. The rounded handles and hand guards make it a joy to use and the finger choil allows the user great precision for finer cuts. The 6.5 "of cutting edge will help you get the work done." The included Kydex sheath with dangler attachment makes it easy to carry into whatever territory you find yourself.

Type of production: Industrial

Country of production: Italy
Blade: Steel D2 59 / 61HRC
Blade treatment: -
Handle: G10 Green
Blade width: 220mm.
Blade thickness: 6mm.
Total length: 340 mm
Weight: 865 gr
Sheath: Kydex with M.O.L.L.E.
Packaging: cardboard box with Maserin logos
Design: Design by Alessandro Zanin

Sturdy bowie knife with clip point blade made of steel with a high carbon content.

Employment: Sports / Collection

Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:

Intended use: neck / tactical / sports knife

Type of production: Industrial
Country of production: China
Blade: AUS-6 stainless steel
Blade treatment: Teflon coating
Handle: G10
Blade length: 73mm.
Blade thickness: 2.2mm.
Total length: 139mm.
Weight: 38g.
Sheath: ABS, with stainless steel clip for neck or belt
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson

Intended use: Sports / Tactical

Type of production: Industrial
Lama production: China
Blade: 8Cr14MoV stainless steel
Blade Treatment: Black Stone Washed
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 202mm.
Weight: 116g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: "Outburtst" rapid opening system

Intended use: Hard Utility / Survival

Type of production: industrial seeds
Country of production: USA
Blade: CPM-154CM stainless steel 58 / 60HRC with cryogenic treatment
Blade finish: tumbled
Handle: micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 273mm.
Balancing: coinciding with the lower guard branch
Weight: 931g.
Sheath: in thermoformed kydex with 360 ° rotating steel clips
Notes: Design by Tom Brown - used in the film The Hunted with Benicio Del Toro

Type of production: Industrial
Country of production: China
Blade: stainless steel 2Cr13
Blade treatment: Black Oxide Coating
Handle: Nylon and Glass Fiber
Blade length: 98.5mm. (only sharp) 197mm (with hammer)
Blade thickness: 10mm. In the central point
Total length: 393mm
Weight: 860g.
Sheath: TPR blade cover (thermoplastic rubber)
Packaging: cardboard box with United Cutlery logos
Note: -

Destination of use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Satin
Handle: Carbon Fiber
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 106mm.
Total length: 184mm.
Weight: 82g.
Locking system: Compression Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: opening by Carson Flipper system on ball bearings

Type of production: Artisan
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Handle: Micarta
Blade length: 225mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: set back
Weight: 686g.
Sheath: in leather
Package: -
Notes: GodFather model with bowie

A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tip

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

Rasolino in bovine RAC-20 - Knife

The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
  The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.

Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.

Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.

Type of production: artisan

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).

The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.

Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand

The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Three Pianelle R-TPC20 - knife

Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.

Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle