gentleman knives
-
Viper - Drop Montone by Fabrizio "Silvester" Silvestrelli - V5700MO knife
Intended use: sportsman / gentleman
Type of production: industrial
Lama production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: ram horn, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio SilvestrelliV5700MO -
Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in like new condition
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: lacking certificate and packaging.
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
Country of production: Italy
Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
Blade length: 57mm.
Blade thickness: 3mm.
Total length: 136mm.
Weight: 57g.
Sheath: lizard skin knife pouch
Locking system: Liner Lock
Notes: knife withdrawn from private collectionAP-LF-CP -
Viper - Drop Knife - Partridge Feather by Silvestrelli - 5700INPN - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Overall in very good condition, no original box (will be delivered with an alternative Viper box, but it will not be its own) - Original sharpening, never used - First series, still in Sandvik steel (current production is in 1.4416 steel) - Checked and certified by our in-house laboratory.
Intended use: Collection/Sportsman/GentlemanType of production: industrial
Country of production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin finish
Handle: made of Resin, with real Partridge feathers inside and stainless steel liners
Blade length: 49mm.
Blade thickness: 3mm.
Length when closed: 75mm.
Thickness when closed: 12mm.
Total length: 125mm.
Weight: 68g.
Closure: Liner Lock
Clip: absent
Scabbard: absent
Notes: Drowned in resin, two elegant Partridge feathers find their place - design by Fabrizio "Sylvester" Silvestrelli - Knife withdrawn from private collectionV5700INPN -
Viper - Drop Tulipano by Fabrizio "Silvester" Silvestrelli - 5700TW knife
Intended use: sportsman / gentleman
Type of production: industrial
Lama production: Italy
Blade: Nitro-B stainless steel
Blade treatment: -
Handle: in tulip, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio Silvestrelli5700TW -
Andre De Villiers ADV - Mini Impi Slipjoint Knife - Abalone
Intended use: collection / sport
Type of production: semi-handmade
Country of production: South Africa
Blade: in steel N690Co
Blade treatment: Satin
Handle: in steel, with abalone inserts
Blade length: 52mm.
Blade thickness: 2.2mm.
Length closed: 72mm.
Total length: 124mm.
Thick when closed: 8.5mm.
Balancing: set back
Weight: 44g.
Opening: Nail Nick
Closure: Slipjoint
Clip: Absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-MI-A -
Spartan Blades - Nymph StoneWash Small Titanium Folder Knife
This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.
Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.
This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.
Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the YearSF2SWSW -
Citadel - Stavanger Green Grey Ray Skin - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: stingray leather
Blade length: about 50mm.
Blade thickness: approx 4mm.
Closed Length: about 82mm.
Total length: about 145m.
Thick when closed: about 15mm.
Balance: -
Weight: about 78g.
Lock: Liner lock
Clip: -
Sheath: sheath
package:
Notes: -10632 -
Eickhorn - Shell Gentleman - coltello
Piccolo gioiello realizzato dalla nota casa tedesca di coltelli militari Eckhorn - La particolare e precisa lavorazione di cesellatura fatta sulla manicatura in acciaio inox del coltello, produce gradevoli effetti di luce, rendendo lo stesso un bellissimo oggetto da impugnare e collezionare.
Lama in acciaio 440 di cm 5
- Lunghezza totale cm 14,5
- Peso 80 grammi
- Confezione regalo2372 -
Eickhorn - Zenith Gentleman - coltello
Piccolo gioiello realizzato dalla nota casa tedesca di coltelli militari Eckhorn - La particolare e precisa lavorazione di cesellatura fatta sulla manicatura in acciaio inox del coltello, produce gradevoli effetti di luce, rendendo lo stesso un bellissimo oggetto da impugnare e collezionare.
- Lama in acciaio 440 di cm 5
- Lunghezza totale cm 14,5
- Peso 80 grammi
- Confezione regalo2371 -
Viper - Drop Cocobolo by Fabrizio "Silvester" Silvestrelli - 5700CB coltello
Destinazione d'uso: sportivo/gentleman
Tipo di produzione: industriale
Produzione Lama: Italia
Lama: in acciaio inox Sandvik 12C27
Trattamento Lama: -
Manicatura: in Cocobolo, con liners annegati in acciaio inox
Lunghezza lama: 49mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 75mm.
Spessore da chiuso: 12mm.
Lunghezza totale: 125mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: astuccio in pelle nera
Note: design by Fabrizio Silvestrelli2648 -
Viper - Drop Ulivo by Fabrizio "Silvester" Silvestrelli - 5700UL coltello
Destinazione d'uso: sportivo/gentleman
Tipo di produzione: industriale
Produzione Lama: Italia
Lama: in acciaio inox Sandvik 12C27
Trattamento Lama: -
Manicatura: in Ulivo, con liners annegati in acciaio inox
Lunghezza lama: 49mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 75mm.
Spessore da chiuso: 12mm.
Lunghezza totale: 125mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: astuccio in pelle nera
Note: design by Fabrizio Silvestrelli2647