Giugno 2020
-
MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-3CM -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
Zero Tolerance - Flipper Frame Lock - Carbon Fiber - ZT0707 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lockZT0707 -
Viper - Berus 2 by T. Rumici - Marbled Carbon Fiber - VT4014FCR - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Marbled carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4014FCR -
Viper - Berus 1 by T. Rumici - Marbled Carbon Fiber - VT4012FCR - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Marbled carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4012FCR -
Zero Tolerance - ZT0235 - Jens Anso - Carbon Fiber SlipJoint - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens AnsoZT0235 -
Sog - S37 Seal 2000 knife - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.
The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.
The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.
Intended Use: Sporting/Collection
Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydexSOG-S37SEAL-CP -
Buck - Simonich Raven Legacy Knife 0895BKS - 2008 - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection. Produced in 2008, it was born from the collaboration between Buck and Simonich Knives. The result is a sturdy, yet handy full tang tactical knife.
Overall in excellent condition - Checked and certified by our in-house Coltelleria Collini laboratory, it comes complete with original box.Intended use: Sports / Collection
Type of production: Industrial
Production Lama: USA
Blade: Bos-hardened CPM S30V stainless steel
Handle: G10
Blade length: 125mm.
Blade thickness: 4mm.
Total length: 255mm.
Balancing: set back from the guard branch at about 40mm.
Weight: 230g. (317g. Including scabbard)
Sheath: in black Nylon
Packaging: Official cardboard box with Buck logos0895BKS-B-CP -
Viper - Berus 1 by T. Rumici - Carbon Fiber - VT4012FC - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4012FC -
Kershaw - Bareknuckle Carbon Fiber Flipper - M390 Sprint Run - 7777CFM390 - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: M390 stainless steel
Blade treatment: Blackwash
Handle: Carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 84g.
Closing: Sub FrameLock
Clip: Removable and multi-position, in Teflon coated stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Sprint Run Edition - Carson Flipper type opening system on KVT ball bearingsK7777CFM390 -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBC-0618 -
Boker - Magnum Collection 2020 - Limited Edition - 02MAG2020 - knife
Intended use: Collection / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel D2
Blade finish: sandblasted
Handle: G10
Blade length: 173mm.
Blade thickness: 5mm.
Total length: 324mm.
Weight: 459g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Limited and numbered edition of 1999 copies - Design by Dietmar Pohl (Pohl Force)BO-02MAG2020 -
Mcusta - Yatagarasu collection knife - Limited Edition - MCSY-001 - knife
Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.
Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.Intended use: collection
Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 piecesFor more information on the steel used you can view the site: www.collinisteel.com
MCSY-001 -
Mcusta - Bamboo knife black pakka wood - SPG2 Powder Steel - MC-0146G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
Intended use: dirty / collection
Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0146G -
Spyderco - Centofante 3 knife - PRIVATE COLLECTION - C66PBK3 - knife
Knife taken from a private collection - Like new condition - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: VG10 stainless steel
Blade treatment: -
Handle: Glass fiber reinforced with Nylon (FRNR)
Blade length: 79mm.
Blade thickness: 2mm.
Length closed 114mm.
Total length: 192mm.
Balancing: -
Weight: 71g.
Closing: Back Lock
Clip: removable, stainless steel
Sheath: -
Packaging:
Note: -SP-C66PBK3