Gennaio 2016

The Opinel Mountain Legend collection is inspired by actual engravings shepherds made on Alpine shelter walls. Genuine "Heart" Boxwood handle gives this knife it's silky yellow finish.

Please note that the "lines / groves" on the wood handle of this Opinel Legends knife will darken with use and as a result become more noticeable.

Opinel No8 is the most versatile size in the ever growing line of Opinel folding knives. This knife is small enough to be used as a pocket knife and it's 3 1/4' blade prevent it to be considered a weapon in most states (check with your state).

Handle: Boxwood (the woods)
Blade: 12C27 MOD Sandvik Stainless Steel (the steels)
Size open: 7. 5/8"
Blade: 3. 1/4"
Weight: 1.8 oz
Packaging: Wooden Gift Box pictured above

Opinel - Collection Set 10 pieces - stainless steel blade - knife

Invented in 1890 and still today produced in Savoy, the pocket knife Opinel is famous worldwide.

Collection Set of 10 pieces 2-12

Type of production: Industrial
Production Lama France
Blade: stainless steel Sandvik 12C27
Blade treatment: Satin
Handle: Wood
Packaging: Wooden box with logos Opinel

Laguiole en Aubrac - buffalo horn insignia with hammer and blade sanmai - knife collection

Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: buffalo horn with insignia hammered
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Riproduzione del gladio romano del condottiero Giulio Cesare, prodotta dalla Marto di Toledo in una speciale tiratura limitata realizzata unicamente in 1500 esemplari.

Lama in acciaio inox 440, non affilata, con incisioni all'acquaforte sulla lama
Lunghezza totale cm 71
Peso di 1,9 kg

Accompagnata da supporto espositivo in legno, da parete

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1

Led: 1x Cree XP-G R5 con un ciclo vitale di 50.000 ore e con diametro di illuminazione di 100°
Modi Operativi: 3 potenze luminose, regolate digitalmente
Potenze e Durate: 45 Lumens (0.45h. ) -> 15 Lumen (1.45h.) -> 2 Lumens (21h.)
Picco di potenza: 230 candele
Distanza di illuminazione massima: 30m.
Metodo di accensione: Pulsante multifunzione
Metodo di selezione luminosa: Pulsante multifunzione
Corpo: policarbonato trasparente
Batterie: Li-Ion, inclusa, non rimovibile, dotata di sistema di ricarica integrato
Misure: 5.87cm (Lungh.) - 2.42cm (Largh,) - 0.5cm (Spess.)
Peso: 9.6g. - batteria inclusa
Accessori: doppio anello in acciaio per aggancio
Impermeabilità: come da standard IP65, resiste ad acqua e polvere
Resistenza agli impatti: resiste a cadute da 1.5m di altezza
Note: Comprensiva di fascia frontale multifunzione, con supporto girevole che permette di far ruotare la torcia di 360° in base alle proprie esigenze. La torcia può anche essere separata dalla fascia ed utilizzata come una normale torcia tascabile o può essere agganciata a tasche. Dotata di sistema di ricarica integrato tramite porta MicroUSB; in fase di ricarica, un LED integrato mostrerà lo status e si spegnerà automaticamente a ricarica completata. Il sistema di ricarica previene automaticamente il sottovoltaggio, il sovravvoltaggio ed ha una protezione integrata contro le cortocircuitazioni.

FUNZIONAMENTO

* Tenendo premuto il pulsante di accensione, la luce si imposta ad 1 Lumen di potenza, premendo leggermente la potenza sale a 15 Lumens, premendo nuovamente la luce sale a 45 Lumens.
* Tenendo nuovamente premuto il pulsante di accensione, la luce si spegne.

RICARICA

* Sollevare il gommino che protegge il pulg MicroUSB posto sul lato della torcia
* Inserire un cavo di ricarica di tipo MicroUSB (lo stesso utilizzato per ricaricare smartphone e dispositivi di tipo Android, facilmente reperibile)
* Il LED Rosso di carica si accenderà segnalandovi che la ricarica è cominciata
* A ricarica terminata, il LED Rosso si spegne ed i circuiti integrati terminano automaticamente la ricarica senza necessità che venga rimosso il cavo MicroUSB

CERTIFICAZIONI

* RoHS / C E

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Intended use: Sport / EDC
Type of production: industry
Blade: stainless steel with sharp 14C28N in CPM-D2
Blade treatment: -
Production Lama USA
Handle: G10
Blade length: 92mm.
Blade Thickness: 3mm.
Length closed: 125mm.
Overall length: 216mm.
Balancing: -
Weight: 165g.
Lock: Liner Lock
Clip: Removable stainless steel Teflon
Sheath: -
Notes: opening by flipper

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED