japan Knife

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fascinating knife used by the Japanese farmer "Higonokami kanekoma."

As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.

The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.

Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.

Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.

Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specifications

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

The Nomad is a classic Al Mar knife designed by Kirk Rexroat and no longer in production for years. It's a tactical folding knife with textured black G-10 handles on a stainless steel frame with a liner lock. The blade is made of VG-10 stainless steel with a flat grind and smooth edge.

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously Purchased - knife no longer in production
Condition: in like-new condition
Commercial availability: difficult to find
Sharpness: factory sharpness
Blade marks: free of marks
Handle marks: free of marks
Box: original Al-Mar box
Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house Coltelleria Collini laboratory
Product Description

Intended Use: Sporting/Collectible
Production Type: Industrial
Blade: VG10 stainless steel
Handle: G-10
Blade Length: 95mm.
Blade Thickness: 70mm.
Closed Length: 110mm.
Overall Length: 185mm.
Balance:
Weight: 97g.
Lock: Liner Lock
Clip: stainless steel

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening

Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishing
Country of production: Seki - Japan
Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
Handle: made of Mokume stainless damask steel and wood briar
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 208g.
Closure: Liner Lock
Clip: handcrafted, removable and reversible, hammered stainless steel
Packaging: wooden box with Mcusta logos
Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022

Knife collected from a private collection in like new condition with original box - Knife made in 2017 by the famous Japanese knifemaker Takeshi Saji - The knife is supplied together with the sheath made by Saji, with an additional sheath made by the Italian cutler Simone Tonolli. This second sheath allows horizontal attachment to the belt. Checked and certified by our internal laboratory.

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.

Intended use: Collection / Sports

Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, Yoshoku laminated damask with Hitachi Aogami cutting edge at 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closure: -
Clip: -
Sheath: two leather sheaths, one produced by Takeshi Saji for vertical positioning and one made by the Italian knifemaker Simone Tonolli for horizontal fixing
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.

Intended use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami cutting edge
Blade treatment: -
Handle: Paracord Green
Blade length: 205mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: ** LEATHER **
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Maestro.

Intended use: table / sports / collection
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damascus with 15-layer SPG2 steel edge
Handle: in black G10
Blade length: 100mm.
Blade thickness: 2.5mm.
Total length: 240mm.
Weight: 80g.
Packaging: Cardboard box and leather sheath
Notes: The knife is handmade by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Maestro.

Intended use: sports / collection
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damascus with 15-layer SPG2 steel edge
Handle: in black G10
Blade length: 110mm.
Blade thickness: 2.5mm.
Total length: 235mm.
Weight: 120g.
Packaging: Cardboard box
Notes: The knife is handmade by Takeshi Saj

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Multi-purpose vegetable and fruit knife. Thanks to the wooden case (shirasaya), similar to the one used for the katana or the tanto, the blade remains perfectly protected and easily transportable.

Intended use: Sports / Collection

Blade: 420J2 steel
Japan blade production
Handle: cherry wood
Blade length: 105mm.
Blade thickness: 1mm.
Total length: 210mm.
Balancing: -
Weight: 36g.
Sheath: cherry wood sheath
Note:

Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

Checked and certified by our internal laboratory - Collini Cutlery.

The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.

Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 pieces

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Charming knife used by the Japanese farmer.

As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.

The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.

It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.

Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Iron Wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Corian
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leather

Intended use: sporting/collection

Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheath

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019

Traditional Japanese carving knife "Kogatana" used in gardening, as a knife from the innseto or even for a walk and with a sharp blade only on one side. Thanks to the wooden case (shirasaya), similar to that used for the katana or for the time being, the blade remains perfectly protected and easily transportable.

Intended use: Sports / Collection

Blade: SK5 carbon steel
Lama Japan production
Handle: cherry wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 165mm.
Balancing: -
Weight: 44g.
Sheath: cherry wood sheath
Note:

Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.

Uso previsto: Colección / Deportes

Tipo de producción: Artesano
Producción de Lama: Japón
Hoja: acero inoxidable SanMai SPG2 con 67 capas - 63/64 HRC
Tratamiento con cuchilla: -
Manija: Lona negra Micarta
Longitud de la hoja: 95 mm.
Espesor de la hoja: 3.9mm.
Longitud cerrada: -
Longitud total: 200 mm.
Espesor cuando está cerrado: -
Equilibrio: -
Peso: 132 g.
Cierre: -
Clip: -
Funda: en Kydex con ataque Tek-Lok
Paquete: -
Notas: En 2007, Kiku Matsuda ganó el prestigioso Blade Show "Cuchillo del año" con un proyecto creado en colaboración con SOG.

Intended use: Collection / Gentleman

Type of production: Artisan
Lama production: Japan
Blade: Cowry-Y stainless steel
Blade treatment: -
Handle: Mother of Pearl
Blade length: 87mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 195mm.
Thick when closed: 11mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: -
Sheath: -
Package: -
Notes: model entirely handmade by Master Koji Hara

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Purpose: Collection / Sportsman

Type of production: craftsmanship
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Sakura (cherry wood)
Blade Length: 155mm.
Blade thickness: 5mm.
Closed length: -
Total length: 290mm.
Closure thickness: -
Balance: -
Weight: 248g.
Closure: -
Clip: -
Sheath: Leather and Sakura (cherry wood)
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Purpose of use: Collection / Sportsman / Machete

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Wood covered with leather strip
Blade Length: 175mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 315mm.
Closure thickness: -
Balance: -
Weight: 98g.
Closure: -
Clip: -
Sheath: Leather treated
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Purpose of use: Collection / Sportsman / Machete

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade Length: 125mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 245mm.
Closure thickness: -
Balance: -
Weight: 205g.
Closure: -
Clip: -
Sheath: IN LEATHER
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Intended use: Sports / Collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: sanmai sharp stainless steel with VG-10 59 / 60HRC and External cheeks damask nickel to 33 layers
Blade treatment: -
Handle: Corian
Blade length: 87mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 98g.
Lock: Liner Lock
Clip: Steel
Sheath: -
Notes: -

Intended use: key chain / collection

Type of Industrial Production
Blade: stainless steel 420
Production Country: Japan
Handle: Steel plated gold and Chinese lacquer red cinnabar
Blade length: 37mm.
Blade Thickness: 1.5mm.
Overall length: 91mm.
Closed Length: 54mm.
Closing system: -
Weight: 36g.
Chain and key ring: Brass
Packaging: in brown velvet box with logos Kai Cutlery
Notes: very rare product in the late '70s, brand new, in perfect condition

Intended use: hunting / sport

Type of production: Industrial seeds
Blade: ATS-34 stainless steel
Country of production: Seki - Japan
Handle: solid aluminum, with rubber inserts
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 172mm.
Closed Length: 98mm.
Locking system: back lock
Weight: 110g.
Sheath: nylon and leather
Packaging: cardboard box with logos G.Sakai
Notes: Knife of the early 90s, brand new, mint conditions

Intended use: hunting / collection

Production Type Semi-Handmade
Blade: ATS-34 stainless steel
Country of production: Seki - Japan
Handle: micarta with brown heads in brushed stainless steel
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 180mm.
Closed Length: 107mm.
Locking system: back lock
Weight: 66g.
Sheath: nylon and leather
Packaging: cardboard box with logos G.Sakai
Notes: Knife of the late '90s, new, in excellent condition

Intended use: hunting / sport

Type of production Semi-Industrial
Blade: SRS-15 semi-carbon steel 63 / 64HRC
Country of production: Seki City - Japan
Handle: micarta brown with loop guard and brass rivets
Blade length: 237mm.
Blade thickness: 6mm.
Overall length: 378mm.
Weight: 464g.
Sheath: Brown leather
Packaging: cardboard box with G. Sakai logos
Notes: Knife of the late '90s, brand new, mint conditions

Takeshi Saji - Miyabi Shikarigata knife - Knife custom

Intended Use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Hand Forged, damask laminated with sharp Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Sakura (cherry wood)
Blade length: 115mm.
Blade thickness: 4mm.
Closed Length: -
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 160g.
Closed: -
Clip: -
Sheath: Leather and Sakura (cherry wood)
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji

Intended use: hunting / collection

Production Type Semi-Handmade
Blade: stainless steel M.V.S. 8 (AUS-8)
Country of production: Japan Seki
Handle: wood and leather rings, with knob and guard in mirror polished alpaca
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 210mm.
Weight: 172g.
Sheath: leather, hand-stitched
Packaging: cardboard box with Hiro logos
Notes: Knife in 1992, again, in perfect condition

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length : 235mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 390mm .
Thick when closed: -
Balancing : -
Weight: 465g .
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.

Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.

Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate

Hikari Japan - Higo Folder Black knife - HK105 SD2 - knife

production: Japanese semi-industrial
Blade: carbon steel D2
Handle: steel and G10
Closing: liner lock
Length closed: 110mm.
Blade length: 94mm.
Blade thickness: 4mm
Overall length: 215mm
Weight: 162g.
Notes: -
Packaging: cardboard

Takeshi Saji - Bat 150 - Knife Craft

Intended Use: Collection / Sports

Type of production: Artisan
Production Lama: Japan
Blade: Forged by hand, damask laminate with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: black micarta
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: -
Overall length: 290mm.
Thick when closed: -
Balancing: -
Weight: 406g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji