Knife - Essential Tool for Camping, Outdoor Adventure and collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Early 2000s knife, previously purchased.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in Kydex sheath.
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: MidTech
Country of Production: USA
Blade: full tang stainless steel CPM-S30V
Finish: Tiger Stripe
Handle: Paracord
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 195mm.
Weight: 125g.
Sheath: thermoformed kydex, with Tek-Lok multi-position attachment
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like New
* Commercially available 2018 Exemplar; currently offering other variants in other configurations.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: collectible/sporting/military

Production type: Midtech
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade treatment: blackwash
Handle: integral, machined titanium from solid, blackwash finish
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thickness when closed: 16mm.
Weight: 191g.
Opening: Carson Flipper type, on ball bearings
Closure: FrameLock
Clip: titanium, machined from billet
Packaging: plastic case with ADV Tactical logos
Notes: entirely designed and built by Andre De Villiers in his own workshop

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the design of the Spartan-Harsey Nessmuk is based on a classic American concept popularized by George Washington Sears (1821-1890) and the more moderate ergonomic designs of William W. Harsey Jr.

Under the guidance of a Native American from the Narragansett tribe named Nessmuk, George Washington Sears embraced the natural world, learning survival skills. Sears adopted "Nessmuk," meaning "wood duck," as his pseudonym, reflecting his love for forest life. Writing as "Nessmuk," he contributed to Forest and Stream magazine in the 1880s, promoting canoeing, the Adirondack lakes, and environmentalism.

Sears' diverse experiences led to his writings on the wonders of nature and conservation. He advocated minimalism: lighting fires, setting up tents, and more. He emphasized respect for nature, leading to a call for conservation.

Sears authored "Woodcraft" (1884), offering practical advice and introspection. The "Log of the Bucktail" series and poetry followed. Illness couldn't weaken his love for nature. He passed away in 1890, with Nessmuk's legacy enduring in Wellsboro.

A supporter of thin and sharp knives, Sears' ideals are reflected in our Nessmuk design.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 130mm
Blade Thickness: 4.8mm
Overall Length: 254mm
Weight: 308g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.

The M-PAT was created by U.S. military service member Seth Brown and was designed specifically for fighter jet crews. Its slim profile and sturdy size are designed it specifically so that it can be carried on the safety vest or otherwise at the top of the torso in order to cause as little discomfort as possible while in the flight deck. It is ideal for vertical carrying and, thanks to the two retention modes of the sheath, it will not go anywhere until you need it. The M-PAT's applications extend outside the cockpit and it is perfectly suited to a belt or tactical vest. It is always handy when you need it and out of the way when you don't. When you only have room for one knife for self-defense and survival, there's the M-PAT.


Intended Use: Tactical/Military

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Coyote Tan Coating
Handle: Canvas Micarta
Blade Length: 124mm.
Blade thickness: 4.8mm.
Total Length: 248mm.
Balance: on the guard branch
Weight: 309g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Seth Brown

The Rocky Mountain Spike is the result of several months of testing and fine-tuning in the field. The original design was to flank or add a large knife, such as a TOPS Machete or Power Eagle, to offer the user a variety of other applications on smaller projects. The size and steel mass of large knives certainly have their place. However, every once in a while a situation arises where one wishes to have a smaller knife, and particularly one with a narrow blade.

After using and abusing the prototypes in the field, those who have tested the small Rocky Mountain have seen a wide variety of cutting, scraping, splitting, EDC, and separating tasks for which this tool can be used effectively.

We now believe that the Rocky Mountain Spike is an excellent stand-alone toolfor hikers, bikers, campers, boaters, weekend outdoor enthusiasts, and long trips. It can be worn on your belt or kept in your backpack, boot or any other convenient place. Whether it is for general outdoor activities, at work or at home, this is the tool for you.

Intended Use: Utility

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Sandstorm Bronze
Handle: 1095 58/60HRC steel
Blade length: 8.9mm.
Blade thickness: 4.5mm.
Total length: 185mm.
Balance: on the guard branch
Weight: 70g.
Sheath: leather
Packaging: transparent plastic bag
Notes: emergency whistle 

Intended Use: Tactical / Military

Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1075 carbon steel
Blade treatment: powder coating
Handle: kraton
Blade length: 178mm.
Blade thickness: 4.5mm.
Total length: 308mm. 
Balancing: advanced
Weight: 286g.
Scabbard: Belt, nylon, for vertical carrying.
Package: Cardboard box with OKC logos
Notes: -

The Fieldcraft Knife was designed by The Brothers of Bushcraft, a group of nature activity enthusiasts. From tracking, to building shelters, the Brothers of Bushcraft are committed to training and educating people of all ages and genders to the passion of bushcraft.

The Fieldcraft Knife is the result of their knowledge and experience gained in the field; through experiences in the vast and humid rainforests, the arid and scorpion-strewn deserts and the freezing northern lands that span the Americas.

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Ston wash and Satin
Handle: Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Thick when closed: -
Weight: 274g.
Sheath: in Kydex with 360 ° rotatable metal belt clip and flintlock included
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

The Fieldcraft Knife was designed by The Brothers of Bushcraft, a group of nature activity enthusiasts. From tracking, to building shelters, the Brothers of Bushcraft are committed to training and educating people of all ages and genders to the passion of bushcraft.

The Fieldcraft Knife is the result of their knowledge and experience gained in the field; through experiences in the vast and humid rainforests, the arid and scorpion-strewn deserts and the freezing northern lands that span the Americas.

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: G10
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Thick when closed: -
Weight: 278g.
Sheath: in Kydex with 360 ° rotatable metal belt clip and flintlock included
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: Micarta
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thick when closed: -
Weight: 191g.
Sheath: in Kydex with 360 ° rotatable metal belt clip
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Intended use: Tactical / EDC

Type of production: semi artisanal
Country of production: USA
Blade: CPM-S35V steel
Blade treatment: Black PVD
Handle: anodized titanium with a thickness of 3.5mm per folder
Blade length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total length: 170mm.
Thick when closed: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: Ambidextrous thumbstood on the blade
Washers: in brass
Closure: Framelock
Clip: in titanium, removable
Packaging: tactical case in polymer with Medford logos
Notes: Skull Crasher on Shank - Designed and built by Greg Medford

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel laminated with cutting edge in VG-10
Blade treatment: satin finish
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 249g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos
Notes: new production 2018

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: Satin finish
Handle: Stag with steel guard and aluminum knob
Blade length: 177mm.
Blade thickness: 4.5mm.
Total length: 305mm.
Balancing: advanced
Weight: 274g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -

Intended use: sports / collection / hunting

Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box

Intended use: Collection / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: mirror polishing
Handle: in micarta, with stainless steel guard
Blade length: 220mm.
Blade thickness: 4.6mm.
Total length: 350mm.
Weight: 408g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfibre cloth for cleaning
Notes: Limited edition of 1999 numbered copies

Intended use: Tactical / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN 61 / 62HRC stainless steel
Blade treatment: stonewashed
Handle: titanium and G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Total length: 234mm.
Weight: 220g.
Closure: FrameLock
Clip: titanium, removable
Notes: custom version with screws and accessories in anodized bronze titanium

Additions compared to the standard model:
* Pivot screw in bronzed titanium
* 3 front screws in bronzed titanium
* 3 spacers in bronzed titanium
* Rear stabilizer lockbar in bronzed titanium
* Clip in bronzed titanium
* Clip cover in bronzed titanium

Intended use: Hiking / Sports / Survival

Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 60 / 61HRC stainless steel
Blade finish: Satin finish
Handle: Black Canvas Micarta
Blade length: 115mm.
Blade thickness: 4.5mm.
Total length: 235mm.
Balancing: on the guard branch
Weight: 189g.
Sheath: in thermoformed Kydex
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manual

Intended use: collection / sport / military

Type of production: artisan
Country of production: South Africa
Blade: stainless steel N690Co
Blade treatment: dual tone satin
Handle: titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Length closed: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balancing: 2cm back from the guard branch
Weight: 212g.
Opening: Flipper type on ball bearings
Closure: FrameLock
Clip: titanium anodized, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection / sports / military

Type of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Black
Handle: Black titanium
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Steel Sleipner 60 / 61HRC
Blade treatment: Black PVD
Handle: Aluminum
Blade Length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Closed thickness: 9mm.
Weight: 146g.
Closure: Frame Lock with Steel Swing and Rotoblock Security System
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: collection / sport / military

Type of production: artisan
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: satin
Handle: titanium and G10
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thick when closed: 14mm.
Balancing: on the guard branch
Weight: 168g.
Opening: Carson Flipper type, on ball bearings
Closing: FrameLock with additional cursor lock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection / sports / military

Type of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Satin
Handle: Dual Tone titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:

* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.

* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.

As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 130g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guard

Intended use: collection / sport

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: in micarta, with stainless steel guard
Blade length: 178mm.
Blade thickness: 4.6mm.
Total length: 305mm.
Weight: 295g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition of 1999 copies - Design by John H. Davis

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 248mm.
Balancing: Set back
Weight: 270g.
Sheath: kydex, with vertical belt attachment
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo Espinoza

Purpose: collection / sport / military

Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: black stonewash
Handle: Titanium stonewash
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 222g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Purpose: collection / sport / military

Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: black
Handle: green titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Purpose: collection / sport / military

Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: black
Handle: black titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Purpose: collection / sport

Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade Treatment: Sandblasted
Handle: Titanium Desert
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 223mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 216g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: Tactical / EDC

Type of production: artisanal seed
Country of Origin: USA
Blade: D2 steel
Blade Treatment: Black PVD
Handle: Anodized titanium
Blade Length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total Length: 170mm.
Closed thickness: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: thumbstood ambidextrous on the blade
Washers: Brass
Closure: Framelock
Clip: Titanium, Removable
Packing: Tactical Polycarbonate Case with Medford logos
Notes: Skull Crasher on the Tail - Designed and built by Greg Medford - Free Comic Book

Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.

Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: G10
Blade Length: 135mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Weight: 186g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG Knives

Type of production: Industrial
Production Country: USA
Blade: 440C Stainless Steel
Blade Treatment: Black Traction Coating
Handle: 440C stainless steel
Blade length: 82mm.
Blade thickness: 4.5mm.
Overall length: 184mm.
Weight: 52g.
Sheath: ABS, clip-on
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Steel Sleipner 60 / 61HRC
Blade treatment: Black PVD
Handle: Aluminum
Blade Length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Closed thickness: 9mm.
Weight: 146g.
Closure: Frame Lock with Steel Swing and Rotoblock Security System
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Steel Sleipner 60 / 61HRC
Blade treatment: Satin
Manicure: Aluminum
Blade Length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Closed thickness: 9mm.
Weight: 146g.
Closure: Frame Lock with Steel Swing and Rotoblock Security System
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sportsman / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Steel Sleipner 60 / 61HRC
Blade treatment: Satin
Manicure: Aluminum
Blade Length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Closed thickness: 9mm.
Weight: 146g.
Closure: Frame Lock with Steel Swing and Rotoblock Security System
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Italy
Blade: Stainless Sleipner 60 / 61HRC
Blade treatment: Satin
Handle: Titanium 6Al4V monolithic
Blade length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Thick when closed: 9mm.
Weight: 187g.
Lock: Frame Lock with steel casement and security system Rotoblock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with leather belt sheath
Notes: Opening system Carson Flipper on ball bearings

Cutlery Collini is an authorized dealer of products knives Rick Hinderer

Use: Tactical / Collection

Type of production: semi-custom
Production Country: USA
Blade: Spear Point CPM-S35VN Stainless Steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: titanium and brown G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Overall length: 234mm.
Weight: 220g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -

Cutlery Collini is an authorized dealer of products knives Rick Hinderer

Use: Tactical / Collection

Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 89mm.
Blade thickness: 4.5 mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 164g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -

Intended use: Sports

Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 80mm.
Blade thickness: 4.8mm.
Closed Length: 121mm.
Overall length: 150mm.
Weight: 196g.
Closing: Framelock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes

Intended use: Tactical / Military

Production: Taiwan
Blade: AUS-8 stainless steel 57/58 HRC
Handle: Zytel
Blade length: 125mm.
Blade thickness: 4.5mm.
Overall length: 240mm.
Balancing: backward
Weight: 158g.
Sheath: Belt, Nylon, with front pocket

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Italy
Blade: Stainless Sleipner 60 / 61HRC
Blade treatment: Satin
Handle: Titanium 6Al4V monolithic
Blade length: 94mm.
Blade thickness: 4.5mm.
Overall length: 211mm.
Thick when closed: 9mm.
Weight: 187g.
Lock: Frame Lock with steel casement and security system Rotoblock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with leather belt sheath
Notes: Opening system Carson Flipper on ball bearings

Winner in 2016 at the Blade Show in Atlanta as "Overall Knife of the Year"

Metamorphosis handle: it is an aluminum handle with a special heat-sensitive coating. Normally the handle is black, but when the temperature reaches 22-23 ° C, it changes color! If you hold the knife in your hand for a couple of minutes, the black handle will become Camouflage.

Given the production difficulty of the handle and the extreme delicacy of the same, the production of this variant ceased definitively in 2017. The first production was characterized by the presence of the clip, the second production proposed a knife without a clip, but accompanied by a sheath a leather.

Intended use: Sports / EDC

Type of production: Industrial
Lama production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Stonewashed
Handle: Aluminum with titanium spacers
Blade length: 87mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Weight: 175g.
Closure: Liner Lock
Sheath: in leather, with automatic button and belt loop for vertical port
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Molletta - Carson Flipper opening system - Opening on IKBS ball bearings

VALUTAZIONE DEL PRODOTTO

Stato di Conservazione / Grade of preservation: A+
Scatola e certificati / Box and papers: Y
Reperibilità / Availability: B
Valore storico / Historical value: A
Valore collezionistico / Collectible value: B

CLICCA QUI per leggere e conoscere i nostri criteri di valutazione

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: Stainless Sleipner 60 / 61HRC
Blade treatment: Stone Washed
Handle: Stainless Steel and Black G10, titanium spacers
Blade length: 87mm.
Blade thickness: 4.5mm.
Overall length: 210mm.
Weight: 160g.
Lock: Liner Lock
Clip: -
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Peg - Carson Flipper opening system - opening on ball bearings IKBS

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: Stainless Sleipner 60 / 61HRC
Blade treatment: Stone Washed
Handle: Stainless Steel and Black G10, titanium spacers
Blade length: 87mm.
Blade thickness: 4.5mm.
Overall length: 210mm.
Weight: 160g.
Lock: Liner Lock
Clip: -
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Peg - Carson Flipper opening system - opening on ball bearings IKBS

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: Stainless Sleipner 60 / 61HRC
Blade treatment: Stone Washed
Handle: Stainless Steel and Black G10, titanium spacers
Blade length: 87mm.
Blade thickness: 4.5mm.
Overall length: 210mm.
Weight: 160g.
Lock: Liner Lock
Clip: -
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Peg - Carson Flipper opening system - opening on ball bearings IKBS

Intended use: Tactical / Collection

Type of production: custom
Country of Origin: USA
Blade: handcrafted by Rick Hinderer, CPM-S35VN 61 / 62HRC stainless steel, with double concave beveling
Blade treatment: Hand satin
Handle: grip plate in the liner thickness of titanium 1mm 6AL4V 3.5mm carbon fiber with blue anodizing. Frame titanium blue anodized 6AL4V, billet, thick 4.5mm with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 100mm.
Blade thickness: 4.5mm.
Closed Length: 135mm.
Overall length: 233mm.
Thick when closed: 15mm.
Weight: 210g.
Lock: Frame Lock type
Clip: blue anodized titanium
Notes: Lanyard black paracord with titanium wire stop 6AL4V blue anodized, billet, with a diameter of 9mm, custom by Rick Hinderer

Destinazione d'uso: Caccia/Sportivo

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -