Knife - Essential Tool for Camping, Outdoor Adventure and collection
-
Hollywood Collectibles Group - Rambo III knife - SIGNATURE John Rambo - Knife
Official reproduction, made under film license by Hollywood Collectibles, of the knife used in the film "Rambo III". This model features a signature on the blade of John Rambo and is a limited edition.
Intended use: Survival/Collection
Blade: 420J2 stainless steel
Country of production China
Handle: in wood, with stainless steel guard and knob
Blade length: 320mm.
Blade thickness: 5.5mm.
Total length: 455mm.
Balancing: advanced
Weight: 922g.
Sheath: leather
Notes: Official reproduction under cinematographic license
Limited Edition: blade and scabbard signed "John Rambo", limited and numbered edition made in 10,000 copiesRB9425 -
Boker - TRPPR Trapper - MagnaCut & Curly Birch - 112098 - Pocket Knife
Intended Use: Sporting/collection
Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and birch root
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening systemBO-112098 -
Lurisinga - Gallurese Razor Blade - Traditional Gallura Knife - Handcrafted Knife
The "Lurisinca," a traditional knife from Luras in Gallura, owes its name to the Lurese term for a local woman, reflecting the feminine nature of the "razor blade" used. The Gallurese Razor Blade, a typical Sardinian knife resembling a point-less shaving razor, was essential in cork processing, especially for making "quadretti," precursors to cork stoppers. However, this practice has declined due to the economic crisis, forcing many craftsmen to close their shops. The Gallurese Razor Blade, versatile and always at hand, represented an indispensable tool for every daily need.
Type of Production: Handcrafted
Blade Production: Italy
Blade: Stainless steel
Handle: Bovine horn tip
Blade Length: 80mm.
Blade Thickness: 2mm.
Closed Length: 90mm.
Total Length: 185mm.
Weight: 65g.
Lock: No blade lock
Packaging: Cardboard boxLU-GAL€77.87Only 2 left -
Livio Montagna - 2017 Fighter - N690Co & Snake Wood - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPFD -
Fox - Tokala Fixed Knife - Bison Micarta - FX-105MB - Design by Reichart Markus - knife
Intended use: Utility / Tactical / Outdoor
Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -FX-105MB -
Roselli - Hunting Nalle knife - UHC steel - RW200A - handcrafted knife
This handmade Finnish hunting and outdoor knife is an exclusive version of the classic "Hunting" model and has a unique reindeer horn shape and decoration.
It was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for working larger game such as moose, wild boar and deer. The design and profile of the blade are excellent for skinning game.
The blade is made of UHC (Ultra High Carbon) steel and the handle decorated with reindeer antlers is curly birch, stained and coated with linseed oil, which ensures a firm grip, even when wet. UHC steel makes the knife extremely sharp for a long time.
Comes with a handcrafted sheath of dark vegetable tanned Finnish leather in combination with stained curly birch, for a unique look. Made, sharpened in collaboration with knife maker Kari Ohtonen.
Intended use: Hunting/Sports/Collection
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 235mm.
Balancing: -
Weight: 130g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather with reindeer antlers
Note: -RO-RW200A -
Fox - Spore - mushroom knife - olive wood - FX-409OL - Fungaiolo
Intended use: Mushroom knife
Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo GobbatoFX-409-OL -
Mcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0145G -
Fallkniven - P3Gic Folding Knife - Desert Ironwood - knife
Intended use: sporting
Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -F-P3Gic -
Fallkniven - RL1di knife - Desert Ironwood - knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.
Intended use: collection / sports
Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:F-RL1DI -
Opinel - Walnut Wood - 8 steel - knife
intended use: sports / collection
type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinelop-8lun -
G. Sakai - Bird and Trout Tennessee Memorial by Masao Takahashi - 5004/P - Vintage Knife
Intended use: hunting / collection
Production Type Semi-Handmade
Blade: ATS-34 stainless steel
Country of production: Seki - Japan
Handle: micarta with brown heads in brushed stainless steel
Blade length: 65mm.
Blade Thickness: 2.5mm.
Overall length: 158mm.
Closed Length: 94mm.
Locking system: back lock
Weight: 46g.
Sheath: leather, hand-stitched
Packaging: cardboard box with logos G.Sakai
Notes: Knife of the late '90s, new, in excellent condition12575 -
Conaz Consigli Scarperia - Piemontese knife in polished ox - 50046 - knife
Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
PIC-18 -
Condor - Ascia integrale - coltello
Produttore: Condor - Italy
lunghezza totale: 30 cm
lunghezza lama: 9,5 cm
lunghezza manico: 11,5 cm
peso: 697 gr
tipo acciaio: 420 inox
materiale impugnatura: micarta
note: fodero in cuoio7202€49.18Only 2 left -
Down Under Knives - Kookaburra Throwing Knives DUK-KB - Throwing Knives
Set of two throwing knives with sheath
Intended use: Throwing / Outdoor
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel - 52HRC
Handle: Leather
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 305mm.
Weight: 358g.
Sheath: Leather, crocodile-like
Packaging: Cardboard box with Down Under logosL446017 -
Down Under Knives - Red Rock Raptor Kukri Machete - L446026 - knife
Intended use: Kukri/Heavy Utility
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with differential tempering 59/46HRC
Blade Treatment: Mirror polishing
Handle: Brass and leather rings
Blade length: 260mm.
Blade thickness: 5.5mm.
Total length: 395mm.
Weight: 690g.
Sheath: Leather, reptile-likePackaging: Cardboard box with Down Under logos and warranty certificates
L446026 -
Hollywood Collectibles Group - Rambo III knife - Sylvester Stallone Limited Edition - Knife
Officially licensed Hollywood Collectibles reproduction of the knife used in the Rambo III film
Intended use: Survival / Collection
Blade: 420J2 stainless steel
Country of production China
Handle: in wood wood, with guard and knob in stainless steel
Blade length: 320mm.
Blade thickness: 5.5mm.
Total length: 455mm.
Balancing: advanced
Weight: 922g.
Sheath: leather
Notes: Official reproduction under cinema license
Limited Edition: autographed blade and scabbard "Silvester Stallone", limited and numbered edition made in 10,000 copiesRB9297 -
Maserin - Champignon Bubinga - 808/LG - coltello per funghi
Lama: in acciaio inox 440A adatta anche per funghi di piccole dimensioni
Manicatura: legno di bubinga
Lunghezza lama: 60mm.
Spessore lama: 2mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 190mm.
Peso: 110g.
Chiusura: molla di ritenzione
Note: Moschettone per trasporto rapido e sicuro - Pennello posteriore in setole naturali di tasso, richiudibile sul manicoMA-808/LG -
Maserin - Knife Mushrooms - Rosewood - 806/LG
Intended Use: Knife Mushrooms
Blade: Stainless steel 440
Handle material: Rosewood
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 138mm.
Total length: 208mm.
Balance: -
Weight: 95g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: brush hair Exchange - inch and tweezersMA-806/LG -
Piscitelli - Ciociaro horn tip hammered blade - CIO01/2 - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: like new
- Available in commerce: NO - the craftsman stopped producing knives a few years ago
- Sharpening: Original
- Marks on blade: NO
- Marks on handle: NO
- Packaging: YES
- Checked and Certified by our internal laboratory
It has a slender blade and a curved handle. It originates from very ancient models. It was a very common knife among the shepherds of southern central Italy. The handle is made of full horn.
Features:
- steel: AISI 420
- hardness: 54/56 HRC
- total length: 20.5cm
- blade length: 9cm
- blade thickness: 2mm
- weight: 60gr
- fittings: horn tip
- notes: handcrafted - accompanied by a warranty certificate
Piscitelli has been making knives in Frosolone for three generations, a small town in the Molise hinterland known for its knife-making. The Art, Style, and Tradition allow us to give importance and originality to our creations handed down from generation to generation.
Giovanni Piscitelli, born in Frosolone (IS). The passion for collection and hunting knives I inherited from my father (master craftsman) from whom I also inherited the most sophisticated techniques. My knives are unique pieces, strictly handcrafted.
When producing a knife, there are many elements that make a difference. In addition to a difference in value in the choice of materials, it is the labor required to perform certain operations, closely connected to the construction complexity that makes the knife more valuable. The reasons that justify the differences can also lie in the processing of the blade, or of the handle (elements that it is good to remember are modeled and finished exclusively by hand).
CIO01/2€131.15Only 1 left -
Piscitelli - Hunting horn hammered blade - CCC03/2 - artisanal knife
Piscitelli - Hunt horn hammered blade - CCC03/2 - handmade knife KNIFE WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: like new
- Available in commerce: NO the craftsman stopped producing knives a few years ago
- Sharpening: Original
- Marks on blade: NO
- Marks on handle: NO
- Packaging: YES
- Checked and Certified by our internal laboratory
Typical knife for the hunter. It is a robust and concrete knife. The tip is slightly lowered to work in cavities, and the blade has a deep curve for skinning.
Features:
- steel: AISI 420
- hardness: 54/56 HRC
- total length: 18cm
- blade length: 7.5cm
- blade thickness: 2mm
- weight: 68gr
- fittings: horn
- notes: handcrafted
- accompanied by a warranty certificate
Piscitelli has been making knives in Frosolone for three generations, a small town in the Molise hinterland known for its knife-making. The Art, Style and Tradition allow us to give importance and originality to our creations handed down from generation to generation.
Giovanni Piscitelli, born in Frosolone (IS). The passion for collection and hunting knives I inherited from my father (master craftsman) from whom I also inherited the most sophisticated techniques. My knives are unique pieces, strictly handcrafted.
When producing a knife, there are many elements that make a difference. In addition to a difference in value in the choice of materials, it is the labor required to perform certain operations, closely connected to the construction complexity that makes the knife more valuable. The reasons that justify the differences can also lie in the processing of the blade, or of the handle (elements that it is good to remember are modeled and finished exclusively by hand).
CCC03/2€118.85Only 1 left -
Roselli - Hunting knife - UHC steel - RW200 - handcrafted knife
The "first" Roselli, with a minimalist design equal to that which was produced in 1976. For over 45 years it has been perfect for specific use in the outdoor environment, for hunting, fishing and life in the open air.
This handmade Finnish hunting and outdoor knife was originally developed as a hunting knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip even when wet. UHC steel produces an extremely sharp knife that retains its sharpness for a long time. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 230mm.
Balancing: -
Weight: 115g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather
Note: -RO-RW200 -
Tonerini - caccia fisso - coltello
Produttore: Tonerini - Scarperia Italy
lunghezza totale: 21,5 cm
lunghezza lama: 11 cm
peso: 80 gr
tipo acciaio: 420 inox
materiale impugnatura: legno
note: fodero in cuoio7203€22.13Only 1 left -
Fallkniven - FH9 Braun Micarta - Knife
Type of production: Industrial
Blade: 3G laminated steel three-layer (VG2 SGPS and "Super Gold Powder Stainless Steel" to 62 HRC)
Blade treatment: -
Production Lama: Sweden
Handle: Stainless Steel 420J2 and brown micarta
Blade length: 67mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Overall length: 157mm.
Weight: 90g.
Closing: Lockback
Clips: stainless steel
Notes: -F-FH9 -
Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L-ENEBAVFM -
Viper - Katla by Vox - Black Canvas Micarta - V5982CB - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, featuring a Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotating mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.
The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern key, the inlays of the classic Viper models.
The flat edges and the titanium clip allow for comfortable and discreet carry.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60/61HRC
Blade finish: Stonewashed
Handle: Walnut
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 107g.
Lock: Liner Lock
Clip: Titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearingV5985NO -
Wander Tactical - Mountain Lion knife - Marble finish and dark brown micarta - artisan knife
Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 135mm.
Blade thickness: 5.5mm.
Total length: 250mm.
Balancing: advanced
Weight: 377g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-MLK-MB -
Wander Tactical - Uro Saw Marble knife - Brown Micarta - handcrafted knife
The Wander Tactical Uro Saw knife is an extremely robust and versatile survival knife. The blade is made of D2 steel, which ensures a long life and good resistance to wear and corrosion. The length of the blade is approximately 16 cm and has a serration on the top
The handle of the knife is made of micarta, a resistant and non-slip material that guarantees a secure grip even in humid or sweaty conditions. The length of the handle is approximately 13cm and features an ergonomic design, making it very comfortable to hold even for extended periods.
The Uro Saw knife comes with a Kydex sheath, which protects and keeps it safe during transport. Furthermore, the scabbard can be easily attached to a belt or trousers thanks to its quick release system.
In summary, the Wander Tactical Uro Saw knife is a great choice for those looking for an extremely robust and versatile survival knife, very interesting for camping, hiking and survivalism enthusiasts.
Intended use: Utility / Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 430g.
Sheath: in thermoformed kydex, with double belt loop, M.O.L.L.E. compatible
Packaging: without packaging, accompanied by certificate of authenticity, version with hallmark with WT and DP marks
Notes: Each knife is unique and made entirely by handWT-URS-MBM -
Wander Tactical - Lynx knife - Raw & Brown Micarta - D2 - custom knife
The Wander Tactical Lynx knife is an excellent option for anyone looking for a robust and reliable knife. The blade is made of D2 steel, which offers good resistance to wear and corrosion. The length of the blade is approximately 10cm and has a clip point shape, making it ideal for many outdoor activities.
The handle of the knife is made of micarta, a resistant and non-slip material that offers excellent grip even in humid or sweaty conditions. The length of the handle is approximately 12cm which gives a good balance to the knife, making it easy to handle and control.
The Lynx knife comes with a Kydex sheath, which protects and keeps it safe during transport. In addition, the cover can be easily attached to a belt or trousers thanks to its quick fastening system.
Overall, the Wander Tactical Lynx knife is an excellent choice for anyone looking for a reliable and durable knife for outdoor activities. With its sturdy blade, non-slip handle and Kydex sheath, the Lynx knife is a very attractive option for hikers, campers and outdoor enthusiasts.
Intended use: utility / bushcraft
Type of Production: Artisanal
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backwards
Weight: 260g.
Sheath: kydex
Packaging: -
Notes: Each knife is unique and handcraftedWT-LY-RBM23 -
Laguiole En Aubrac - Raw Buffalo Horn with Damascus Steel Blade - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0512CBI/FDBI1 -
La Cantina - Little Jones PVD custom knife - Sleipner Steel - Black Birch and Fatcarbon - handmade knife
Type of production: Artisan
Country of production: Italy
Blade: 60HRC Sleipner Steel
Blade Finish: PVD
Handle: Black Stabilised Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balance: on the guard branch
Weight: 360g.
Scabbard: hand worked and sewn leather
Packaging and certificate: Cordura pouch and certificate of authenticity
Notes: unique knife handcrafted for Coltelleria Collini in Busto Arsizio - no. 256LC-LJ-FCG -
Roselli - Grandfather knife - UHC steel - RW220 - handcrafted knife
This handmade Finnish hunting knife is the shorter version of the classic "hunting knife". Extremely popular model due to its handy size which makes it easy to carry anywhere.
The slightly curved and short blade is particularly useful and comfortable for hunting use.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip, even when wet. The UHC steel gives the knife a very long edge life - please note that the hard UHC steel is not suitable for penetrating bone or other hard materials. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: -
Total length: 200mm.
Balancing: -
Weight: 100g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-RW220 -
Fox - Spore - mushroom knife - Eucalyptus wood - FX-409 - Mushroom
Intended use: Mushroom knife
Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo GobbatoFX-409 -
Gerber - 425 Hunting Knife - Vintage 1972 - PRIVATE COLLECTION - knife
Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Hunting
Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - UnpackedGE-425HKV -
Tops - Rocky Mountain Spike - Sandstorm Bronze - knife
The Rocky Mountain Spike is the result of several months of testing and fine-tuning in the field. The original design was to flank or add a large knife, such as a TOPS Machete or Power Eagle, to offer the user a variety of other applications on smaller projects. The size and steel mass of large knives certainly have their place. However, every once in a while a situation arises where one wishes to have a smaller knife, and particularly one with a narrow blade.
After using and abusing the prototypes in the field, those who have tested the small Rocky Mountain have seen a wide variety of cutting, scraping, splitting, EDC, and separating tasks for which this tool can be used effectively.
We now believe that the Rocky Mountain Spike is an excellent stand-alone toolfor hikers, bikers, campers, boaters, weekend outdoor enthusiasts, and long trips. It can be worn on your belt or kept in your backpack, boot or any other convenient place. Whether it is for general outdoor activities, at work or at home, this is the tool for you.
Intended Use: Utility
Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Sandstorm Bronze
Handle: 1095 58/60HRC steel
Blade length: 8.9mm.
Blade thickness: 4.5mm.
Total length: 185mm.
Balance: on the guard branch
Weight: 70g.
Sheath: leather
Packaging: transparent plastic bag
Notes: emergency whistleTPRMS01 -
Boker - Barlow BFF by Lucas Burnley - 120506 - knife
Intended Use: Utility / Hunting
Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang stainless steel AEB-L
Blade finish: Satin finish
Handle: Walnut Briar
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 153mm.
Weight: 65g.
Scabbard: leather, with clip attack
Package: cardboard box with Boker logos
Notes: Design by Lucas BurnleyBO-120506 -
Wander Tactical - Lynx - Raw & Brown Micarta - custom knife
Intended Use: utility / bushcraft
Type of Production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 260g.
Sheath: kydex
Package: -
Notes: Each knife is unique and handcraftedWT-LY-RBM -
BlackJack - Model 5 knife - A2 - Green Canvas Micarta - outdoor knife
Intended use: hunting / sports / collection
Type of production: industrial
Blade: A2 carbon steel
Production Lama: USA
Handle: Green Canvas micarta
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -
Weight: 262g.
Closure: -
Clip: -
Sheath: Brown Leather
Notes: made by Bark RiverBCB5GM -
Wander Tactical - Tryceratops XL El Carnicero - Raw & Brown Micarta - custom knife
Intended use: Hard Utility / Collection
Type of production: Handmade
Country of production: Italy
Blade: 59 / 60HRC D2 steel
Blade finish: Raw
Handle: Micarta
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balancing: advanced
Weight: 475g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-TXL-RB -
White River Knife & Tool - Hunter Black Micarta knife - HNT-MBL - knife
Coltelleria Collini is the official distributor for Italy of White River Knife & Tool knives
Intended use: Hunting / Sports
Type of production: Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 109g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -WRHNT-MBL -
Wander Tactical - Tryceratops Compound knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the type of foreign steel and the laminated structure.
Tryceratops Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbonaceous) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: backward
Weight: 184g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.WT-TR-VT-C -
Zero Tolerance - ZT0055BRZ - Bronze Titanium - Sprint Run - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: blackwash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thickness when closed: -
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run Edition available while stocks last - Design by Gustavo T. GTC Knives Coppers - KVT opening on ball bearings - SLT opening system Spring Loaded TabZT0055BRZ -
Takeshi Saji - Bamboo knife SJ262 - artisan knife
Intended use: Collection / Sports
Type of production: Artisan
Lama production: Japan
Blade: Forged by hand, in Hitachi Shirogami 64HRC carbon steel
Blade treatment: -
Handle: traditional Japanese bamboo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: -
Total length: 215mm.
Thickness when closed: -
Balancing: -
Weight: 80g.
Closure: -
Clip: -
Sheath: bamboo wood
Packaging: Carton box
Notes: entirely handmade by Takeshi SajiSJ262 -
Andre De Villiers ADV - Impi Back Lock Knife Rosewood - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: Satin
Handle: Steel with Rosewood wood inserts
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 164g.
Opening: Nail Nick
Closing: Back Lock
Clip: -
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-IM-RW -
Nepal kukri - Sirupate 15 - WITH ENGRAVING - wooden handle - Nepali Knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmadeSIRU-15-INCISO -
Zero Tolerance - ZT0462 - Sinkevich Flipper - Bronze Carbon Fiber - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-S20CV stainless steel
Blade treatment: Satin
Handle: Titanium and bronze-colored carbon fiber
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 225mm.
Weight: 107g.
Closure: Framelock
Clip: Removable and reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Carson Flipper opening systemZT0462 -
Ka-Bar - Jarosz Globetrotter Tactical Knife - 7502 - knife
Intended use: Tactical / Utility
Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: Ultramid
Blade Length: 89mm.
Blade thickness: 4.2mm.
Overall length: 192mm.
Balance: backward, 2 cm from the lower guard branch
Weight: 181g.
Sheath: in Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Jesse JaroszKB-7502 -
Ka-Bar - Jarosz Turok Tactical Knife - 7503 - knife
Intended use: Tactical / Utility
Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydexKB-7503 -
Kershaw - Emerson CQC-11K Wave Framelock - 6031 - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Blade Treatment: Stone Washed
Blade production: China
Handle: Stainless Steel and G10
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 121mm.
Total length: 216mm.
Thickness of handle: 10mm.
Weight: 166g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Opening through a Wave system or with a spacer opening (removable) - Design by Ernest R. EmersonK6031 -
Wander Tactical - Pterodactyl Hawk - Black Blood & Black Micarta - custom axe
Type of production: Artisan
Production Country: Italy
Blade: D2 steel at 59 / 60HRC
Blade Treatment: Black Blood
Manicure: Black Micarta
Head Size: 90mm (sharp) x 208mm
Thickness: 6.5mm.
Total Length: 370mm.
Balancing: advanced
Weight: 982g. (1.114g with sheath)
Sheath: in Kydex, thermoformed
Packing: -
Notes:WT-PTERO -
Wander Tactical - Lynx - Tanto Special Edition - Raw and Dark Brown Micarta - knife
Type of production: handmade
Production Country: Italy
Blade: D2 steel 59 / 60HRC
Treatment: Raw
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.5mm.
Overall length: 220mm.
Balancing: backward
Weight: 338g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; there may be slightly different from the one shown in the picturesWT-LY-TSP -
Lionsteel - M1 - Walnut Wood - M1WN - Knife
Type of use: hiking / hunting / light utility
Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang, stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Walnut wood
Blade Length: 73mm.
Blade thickness: 3.2mm.
Total Length: 170mm.
Balancing: on guard branch
Weight: 75g.
Sheath: leather, with vertical waistband
Packing: Cardboard box with Lion Steel logos
Notes: "Titanium Pearl" attached to the latch in paracordLS-M1WN -
Wander Tactical - Megalodon Hunter Special Edition - custom knife
Type of production: Artisan
Blade production: Italy
Blade: D2 steel to 59 / 60HRC
Blade Treatment: Desert
Manicure: Micarta Brown
Blade Length: 130mm.
Blade thickness: 5.5mm.
Total Length: 285mm.
Balancing: backward
Weight: 394g.
Sheath: in Kydex, thermoformed
Packing: -
Notes: Special Edition made in one single "One of a Kind"WARNING: DO NOT USE THIS KNIFE FOR HIGH IMPACT ACTIVITIES AS CHOPPING AND BATONING, WHICH MAY CAUSE DAMAGE TO THE EDGE AND/OR POINT. ITS PARTICULAR STRUCTURE MAKES IT IDEAL FOR PRECISION CUTTING AND HUNTING.
WT-ME-H -
Fox - Fairbairn Sykes Fighting Knife - PVD Walnut - FX-592W - knife
The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.
WARNING: The blade leaves the factory without any type of sharpening, so that this product is sold and released in accordance with current regulations in force in Italy.
Purpose: collecting
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: PVD
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: Rearranged
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Sharpening blade - design by Hill KnivesFX-592W -
Fox - Fairbairn Sykes Fighting Knife - Satin Walnut - FX-593 - knife
The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.
WARNING: The blade leaves the factory unsharpened / with dull edge; due to italians current regulations and law restrictions.
Purpose: collection
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: Satin
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: -
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Design by Hill Knives - blade with dull edge / unsharpened due to italian law restrictionsFX-593 -
Nepal kukri - Sirupate 16 wooden handle - Knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handne-siru-16 -
Takeshi Saji - Hanta Hunter Knife 180 - Craft Knife
Purpose of use: Collection / Sportsman / Machete
Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Wood covered with leather strip
Blade Length: 175mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 315mm.
Closure thickness: -
Balance: -
Weight: 98g.
Closure: -
Clip: -
Sheath: Leather treated
Packing: Carton box
Notes: Hand made entirely by Takeshi SajiTS-H180 -
Wander Tactical - Mistral - Black Blood Finish con micarta Dark Wood - handmade knife
Intended use: Tactical / Collection
Type of production: Artisan
Blade production: Italy
Blade: D2 steel to 59 / 60HRC
Blade Treatment: Raw
Manicure: Dark Wood Micarta
Blade length: 118 mm.
Blade thickness: 6.5mm.
Total length: 240mm.
Balance: backward, about 2 cm
Weight: 330g.
Sheath: in Kydex, thermoformed, with a Tek-Lok attachment
Packing: -
Notes: entirely hand made in all its partsWT-MI-DW -
Wander Tactical - Mistral - Raw & Dark Brown Micarta - handmade knife
Intended use: Tactical / Collection
Type of production: Handmade
Production Country: Italy
Blade: D2 steel quenching cryogenic
superficiake treatment: Raw
Handle: Dark Brown Micarta
Blade length: 118 mm.
Blade thickness: 6.5 mm.
Overall length: 240 mm.
Balancing: backward, to 2cm from the guard branch
Weight: 352 g.
Sheath: Handmade, Kydex thermoformed with Tek-Lok attack
Packaging: -
Notes: entirely hand made in all its partsWT-MIST-DB -
Cold Steel - Recon 1 Tanto - Dark Earth - 27TLSVF - knife
Intended use: Sports / Tactical
Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Closed Length: 136mm.
Overall length: 238mm.
Thick when closed: 13mm.
Weight: 147g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -C27TLSVF -
Wander Tactical - Scrambler - Ice Brush & Darkwood Micarta - Custom Knife
Occupation: EDC / Light Utility / All Round
Type of production: Handcrafted
Production Country: Italy
Blade: integral, steel D2 59 / 61HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 82mm.
Blade thickness: 5mm.
Overall length: 200mm.
Balancing: backward
Weight: 175g.
Sheath: Kydex, thermally compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight differences of finishes, colors and materials from product photographedWT-12657 -
Opinel - 10 effilé - Ebony of Mozambique - stainless steel blade - knife
Intended use: sports / collection
Type of production: Industrial
Production blade: France
Blade: stainless steel Sandvik 12C27
Blade treatment: Satin
Handle: Ebony of Mozambique
Blade length: 82mm.
Blade thickness: 1.2 mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 52g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with logos Opinel
Notes: Limited Edition, not numbered, 2000 copiesop-10efeb -
Wander Tactical - Uro - Satin SanMai CoS & Dark Brown Micarta - custom knife
In collaboration with WANDER TACTICAL we decided to bring their tactical model URO in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Occupation: Tactical / Utility
Type of production: Artisan
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.8mm.
Overall length: 295mm.
Balancing: backward
Weight: 475g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-URO-CDB -
Wander Tactical - Lynx - Satin SanMai CoS Convex & Dark Brown Micarta - custom knife
In collaboration with Tactical Wander we decided to bring them light utility, the Lynx model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Occupation: Light Utility / All Round
Type of production: Artisan
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.8mm.
Overall length: 220mm.
Balancing: backward
Weight: 360g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.COS-LY-BF -
Nepal kukri - Sirupate 17 wooden handle - knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-siru17 -
Kukri nepal - Nepal Army 007 horn handle - knife
Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.ne-army-c -
Kukri nepal - Dhankute 16 wooden handle 010 - Knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-dhan16 -
Nepal kukri - Sirupate 15 wooden handle 009 - Knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-sir-15 -
Kukri nepal - Balance 006 wooden handle - knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-bal-l -
Wander Tactical - Tryceratops Hollow Grind - Antique Shadow & Dark Burgundy Micarta with alluminum Pin Tube - custom knife
Wander Tactical - Tryceratops Earth & Desert Micarta - custom knife
Intended use: Tactical / Collection
Type of production: Artisan
Production Lama: Italy
Blade: Stainless D2 59 / 60HRC
Treatment Lama: Earth Kote
Handle: Desert Micarta
Blade length: 65 mm.
Blade thickness: 5.5 mm.
Overall length: 132 mm.
Balancing: back
Weight: 176 g.
Sheath: Artisan, Kydex black Contek-Lok
Packaging: -
Notes: every knife is unique as it is handmade, might therefore be small differences / inaccuracies with respect to the photographed model, also with regard to colors of blade and handle.12632 -
Wander Tactical - Dimorphodon Antique Shadow - Dark Burgundy Micarta - custom knife
The Dimorphodon is a pure cutting instrument, is the evolution of a modern twist of the classic American frontier knife.
Intended use: Tactical / Collection
Type of production: Artisan
Production Country: Italy
Blade: Steel D2
Blade treatment: GunKote
Handle: micarta
Blade length: 200 mm.
Blade thickness: 6.5 mm.
Overall length: 347 mm.
Balance: on guard branch
Weight: 595g.
Sheath: Hand-crafted Kydex thermoformed
Packaging: -
Notes: each knife is unique as it is handmade, there may therefore be slight differences / inaccuracies with respect to the photographed model, also with regard to the blade and handle colors.12626