Knife - Essential Tool for Camping, Outdoor Adventure and collection

Intended use: Sporting

Production type: Industrial
Country of production: Italy
Blade: Elmax steel at 61HRC
Blade finish: Satin finish
Handle: Stainless steel and Fat Carbon with gold highlights
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 160mm.
Weight: 110g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Design by Bruno Bruna "Graciut"

Intended use: collectible / sporting

Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade treatment:
Handle: In titanium and Fat Carbon with gold highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.

A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.

Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.


Intended use: sub/sporting

Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

With an unmistakable and timeless design, Hunter Pro Alox Limited Edition 2023 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Electric Yellow coloring, it conveys a powerful burst of energy! With embossed and anodized aluminum cheeks, it's a really tough knife.




Intended Use: Sporty

Type of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum 
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2023

The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made from a single piece of folded metal, but from flat plates in steel with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. In this version it is equipped with a frame lock. With lanyard hole.

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: in steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 60g.
Clip: -
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Note: -

The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made of a single piece of folded metal, but of flat plates made of brass with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. It opens with two hands and does not lock. With lanyard hole.

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: brass
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 71g.
Clip: -
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: -

Intended use: tactical

Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: Collection / Keychain

Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved blade

Intended use: Collection / Keychain

Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved blade

Intended use: Collection / Keychain

Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved blade

Intended use: Collection / Keychain

Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved blade

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: rescue / emergency

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Stonewashed
Grip: steel folders, G10 grips sensitive to UV rays
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branch

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS

Intended Use: Housework / Electrician / Hobbies

Type of production: Industrial
Production Blade: France
Blade: Sandvik 12C27 stainless steel
Treatment Blade: -
Handle: Polyamide reinforced with glass fiber
Blade length: 95mm.
Blade thickness: 2.2mm.
Length closed: -
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 68g.
Closure: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard Box
Notes: cable stripper, cutter, flat screwdriver 4mm, Phillips screwdriver Giragrilli 3.5/5mm, Magnet rear to hold the tips of the screwdriver in position

Intended Use: Mushroom Knife

Blade: Stainless steel 420
Handle material: Plastic
Blade length: 70mm.
Blade Thickness: 1.5mm.
Closed Length: 110mm.
Total length: 180mm.
Balance: -
Weight: 48g.
Closure: -
Clip: -
Sheath: -
Notes: Nylon brush