gentleman knives

gentleman knives, pocket knife, knife collection

Coin knife - Meiji Dragon Yen 1870-1914 - multipurpose with blade, scissor and file

Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.

Features:

coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel

History of the coin:

The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914

€53.28
Article code: BDYB37
- Add to Wishlist
- | Add to Compare
Frank Centofante - SL-11 - Mokume and Abalone # 012 - artisan knife

Intended use: Collection / Gentleman

Type of production: Artisan
Lama production: USA
Blade: stainless steel ATS34
Blade treatment: -
Handle: Mokume and Abalone
Blade length: 70mm
Blade thickness: 2.5mm.
Length closed: 86mm.
Total length: 158mm.
Thick when closed: 8mm.
Balancing: -
Weight: 90g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: soft sachet
Notes: rare artisan knife made by the famous American cutler, Frank Centofante, who recently passed away, serial number 012

€1,311.47
Article code: FC-012
- Add to Wishlist
- | Add to Compare
Mcusta - MC-192C Slip Joint Knife Black / Yellow - knife

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

€143.44
Article code: MC-192C
- Add to Wishlist
- | Add to Compare
Mcusta - MC-193C Slip Joint Knife Black / Green - knife

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

€143.44
Article code: MC-193C
- Add to Wishlist
- | Add to Compare

Mcusta - MC-191C Slip Joint Knife Black / Red Wood - knife

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

2 Review(s)

€143.44
Article code: MC-191C
- Add to Wishlist
- | Add to Compare
Benchmade - 318 Proper Slipjoint Clip Point - Green Micarta - Folding Knife

Purpose: EDC / Gentleman

Type of production: Industrial
Country of Origin: USA
Blade: Stainless Steel CPM-S30V 58 / 60HRC
Blade treatment: satin finish
Handle: micarta
Blade Length: 73mm.
Blade thickness: 2.3mm.
Closed length: 98mm.
Total Length: 170mm.
Closure thickness: 10mm
Balance: -
Weight: 66g.
Closure: SlipJoint
Clip: -
Sheath: -
Packing: Cardboard box with Benchmade logos
Notes: -

€110.65
Article code: BM-318
- Add to Wishlist
- | Add to Compare
Benchmade - 318-1 Proper Slipjoint Clip Point - Red G10 - folding knife

Purpose: EDC / Gentleman

Type of production: Industrial
Country of Origin: USA
Blade: Stainless Steel CPM-S30V 58 / 60HRC
Blade treatment: satin finish
Handle: G10
Blade Length: 73mm.
Blade thickness: 2.3mm.
Closed length: 98mm.
Total Length: 170mm.
Closure thickness: 10mm
Balance: -
Weight: 66g.
Closure: SlipJoint
Clip: -
Sheath: -
Packing: Cardboard box with Benchmade logos
Notes: -

€110.65
Article code: BM-318-1
- Add to Wishlist
- | Add to Compare
Benchmade - 319 Proper Slipjoint - Green Micarta - Knife

Purpose: EDC / Gentleman

Type of production: Industrial
Country of Origin: USA
Blade: Stainless Steel CPM-S30V 58 / 60HRC
Blade treatment: satin finish
Handle: micarta
Blade Length: 73mm.
Blade thickness: 2.3mm.
Closed length: 98mm.
Total Length: 170mm.
Closure thickness: 10mm
Balance: -
Weight: 66g.
Closure: SlipJoint
Clip: -
Sheath: -
Packing: Cardboard box with Benchmade logos
Notes: -

2 Review(s)

€110.65
Notify when available

Article code: BM-319
- Add to Wishlist
- | Add to Compare

Benchmade - 319-1 Proper Slipjoint - Red G10 - Knife

Purpose: EDC / Gentleman

Type of production: Industrial
Country of Origin: USA
Blade: Stainless Steel CPM-S30V 58 / 60HRC
Blade treatment: satin finish
Handle: G10
Blade Length: 73mm.
Blade thickness: 2.3mm.
Closed length: 98mm.
Total Length: 170mm.
Closure thickness: 10mm
Balance: -
Weight: 66g.
Closure: SlipJoint
Clip: -
Sheath: -
Packing: Cardboard box with Benchmade logos
Notes: -

€110.65
Article code: BM-319-1
- Add to Wishlist
- | Add to Compare
Case Cutlery - Trapper Yellow - CA00161 - Knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and ABS
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

€61.47
Notify when available

Article code: CA00161
- Add to Wishlist
- | Add to Compare
Benchmade - Megumi 482 Gentleman knife by Nakamur - Knife

Intended use: gentleman - collection - sports

Type of production: Industrial
Production Lama: U.S.A.
Blade: Tanto CPM-S30V Steel 58 / 60HRC
Blade treatment: -
Handle: cocobolo wood and carbon fiber
Blade length: 63mm.
Blade thickness: 2.5 mm.
Closed Length: 83mm.
Overall length: 145mm.
Thick when closed: 11mm.
Balancing: -
Weight: 52g.
Closure: Lock Nak
Clip: -
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: design by Seiichi Nakamura

€192.62
Discontinued - Fuori Produzione
Notify when available

Article code: BM-482
- Add to Wishlist
- | Add to Compare
Fox - Terzuola - Damascus and Bocote - FX-525DB - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Stainless Damascus Super Dense Twist 364 layers (ATS34 + PMC27)
Surface treatment: -
Handle material: wood bocote
Blade length: 8.9mm.
Blade thickness: 3mm.
Closed Length: 112mm.
Overall length: 200mm.
Thick when closed: 14.5mm
Weight: 98g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: cardboard box with Fox Knives logos
Notes: Design by Bob Terzuola

€213.11
available in about 10/15 days
Article code: 12509
- Add to Wishlist
- | Add to Compare

Brad Zinker - TLLF Mammoth Fossil Ivory - custom knife

Intended Use: Collection

Type of production: handmade
Country of Origin: USA
Blade: handmade by Rob Thomas, In Damascus steel 440C and CPM154 with Basketweave pattern
Blade treatment: -
Handle: fossil mammoth ivory with liners of titanium and damascus spacer
Blade length: 91mm.
Blade thickness: 2.5mm.
Closed Length: 115mm.
Overall length: 205mm.
Thick when closed: 11mm.
Weight: 56g.
Lock: liner lock
Clip: Titanium
Notes: Entirely handmade by Brad Zinker

€573.77
Notify when available

Article code: 12475
- Add to Wishlist
- | Add to Compare
Fallkniven - GP CoS Cocobolo - knife

Intended use: Hunting / Sports

Type of production: Semi-Craft
Production Blade: Japan
Blade: stainless steel laminate CoS
Treatment Lama: -
Handle: Cocobolo
Blade length: 78mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Total length: 180mm.
Thick when closed: 19mm.
Balance: -
Weight: 97g.
Lock: Liner Lock
Clip: -
Sheath: -
Packing: Wooden case
Notes: -

€270.49
Disponibile in 7/10 giorni
Article code: F-GPGM
- Add to Wishlist
- | Add to Compare
Max Salice Sanna - Wave - Steel SPG2 sanmai - craft knife

Craft knife produced by the famous Master cutler Italian Salice Max Sanna.

This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.

Intended Use: Collection / Gentleman

Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by Max

For more information you can view the site sull'accaio used: www.collinisteel.com

€590.16
Notify when available

Article code: max-wave
- Add to Wishlist
- | Add to Compare

Lion Steel - Opera Madreperla e Abalone by Max - 8800DMOP coltello

Lion Steel - Opera and Mother of Pearl Abalone by Max - 8800DMOP knife

Lion Steel - Opera and Mother of Pearl Abalone by Max - 8800DMOP knife


Intended Use : Collection / Gentleman

Type of production : Industrial
Production Lama : Italy
Blade : Stainless Damascus Heimskgringla
Blade treatment : -
Handle : White mother of pearl and Australian Abalone
Blade length : 73mm .
Blade thickness : 3mm .
Length closed : 100mm .
Overall length : 175mm .
Thick when closed: 12mm .
Balancing : -
Weight : 80g .
Closure: Back Lock
Clip: -
Sheath: -
Packaging: wooden and cardboard with logos Lion Steel
Notes : Design by Max

€295.08

Notify when available

Article code: 4330A

Case Cutlery - Trapper Image XX WWII - CA 5470 knife

Case Cutlery - Trapper Image XX WWII - CA 5470 knife

Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone with Scrimshaw
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

€63.93
Notify when available

Article code: 7192
- Add to Wishlist
- | Add to Compare
Case Cutlery - Trapper John Deere Green - 05862 knife

Case Cutlery - Trapper John Deere Green - 05862 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone Green
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green John Deere logos Houses
Notes: -

€61.47
Notify when available

Article code: 05862
- Add to Wishlist
- | Add to Compare
Case Cutlery - Mini Trapper Santa Fe 'Turquoise - craft knife

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

€139.34
Article code: mini-trapper
- Add to Wishlist
- | Add to Compare
Case Cutlery - Mini Trapper Santa Fe 'Turquoise - craft knife

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

€63.93
Notify when available

Article code: 05142
- Add to Wishlist
- | Add to Compare

Case Cutlery - Trapper Nacre 00640 - knife

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

2 Review(s)

€81.15
Notify when available

Article code: CA260
- Add to Wishlist
- | Add to Compare
Fallkniven - FH9MOP - Mother of Pearl - Coltello

Destinazione d'uso: sportivo

Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Giappone
Manicatura: Testine in acciaio inox 420J2 e madreperla con abalone
Lunghezza lama: 67mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 158mm.
Peso: 88g.
Chiusura: Lockback
Clip: -
Note: -

€401.64
Disponibile in 7/10 giorni
Article code: F-FH9MOP
- Add to Wishlist
- | Add to Compare
Fox - Terzuola - Ziricote Wood - FX-515W - knife

Intended use: Sports / collection

Type of production: Industrial
Country of production: Italy
Blade: N690 stainless steel
Handle material: wood ziricote
Blade length: 88mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 200mm.
Thick when closed: 14mm
Weight: 94g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Bob Terzuola

2 Review(s)

€98.36
Article code: FX-515W
- Add to Wishlist
- | Add to Compare
Spartan Blades - Nymph StoneWash Small Titanium Folder Knife

This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.

Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.

This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.

Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the Year

€221.31
Article code: SF2SWSW
- Add to Wishlist
- | Add to Compare

Lion Steel - T.R.E. Three Rapid Exchange - Carbon Fiber - TRE CF - Knife

* Opening on ball bearings with system IKBS
* Thumbstud and removable Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium
* Box wood with all accessories (Torx T6, T8, Thumb Stud, Flipper, Two screws addizioniali)

Intended Use: Sport / collection

type of production: Industrial
production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
treatment Lama: Satin
handle: Carbon Fiber
blade length: 74mm.
blade thickness: 3.5mm.
total length: 175mm.
Weight: 62g.
Closing: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Package: Box wood with accessories
Notes: design by Molletta - opening on ball bearings IKBS

2 Review(s)

€229.51
Notify when available

Article code: 12245
- Add to Wishlist
- | Add to Compare
Lion Steel - T.R.E. Three Rapid Exchange - G10 Black - Knife

* Opening on ball bearings with system IKBS
* Thumbstud and Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
Treatment Lama: Satin
Handle: Titanium and G10 Black
Blade length: 74mm.
Blade thickness: 3.5mm.
Overall length: 175mm.
Weight: 65g.
Closure: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Packaging: -
Notes: design by Peg - opening on ball bearings IKBS

2 Review(s)

€160.66
Notify when available

Article code: TRE-G10-B
- Add to Wishlist
- | Add to Compare
Lion Steel - T.R.E. Three Rapid Exchange - Titanium Grey - TRE BL - Knife

* Opening on ball bearings with system IKBS
* Thumbstud and removable Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium
* Box wood with all accessories (Torx T6, T8, Thumb Stud, Flipper, Two screws addizioniali)

Intended Use: Sport / collection

type of production: Industrial
production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
treatment Lama: Satin
manicatura: Titanium
blade length: 74mm.
blade thickness: 3.5mm.
total length: 175mm.
Weight: 74g.
Closing: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Package: Box wood with accessories
Notes: design by Molletta - opening on ball bearings IKBS

2 Review(s)

€229.51
Notify when available

Article code: 12244
- Add to Wishlist
- | Add to Compare
Lion Steel - T.R.E. Three Rapid Exchange - Titanium Grey - TRE GR - Knife

* Opening on ball bearings with system IKBS
* Thumbstud and removable Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium
* Box wood with all accessories (Torx T6, T8, Thumb Stud, Flipper, Two screws addizioniali)

Intended Use: Sport / collection

type of production: Industrial
production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
treatment Lama: Satin
manicatura: Titanium
blade length: 74mm.
blade thickness: 3.5mm.
total length: 175mm.
Weight: 74g.
Closing: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Package: Box wood with accessories
Notes: design by Molletta - opening on ball bearings IKBS

€229.51
Notify when available

Article code: TRE-GY
- Add to Wishlist
- | Add to Compare

Lion Steel - T.R.E. Three Rapid Exchange - G10 Green - Knife

* Opening on ball bearings with system IKBS
* Thumbstud and Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
Treatment Lama: Satin
Handle: Titanium and G10 Green
Blade length: 74mm.
Blade thickness: 3.5mm.
Overall length: 175mm.
Weight: 65g.
Closure: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Packaging: -
Notes: design by Peg - opening on ball bearings IKBS

1 Review(s)

€160.66
Notify when available

Article code: TRE-G10-G
- Add to Wishlist
- | Add to Compare
Lion Steel - T.R.E. Three Rapid Exchange - G10 Orange - Knife

* Opening on ball bearings with system IKBS
* Thumbstud and Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
Treatment Lama: Satin
Handle: Titanium and G10 Orange
Blade length: 74mm.
Blade thickness: 3.5mm.
Overall length: 175mm.
Weight: 65g.
Closure: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Packaging: -
Notes: design by Peg - opening on ball bearings IKBS

€160.66
Notify when available

Article code: TRE-G10-O
- Add to Wishlist
- | Add to Compare
Lion Steel - T.R.E. Three Rapid Exchange - G10 Orange - Knife

* Opening on ball bearings with system IKBS
* Thumbstud and Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
Treatment Lama: Satin
Handle: Titanium and G10 Orange
Blade length: 74mm.
Blade thickness: 3.5mm.
Overall length: 175mm.
Weight: 65g.
Closure: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Packaging: -
Notes: design by Peg - opening on ball bearings IKBS

€160.66
Notify when available

Article code: TRE-G10-P
- Add to Wishlist
- | Add to Compare
Maserin - Fly - Black G10 - Design by Atti - 383/G10N - knife

Intended Use: Sport / gentleman

Type of production: industrial
Production Blade: Italy
Blade: Stainless steel CPM-S35VN
Treatment Blade: satin finish
Handle: G10
Blade length: 85mm.
Blade Thickness: 2.5mm.
Closed Length: 115mm.
Overall length: 200mm.
Thick when closed: 10mm.
Balancing: -
Weight: 78g.
Lock: Liner Lock
Clip: -
Sheath: Nylon
Notes: Design by Attilio Morotti

€72.95
Notify when available

Article code: 10907
- Add to Wishlist
- | Add to Compare

Viper - Drop Cocobolo by Fabrizio "Silvester" Silvestrelli - 5700CB coltello

Destinazione d'uso: sportivo/gentleman

Tipo di produzione: industriale
Produzione Lama: Italia
Lama: in acciaio inox Sandvik 12C27
Trattamento Lama: -
Manicatura: in Cocobolo, con liners annegati in acciaio inox
Lunghezza lama: 49mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 75mm.
Spessore da chiuso: 12mm.
Lunghezza totale: 125mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: astuccio in pelle nera
Note: design by Fabrizio Silvestrelli

2 Review(s)

€67.21
Article code: 2648
- Add to Wishlist
- | Add to Compare
Mcusta - MC-0076D Folding Knife - Knife

Mcusta - MC-0076D Folding Knife - Knife

Intended Use: Sport / collection / gentlemen

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: Cocobolo bamboo design
Blade length: 65mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 58g.
Lock: Liner Lock
Clip: -
Sheath: fabric
Notes: -

€155.74
Notify when available

Article code: MC-0076D
- Add to Wishlist
- | Add to Compare
Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife

Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 167mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

1 Review(s)

€154.92
Notify when available

Article code: MC-0052D
- Add to Wishlist
- | Add to Compare
Maserin - Fly - Pau Santo - Design by Atti - 383/SA - knife

Intended Use: Sport / gentleman

Type of production: industrial
Production Blade: Italy
Blade: Stainless steel CPM-S35VN
Treatment Blade: satin finish
Handle: Wood, Pau Santo
Blade length: 85mm.
Blade Thickness: 2.5mm.
Closed Length: 115mm.
Overall length: 200mm.
Thick when closed: 10mm.
Balancing: -
Weight: 78g.
Lock: Liner Lock
Clip: -
Sheath: Nylon
Notes: Design by Attilio Morotti

€80.33
available in about 10/15 days
Article code: 10870
- Add to Wishlist
- | Add to Compare

Mcusta - Gentleman Folder Damascus Japan - MC-0078D - knife

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: wood
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Total length: 167mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

€154.92
Notify when available

Article code: MCU54D
- Add to Wishlist
- | Add to Compare
Mcusta - Gentleman Folder Damascus Japan - MCU79D - knife

Mcusta - Gentleman Folder Damascus Japan - MCU79D - knife

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: wood
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 167mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

2 Review(s)

€154.92
Article code: MC0079D
- Add to Wishlist
- | Add to Compare
Fallkniven - P3Gcfc - Carbon Fiber - knife

Fallkniven - P3Gcfc - Carbon Fiber - knife

Intended Use: Sports

Type of production: industrial
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade: -
Blade Production: Sweden
Handle: 420J2 Stainless Steel and Carbon Fiber
Blade length: 76mm.
Blade Thickness: 2.5mm.
Closed Length: 100mm.
Overall length: 180mm.
Balance: -
Weight: 67g.
Lock: Liner Lock
Clip: -
Sheath: Nylon
Notes: -

€303.28
Disponibile in 7/10 giorni
Article code: F-P3GCFC
- Add to Wishlist
- | Add to Compare
Max Salice Sanna - Goblin - Red Stamina - custom knife

Intended use: Collection / Gentleman

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel ATS34
Treatment Lama: -
Handle: Red Stamina
Blade length: 67mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Total length: 154mm.
Thick when closed: 13mm.
Balance: -
Weight: 55g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - handmade custom knife by Max

€311.48
Notify when available

Article code: max
- Add to Wishlist
- | Add to Compare

Maserin - Easy Nickel and Bocote by Attilio Morotti - 386/BO knife

Easy Line - Design by Attilio Morotti

Type of production: Industrial
Production Blade: Italy
Blade: AUS-8 stainless steel 58HRC
Treatment Lama: -
Handle: Nickel and Bocote
Blade length: 60mm.
Blade thickness:-mm.
Length closed:-mm.
Total length: 140mm.
Thick when closed:-mm.
Balance: -
Weight: g-.
Lock: Liner Lock
Clip: -
Sheath: Leather Envelope
Packaging: cardboard box with logos Maserin
Notes: Design by Attilio Morotti

1 Review(s)

€72.95
available in about 10/15 days
Article code: 5991AO
- Add to Wishlist
- | Add to Compare
Chris Reeve - Mnandi Elder Burl Inlay - knife

Intended use: Collection / Sports

Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium and Radica
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 91mm.
Total length: 156mm.
balance:
Weight: 40g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: Leather
Notes: Production certificate included: production date July 30, 2013 - Mnandi in Zulu means "very nice"

€442.62
Notify when available

Article code: 0019R
- Add to Wishlist
- | Add to Compare
Mcusta - MC-0074DR Folding Knife - Knife

Intended Use: Sport / collection / gentlemen

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: bamboo design cocobolo
Blade length: 65mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Total length: 164mm.
Balance: -
Weight: 58g.
Lock: Liner Lock
Clip: -
Sheath: fabric
Notes: -

2 Review(s)

€155.74
Article code: MC-0074DR
- Add to Wishlist
- | Add to Compare
Mcusta - Tsuchi Damasco Japan - MC-0034D - coltello

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: sportivo/collezione

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Lama: in acciaio SanMai con tagliente in inox VG-10 a 59/60HRC e guance esterne in damasco al nickel a 33 strati
Produzione Lama: Japan
Manicatura: acciaio damasco
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 95mm.
Lunghezza totale: 167mm.
Bilanciatura: -
Peso: 88g.
Chiusura: Liner Lock
Clip: -
Fodero: bag in tessuto
Note: -

€180.33
Notify when available

Article code: 3982
- Add to Wishlist
- | Add to Compare

Nilte - Quiete - Darkside Stone Wash - knife

COMFORTABLE TO WEAR !

The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.

PLEASURE OF USE

The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.

HIGH LIGHT

The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .

SCREW ANTI-SLIP

In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .

THE HOLE WITH WINGS WINGS PIVOT HOLE

This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .

CURVE LIFESAVER !

Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .

SAFETY FIRST !

The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .

THE NAME

The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.

Intended Use : Sport / EDC

Type of production : Industrial
Production Blade: Italy
Blade: Sandvik 14C28N stainless steel
Treatment Blade: Stone Wash
Handle: Black G10 on one side , black on the other
Blade length : 64mm .
Blade thickness : 3mm .
Closed Length : 103mm .
Overall length: 178mm .
Thick when closed: 12mm .
Balancing : the pin opening
Weight: 60g .
Closure: Pure Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Nilte , paracord , warranty
Notes: First Production Run built in only 10 copies

Regular Price: €295.08

Special Price €191.80
Article code: 7287D
- Add to Wishlist
- | Add to Compare
Fallkniven - GP CoS Cocobolo - knife

Intended use: Hunting / Sports

Type of production: Semi-Craft
Production Blade: Japan
Blade: stainless steel laminate CoS
Treatment Lama: -
Handle: Cocobolo
Blade length: 78mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Total length: 180mm.
Thick when closed: 19mm.
Balance: -
Weight: 97g.
Lock: Liner Lock
Clip: -
Sheath: -
Packing: Wooden case
Notes: -

1 Review(s)

€270.49
Disponibile in 7/10 giorni
Article code: F-GP
- Add to Wishlist
- | Add to Compare
Eickhorn - Zenith Gentleman - coltello

Piccolo gioiello realizzato dalla nota casa tedesca di coltelli militari Eckhorn - La particolare e precisa lavorazione di cesellatura fatta sulla manicatura in acciaio inox del coltello, produce gradevoli effetti di luce, rendendo lo stesso un bellissimo oggetto da impugnare e collezionare.

- Lama in acciaio 440 di cm 5
- Lunghezza totale cm 14,5
- Peso 80 grammi
- Confezione regalo

Regular Price: €163.11

Special Price €97.87
Article code: 2371
- Add to Wishlist
- | Add to Compare
Eickhorn - Slim Cut Fiberglass knife

Eickhorn - Slim Cut Fiberglass knife

Intended use: Sport
Type of production: Industrial
Blade Production: Germany
Blade: 440C stainless steel
Treatment Blade: -
Handle: aluminum with carbon fiber inserts
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 187mm.
Thick when closed: 1.3 cm
Balancing: -
Weight: 100g.
Lock: Liner Lock
Clip: Steel Sheath: -
Packing: Notes:

Regular Price: €89.34

Special Price €71.47
Article code: slimcut
- Add to Wishlist
- | Add to Compare

Maserin - Atti Ebano by Attilio Morotti - 388EB coltello

Destinazione d'uso: Gentlemen/Sportivo

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM S35VN 60HRC
Trattamento Lama: -
Manicatura: Alpaca e legno di Ebano
Lunghezza lama: 70mm.
Spessore lama: 3mm.
Lunghezza chiuso: 90mm.
Lunghezza totale: 160mm.
Spessore da chiuso: 10
Bilanciatura: -
Peso: 94g.
Chiusura: Liner Lock
Clip: -
Fodero: Bustina in cuoio
Confezione: Scatola di cartone con loghi Maserin
Note: Design by Attilio "Atti" Morotti

1 Review(s)

€80.33
available in about 10/15 days
Article code: 6003EB
- Add to Wishlist
- | Add to Compare
Viper - Drop Ulivo by Fabrizio "Silvester" Silvestrelli - 5700UL coltello

Destinazione d'uso: sportivo/gentleman

Tipo di produzione: industriale
Produzione Lama: Italia
Lama: in acciaio inox Sandvik 12C27
Trattamento Lama: -
Manicatura: in Ulivo, con liners annegati in acciaio inox
Lunghezza lama: 49mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 75mm.
Spessore da chiuso: 12mm.
Lunghezza totale: 125mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: astuccio in pelle nera
Note: design by Fabrizio Silvestrelli

€67.21
Article code: 2647
- Add to Wishlist
- | Add to Compare
Gilles - Laguiole - Etui Gentleman Ceinture damasco - coltello

Gilles - Laguiole - Corno di Montone lama damasco

Questi coltelli di alta qualità, sono realizzati artigianalmente secondo la tradizione della coltelleria francese di Thiers che assicura l'assenza di qualsiasi difetto di fabbricazione nell'ambito di un normale utilizzo.

Lama: in acciaio damasco forgiato a mano ottenuto dalla successione di forgia, piegatura e saldatura di diversi acciai che gli conferiscono questo aspetto e queste qualità uniche
Manicatura: un unico corno di montone
Lunghezza lama: 80 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 183 mm.
Peso: 122 g.
Chiusura: Back Lock
Fodero: in cuoio, realizzato a mano
Note: ogni coltello e' accompagnato da un certificato di garanzia con numerazione progressiva, il coltello viene fornito in una scatola regalo in legno.

€340.16
Notify when available

Article code: 2883
- Add to Wishlist
- | Add to Compare
Chris Reeve - Mnandi Bocote - coltello

Destinazione d'uso: Collezione/Sportivo

Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio e Bocote
Lunghezza lama: 70mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 156mm.
Bilanciatura:
Peso: 40g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: cuoio
Note: mnandi in zulu significa "molto bello"

€434.43
Notify when available

Article code: 0019
- Add to Wishlist
- | Add to Compare

Koji Hara - Gentleman Madreperla - coltello artigianale

Destinazione d'uso: Collezione/Gentleman

Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: In acciaio inox Cowry-Y
Trattamento Lama: -
Manicatura: Madreperla e acciaio inox 316
Lunghezza lama: 60mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 81mm.
Spessore da chiuso: 9mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: -
Note: Inserti in madreperla sul dorso del coltello - modello interamente realizzato a mano dal Maestro Koji Hara

€770.49
Notify when available

Article code: 9014
- Add to Wishlist
- | Add to Compare
Chris Reeve - Mnandi Gabon Ebony Inlay - coltello

Destinazione d'uso: Collezione/Sportivo

Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio ed Ebano
Lunghezza lama: 70mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 156mm.
Bilanciatura:
Peso: 40g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: cuoio
Note: Certificato di produzione incluso: data di produzione 23 luglio 2012 - mnandi in zulu significa "molto bello"

€434.43
Notify when available

Article code: 0019E
- Add to Wishlist
- | Add to Compare

Select Your Currency

click to see all the news products

Delivery Terms

Accepted payment methods

Visit our Forum
click for details

Our shop in Italy
click for details

Collini Cutlery Shop in Busto Arsizio - Italy

Our Catalogs
click to download our catalogs

Tactical Friends
click for details

Prodotti recensiti dai clienti

Fox - Terzuola - Ziricote Wood - FX-515W - knife

Review by Massimiliano

Rating:

Positivo.
Bel coltello. Ben realizzato. Semplice ed elegante.

Mcusta - MC-191C Slip Joint Knife Black / Red Wood - knife

Review by Massimiliano

Rating:

Positivo.
Prodotto arrivato celermente ed in ottime condizioni. Bellissimo coltello da

Mcusta - MC-191C Slip Joint Knife Black / Red Wood - knife

Review by Massimiliano

Rating:

Positivo.
Prodotto arrivato celermente ed in ottime condizioni. Bellissimo coltello da

Lion Steel - T.R.E. Three Rapid Exchange - G10 Black - Knife

Review by Bluesgun

Rating:

Lionsteel - T.R.E. Three Rapid Exchange - TRE GBK - G10 Black - Coltello.
Ottimo coltello per qualità dell'acciaio, estetica e praticità, anche se

Benchmade - 319 Proper Slipjoint - Green Micarta - Knife

Review by mauro

Rating:

classico ma moderno.
ottimo da tasca x le piccole mansioni di tutti i